Engineering Commons^™

Representativeness Evaluation Of Delta-Flux Eddy Covariance Towers For Assessing Greenhouse Gas Emissions From Rice Fields In The Mid-South Region, Katherine Skiles

Biological and Agricultural Engineering Undergraduate Honors Theses

Rice grown in 5 states across the Mid-South (AR, LA, MS, TX, and MO) account for nearly 80% of all domestic U.S. rice production. Methane emissions produced during rice farming and the large seasonal water demand to maintain flooded fields have created a need for alternative irrigation research that can reduce methane emissions and conserve water. Structures called eddy covariance towers (ECTs) can observe methane and other flux responses to changing irrigation styles, and their data is shared across flux tower networks such as Delta-Flux in the Mid-South. The Delta-Flux network is relatively new, and its data-sharing capacity is not …

Examining The Benefits Of Using Rainfall To Supplement Alternate Wetting And Drying Irrigation In Zero-Grade Rice Fields In Central Arkansas, Leo Black

Biological and Agricultural Engineering Undergraduate Honors Theses

Arkansas farmers account for more than 50% of United States production of rice, a crop that requires 3 to 5 times as much water as other regional crops. Methods of reducing water use and increasing its efficiency are being explored throughout the rice production industry, including irrigation management, better land grading, and precipitation capture. This project investigates the combination of these methods. The objectives of this project were to assess field-level water inputs, identify relationships between rice growth and water input, and analyze weather patterns in zero-grade fields in central Arkansas. Subsequent results were used to determine if there is …

Growth Of Germanium Thin Films On Sapphire Using Molecular Beam Epitaxy, Emmanuel Wangila, Peter Lytvyn, Hryhorii Stanchu, Calbi Gunder, Fernando Maia De Oliveira, Samir Saha, Subhashis Das, Niroshi Eldose, Chen Li, Mohammad Zamani-Alavijeh, Mourad Benamara, Yuriy I. Mazur, Shui-Qing Yu, Gregory J. Salamo

Electrical Engineering Faculty Publications and Presentations

Germanium films were grown on c-plane sapphire with a 10 nm AlAs buffer layer using molecular beam epitaxy. The effects of Ge film thickness on the surface morphology and crystal structure were investigated using ex situ characterization techniques. The nucleation of Ge proceeds by forming (111) oriented three-dimensional islands with two rotational twin domains about the growth axis. The boundaries between the twin grains are the origin of the 0.2% strain and tilt grains. The transition to a single-grain orientation reduces the strain and results in a better-quality Ge buffer. Understanding the role of thickness on material quality during the …

Flexible And Sewable Electrode Based On Ni-Co@Pani-Salphen Composite-Coated On Textiles For Wearable Supercapacitor, Touba Rezaee Adriyani, Ali A. Ensafi, B. Rezaei

Chemistry & Biochemistry Faculty Publications and Presentations

Flexible electrodes with high deformability and energy density are critical for electronic textiles. The key factor for achieving high-performance supercapacitors with superior power and energy density is the evaluation of materials that exhibit exceptional capacitive performance. Herein, we have prepared Ni-Co nanoparticles at the surface of polyaniline-salphen (Ni-Co@PS). Then, followed by casting Ni-Co@PS on a conductive carbon cloth (CC) as a substrate through a facile in-situ polymerization strategy. The morphologies of Ni-Co@PS composite were characterized by different methods such as FE-SEM, XPS, XRD, BET, and electrochemical methods. This nanocomposite showed high tolerability and a large surface area with excellent behavior …

Innovative Approaches To Poultry Processing Wastewater Treatment: The Stainless Steel Ultrafiltration Membrane As A Viable Option, Saubana Olorunrola Dada, Chidambaram Thamariselvan, Mahmood Jebur, Sumith Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

In pursuit of sustainability, we explored replacing conventional dissolved air floatation (DAF) in poultry processing wastewater (PPW) treatment with a precisely tuned 0.02 µm stainless-steel ultrafiltration (SSUF) membrane. SSUF is a robust, homogenously porous membrane with strong chemical resistance, ease of cleaning, and exceptional resistance to organic fouling. Unlike polymeric membranes, it can be regenerated multiple times, making it a cost-effective choice due to its compatibility with harsh chemical cleaning. The PPW used for the study was untreated wastewater from all processing units and post-initial screening. Our study revealed the SSUF membrane’s exceptional efficiency at eliminating contaminants. It achieved an …

