Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

University of Arkansas, Fayetteville

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1681 - 1710 of 2844

Full-Text Articles in Engineering

Immunostimulatory Effects Of Antigen-Conjugated Inp/Zns Quantum Dot Nanoparticles In An Avian Model, Christopher Lyle May 2018

Immunostimulatory Effects Of Antigen-Conjugated Inp/Zns Quantum Dot Nanoparticles In An Avian Model, Christopher Lyle

Graduate Theses and Dissertations

Due to their unique physicochemical and enhanced immunostimulatory properties, quantum dot (QD) nanoparticles have shown increasing promise in biomedical research applications including bioimaging, drug delivery, and as vaccine adjuvants. Toxicity, however, remains a concern for the use of QD in these applications and thus, there is an increased demand for effective in vitro and in vivo systems to measure the bioactivity of QD. In this study in vitro and in vivo chicken models were used to investigate the effects of QD on innate and adaptive immunity. Chicken macrophage cultures were treated in vitro with QD to measure macrophage activation and …


Structure And Property Of Polymers And Biopolymers From Molecular Dynamic Simulations, Xiaoquan Sun May 2018

Structure And Property Of Polymers And Biopolymers From Molecular Dynamic Simulations, Xiaoquan Sun

Graduate Theses and Dissertations

Natural and synthetic polymers and biopolymers have been studied for a variety of applications in food emulsion, biopharmaceutical purification, tissue engineering, and biosensor. The structure and property of polymers and biopolymers are critically important to determine their functions. Molecular dynamics (MD) simulations have a unique advantage to explore the structure and property of polymers and biopolymers from the molecular level. In the dissertation, MD simulations were conducted to study the mechanisms of various biological and chemical processes controlled by polymers and biopolymers based on real-world experimental results.

Seven heptapeptides have been screened from a peptide library in our earlier study …


Novel Methodology For Emboli Analog Production And In-Vitro Simulation Of Acute Ischemic Stroke, Anne Preut May 2018

Novel Methodology For Emboli Analog Production And In-Vitro Simulation Of Acute Ischemic Stroke, Anne Preut

Graduate Theses and Dissertations

Stroke is the leading cause of disability and a primary cause of mortality, resulting in an estimated $33 billion dollars spent on healthcare, rehabilitation and lost productivity in the United States each year. The most prevalent cause of stroke incidents are acute ischemic events, manifested as blood clots in the vasculature supplying the brain. Current gold standard treatments have improved since 2006 with the introduction of mechanical stent retrievers; however, several issues with the current treatments to acute ischemic stroke remain. Thrombolysis of the clot with a tissue plasminogen activator may lead to weakening the vessel wall and consequently, hemorrhaging. …


State Dependent Function And Dynamics In Cerebral Cortical Networks, Leila Fakhraei May 2018

State Dependent Function And Dynamics In Cerebral Cortical Networks, Leila Fakhraei

Graduate Theses and Dissertations

Cerebral cortex exhibits vigorous ongoing, internal neural activity even with no sensory input is present or the animal is minimally engaged in a task or behavior. This internal ongoing activity is not static; the ‘cortical state’ varies ranging from synchronous and highly correlated activity to asynchronous and weakly correlated neural activity. The main goal of the work presented here is to understand how changes in cortical states effect several aspects of cortical function and dynamics.

To meet this goal, we did three separate projects. First, we compared the predictability of neuronal network dynamics across cortical states in somatosensory cortex of …


The Effect Of Elastin Degradation On The Biomechanical Properties Of Porcine Aortic Tissue, Caleb Nissen May 2018

The Effect Of Elastin Degradation On The Biomechanical Properties Of Porcine Aortic Tissue, Caleb Nissen

Biomedical Engineering Undergraduate Honors Theses

The rupture of abdominal aortic aneurysms (AAA) is currently the 13th leading cause of death in the United States [1]. AAA is characterized, in part, by an increase in presence of proteolytic enzymes which degrade the structural proteins collagen and elastin [6]. The goal of this study was to examine the effect that elastin degradation has on the biomechanical properties of aortic tissue. For this experiment, porcine aortic tissue was cut in the circumferential and longitudinal directions. These specimens were exposed to an elastase solution for varying time-intervals and then underwent uniaxial tensile testing. Elastase-treated tissue tested in the …


