Engineering Commons^™

An Analysis Of Resistance Spot Weld Quality Based On Acoustic And Electrical Signatures, Ivan Charles Butler

Theses and Dissertations--Manufacturing Systems Engineering

The union of a set of materials by way of Resistance Spot Welding is designed so that once fused together, a substantial amount of intentional, external force must be applied to separate the contents. Therefore, Resistance Spot Welding is often the preferred fusion method in high-volume manufacturing processes. The result of Resistance Spot Welding however is the formation of a weld nugget which is not visible to the naked eye. Destructive and/or ultrasonic methods applied off-line must be used to determine the quality of each weld; both inefficient and expensive processes. The following research analyzes the data fed back during …

Implementation And Analysis Of True Lean In A Startup Company By Using Pdca Model, A Case Study In A Manufacturing Venture, Ankit Jangid

Theses and Dissertations--Manufacturing Systems Engineering

The purpose of this research is to implement and analyze the true lean transformation in a manufacturing start-up organization. Often, lean transformations are observed in developed manufacturing organizations having sophisticated production lines and numerous employees, where lean tools are utilized to reduce waste while increasing profit. However, this type of transformation is narrowly focused on quantifiable process results and falls short of the ultimate goal, establishing a true lean culture within the organization. As a result, it is recommended that true lean principles, philosophies, culture, operations environment and tools be applied at the very beginning stages of an organization, or …

Investigation Of Chip-Form And Tool-Wear In Turning Of Hardened Af9628 Alloy Under Various Cooling And Lubrication Conditions, Jason Wolf

Theses and Dissertations--Manufacturing Systems Engineering

Next generation defense and commercial applications for structural steels require new alloys that eliminate or reduce critical elements from their composition to lower cost and improve manufacturability, while maintaining or exceeding high strength and toughness requirements. A new alloy, denoted as AF9628, has recently been developed for this purpose and its manufacturing characteristics and the material response in component manufacturing must be fully understood.

In the present study, hardened AF9628 alloy was turned with a coated carbide cutting tool under fixed cutting speed, feed rate, and depth of cut parameters. This work focuses on chip-form and tool-wear analysis to understand, …

Kentucky Water Resources Research Institute, University Of Kentucky: Annual Technical Report 2018, Kentucky Water Resources Research Institute, University Of Kentucky

KWRRI Annual Technical Reports (USGS’s 104b Grant Program)

In 2018, KWRRI launched a new website, https://www.research.uky.edu/kentucky-water-resources-research-institute, to better meet the needs of its stakeholders. KWRRI also established a repository for KWRRI’s reports, https://uknowledge.uky.edu/kwrri/. The repository includes historical KWRRI reports, annual symposium proceedings, technical reports, and the Water Distribution System Research Database. During the reporting period, KWRRI produced two editions of its semi-annual newsletter (Spring 2018 and Winter 2019). The newsletter provides updates, facilitates information sharing, and increases communication among those in the Kentucky water community. The 2019 Kentucky Water Resources Annual Symposium was held on March 25, 2019, in Lexington, Kentucky. The day-long symposium, attended by …

Incorporating Battery Energy Storage Systems Into Multi-Mw Grid Connected Pv Systems, Vandana Rallabandi, Oluwaseun M. Akeyo, Nicholas Jewell, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper analyzes the configuration, design, and operation of multi-MW grid connected solar photovoltaic (PV) systems with practical test cases provided by a 10-MW field development. In order to improve the capacity factor, the PV system operates at its maximum power point during periods of lower irradiance, and the power output is limited to a rated value at high irradiance. The proposed configuration also incorporates a utility scale battery energy storage system (BESS) connected to the grid through an independent inverter and benefits of the experience gained with a 1-MW 2-MWh BESS large demonstrator. The BESS power smoothing and frequency …

Deterioration Modelling Of Bridges On Brm 5.2.3, Sudhir Palle, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) initiated the study KYSPR 17-532, “Deterioration Modelling of Bridges on BrM 5.2.3,” so it could receive assistance identifying and employing bridge deterioration and cost forecast modeling for its bridge maintenance program. The Kentucky Transportation Center (KTC) was to help coordinate KYTC in adapting BrM 5.2.3’s deterioration and cost modelling features and update the existing guide material to reflect all changes for BrM 5.2.3. This study included acquiring access and becoming familiar with AASHTO Bridge Management (BrM 5.2.3) software. It was also to explore opportunities for any training on BrM and BrM 5.2.3’s deterioration and cost …

