Engineering Commons^™

Effect Of Incubation Temperature On Phosphorous Release From Soils To Water, Seth Boles

Biological and Agricultural Engineering Undergraduate Honors Theses

In recent years, nutrient release into flood waters and runoff has been a major concern within the Illinois River watershed, as well as nationwide. This study investigated whether there was a change in the release rate of soluble reactive phosphorous (SRP) into overlying water from soil cores incubated at different temperatures. Soil cores were incubated at 4.4°C, 20°C, and 32°C. After inundation, water samples were taken periodically over a seven-hour period and SRP measured. Following the drainage of the water, the upper 5 cm soil from each core was dried and analyzed for Mehlich III-extractable and water-extractable P. The results …

Nutrient Limitation Of Algal Growth In Fishery Lakes, Madeline Ludwig

Biological and Agricultural Engineering Undergraduate Honors Theses

This study investigated the effect of nutrient addition on algal growth in three United States Forest Service lakes for fishery management in Arkansas. In fishery managed lakes, fertilization works by manipulating algae growth, a basal food resource in lakes, to promote the growth of the fish population. For the nutrient addition experiments, water was collected from each lake in cubitainers and spiked with nutrients; the treatments included the control, nitrogen (+N), phosphorus (+P), and nitrogen and phosphorus (+N +P). When algal growth was visually observed, a water sample was collected from each cubitainer and analyzed for chlorophyll-α. The results showed …

Investigating Initial Interactions Between Silver Nanoparticles And Wastewater, Casey Gibson

Biological and Agricultural Engineering Undergraduate Honors Theses

The use of nanoparticles (NPs) has increased exponentially in the last 15-20 years, especially in the consumer market. NPs are currently found in over 1800 commercial products, including cosmetics, clothing, packaging, and toys. As a result, NPs can enter the environment via wastewater (WW) streams, leading to new challenges in WW treatment. This study focuses on the initial fate of silver nanoparticles (AgNPs) in WW. The AgNP interaction including aggregation and dissolution in both synthetic and real WW were studied. Real WW was collected from the primary-clarifier, secondary-clarifier, and effluent WW streams at two local WW treatment plants (Westside and …

Optimizing Genetic Manipulation Of Methanogens Through Faster Cloning Techniques, Merrisa Jennings

Biological and Agricultural Engineering Undergraduate Honors Theses

Methanogenesis is the biological production of methane. Only anaerobic archaea known as methanogens are capable of such a metabolic feat. They have strict living conditions and substrate sources which determine their rate of metabolism. This is of particular importance from a greenhouse gas reduction perspective or biogas capturing perspective. One of the best ways to optimize methanogen methane production is via genetic manipulation. The current procedures are timely though, therefore a faster cloning processes should be developed. The objective of this study was to optimize a premade genetic transformation kit known as the Gibson Kit. The Gibson Kit was supposed …

Chloride Salt Inhibition On Lipid Production In Wastewater-Grown Algae For Biofuel Production, Will Richardson

Biological and Agricultural Engineering Undergraduate Honors Theses

Algae are increasingly being recognized as useful organisms for many applications in today’s world. Their ability to remove nitrogen, phosphorus, and trace metals from water while adding oxygen to water makes them an attractive tertiary treatment technology in municipal wastewater treatment facilities. At the same time, algae produce lipids and carbohydrates that are useful for biofuel production, and they are not a human food crop unlike many biofuel feedstocks. In this study the effect of increased chloride concentrations in wastewater was assessed on the ability of two species of algae, Chlorella vulgaris and Scenedesmus dimorphus, to function as a …

Assessing Auto-Flocculation Of Microalgae In Wastewater Treatment, Alexander Parr

Biological and Agricultural Engineering Undergraduate Honors Theses

Biofuels produced from algae have the prospect to provide a cheap, carbon neutral alternative to fossil fuels. However, the high cost for harvesting algae limits its wide application, as the preferred algae strains for biofuel production are typically unicellular microalgae that do not settle in water very well. Recently, researchers have been focusing on developing a biological method to achieve the sedimentation of algae through flocculation. A recent study has concluded that introducing microalgae that self-flocculates increases the recovery of the desired microalgae, similar to the effect of using coagulant to flocculate the algae. This option can potentially be more …