In-Vitro Simulation Of Acute Ischemic Stroke, Paolo Garcia May 2018

In-Vitro Simulation Of Acute Ischemic Stroke, Paolo Garcia

Biomedical Engineering Undergraduate Honors Theses

Acute ischemic stroke (AIS) is a condition that involves the occlusion of a blood vessel within the brain, effectively preventing the passage of oxygen and nutrients. AIS is highly prevalent in the United States, where nearly 795,000 strokes happen per year and 87% of those are ischemic. From a medical standpoint, the obstructing clot can be removed with the use of a stroke retrieval device. However, a need arises for testing the aforementioned devices on a patient’s specific vascular geometries in order to increase the likelihood of a successful procedure. Outlined is a process for developing a physical simulation of …


A Nanoindentation Study Of The Fatigue Properties Of Al/A-Si Core-Shell Nanostructures, Jason Steck May 2018

A Nanoindentation Study Of The Fatigue Properties Of Al/A-Si Core-Shell Nanostructures, Jason Steck

Mechanical Engineering Undergraduate Honors Theses

Nanostructure-textured surfaces can reduce friction and increase the reliability of micro- and nanoelectromechanical systems (NEMS/MEMS). For MEMS incorporating moving parts, the fatigue properties of nanostructures pose a challenge to their reliability in long-term applications. In this study, the fatigue behavior of hemispherical Al/a-Si core-shell nanostructures (CSNs), bare hemispherical Al nanodots, and a flat Al/a-Si layered thin film have been studied using nanoindentation and nano-scale dynamic mechanical analysis (nano-DMA) techniques. Fatigue testing with nano-DMA shows that the deformation resistance of CSNs persists through 5.0 × 104 loading cycles at estimated contact pressures greater than 15 GPa. When the a-Si shell …


Development Of An In Vitro Platform For The Exploration Of Skeletal Muscle Cell Mechanobiology, Sydney Spradlin May 2018

Development Of An In Vitro Platform For The Exploration Of Skeletal Muscle Cell Mechanobiology, Sydney Spradlin

Biomedical Engineering Undergraduate Honors Theses

Muscles have the natural ability to regenerate when damaged. This works to keep the body functioning, unless this ability is overwhelmed. Volumetric muscle loss (VML) occurs when a substantial amount of a muscles mass is lost. This leads to the development of scar tissue, and often a loss of function. In order to find a solution for this condition, in vitro models are needed to explore the mechanobiology of skeletal muscle cells. Two platforms were developed in this study, to explore 3 factors: orientation, strain, and supporting structure. One platform used fibronectin stamped lanes on PDMS to encourage cell growth …


Pressure Acquisition System For In Vitro Mitral Valve Analysis, Laura Peck May 2018

Pressure Acquisition System For In Vitro Mitral Valve Analysis, Laura Peck

Biomedical Engineering Undergraduate Honors Theses

In vitro testing of the mitral valve chordae tendineae is utilized to aid in the understanding of the stresses that occur in vivo and improve upon surgical solutions that exist for mitral valve repair. This project aimed to design the water control system for a left heart simulation chamber, as well as the pressure acquisition inside the chamber. A solenoid valve was utilized to control the water supply to the tank and was powered utilizing National Instruments software. National Instruments hardware and software was also used with the pressure transducer in order to obtain pressure readings from the chamber. The …


Comparison Of Varying Tissue Freezing Methods On Murine Colonic Tissue, James Hughes May 2018

Comparison Of Varying Tissue Freezing Methods On Murine Colonic Tissue, James Hughes

Biomedical Engineering Undergraduate Honors Theses

Histology often requires a tissue specimen to be embedded so that it may be sectioned, stained, and mounted on a microscope slide for viewing. One common method of tissue embedding for rapid histology is freezing, since freezing allows tissue to be stored without the need for fixing. Frozen tissue is often embedded in a medium such as Optimal Cutting Temperature (OCT) compound so that it can be sectioned using a cryostat. However, factors such as ice-crystal formation during the freezing process can cause damage to the tissue. As such, the protocol used to freeze the tissue can affect the quality …