Kentucky Traffic Collision Facts 2018, Eric R. Green, Paul A. Ross, Christopher L. Blackden, Kentucky State Police

Kentucky Transportation Center Research Report

KENTUCKY’S TRAFFIC COLLISION FACTS report is based on collision reports submitted to the Kentucky State Police Records Branch. As required by Kentucky Revised Statutes 189.635, “every law enforcement agency whose officers investigate a vehicle accident of which a report must be made...shall file a report of the accident...within ten days after investigation of the accident upon forms supplied by the bureau.” The stated purpose of this requirement is to utilize data on traffic collisions for such purposes as will improve the traffic safety program in the Commonwealth. Data contained in this report are based solely on the observations and judgements …

Connecting The Pieces: How Low Back Pain Alters Lower Extremity Biomechanics And Shock Attenuation In Active Individuals, Alexa Johnson

Theses and Dissertations--Rehabilitation Sciences

Low back pain in collegiate athletes has been reported at a rate of 37% from a wide array of sports including soccer, volleyball, football, swimming, and baseball. Whereas, in a military population the prevalence of low back pain is 70% higher than the general population. Compensatory movement strategies are often used as an attempt to reduce pain. Though compensatory movement strategies may effectively reduce pain, they are often associated with altered lower extremity loading patterns. Those who suffer from chronic low back pain tend to walk and run slower and with less trunk and pelvis coordination and variability. Individuals with …

A Brain-Computer Interface For Closed-Loop Sensory Stimulation During Motor Training In Patients With Tetraplegia, Sarah Helen Thomas

Theses and Dissertations--Biomedical Engineering

Normal movement execution requires proper coupling of motor and sensory activation. An increasing body of literature supports the idea that incorporation of sensory stimulation into motor rehabilitation practices increases its effectiveness. Paired associative stimulation (PAS) studies, in which afferent and efferent pathways are activated in tandem, have brought attention to the importance of well-timed stimulation rather than non-associative (i.e., open-loop) activation. In patients with tetraplegia resulting from spinal cord injury (SCI), varying degrees of upper limb function may remain and could be harnessed for rehabilitation. Incorporating associative sensory stimulation coupled with self-paced motor training would be a means for supplementing …

A Possible Link Between R-Wave Amplitude Alternans And T-Wave Alternans In Ecgs, Sahar Alaei

Theses and Dissertations--Biomedical Engineering

Sudden Cardiac Death (SCD) is the largest cause of natural deaths in the USA, accounting for over 300,000 deaths annually. The major reason for SCD is Ventricular Arrhythmia (VA). Therefore, there is need for exploration of approaches to predict increased risk for VA. Alternans of the T wave in the ECG (TWA) is widely investigated as a potential predictor of VA, however, clinical trials show that TWA has high negative predictive value but poor positive predictive value. A possible reason that TWA has a large number of false positives is that a pattern of alternans known as concordant alternans, may …

Calibrated Short Tr Recovery Mri For Rapid Measurement Of Brain-Blood Partition Coefficient And Correction Of Quantitative Cerebral Blood Flow, Scott William Thalman

Theses and Dissertations--Biomedical Engineering

The high prevalence and mortality of cerebrovascular disease has led to the development of several methods to measure cerebral blood flow (CBF) in vivo. One of these, arterial spin labeling (ASL), is a quantitative magnetic resonance imaging (MRI) technique with the advantage that it is completely non-invasive. The quantification of CBF using ASL requires correction for a tissue specific parameter called the brain-blood partition coefficient (BBPC). Despite regional and inter-subject variability in BBPC, the current recommended implementation of ASL uses a constant assumed value of 0.9 mL/g for all regions of the brain, all subjects, and even all species.

The …

Biomechanical Effects Of A Hip Orthosis On Lumbo-Pelvic Coordination, Matthew Ballard

Theses and Dissertations--Biomedical Engineering

Abnormal lumbar movement has been observed in individuals who have a history of low back pain (LBP). Affected individuals display a reduction in lumbar spine rotation during trunk movement tasks, while pelvic rotation increases to compensate. Reduced lumbar contribution to forward bending is associated with increased compressive forces and increased shearing demand of the task on the lower back. This abnormal lumbo-pelvic coordination (LPC) can persist beyond LBP symptom alleviation and may contribute to further occurrences or more severe cases of LBP. This study serves as a first step in investigating if abnormal LPC can be corrected with a hip …