In-Cage Surface Wetting System For Cooling Poultry In Transport, Ryan Clark

Biological and Agricultural Engineering Undergraduate Honors Theses

Abstract

Poultry health and mortality rates are important considerations in poultry production, as companies can minimize product loss and appeal to a consumer base whose concern for animal welfare continues to grow. Although animal welfare is a consideration for the entire poultry production process, this project focuses on the live-haul phase of the process, specifically during transport from grow houses to processing facilities. During the summer months, broiler chickens being transported can suffer from heat stress that can lead to death. This project consists of the designing and testing of an in-cage surface wetting system to minimize heat stress incidents …

Improving The Truck Driver Job, Kerry Melton

Operations Management Presentations

Freight transportation has increased dramatically over the last 35 years as freight and shipment demand have expanded resulting in truck driver and equipment capacity issues and infrastructure problems. Freight transport tonnage in the U.S. is predominately truck transportation consisting of more than 70% of all freight distribution with a 25% growth expectation over the next 5 years. Within the trucking industry, over-the-road (OTR) truckload transportation consists of 50% of all truck tonnage shipped. Due to high OTR truckload demand, OTR driver capacity issues have plagued the truckload industry for years. Additionally, high OTR driver turnover and poor driver job retention …

Modeling Of Cloud-Based Digital Twins For Smart Manufacturing With Mt Connect, Liwen Hu, Ngoc-Tu Nguyen, Wenjin Tao, Ming C. Leu, Xiaoqing Frank Liu, Md Rakib Shahriar, S M Nahian Al Sunny

Computer Science and Computer Engineering Faculty Publications and Presentations

The common modeling of digital twins uses an information model to describe the physical machines. The integration of digital twins into productive cyber-physical cloud manufacturing (CPCM) systems imposes strong demands such as reducing overhead and saving resources. In this paper, we develop and investigate a new method for building cloud-based digital twins (CBDT), which can be adapted to the CPCM platform. Our method helps reduce computing resources in the information processing center for efficient interactions between human users and physical machines. We introduce a knowledge resource center (KRC) built on a cloud server for information intensive applications. An information model …

Academy Presidents And Institutional Members, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Travel To Extraterrestrial Bodies Over Time: Some Exploratory Analyses Of Mission Data, Venkat Kodali, Rohith Kumar Reddy Duggirala, Richard S. Segall, Hyacinthe Aboudja, Daniel Berleant

Journal of the Arkansas Academy of Science

This paper discusses data pertaining to space missions to astronomical bodies beyond earth. The analyses provide summarizing facts and graphs obtained by mining data about (1) missions launched by all countries that go to the moon and planets, and (2) Earth satellites obtained from a Union of Concerned Scientists (UCS) dataset and lists of publically available satellite data.

Business Meeting Report (Secretary's And Treasurer's Report), Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Journal Acknowledgments And Editorial Board, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Instructions To Authors For The Journal Of The Arkansas Academy Of Science, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Table Of Contents, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Journal Of The Arkansas Academy Of Science- Volume 72 2018, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Keynote Address And Meeting Program Report, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Onsager Reciprocal Relations: Microscopic (Onsager) Or Macroscopic (Sliepcevich), R. E. "Buddy" Babcock

Chemical Engineering Faculty Publications and Presentations

This paper is a combination of the discussion of two nineteenth century theoretical giants Lars Onsager and C. M. Sliepcevich, their works in general, and specifically the famous reciprocal relations of Onsager with respect to irreversible thermodynamics. Emphasis is placed on their penetrating depth and breadth of analysis so inherently necessary in their problem-solving endeavors. The landscape of their work will be laid out for the reader by a comparison of Onsager’s microscopic statistical mechanics derivation of the famous reciprocal relationships and a macroscopic thermodynamic derivation published by C. M. Sliepsevich that led to considerable discussion in the literature in …

Effects Of Uniaxial Cyclic Strain On Endothelial Progenitor Cells, Maria Alejandra Zeballos Castro

Biomedical Engineering Undergraduate Honors Theses

Despite the high prevalence of calcific aortic valve disease (CAVD), the underlying mechanisms of pathogenesis have not been found yet. Therefore, it is extremely important to study CAVD and understand how it develops. For this matter, we decided to study the potential of endothelial progenitor cells (EPCs) for use in tissue-engineered models of heart valves. EPCs were chosen as the cell source of interest for this study due to their high neovascularization potential and use in regenerative medicine and cardiovascular tissue engineering.