Autofluorescence Imaging Of Endogenous Metabolic Cofactors In Response To Cytokine Stimulation Of Classically Activated Macrophages, Shelby N. Bess, Matthew J. Igoe, Abby C. Denison, Timothy J. Muldoon

Biomedical Engineering Faculty Publications and Presentations

Background

Macrophages are one of the most prevalent subsets of immune cells within the tumor microenvironment and perform a range of functions depending on the cytokines and chemokines released by surrounding cells and tissues. Recent research has revealed that macrophages can exhibit a spectrum of phenotypes, making them highly plastic due to their ability to alter their physiology in response to environmental cues. Recent advances in examining heterogeneous macrophage populations include optical metabolic imaging, such as fluorescence lifetime imaging (FLIM), and multiphoton microscopy. However, the method of detection for these systems is reliant upon the coenzymes NAD(P)H and FAD, which …

An Amplification-Free Crispr-Sers Biosensor For Specific, Sensitive And Rapid Detection Of Salmonella Typhimurium In Poultry, Fei Jia, Bingyan Li, Yawen He, Yafang Shen, Juhong Chen, Xingmin Li, Yanbin Li

Biological and Agricultural Engineering Faculty Publications and Presentations

CRISPR (Clustered regularly interspaced short palindromic repeats) has been a cutting-edge biotechnology in both gene editing and biosensing due to its desirable features, such as high base resolution and set-and-forget operation. However, as a nucleic acid detection method, an DNA/RNA amplification procedure is still inevitable in CRISPR biosensors. In this study, a highly-ordered nanopore array SERS substrate, coated with silver nanoparticles, was fabricated and utilized as a platform for the specific detection of Salmonella Typhimurium (S. Typhimurium) without the time-consuming DNA amplification step. The smart sensing strategy was established by introducing an ssDNA labeled with a Raman active molecule …

A Phenomenological Model For Creep And Creep-Fatigue Crack Growth Rate Behavior In Ferritic Steels, Ashok Saxena

Mechanical Engineering Faculty Publications and Presentations

A model to rationalize the effects of test temperature and microstructural variables on the creep crack growth (CCG) and creep-fatigue crack growth (CFCG) rates in ferritic steels is described. The model predicts that as the average spacing between grain boundary particles that initiate creep cavities decrease, the CCG and CFCG rates increase. Further, the CCG data at several temperatures collapse into a single trend when a temperature compensated CCG rate derived from the model is used. The CCG and CFCG behavior measured at different temperatures is used to assess the effects of variables such as the differences between the base …

Study Of All-Group-Iv Sigesn Mid-Ir Lasers With Dual Wavelength Emission, Grey Abernathy, Solomon Ojo, Abdulla Said, Joshua M. Grant, Yiyin Zhou, Hryhorii Stanchu, Wei Du, Baohua Li, Shui-Qing Yu

Electrical Engineering Faculty Publications and Presentations

Direct band gap GeSn alloys have recently emerged as promising lasing source materials for monolithic integration on Si substrate. In this work, optically pumped mid-infrared GeSn lasers were studied with the observation of dual-wavelength lasing at 2187 nm and 2460 nm. Two simultaneous lasing regions include a GeSn buffer layer (bulk) and a SiGeSn/GeSn multiple quantum well structure that were grown seamlessly using a chemical vapor deposition reactor. The onset of dual lasing occurs at 420 kW/cm². The wider bandgap SiGeSn partitioning barrier enables the independent operation of two gain regions. While the better performance device in terms …

Influence Of Metal-Coordinating Comonomers On The Coordination Structure And Binding In Magnetic Poly(Ionic Liquid)S, Kayla Foley, Lucas Condes, Keisha B. Walters