Noninvasive Multimodal Diffuse Optical Imaging Of Vulnerable Tissue Hemodynamics, Mingjun Zhao

Theses and Dissertations--Biomedical Engineering

Measurement of tissue hemodynamics provides vital information for the assessment of tissue viability. This thesis reports three noninvasive near-infrared diffuse optical systems for spectroscopic measurements and tomographic imaging of tissue hemodynamics in vulnerable tissues with the goal of disease diagnosis and treatment monitoring. A hybrid near-infrared spectroscopy/diffuse correlation spectroscopy (NIRS/DCS) instrument with a contact fiber-optic probe was developed and utilized for simultaneous and continuous monitoring of blood flow (BF), blood oxygenation, and oxidative metabolism in exercising gastrocnemius. Results measured by the hybrid NIRS/DCS instrument in 37 subjects (mean age: 67 ± 6) indicated that vitamin D supplement plus aerobic training …

Redefining Construction “As-Built” Plans To Meet Current Kentucky Transportation Cabinet Needs, Victoria Lynn Lasley

Theses and Dissertations--Civil Engineering

As-built drawings are the traditional method used by the construction industry to record changes made during construction. As-builts provide valuable information for new design projects as well as rehabilitation and remediation projects. The completeness and accuracy of these plans are essential for transportation industries and their success. While the importance of as-builts is widely recognized, the process of creating them has proven to be difficult. It is a time consuming process and entities often lack the resources necessary to complete accurate and detailed as-builts. After an investigation of current as-built operations within State Transportation Agencies, recommendations have been made to …

Improving Safety Performance Of Highway Maintenance Crews Through Pre-Task Safety Toolbox Talks, Zamaan Al-Shabbani

Theses and Dissertations--Civil Engineering

The dangerous work environment in the construction industry and the inherent high risks associated with construction work make it the focus of safety training and regulations. Highway construction and maintenance has unique hazards but seemingly less directly applicable safety standards, regulations, and programs. Department of Transportation (DOT) employees working in highway maintenance are exposed to a variety of unique hazards specifically associated with their work and not relating to the adjacent traffic. Yet, highway construction and maintenance work has not received sufficient attention in terms of safety research and programs. The lack of safety training and education in highway construction …

An Assessment Of Historical Traffic Forecast Accuracy And Sources Of Forecast Error, Jawad Mahmud Hoque

Theses and Dissertations--Civil Engineering

Transportation infrastructure improvement projects are typically huge and have significant economic and environmental effects. Forecasts of demand of the facility in the form of traffic level help size the project as well as choose between several alternatives. Inaccuracy in these forecasts can thus have a great impact on the efficiency of the operational design and the benefits accrued from the project against the cost. Despite this understanding, evaluation of traffic forecast inaccuracy has been too few, especially for un-tolled roads in the United States. This study, part of a National Cooperative Highway Research Program (NCHRP) funded project, bridges this gap …

Hazard Recognition And Risk Perception Among Union Electricians, Elyas Jazayeri

Theses and Dissertations--Civil Engineering

Hazard recognition and risk perception are two important factors that are a focus of most safety training programs. According to previous research, unrecognized hazards could lead to underestimation of risks, which ultimately could lead to injuries and fatalities. The primary objective of this research was to assess hazard recognition and safety risk perception skills in the electrician trade among electricians in unions. Another goal of this study was to find possible correlation between level of engagement in safety training and hazard recognition and risk perception skills. The research objectives were accomplished by gathering data from sixty-seven apprentices and journeymen across …

Use Of Functionalized Bimetallic Membranes For Treatment Of Contaminated Groundwater At A Hazardous Waste Site In Kentucky, Lucy C. Pacholik

Theses and Dissertations--Civil Engineering

Providing access to clean drinking water will continue to be a challenge for civil engineers for generations to come. Since many communities around the world rely on groundwater as a source of drinking water, remediation technologies must be implemented at sites where groundwater contamination exists due to years of mismanagement of hazardous waste. Using nanosized zero-valent metals such as iron and zinc embedded within and on the surface of functionalized (PAA) membrane filters has shown to be an effective dechlorination technique for contaminated groundwater. Introducing a noble metal such as Pd or Ni increases reaction rates by acting a catalyst …

Connected And Autonomous Vehicles Effects On Emergency Response Times, Austin William Obenauf