Analysis Of Biological Response To Ecm Hydrogel Injection, Grady Dunlap May 2018

Analysis Of Biological Response To Ecm Hydrogel Injection, Grady Dunlap

Biomedical Engineering Undergraduate Honors Theses

Abstract

Under normal circumstances, skeletal muscle possesses the capacity to regenerate and heal via inflammatory and myogenic pathways. In cases of severe tissue loss or certain diseases, this capacity is lost, often resulting in loss of tissue function. Extracellular matrix (ECM), the protein scaffold which houses cells in physiological tissue, has been shown to have structural and chemical properties which influence cell migration and phenotype. This results in ECM’s capacity to encourage a regenerative response when implanted into severely damaged skeletal muscle. Additional advantages are apparent when an ECM scaffold is digested into a hydrogel, namely less invasive implantation via …


Direct Potable Reuse Of Wastewater, Lauren Clark May 2018

Direct Potable Reuse Of Wastewater, Lauren Clark

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.5 The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there …


Direct Potable Reuse Of Wastewater, Sabrina Castle May 2018

Direct Potable Reuse Of Wastewater, Sabrina Castle

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.5 The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there are …


Direct Potable Reuse Of Wastewater, Molly Churchwell May 2018

Direct Potable Reuse Of Wastewater, Molly Churchwell

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.5 The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there are …


Removal Of Carbamazepine From Drinking Water, Zachary Wiese May 2018

Removal Of Carbamazepine From Drinking Water, Zachary Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few

decades, pharmaceuticals have accumulated in various water sources. This has become a

public health concern because many pharmaceuticals have limited research on the effects

of chronic low-level exposure. According to the World’s Health Organization (WHO),

traces of pharmaceuticals products have been reported in different water sources such as

surface waters, wastewater, groundwater, and drinking water.[1] One pharmaceutical of

interest that has been detected in water sources is carbamazepine. Carbamazepine is a

common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic

pain, and various psychological disorders. It’s mechanism …


Removal Of Carbamazepine From Drinking Water, Paola Marrero-Rivera, Adam Johnson, Jordan Alex Gadberry, Juan Rodriguez, Thomas Krumpolc, Zach Wiese May 2018

Removal Of Carbamazepine From Drinking Water, Paola Marrero-Rivera, Adam Johnson, Jordan Alex Gadberry, Juan Rodriguez, Thomas Krumpolc, Zach Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-level exposure.One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic pain, and various psychological disorders. It’s mechanism of action is “sodium channel blocking,” which is the impairment of conduction of sodium ions in sodium channels. This, in effect, reduces nervous-system conductivity in key areas …


Computational Fluid Dynamics Model For Air Velocity Through A Poultry Transport Trailer In A Holding Shed, Christian Heymsfield May 2018

Computational Fluid Dynamics Model For Air Velocity Through A Poultry Transport Trailer In A Holding Shed, Christian Heymsfield

Graduate Theses and Dissertations

Broiler production in Arkansas was valued at over $3.6 billion in 2013 (University of Arkansas Division of Agriculture Cooperative Extension Service). Consequently, improvement in any phase of the production process can have significant economic impact and animal welfare implications. One area of concern for the poultry industry is thermal stress experienced by the birds after arrival at the processing plant and before they are taken in to be processed, during which time they are left to wait in holding sheds. Various cooling strategies exist to mitigate heat stress in holding sheds, but in most cases it is unlikely that they …


Pid Algorithm Design For Automation Of Eukaryote Fermentation, Madison Mann May 2018

Pid Algorithm Design For Automation Of Eukaryote Fermentation, Madison Mann

Chemical Engineering Undergraduate Honors Theses

Single celled eukaryotic organisms are advantageous in the production of proteins for use in biopharmaceuticals due to their ease of cultivation and manipulation. Because of high cell density during fermentation and an ability to allow post-translational protein modifications, yeast is particularly well-suited. To maximize the specific formation rate of the desired proteins, an optimum specific growth rate of the yeast should be found and maintained. This rate is dependent upon pH, temperature, dissolved oxygen content, and carbon feed rate. Fermentation can be done in a fed batch reactor system, and it is possible to use a Buglab (online biomss) sensor …


A Proposed Process And Economic Analysis For A Manufacturing Facility For Nylon 6,6, Perry Doles May 2018

A Proposed Process And Economic Analysis For A Manufacturing Facility For Nylon 6,6, Perry Doles

Chemical Engineering Undergraduate Honors Theses

The global nylon market is a multi-billion-dollar industry that has been thriving in recent years due to advances in the process technology and its flexibility as a material. Nylon 6,6 is a versatile material with uses in many industries because of its ability manipulated into many forms. It is commonly used in applications that require heat resistance, chemical resistance, and high mechanical strength. It is commonly used in luggage, car parts, carpets, and many other plastic products that require the properties that nylon 6,6 exhibits. The versatility and demand for nylon 6,6 make it an attractive process for many potential …


Removal Of Carbamazepine From Drinking Water, Jordan Alex Gadberry, Adam Johnson, Juan Rodriguez, Paola Marrero-Rivera, Tom Krumpolc, Zach Wiese May 2018

Removal Of Carbamazepine From Drinking Water, Jordan Alex Gadberry, Adam Johnson, Juan Rodriguez, Paola Marrero-Rivera, Tom Krumpolc, Zach Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-level exposure. According to the World’s Health Organization (WHO), traces of pharmaceuticals products have been reported in different water sources such as surface waters, wastewater, groundwater, and drinking water.[1] One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic pain, and various psychological disorders. …


Sulfate Removal From Mine Impacted Waters, Luis Sagarnaga May 2018

Sulfate Removal From Mine Impacted Waters, Luis Sagarnaga

Chemical Engineering Undergraduate Honors Theses

Woo Pig Sulfate (WPS) has developed two methods for reducing levels of calcium sulfate in mine impacted waters, a “hot process” and a two-stage nanofiltration process. Both processes were designed to treat gypsum saturated water that is currently being pumped via interceptor wells to prevent the spread of a sulfate plume into a nearby community. Each solution was designed for Freeport McMoran’s Sierrita mine in Green Valley, Arizona, which was visited in order to gain insight about the problem. Below 250 ppm on the treated stream, nanofiltration and the hot process achieve overall recoveries of 84 and 99%, respectively. The …


Cross-Linking Amyloid Forming Proteins For Improved Understanding Of Early Aggregation, Gram Booth May 2018

Cross-Linking Amyloid Forming Proteins For Improved Understanding Of Early Aggregation, Gram Booth

Chemical Engineering Undergraduate Honors Theses

Alzheimer’s disease is the only disease in the ten leading causes of death in the United states that cannot be slowed, prevented, or cured. Alzheimer’s dementia and type II diabetes are the top two diseases caused by improper protein folding, aggregation, and deposition of fibrillar plaques in tissues. These plaques, originally thought to be the cause of these diseases, have been discovered to be mostly benign and representative of the later stages of the disease. The smaller, more soluble oligomeric aggregates are responsible for the death of pancreatic and neural cells. Many oligomeric species are unstable and exist only for …


Direct Potable Reuse Of Wastewater, Boyce Bethel May 2018

Direct Potable Reuse Of Wastewater, Boyce Bethel

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.5 The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there …


Securing Soft Ips Against Hardware Trojan Insertion, Thao Phuong Le May 2018

Securing Soft Ips Against Hardware Trojan Insertion, Thao Phuong Le

Graduate Theses and Dissertations

Due to the increasing complexity of hardware designs, third-party hardware Intellectual Property (IP) blocks are often incorporated in order to alleviate the burden on hardware designers. However, the prevalence use of third-party IPs has raised security concerns such as Trojans inserted by attackers. Hardware Trojans in these soft IPs are extremely difficult to detect through functional testing and no single detection methodology has been able to completely address this issue. Based on a Register-Transfer Level (RTL) and gate-level soft IP analysis method named Structural Checking, this dissertation presents a hardware Trojan detection methodology and tool by detailing the implementation of …


Near Bandgap Two-Photon Excited Luminescence Of Inas Quantum Dots, Xian Hu May 2018

Near Bandgap Two-Photon Excited Luminescence Of Inas Quantum Dots, Xian Hu

Graduate Theses and Dissertations

Semiconductor quantum dots (QDs) confine carriers in three dimensions, resulting in atomic-like energy levels as well as size-dependent electrical and optical properties. Self-assembled III-V QD is one of the most studied semiconductor QDs thanks to their well-established fabrication techniques and versatile optical properties. This dissertation presents the photoluminescence (PL) study of the InAs/GaAs QDs with both above bandgap continuous-wave excitation (one-photon excitation) and below-bandgap pulse excitation (two-photon excitation). Samples of ensemble QDs, single QD (SQD), and QDs in a micro-cavity, all grown by molecular beam epitaxy, are used in this study. Morphology of these samples was examined using atomic force …


Evaluation Of Terahertz Imaging For Breast Cancer Detection Using Image Morphing, Tanny Andrea Chavez Esparza May 2018

Evaluation Of Terahertz Imaging For Breast Cancer Detection Using Image Morphing, Tanny Andrea Chavez Esparza

Graduate Theses and Dissertations

This thesis proposes the use of a mesh morphing algorithm for the quantitative evaluation of terahertz (THz) images. This work differs from traditional evaluation methods based on qualitative evaluation because it provides a fair and quantitative measurement of the THz imaging system's performance. The objective of the algorithm is to match the alignment, shape, and resolution of the THz and reference pathology images. Therefore, the proposed morphing method provides a pathology reference for a pixel-by-pixel evaluation of the region classification in the THz image. To achieve this, the morphing algorithm aligns the images using the Pearson's correlation coefficient and reshapes …


The Incorporation Of Graphene To Lithium Cobalt Oxide As A Cathode To Improve The Performance Of Lithium Ion Batteries, Kenan Wang May 2018

The Incorporation Of Graphene To Lithium Cobalt Oxide As A Cathode To Improve The Performance Of Lithium Ion Batteries, Kenan Wang

Graduate Theses and Dissertations

One of the objectives of this thesis work was to investigate the cathode performance of lithium cobalt oxide (LiCoO2) incorporated with graphene powder in lithium ion batteries (LIBs). Graphene powder was incorporated into cathode materials to enhance the performance of LIBs. The other objective was to impede the construction of a solid electrolyte interphase (SEI) sheet using graphene sheet coating on its cathode.

The results of this work show that adding graphene powder improved the performance of LiCoO¬2 as a cathode material. With the incorporation of different weight percentages of graphene powder, the LiBs showed distinct changes in their charging …


Understanding The Evolution Of Surface Texture Under Boundary Lubrication, Salil T. Bapat May 2018

Understanding The Evolution Of Surface Texture Under Boundary Lubrication, Salil T. Bapat

Graduate Theses and Dissertations

The objective of this research was to understand the evolution of surface texture under boundary/mixed lubrication (BL). Significant material/energy losses occur during BL because of direct contact between the two surfaces. Traditionally, tribofilms have been studied extensively for BL while textures have been used as a static engineering design parameter to enhance lubricant film properties. However, texture is dynamic at the tribological mating interface, where both physical and chemical interactions are continuously modulated. The evolution and the interplay between the tribofilm and texture is least studied in the literature, which is the focus of this research.

MoS2-based lubricants, known for …


Predicting The Impact Of Resource Delays On A Construction Project’S Critical Path Using Monte Carlo Simulation, Colby Weishaar May 2018

Predicting The Impact Of Resource Delays On A Construction Project’S Critical Path Using Monte Carlo Simulation, Colby Weishaar

Graduate Theses and Dissertations

The construction industry is a complex and evolving industry, making the project manager’s job of planning, organizing, and making decisions a difficult one. One of the most difficult decisions throughout a project is determining what resources are needed to complete a task by the deadline. Uncertainties cause risks within the schedule often creating delays for which the project manager must develop a mitigation plan once risks are identified. After conducting a review of the literature, no research was found examining the use of an analytical model to estimate the delays caused within the resource allocation process. If an analytical model …


Glucose Level Estimation Based On Invasive Electrochemical, And Non-Invasive Optical Sensing Methods, Sanghamitra Mandal May 2018

Glucose Level Estimation Based On Invasive Electrochemical, And Non-Invasive Optical Sensing Methods, Sanghamitra Mandal

Graduate Theses and Dissertations

The purpose of this research is to design and fabricate sensors for glucose detection using inexpensive approaches. My first research approach is the fabrication of an amperometric electrochemical glucose sensor, by exploiting the optical properties of semiconductors and structural properties of nanostructures, to enhance the sensor sensitivity and response time. Enzymatic electrochemical sensors are fabricated using two different mechanisms: (1) the low-temperature hydrothermal synthesis of zinc oxide nanorods, and (2) the rapid metal-assisted chemical etching of silicon (Si) to synthesize Si nanowires. The concept of gold nano-electrode ensembles is then employed to the sensors in order to boost the current …