Chemical Engineering Faculty Publications and Presentations

A poly(ionic liquid) (PIL), poly(acrylamide-co-diallyl dimethylammonium chloride), was systematically complexed with Co²⁺, Fe³⁺, and Co²⁺/Fe³⁺ (mixed) at different molar equivalencies to form a series of magnetic PILs (MPILs). These novel MPILs were utilized to examine molecular structure and binding between the polymer and metal species using comprehensive spectroscopic studies in both dry and liquid states. FTIR, X-ray photoelectron, UV-vis, and Raman spectroscopies showed evidence of metal coordination of both the iron and cobalt chloride species with the acrylamide comonomer. Using AC susceptibility measurements, the MPILs were found to have magnetic properties …

A Review Of Three-Dimensional Vision Techniques In Food And Agriculture Applications, Lirong Xiang, Dongyi Wang

Biological and Agricultural Engineering Faculty Publications and Presentations

In recent years, three-dimensional (3D) machine vision techniques have been widely employed in agriculture and food systems, leveraging advanced deep learning technologies. However, with the rapid development of three-dimensional (3D) imaging techniques, the lack of a systematic review has hindered our ability to identify the most suitable imaging systems for specific agricultural and food applications. In this review, a variety of 3D imaging techniques are introduced, with their working principles and applications in agriculture and food systems. These techniques include Structure lighting-based 3D imaging, Multiview 3D imaging system, Time of Flight (ToF)-based 3D imaging system, Lighting Detection and Ranging (LiDAR), …

Solution And Film Self-Assembly Behavior Of A Block Copolymer Composed Of A Poly(Ionic Liquid) And A Stimuli-Responsive Weak Polyelectrolyte, Kayla Foley, Keisha B. Walters

Chemical Engineering Faculty Publications and Presentations

Cu(0)-mediated atom transfer radical polymerization was used to synthesize a poly(ionic liquid), poly[4-vinylbenzyl-3-butylimidazolium bis(trifluoromethylsulfonyl)imide] (PVBBImTf₂N), a stimuli-responsive polyelectrolyte, poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA), and a novel block copolymer formed from these two polymers. The synthesis of the block copolymer, poly[2-(dimethylamino) ethyl methacrylate]-block-[poly(4-vinylbenzyl-3-butylimidazolium bis(trifluoromethylsulfonyl)imide] (PDMAEMA-b-PVBBImTf₂N), was examined to evaluate the control of “livingness” polymerization, as indicated by molecular weight, characterizations of degree of polymerization, and ¹HNMR spectroscopy. 2D DOSY NMR measurements revealed the successful formation of block copolymer and the connection between the two polymer blocks. PDMAEMA-b-PVBBImTf₂N was further characterized …

Guar-Based Injectable Hydrogel For Drug Delivery And In Vitro Bone Cell Growth, Humandra Poudel, Ambar R. Rangumagar, Pooja Singh, Adeolu Oluremi, Nawab Ali, Fumiya Watanabe, Joseph Batta-Mpouma, Jin-Woo Kim, Ahona Ghosh, Anindya Ghosh

Chemistry & Biochemistry Faculty Publications and Presentations

Injectable hydrogels offer numerous advantages in various areas, which include tissue engineering and drug delivery because of their unique properties such as tunability, excellent carrier properties, and biocompatibility. These hydrogels can be administered with minimal invasiveness. In this study, we synthesized an injectable hydrogel by rehydrating lyophilized mixtures of guar adamantane (Guar-ADI) and poly-β-cyclodextrin (p-βCD) in a solution of phosphate-buffered saline (PBS) maintained at pH 7.4. The hydrogel was formed via host-guest interaction between modified guar (Guar-ADI), obtained by reacting guar gum with 1-adamantyl isocyanate (ADI) and p-βCD. Comprehensive characterization of all synthesized materials, including the hydrogel, was performed using …

A Review Of Nano And Microscale Heat Transfer: An Experimental And Molecular Dynamics Perspective, Samyabrata Chatterjee, Paras, Han Hu, Monojit Chakraborty

