Engineering Commons^™

Intruder Preference And Route Selection: A Gis Data Approach, Griffin Mathews

Industrial Engineering Undergraduate Honors Theses

The Department of Homeland Security (DHS) requested an Engineering Research and Development Center study incorporating modeling and simulation to determine the selection, amount, and optimal location of sensor suites along the U.S. Border. The study objective is to maximize the probability of detection and apprehension of illegal elements attempting to enter. A study on intruders and their preferences were conducted to create an intruder preference value map to determine the preferred intruder routes taken after crossing the border. The results of this research were integrated into another study on the selection and simulation of sensor suites.

Intruder context and preferences …

Redesign And Quantitative Assessment Of An Accelerated Venous Valve Fatigue Apparatus, Megan Kueh

Biomedical Engineering Undergraduate Honors Theses

Chronic venous insufficiency (CVI) is a form of cardiovascular disease that is caused when valves in the leg become incompetent. Current treatment methods serve to manage symptoms, but there are currently no ways to treat the underlying cause of CVI. A venous valve prosthetic made from a xenograft of a bovine jugular vein is one possible treatment method currently in the research phase. Prosthetic valves must be tested with an accelerated wear tester prior to approval for clinical testing. Although such testers exist for heart valves, physiological differences between heart and venous valves restrict the use those testers on venous …

The Utilization Of Autofluorescence To Study The Effects Of L-Buthionine-Sulfoximine On Cellular Metabolism In Vitro, Madison Belew

Biomedical Engineering Undergraduate Honors Theses

Oxidative damage and stress impacts metabolic activity and has been implicated in a number of diseases . These medical conditions have been found to be associated with a lack of glutathione (GSH). There is a need to study the effects that the absence of glutathione has in order to expand knowledge of indicators that cause conditions like cataracts, cancer, or impaired wound healing. L-buthionine-sulfoximine (BSO) has been used in past studies to hinder GSH production and induce oxidative stress within a cell. This study explores the effects of BSO and induced oxidative stress on the metabolic activity and processes within …

Simulation Modeling Of Cross-Dock And Distribution Center Based Supply Chains, Ghewa Al Chall

Graduate Theses and Dissertations

Companies are implementing new strategies to meet the customer requirements in terms of quality, timing, and cost. One of these strategies is cross-docking, which can be defined as the process of consolidating the products coming from different suppliers, but having the same destination, with minimal handling and almost no storage between loading and unloading of the goods. The purpose of this research is to investigate the benefits of having a cross-docking facility in a supply chain. In this research, we focus on developing discrete event simulation models using the opensource Java Simulation Library (JSL). Also, we work on augmenting an …

Improving Pv Module Efficiency Through Cooling, Blake Bradley

Chemical Engineering Undergraduate Honors Theses

The Solarbacks researched and designed a variety of cooling methods that could be used to improve the efficiency of photovoltaics. These cooling methods can be separated into two categories: active and passive methods. The active cooling method of hydraulic cooling and the passive cooling methods of heat sinks (fins), optical coatings, thermosyphons, phase change materials, and thermoelectric generators were all taken into consideration as potential cooling methods. Passive cooling methods were preferred because the use of electricity required for the cooling mechanism would reduce the net electricity and subsequent profit from the panels.

Two variations of hydraulic cooling were researched: …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Ethan Phan, Adrian Damian, Kevin Le, Mary Johnson, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective high-density sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Jacqueline Payne, Mary Johnson, Kevin Le, Michelle Dopp, Courtney Golman, Adrian Damian, Ethan Phan

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective highdensity sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Improving Pv Module Efficiency Through Cooling, Megan Reynolds

Chemical Engineering Undergraduate Honors Theses

The Solarbacks researched and designed a variety of cooling methods that could be used to improve the efficiency of photovoltaics. These cooling methods can be separated into two categories: active and passive methods. The active cooling method of hydraulic cooling and the passive cooling methods of heat sinks (fins), optical coatings, thermosyphons, phase change materials, and thermoelectric generators were all taken into consideration as potential cooling methods. Passive cooling methods were preferred because the use of electricity required for the cooling mechanism would reduce the net electricity and subsequent profit from the panels.