Theses and Dissertations--Civil Engineering

Emergency response times have been shown to be directly correlated with mortality rates of out-of-hospital patients. Studies have been conducted to show the relationship between time and mortality rates until patients receive the proper treatment. With more cardiac arrests and other life threatening illnesses occurring in the United States, more emergency calls will be required as well. As of today, technological advancements have been made to reduce response times, but human factors still require certain procedures, causing delays in the run time and increasing the rate of mortality. Here we show the results of emergency response times with the market …

Adapting Crash Modification Factors For The Connected And Autonomous Vehicle Environment, Federico Valentin Lause Iii

Theses and Dissertations--Civil Engineering

The Crash Modification Factor (CMF) clearinghouse can be used to estimate benefits for specific highway safety countermeasures. It assists safety professionals in the allocation of investments. The clearinghouse contains over 7000 entries of which only 446 are categorized as intelligent transportation systems or advanced technology, but none directly address connected or autonomous vehicles (CAVs). Further, the effectiveness of highway safety countermeasures is assumed to remain constant over time, an assumption that is particularly problematic as new technologies are introduced. For example, for the existing fleet of human-driven vehicles, installation of rumble strip can potentially reduce “run-off-road” crashes by 40%. If …

Pathway Connectivity In An Epigenetic Fluviokarst System: Insight From A Numerical Modelling Study In Kentucky Usa, Ethan Adams

Theses and Dissertations--Civil Engineering

Fluviokarst landscapes are dominated by both fluvial and karst features. Interpreting hydrologic pathways of fluviokarst can be confounded by the unknown connectivity of the various flow regimes. A combined discrete-continuum (CDC) hybrid numeric model for simulating the surface and subsurface hydrology and hydraulics in fluviokarst basins was formulated to investigate fluviokarst pathways. This model was applied to the Cane Run Royal Springs basin in Kentucky USA. A priori constraints on parameterization were avoided via multi-stage optimization utilizing Sobol sequencing and high performance computing. Modelling results provide evidence of hydrologic pathways dominated by fracture flow, epikarst transfer and runoff. Fractures in …

Decomposing A Watershed’S Nitrate Signal Using Spatial Sampling And Continuous Sensor Data, Evan Clare

Theses and Dissertations--Civil Engineering

Watershed features, physiographic setting, geology, climate, and hydrologic processes combine to produce a time-variant nutrient concentration signal at the watershed outlet. Anthropogenic influences, such as increased agricultural pressures and urbanization, have increased overall nutrient loadings delivered to the fluvial network. The impact of such increased nutrient loadings on Kentucky’s drinking water remains a potential threat to the region.

By coupling spatial sampling of nitrate concentrations in surface water with contemporary nutrient and water quality sensor technology, a decomposition of the Upper South Elkhorn watershed’s nitrate signal and an estimation of source timing and loading in the watershed was completed. The …

Improving Bicycle Infrastructure With The Use Of Bicycle Share Travel Data, Jennifer Mintao Weast

Theses and Dissertations--Civil Engineering

Bicycling as a mode of transportation has been increasing in recent years due to its environmental and health benefits. The availability of bicycles through bicycle share programs has made bicycling a more viable option. With this increase, there is a need for complementary improvements of bicycle infrastructure. Many local and regional transportation agencies are recognizing this need and developing a master plan or safety action plan to improve the city’s bicycle and walking facilities. This study examines bicycle travel demands and travel patterns in Lexington, Kentucky as generated by SPIN bicycle share users. It is hypothesized that the SPIN users …

Biological Selenium Control: Selenium Reduction By Shigella Fergusonii Strain Tb42616 And Pantoea Vagans Strain Ewb32213-2 In Bioreactor Systems, Yuxia Ji

Theses and Dissertations--Civil Engineering

Se(VI) and Se(IV), as the two major species of selenium in water, are toxic to aquatic lives and may cause adverse health effects to humans at high levels. Biological reduction of Se(VI) is a two-stage process first from Se(VI) to Se(IV) and then from Se(IV) to Se(0) with potential accumulation of the more toxic Se(IV) due to the slower rate of the second stage.

Selenium reduction was first evaluated with batch cultures of Shigella fergusonii strain TB42616 (TB) and Pantoea vagans strain EWB32213-2 (EWB) isolated in our laboratory from sludge and coal slurry sediment samples, respectively. In order to facilitate …

Characterization Of Nanostructure, Materials, And Electron Emission Performance Of Next-Generation Thermionic Scandate Cathodes, Xiaotao Liu

Theses and Dissertations--Chemical and Materials Engineering

Scandate cathodes, where scandia is added to the tungsten cathode pellets, have recently received substantial and renewed research interest owing to significantly improved electron emission capabilities at lower temperatures, as compared with conventional dispenser cathodes. However, there are several persistent issues including non-uniform electron emission, lack of understanding regarding scandium’s role in the emission mechanism, and unreliable reproducibility in terms of scandate cathode fabrication. As a result, scandate cathodes have not yet been widely implemented in actual vacuum electron devices (VEDs).