Mechanical Engineering Faculty Publications and Presentations

Significant progress in the development of micro and nanoscale devices has been observed for the past three decades. The thermal transportation in these small-length scales varies significantly, and it is difficult to explain the underlying physics using the pre-existing theoretical formulations. When the bulk dimension of a system is comparable to or smaller than the mean free path (MFP) of the thermal carriers, classical theories, such as Fourier’s Law of heat conduction, are unable to accurately explain the system energy dynamics. The phenomena of energy transit and conversion at the micro to nanoscale is an interesting topic of research due …

Pine-Tree Enables Efficient Enrichment Of Prime-Edited Hpscs, Mary S. Jia, Christopher E. Nelson

Biomedical Engineering Faculty Publications and Presentations

Commentary

PINE-TREE enables efficient enrichment of prime-edited hPSCs

Degredation Of Organic Pollutants In Flocculated Liquid Digestate Using Photocatalytic Titanate Nanofibers: Mechanism And Response Surface Optimization, Yiting Xiao, Yang Tian, Yuanhang Zhan, Jun Zhu

Biological and Agricultural Engineering Faculty Publications and Presentations

Titanate nanofibers (TNFs) were synthesized using a hydrothermal method and were employed for the first time in this study to photocatalytically degrade organic pollutants found in flocculated liquid digestate of poultry litter. The photocatalytic performance of TNFs, with a bandgap of 3.16 eV, was tested based on degradation of organic pollutants and removal of color. Five combinations of pollutant concentration and pH were examined (0.2 to 1.3 g·L⁻¹ at pH 4 to 10). Central composite design (CCD) and response surface methodology (RSM) were applied in order to optimize the removal rates of volatile fatty acids (VFA) and chemical oxygen …

Alkaline Pretreatment And Air Mixing For Improvement Of Methane Production From Anaerobic Co-Digestion Of Poultry Litter With Wheat Straw, Yuanhang Zhan, Jun Zhu, Yiting Xiao, Leland C. Schrader

Biological and Agricultural Engineering Faculty Publications and Presentations

Alkaline pretreatment (AL) and air mixing (air) both have the potential to improve anaerobic co-digestion (Co-AD) of poultry litter with wheat straw for methane production. In this study, the effects of the combination of AL (pH 12 for 12 h) and air mixing (12 mL·d⁻¹) on the Co-AD process were investigated. The substrate hydrolysis was enhanced by AL, with soluble chemical oxygen demand increased by 4.59 times and volatile fatty acids increased by 5.04 times. The cumulative methane yield in the group of Co-AD by AL integrated with air (Co-(AL + air)), being 287 mL·(g VS_added) …

Smart Cities-A Structured Literature Review, Jose Sanchez Gracias, Gregory S. Parnell, Eric Specking, Edward A. Pohl, Randy Buchanan

Industrial Engineering Faculty Publications and Presentations

Smart cities are rapidly evolving concept-transforming urban developments in the 21st century. Smart cities use advanced technologies and data analytics to improve the quality of life for their citizens, increase the efficiency of infrastructure and services, and promote sustainable economic growth. Smart cities integrate multiple domains, including transportation, energy, health, education, and governance, to create an interconnected and intelligent urban environment. Our research study methodology was a structured literature review using Web of Science and Google Scholar and ten smart city research questions. The research questions included smart city definitions, advantages, disadvantages, implementation challenges, funding, types of applications, quantitative techniques …

Health-Care And Supportive Services In General Population Disaster Shelters, Ashlea Bennett Milburn, Charleen C. Mcneill, Lauren Clay, Janice Springer, Mary Casey-Lockyer

Industrial Engineering Faculty Publications and Presentations

Objectives:

The Communication (C), Maintaining Health (M), Independence (I), Services, Support and Self-Determination (S), and Transportation (T) is a framework (C-MIST) for identifying functional needs in an emergency response. A C-MIST documentation tool provides shelter staff with a list of potential client needs and actions to address them. This retrospective review describes the needs and actions indicated on completed C-MIST documentation tools (ie, records) within domestic general population shelters following Hurricane Florence in 2018.