Two variations of hydraulic cooling were researched: …

Solution To Exide Technologies Inbatec Inefficiency, Spencer Christian, Shixuan Hou, Mary Fairley, Reagan Gilker, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries. The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …

Multiaxial Fatigue Of Notched Steel Plates And Investigation Of Cfrp Retrofits For Crack Initiation Prevention, Ayumi Fujii

Civil Engineering Undergraduate Honors Theses

Fatigue cracks are cracks that result from repeated loading over time, often following millions of loading cycles. Fatigue cracks occur even if the applied load is not large enough to cause material yield. Once a fatigue crack initiates, resulting stress concentrations at the crack tip often make it difficult to arrest the growth of the crack. In order to prevent growth and propagation of fatigue cracks within structural components, it is necessary to alter the stress condition at the crack tip. Fatigue cracks in steel structures resulting from multiaxial loading and or geometry conditions that result in complex states of …

Solution To Exide Technologies Inbatec Inefficiency, Shixuan Hou, Reagan Gilker, Mary Fairley, Spencer Christian, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries. The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …

Re-Evaluating Coverage Metrics For Wireless Sensor Network Border Security Applications, Kevin Haney

Industrial Engineering Undergraduate Honors Theses

Wireless sensor networks are an emerging technology used to monitor an environment over time. One specific application of the wireless sensor network is the border security application. Researchers have adapted coverage metrics from general wireless sensor network literature to fit the border security application. While some of the adapted metrics count the number of sensors detecting a potential target, others measure the distance between a potential target and its nearest sensor. No existing metric accounts for both of these factors. To take advantage of this gap and to attempt to increase the accuracy to which coverage is measured in this …

The Release, Transport, And Utilization Of Phosphorus From Bed-Sediments: A Study Of A Eutrophic Littoral Cove On Beaver Lake In Northwest Arkansas, James A. Mccarty

Graduate Theses and Dissertations

Eutrophication of surface waters not only impacts the environment but also water treatment processes, the most significant of which is from the effects of algae. During peak algal growth in many southern U.S. reservoirs, inflows that bring nutrients are at an annual minimum, and phosphorus released from bed-sediments is trapped in the hypolimnion. Littoral areas, described as the most productive zone of the lake, may be a possible source of phosphorus that fuels algal growth in the reservoir. I studied an isolated shallow cove in the War Eagle Creek arm of Beaver Lake in Northwest Arkansas to measure, quantify, and …

A Virtual Space Vectors Based Model Predictive Control For Three-Level Converters, Waleed Saad S. Alhosaini

Graduate Theses and Dissertations

Three-phase three-level (3-L) voltage source converters (VSC), e.g., neutral-point clamped (NPC) converters, T-type converters, etc., have been deemed to be suitable for a wide range of medium- to high-power applications in microgrids (MGs) and bulk power systems. Compared to their two-level (2-L) counterparts, adopting 3-L VSCs in the MG applications not only reduces the voltage stress across the power semiconductor devices, which allows achieving higher voltage levels, but also improves the quality of the converter output waveforms, which further leads to considerably smaller output ac passive filters.

Various control strategies have been proposed and implemented for 3-L VSCs. Among all …

Countermeasures For Pedestrian-Involved Accidents On Interstate-Highways, Anna C. Hunter

Civil Engineering Undergraduate Honors Theses

Pedestrian access to the Interstate is prohibited, but many pedestrian-involved accidents still occur on the Interstate in the United States. This project is a case study of West Memphis, Arkansas, which has the second highest occurrence of pedestrian-involved accidents on the Interstate in Arkansas. The study site location includes a segment of Interstate I-40 which is at- grade. The surrounding area contains several different land-uses, which is believed to be the primary generator of these accidents. The goal of this project is to determine the primary causes of these accidents and determine potential countermeasures to reduce the crash rate for …

Understanding Workability In Belitic Calcium Sulfoaluminate Concrete Mixtures, Caleb W. Chesnut

Civil Engineering Undergraduate Honors Theses

Belitic Calcium Sulfoaluminate cement (BCSA) is an emerging technology in the concrete industry. BCSA has similar hardened properties to portland cement (PC) but can set in under 20 minutes and reach 4,000 psi in less than 2 hours. Portland cement accounts for 8% of the world’s CO2 emissions, BCSA cements require less energy to produce. Studies have shown that 40% less CO2 is emitted during the production of BCSA cement than portland cement. This environmental benefit also makes it a very promising PC alternative. Before a new material can be used, designers need to understand the material’s properties. The goal …