The surface structure and chemical composition of multiple scandate cathodes – prepared with the powder using the liquid-solid (L-S) …

Investigation Of Transition-Metal Ions In The Nickel-Rich Layered Positive Electrode Materials For Lithium-Ion Batteries, Shuang Gao

Theses and Dissertations--Chemical and Materials Engineering

Layered lithium transition-metal oxides (LMOs) are used as the positive electrode material in rechargeable lithium-ion batteries. Because transition metals undergo redox reactions when lithium ions intercalate in and disintercalate from the lattice, the selection and composition of transition metals largely influence the electrochemical performance of LMOs. Recently, a Ni-rich compound, LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811), has drawn much attention. It is expected to replace its state-of-the-art cousins, LiCoO₂ (LCO) and LiNi_1/3Co_1/3Mn_1/3O₂ (NCM111), because of its higher capacity, lower cost, and reduced toxicity. However, the excess Ni, as a …

Synthesis, Design, And Evaluation Of The Fluorescent Detection Of Polychlorinated Biphenyls(Pcbs) In Aqueous System, Irfan Ahmad

Theses and Dissertations--Chemical and Materials Engineering

The exposure to halogenated persistent organic pollutants (POPs), such as polychlorinated biphenyls (PCBs), has been linked to numerous inflammatory diseases, including diabetes, cancer and lowered immune response. PCBs have low solubility in water, and they interact with other contaminants, making their detection quite challenging. While, there have been several attempts at improving the ease of detection and sensing of PCBs, gas chromatography-mass spectrometry (GC-MS) remains the gold standard. However, despite its ubiquitous use, GC-MS is a challenging technique that requires high skill and careful sample preparation, which are time-consuming and costly. As such, there is still a need to develop …

Understanding The Structure-Property-Performance Relationship Of Silicon Negative Electrodes, Jiazhi Hu

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable lithium ion batteries (LIBs) have long been used to power not only portable devices, e.g., mobile phones and laptops, but also large scale systems, e.g., electrical grid and electric vehicles. To meet the ever increasing demand for renewable energy storage, tremendous efforts have been devoted to improving the energy/power density of LIBs. Known for its high theoretical capacity (4200 mAh/g), silicon has been considered as one of the most promising negative electrode materials for high-energy-density LIBs. However, diffusion-induced stresses can cause fracture and, consequently, rapid degradation in the electrochemical performance of Si-based negative electrodes. To mitigate the detrimental effects …

Effects Of Depositional Processes On Strength And Compressibility Of Sediments Using Elastic Shear Wave Velocity, Wisam Razzaq Muttashar

Theses and Dissertations--Earth and Environmental Sciences

Depositional processes are the most critical, complicated conditions that govern sediment properties and their variations, which in turn significantly affect the geotechnical behavior of the sediment. The complexity of depositional and post-depositional processes, which results in a variety of depositional environments, makes constructing a plausible model for the consolidation process of sediments difficult. The mutual influence between the temporal and spatial variation of depositional environments with their resultant physical and mechanical properties cause several compression issues, such as consolidation settlement and land subsidence, which mostly occur in estuarine-riverine regions throughout the world.

The first aim of this study is proposing …

Investigating The Feasibility Of Using Mesoporous Silica Particles To Deliver Glucose During Anaerobic Fermentation, Megan E. Walz

Theses and Dissertations--Biosystems and Agricultural Engineering

The study presented herein investigated a potential low-energy method to separate and concentrate glucose from a lignocellulosic hydrolysate. The motivation for this method was twofold: 1) to provide the fermentation microorganism an optimal glucose concentration and 2) to supply a fermentation media free of inhibitory compounds. Two sizes of porous silica particles (with 7 nm and 2.3 nm pores) were synthesized and their ability to adsorb glucose from solution confirmed. Next, the ability of two different microorganisms, Saccharomyces cerevisiae and Streptococcus bovis, to utilize sugars adsorbed to the porous silica particles was investigated.

Both the 7 nm and 2.3 …