Methods:

A convenience sample of 1209 records completed by shelter disaster health services personnel was provided by the American Red Cross. The records correspond to client …

Verification Of Astm Centrifugation Equations For Soil Suction Determination, Esteban Maclein Miranda Pinzon

Graduate Theses and Dissertations

The unit correction constant (B) in the ASTM D6836 standard needs to be evaluated. The B-value was proposed to be 0.00548 instead of 0.00553. This apparent discrepancy led to an investigation comparing the predicted and measured suction values for high air entry (HAE) ceramic disks. A Beckman-Coulter Model J6-MI six-bay centrifuge and a WP4C Dewpoint Potentiameter were used in the testing program. HAE ceramic disks rated with bubbling pressures of 3-bar and 5-bar were used as analogue soil specimens. The HAE ceramic disks were spun in the small-scale centrifuge to apply prescribed suction amounts and then placed in the WP4C …

Alkali Silica Reaction Mitigation Using Glycerin, Ana Laura Errigo Chanis

Graduate Theses and Dissertations

The use of glycerin as a concrete additive to reduce alkali silica reaction (ASR), was evaluated and is presented in this study. Specifically, the United States Army Corps of Engineers (USACE) ultra-accelerated alkali silica reaction testing procedure by means of autoclaving was employed to examine the use of glycerin for ASR mitigation or reduction by analyzing mortar bar expansion data. The fine aggregates used in this investigation consisted of highly reactive Jobe Sand or Los Lunas Sand with an autoclave expansion of 0.5 and 0.4 percent, respectively. The laboratory investigation was performed by recording the amount of expansion of the …

Wind Tunnel Modeling Of The Jack Rabbit Ii Mock Urban Environment Chlorine Releases Based On Comparison With Field Scale Video Record, Samuel Gallimore

Graduate Theses and Dissertations

Unintentional releases of hazardous gases have led to significant injuries and fatalities in severe cases. Field tests can be used to release hazardous gases to document and evaluate the behavior of the gases. Chlorine is an especially hazardous gas due to its toxicity. The Jack Rabbit II Phase I field tests released chlorine within a mock urban environment (MUE) consisting of Conex containers arranged in rows to simulate buildings and streets. The number of field tests is limited by both expense and time. Simulation of a field test using a wind tunnel model can provide additional data and opportunity for …

Investigation Of The Flow Field In The Jack Rabbit Ii Mock Urban Environment Field Tests Using A 1:50 Scale Wind Tunnel Model, Paulo Victor De Freitas Lopes

Graduate Theses and Dissertations

Accidental release of toxic chemicals can put workers and nearby populations at significant risk. Consequence assessment of accidents in urban environments is of particular interest. Urban geometries create wind channels between buildings, along with particularly dangerous areas downwind of buildings, where near-stagnant flow is present. Furthermore, recirculation zones can be formed between buildings, trapping high concentrations of toxic gases at ground level, particularly for denser-than-air gases. In 2015, the Department of Homeland Security conducted the Jack Rabbit II Field Test (JR-II) at Dugway Proving Ground, UT. During JR-II, chlorine was released at the center of a Mock Urban Environment (MUE) …

Understanding Peripheral Blood Pressure Signals: A Statistical Learning Approach, Md Abul Hayat

Graduate Theses and Dissertations

Proper estimation of body fluid status for human or animal subjects has always been a challenging problem. Accurate and timely estimate of body fluid can prevent life threatening conditions under trauma and severe dehydration. The main objective of this research is the estimation, classification and detection of dehydration in human and animal subjects using peripheral blood pressure (PBP) signals. Peripheral venous pressure (PVP) and peripheral arterial pressure (PAP) signals have been investigated in this research. Both PVP and PAP signals are PBP signals. A dataset of PVP signals was collected using standard peripheral intravenous catheters from human subjects suffering from …

Non-Energy Circular Economy Potential Of Rice Husks: A Techno-Eco-Environmental Assessment, Winfred Oppong Yeboah