In this project, we aimed to engineer the microenvironment of cells that are involved in the formation of …

Exploring Energy, Comfort, And Building Health Impacts Of Deep Setback And Normal Occupancy Smart Thermostat Implementation, Zachary Ethan Alderman

Graduate Theses and Dissertations

As smart thermostat adoption rates continue to increase, it becomes worthwhile to explore what unanticipated outcomes may result in their use. Specific attention was paid to smart thermostat impacts to deep setback and normal occupancy states in a variety of conditions while complying with the ventilation and temperature requirements of ASHRAE 90.2-2013. Custom weather models and occupancy schedules were generated to efficiently explore a combination of weather conditions, building constructions, and occupancy states. The custom modeling approach was combined with previous experimental data within the Openstudio graphics interface to the EnergyPlus building modeling engine. Results indicate smart thermostats add the …

On The Fatigue Of Headed Shear Studs In Steel-Concrete Composite Bridge Girders, Brianna Laurene Ovuoba

Graduate Theses and Dissertations

Shear connectors are commonly used in steel bridges to join the concrete deck and steel superstructure, providing a mechanism for shear transfer across the steel-concrete interface. The most common shear connector is the headed shear stud. In the current AASHTO LRFD Bridge Specifications on composite design, shear stud fatigue often governs over static strength, and a large number of shear connectors often result. This dissertation investigates headed shear stud fatigue capacities and demands, and provides insight into conservancies in existing design specifications through examination of existing high-traffic bridge performance.

To investigate stud capacity, a total of six high-cycle fatigue tests …

Development Of An Internal Camera-Based Volume Determination System For Triaxial Testing, Sean Elliott Salazar

Graduate Theses and Dissertations

Accurate measurement of axial, radial, and volumetric strain parameters are critical to the understanding of phase relationships and the constitutive behavior for saturated and unsaturated soils. The use of photographic monitoring techniques for laboratory-based measurement of these parameters have become common. A novel technique that utilized camera instrumentation located within the triaxial testing cell was developed and validated. By placing the instrumentation inside of the cell, instead of the instrumentation being located outside of the cell, the technique eliminated cumbersome corrections required to account for optical distortions due to 1) the refraction of light at the confining fluid-cell wall-atmosphere interfaces, …

Cost-Savings Of Implementing Site-Specific Ground Motion Response Analysis In Design Of Mississippi Embayment Bridges, Ethan Ryan Benton Baker

Graduate Theses and Dissertations

Deep dynamic site characterization and a site-specific ground motion response analysis (SSGMRA) were conducted for a bridge site in Monette, Arkansas. The SSGMRA indicated the design acceleration response spectrum determined using the American Association of State Highway and Transportation Officials (AASHTO) general seismic procedure could be reduced by 1/3 for the short period range due to attenuation of the short-period ground motions. The steel girder pile-bent bridge, originally designed using the AASHTO general seismic design procedure, was redesigned using the updated seismic demands estimated from SSGMRA. A cost-savings analysis was then conducted to determine the potential savings associated with conducting …

An Evaluation Of Borehole Hydraulic Conductivity Equations And Field Determined Soil Water Characteristic Curves, Johnathan Dale Blanchard

Graduate Theses and Dissertations

The methods utilized to determine the hydraulic conductivity of compacted clay liners (CCLs) are of importance for safe guarding the environment from landfill leachate. Therefore, the methods utilized in the analysis of the Two Stage Borehole (TSB) test, as described in the ASTM D6391-11 (Method A, B, and C) standard, were evaluated. Data from hydraulic conductivity tests, as performed on three test pads, were utilized to review the ASTM D6391-11 equations. Additionally, two test pads were instrumented with volumetric water content and soil water matric potential sensors to facilitate the determination of field-obtained soil water characteristic curves (SWCCs) and hydraulic …