Preliminary Investigation Of Required Bsca Amount For Soil Cement Mixtures, Mariel Mayori Rivero

Civil Engineering Undergraduate Honors Theses

The recent increase of flooding in the United States and the high expenses related to the damage that these floods have caused to waterway structures suggests a potential interest in rapid setting soil cement to make effective repairs. For this thesis, mix designs of soil only at three different sand-clay proportions were prepared and tested for moisture content and maximum dry density. Due to the early closing of the laboratory and research activities, reliable results were collected from the 70% sand and 30% clay proportions. At those proportions of soil, the optimum moisture content was found to be 8.88% with …

Soil Moisture Content Determination By Means Of The Electromagnetic Spectrum, Julia Loshelder

Civil Engineering Undergraduate Honors Theses

Soil moisture content provides information about the strength, permeability, and compressibility of the soil under investigation. In the research described herein, the relationship between moisture content and reflectance values obtained from spectroscopy was developed to investigate whether in-situ moisture content can be determined in a faster and more efficient way than the current methods. The soil under investigation was laboratory-compacted kaolinite clay mixed with pyranine dye. These specimens were placed beneath an ultraviolet light and a halogen illuminator where reflectance values were collected over a 24-hour period. Correlations were developed from the following methods: 1) spectral indices, 2) continuum analyses …

Solution To Exide Technologies Inbatec Inefficiency, Mary Fairley, Reagan Gilker, Spencer Christian, Shixuan Hou, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries.

The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …

Design Of A Shallow-Aero Ebb And Flow Hydroponics System And Associated Educational Module For Tri Cycle Farms, Julie Halveland

Biological and Agricultural Engineering Undergraduate Honors Theses

Tri Cycle Farms, whose main mission is to reduce food insecurity in their community, is a non- profit urban farm in Fayetteville, Arkansas. The “Tri” in their name refers to the three parts of their foundation: giving a third of their yield to volunteers, giving a third to local food pantries, and selling a third to sustain the farm and demonstrate the economy of local food production. They want to expand on the third part and have a vision of building a hydroponic greenhouse with the intention that it will create more crops to sell and give, as well as …

Improving Pv Module Efficiency Through Cooling, Harrison Dawson

Chemical Engineering Undergraduate Honors Theses

The Solarbacks researched and designed a variety of cooling methods that could be used to improve the efficiency of photovoltaics. These cooling methods can be separated into two categories: active and passive methods. The active cooling method of hydraulic cooling and the passive cooling methods of heat sinks (fins), optical coatings, thermosyphons, phase change materials, and thermoelectric generators were all taken into consideration as potential cooling methods. Passive cooling methods were preferred because the use of electricity required for the cooling mechanism would reduce the net electricity and subsequent profit from the panels.

Two variations of hydraulic cooling were researched: …

Utilization Of Recycled Filament For 3d Printing For Consumer Goods, Alexa Peterson

Apparel Merchandising and Product Development Undergraduate Honors Theses

The 3D printing market has been used in a wide variety of manufacturing industries including textile and apparel. Many consumers can now own a personal 3D printer at home for recreational printing. There are even websites dedicated to 3D printing patterns made by consumers. However, the materials used in the 3D printing process pose a problem for the environment due to their plastic-based nature. 3D printing is a layered process with each layer being printed depending on the layer below it for strength and stability. During the 3D printing process, great amounts of waste are produced as a result of …

Theoretical Applicability Of Crispr-Mediated Exon Skipping In Duchenne Muscular Dystrophy, Andrew Greek

Biomedical Engineering Undergraduate Honors Theses

Duchenne muscular dystrophy (DMD) affects approximately 1 in 5,000 males. DMD results from genetic mutations within the gene that interrupts the open reading frame and prematurely truncates the protein. From a non-functional dystrophin protein, DMD results in serious muscle weakening and muscle wasting ultimately leading to death around the age of 26. In some cases of muscular dystrophy, a mutation can occur in areas of the gene that are less essential. In Becker muscular dystrophy (BMD), these mutations cause less significant consequences in phenotype as the dystrophin protein is still semi-functional. With gene editing techniques, it may be possible to …

Cell Line-Specific Differences In Guided Differentiation Of Adipose-Derived Mesenchymal Stem Cells Towards Smooth Muscle Cells, Sherly Makar