Graduate Theses and Dissertations

The non-energy circular bioeconomy potential of rice husks was examined via sustainability assessments, namely life cycle assessment (LCA), life cycle impact cost assessment (LCICA), and techno-economic assessment (TEA). The study was conducted with three objectives. The first objective was to review previous studies on the non-energy utilization potential of rice husks by the method of meta-analysis. This review followed a systematic approach where research papers were collected following a defined set of criteria. The study revealed 16 key utilization pathways, all of which showed promising results. However, a comprehensive sustainability assessment was lacking in all of the pathways. The second …

Treating High Salinity Produced Water Using Hybrid Membrane Processes: Electrocoagulation-Microfiltration/Ultrafiltration-Membrane Distillation-Crystallization, Mahmood Gheni Jebur

Graduate Theses and Dissertations

Produced water (PW) is considered the largest industrial wastewater stream in the world. PW generated from oil and gas operations generally contains a range of contaminants including high total dissolved solids, high total suspended solids, polar and nonpolar organic compounds, and low surface tension dissolved species. Treating PW is very challenging and applying only membrane-based technologies is not sufficient due to membrane fouling, which affects their long-term performance. Hence, integrated membrane processes are required to treat PW effectively. Hybrid membrane processes, which may result from combining a conventional process with a membrane separation, could be used to address the issues …

Injectable Immunomodulatory Strategies To Enhance Muscle Recovery Following Injury, Tai Huu Huynh

Graduate Theses and Dissertations

Although skeletal muscle displays an astonishing regenerative capacity, injuries or diseases that resulted in bedridden or chronic muscle wasting can overwhelm this intrinsic feature of skeletal muscle and lead to functional deficit (range of motion and/or strength) and overall reduction in quality of life. Microenvironmental cues within injured skeletal muscle dictate regenerative and repair process which are tightly coordinated interplay among resident cells, cells recruitment and immune response following an assault in the muscle extracellular matrix (ECM). The successful regeneration of functional tissues requires both appropriate modulation of the inflammatory response, and activation of a variety of cell populations. Biomaterials …

Characterizing Logistics Operations Within A Federal Staging Area For Hurricane Response: A Qualitative Analysis Of Federal, State And Local Perspectives, Jannatul Shefa

Graduate Theses and Dissertations

A successful deployment of logistics operations following a disaster is a collective contribution of federal, state, and local entities to ascertain an efficient and effective response. This research analyzes data from interviews with disaster response logistics experts from these entities. The objective is to investigate the information sources and planning processes used in these organizations to plan vehicle routes for critical resource deliveries to impacted areas. Special attention is directed to the impacts of incomplete knowledge of infrastructure status, such as road disruptions due to debris or flooding. Supported by both qualitative and quantitative evidence, the study finds that incomplete …

Next-Generation Nanopore Sensors Based On Conductive Pulse Sensing For Enhanced Detection Of Nanoparticles, Samuel Confederat, Seungheon Lee, Derr Vang, Dimitrios Soulias, Fabio Marcuccio, Timotheus I. Peace, Martin Andrew Edwards, Pietro Strobbia, Devleena Samanta, Christoph Wälti, Paolo Actis

Chemistry & Biochemistry Faculty Publications and Presentations

Nanopore sensing has been successfully used to characterize biological molecules with single-molecule resolution based on the resistive pulse sensing approach. However, its use in nanoparticle characterization has been constrained by the need to tailor the nanopore aperture size to the size of the analyte, precluding the analysis of heterogeneous samples. Additionally, nanopore sensors often require the use of high salt concentrations to improve the signal-to-noise ratio, which further limits their ability to study a wide range of nanoparticles that are unstable at high ionic strength. Here, a new paradigm in nanopore research that takes advantage of a polymer electrolyte system …

Dataset Of Single And Double Faults Scenarios Using Vibration Signals From A Rotary Machine, Larry Marshall, David Jensen

Mechanical Engineering Faculty Publications and Presentations

This dataset includes vibration sensor data from accelerometers located on the support bearings on a rotary machine designed as a fault simulator. Data collection for known faulty components include: bearing inner and outer raceway faults and bent shaft. 38 singles and double fault scenarios and a one no fault scenario were collected at three different operating frequencies (shaft rpm). Data was collected for approximately 10 seconds per scenario at a rate of 6400 hertz. Data can be used for machine learning classification.