Automated Pin-Dot Marking Effects On A709-Gr50 Steel Plate Fatigue Capacity, Michael Andrew Noernberg

Graduate Theses and Dissertations

During fabrication of multi-piece steel bridge assemblies, markings are often made on the steel surface to identify/track individual pieces or to provide reference for fabrication layout or later erection. Automated marking methods such as computer numerically controlled (CNC) pin-dot marking offer fabrication efficiencies; however, for marked steel sections subjected to frequent or repeated loading (i.e. bridge girders) many code specifications require experimental testing to verify any marking effects on fatigue capacity. In this study, the effects of automated pin-dot markings on the fatigue capacity of A709-Gr50 bridge steel are experimentally investigated from 13 specimens considering 2 marking frequencies (corresponding to …

Evaluation Of Water Resources And Hydraulic Influences In The Restoration Of The Western Part Of The Mesopotamian Marshlands, Ali Kareem Al-Quraishi

Graduate Theses and Dissertations

The purpose of this study is to assess the water resources and water conveyance system of the western part of the Mesopotamian marshes (Al-Hammar marsh) as well as develop a water conveyance system to distribute water throughout the western Al-Hammar marsh. These processes are significant to identify the current restoration problems and help to create restoration strategies for the marsh. Also, proper management strategy to the Al-Hammar marsh is necessary to preserve the marsh ecosystem, irrigate lands, and provide domestic necessities in the villages.

The overall project is divided into three main chapters which address the current ecological and hydrological …

Dem Study Of A Single Stone Column In A Clayey Stratum, Anibal Enrique Santos

Graduate Theses and Dissertations

Aggregate piers are an alternative ground improvement technique used for improving the bearing capacity and reducing the total and differential settlement of foundations supported on compressible soils. The piers are composed of a series of vibrationally compacted aggregate lifts from a desired depth up to the finished foundation level. The shear strength of the coarse-grained material comprising an aggregate pier is defined by its internal friction angle. There are several factors affecting the friction angle of the granular material that include: confining stress, particle shape, relative density and particle distribution (gradation). These factors are not directly considered in the design …

3d Printed Pcu/Uhmwpe Polymeric Blends For Artificial Knee Meniscus, Raissa Araujo Borges

Graduate Theses and Dissertations

3D printing was used to fabricate porous artificial knee meniscus material from biocompatible polymeric blends of polycarbonate-urethane (PCU) and ultra-high-molecular-weight polyethylene (UHMWPE) to enable “weep” lubrication that mimics the native meniscus. 3D printed and molded pure PCU, as well as molded PCU and UHMWPE, were used for comparison. Preliminary printing was done to evaluate the impact of process parameters on the results. The samples were subject to a variety of rotational oscillating friction and wear tests under simulated body fluid and loading conditions to replicate the natural motion of the knee. Results show that 3D printed PCU samples yielded a …

Systematic Review For Water Network Failure Models And Cases, Yufei Gao

Graduate Theses and Dissertations

As estimated in the American Society of Civil Engineers 2017 report, in the United States, there are approximately 240,000 water main pipe breaks each year. To help estimate pipe breaks and maintenance frequency, a number of physically-based and statistically-based water main failure prediction models have been developed in the last 30 years. Precious review papers focused more on the evolution of failure models rather than modeling results. However, the modeling results of different models applied in case studies are worth reviewing as well.

In this review, we focus on research papers after Year 2008 and collect latest cases without repetition. …

Investigating Fate Of Silver Nanoparticles In Wastewater Biofilms, Connie Marie Walden

Graduate Theses and Dissertations

As industrial advances make everyday life easier for human kind, the processes by which we need to maintain sanitary conditions for both water and wastewater treatment will become increasingly complex. Innovations in food packaging and textile design incorporate engineered nanoparticles (ENPs) to increase antimicrobial properties of clothing, maintain product color, and keep food in packaging from spoilage. For most products, ENPs released will enter the sanitary sewer system, and ultimately wastewater treatment plants. Biofilms grow universally on surfaces where a protective layer of extracellular polymeric substances (EPS) shields attached cells from stressors. In wastewater treatment, complex biofilms are utilized as …