Biomedical Engineering Undergraduate Honors Theses

Mesenchymal stem cells (MSCs) are a population of stromal cells found traditionally in the bone marrow and adipose tissues. They can also be found in other tissues including fallopian tube, core blood, peripheral blood, fetal liver, and lungs. Mesenchymal stem cells have profound effects in regenerative engineering, tissue repair and drug discovery owing to the excellent properties such as proliferation, self-renewal, and multipotency generating multiple cell types including adipocytes, osteocytes, cardiomyocytes (CMs), pericytes (PCs), and chondrocytes. MSCs are used as immunomodulators in generating progenitor cells to be used for transplantation, creating engineered organs, and preventing graft vs. host disease (GVHD). …

Characterization Of Oxone Mediated Tempo-Oxidized Nano Cellulose Mixed-Matrix Membranes During Ultrafiltration And Hemodialysis, Kristyn Robling

Biomedical Engineering Undergraduate Honors Theses

The ninth leading cause of death in the United States is kidney disease, and hemodialysis is the process most commonly prescribed for treatment. It utilizes a selectively permeable membrane filter to remove toxins such as urea from the blood and retain necessary protein levels. However, traditional filters, such as cellulose triacetate, used during dialysis can be inefficient in terms of separation performance and reduction of fouling. Recent exploration of nanoparticles has resulted in the creation of Oxone Mediated TEMPO-Oxidized Nano Cellulose which has properties that are believed to increase hydrophilicity, increase tensile capacity, decrease membrane resistance and lower fouling, making …

Differential Patterns Of Theta Activation Underlying Various Cognitive Control Strategies, Jarrod Eisma

Biomedical Engineering Undergraduate Honors Theses

In this study, EEG was recorded from 157 participants at the University of Arkansas as they performed three computer tasks that tested inhibitory control (Go/Nogo Task), proactive and reactive control (AX-Continuous Performance Task), and resolving response conflict (Global/Local Task- modified Flanker Task). Time-frequency analysis (ERSP) was the primary focus of this study, in order to take advantage of the temporal and frequential characteristics of EEG recordings. The ERSPs and following statistical analysis showed significantly higher midfrontal theta band (4-8 Hz) power values for target trials (those that required more cognitive control) than control trials, which indicated that the procedure was …

Comparative Genomics Of Human Mesenchymal Stem Cells And Human Mesenchymal Stem Cells Derived Vascular Smooth Muscle Cells, Samia Ismail

Biomedical Engineering Undergraduate Honors Theses

As of 2017, vascular diseases contributed to 23.1% of all deaths in America. To address the need for more effective and sustainable treatment options for these ailments, stem cell differentiation and implantation has emerged as a viable alternative to standard bypass and graft insertions. A completely autologous treatment can be achieved by extracting adult stem cells, differentiating them into vascular smooth muscle cells (VSMCs), and then reimplanting these cells at the affected tissue site. This study aims to investigate the efficiency of the VSMC differentiation from human mesenchymal stem cells (hMSCs) by comparing 4 cell lines of untreated hMSCs with …

Modified Stent Design For A Coronary Bifurcation Lesion, Abigail Nowell

Biological Sciences Undergraduate Honors Theses

Currently, 18.2 million adults aged 20 and older are diagnosed with Coronary Artery Disease (CAD) (Benjamin et al., 2019). Stenosis is the most common intervention. However, when a patient has a bifurcated artery, treatment becomes more difficult and is often unsuccessful. This project created a new stent and balloon complex that was tested in vitro using a gel phantom artery model. Two separate prototypes have been created and tested so far, with improvements made upon each. Testing is still underway with Prototype 2.

Scale-Up Of Polyaniline Cellulose Membranes, Isaac Bodemann

Chemical Engineering Undergraduate Honors Theses

Polyaniline coated cellulose membranes show impressive conductive properties that may be used to innovate traditional charged separation techniques, such as electrodeionization. However, these membranes are not sold to consumers, so they cannot be easily integrated into such systems. This research focuses on the scale-up and development of positively charged anion exchange membranes to be used in EDI cells. Novel cellulose membranes were made using lab-specific cellulose. These membranes were then coated using a polyaniline technique adopted from a paper titled, “Flexible Electrically Conductive Nanocomposite Membrane Based on Bacterial Cellulose and Polyaniline." This paper details the methods used to add the …

Solution To Exide Technologies Inbatec Inefficiency, Reagan Gilker, Mary Fairley, Spencer Christain, Shixuan Hou, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries.

The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …