Engineering Commons^™

Propagation Of Millimeter Wave Signals In Forests Using The Equation Of Radiative Transfer With Strong Forward Scattering Phase Functions, Nack Yang Cho

Dissertations

A forest is a highly scattering medium at millimeter wave frequencies. The propagation of cw millimeter wave signals in forests has been studied previously, both theoretically and experimentally. Published experimental data verified that continuous wave transmission is possible over lengths of the order of a few hundred meters and that a forest acts to strongly scatter energy in the forward direction. The cw studies yielded the determination of the range dependence, beam broadening effects and depolarization effects of millimeter wave signals in a forest. However, pulse broadening effects, which are of importance particularly in the case of digital signal transmission, …

Manufacturing Workstation Model Using Petri Nets, Reni Alexander

Theses

Petri nets have become a powerful tool for modeling and analyzing asynchronous concurrent systems. In this thesis I apply Petri nets for analyzing and modeling a flexible manufacturing workstation (FMS). A manufacturing workstation is modeled by using Colored- Timed Petri nets, with the consideration of tool handling, raw materials, quality checking and the reuse of reworkable scraps. A simulation program for a simplified Petri net model of manufacturing workstation is described and the production throughput is computed.

Robotic Arms With Flexible Links As The Links Approach Rigidity, George A. Downes

Theses

The dynamics of single link flexible robotic arms are modeled using the Bernoulli-Euler beam equation and Lagrange's equation. The Bernoulli-Euler beam equation derivation is reviewed and is studied in the limiting case as the flexiblity approaches zero. Using the Bernoulli-Euler beam equation, a procedure is developed to calculate the position of the endpoint of a link given the displacement, slope or curvature of any point on the link. Also a procedure is developed to calculate the minimum Young's modulus of elasticity, E, given a specified endpoint displacement tolerance.

A rigid link model based on Lagrange's equation and a flexible link …

On-Line Dot Matrix Code Verification, Thatta V. Premnath

Theses

Machine vision principles are increasingly applied in the areas of manufacturing and automated inspection. The objective of this thesis work is to investigate different methods that could be implemented for matching printed dot matrix characters with the actual characters to be printed.

In support to this investigation, a survey of various methods proposed by researchers in the field of Optical Character Recognition (OCR) is presented. Survey includes a detailed description of the state-of-the art methods. It is shown that due to restrictions of hardware cost and the time available to inspect each character, the standard approaches are not practical. Hence, …

Process Modelling Of The Nitration Of Toluene, Nitin K. Shah

Theses

The thesis on the process modelling of the nitration process focuses specifically on the product separation of the nitrated aromatic material from the reactor and - wash section of the process. Included in the text is an overview of the main process steps associated with the production of para and ortho-nitrotoluene. The critical issues concerning the reaction of nitric acid and toluene were summerized, and resulted in this subject being deferred for future work.

The separation of the isomers into pure components is an important. part of the MNT process because of the close high boiling points of the isomeric …

Thermal Decomposition Of Chlorobenzene Reaction With Hydrogen And Oxygen Mixture In An Atmosphere, Chun-Chen Yang

Theses

The thermal reactions of chlorobenzene in hydrogen and oxygen mixtures were studied in tubular flow reactors at 1 atmosphere total pressure. Experiments were carried out in flow reactors of varied diameter for determining effects of different surface to volume ratios. Residence times ranged from 0.03 to 2.5 seconds and temperature was varied over a range of 560 - 660 °C. The 02/H2 ratios ranged from 1% to 5%.

It was found that the conversion of chlorobenzene in hydrogen and oxygen mixtures increased with both temperature and residence time. The oxidation of chlorobenzene also occurred more rapidly when oxygen concentraction was …

Agitation Requirements For Complete Drawdown Of Floating Solids In Stirred Tanks, Joseph Philemon Mmbaga

Theses

The agitation requirements for complete drawdown of floating solids in mechanically agitated tank vessels has been studied both theoretically and experimentally.

A semi-theoretical equation has been derived on the basis of Kolmogoroff's theory of isotropic turbulence to determine the minimum impeller speed required for drawdown. The equation contains one adjustable parameter which has been found to be a function of the impeller type and position in the tank vessel.

The equation was tested using various vessels and impeller configurations. The solid phase consisted of high density polyethylene (density = 897kg/m³), low density polyethylene (density = 840kg/m³) …

Reliability Prediction Of Vulcanized Fibre Using Electrical Noise As A Screening Parameter, George A. Donos

Theses

The main objective of this thesis was to find a correlation between the electrical noise generated within the body of Vulcanized Fibre in insulating service and the time of its breakdown under a synergy of electrical, thermal and mechanical stresses. Failure was defined as a material discontinuity, puncture, under accelerated life test conditions. Radio frequency measurements of the partial discharges occuring in the voids of the material were performed on 1240 samples of vulcanized fibre with 10 mil thickness. The level of electrical noise measured was used to classify the specimens into the three following categories: (a) Low Noise:0-2.8μV (0-9db), …

Theoretical Analysis Of Universal Joint With Manufacturing And Assembly Tolerances, Xiaosong Liu

Theses

The model for a Cardan joint with manufacturing and assembly tolerances is a spatial four-bar mechanism with one rotating and three cylindrical joints. In this thesis, dual-number coordinate transformation matrices and Newtonian mechanics are applied to provide a concise description of the kinetics of the universal joint. The dual-Euler equations are used to derive the dynamic equations of the Cardan joint. The analytical technique presented here yields explicit expressions. It will provide the designer with better insight into the workings of the kinematics and dynamics of the Cardan joint.

The equations of statics and dynamics of the frictionless universal joint …

Recursive System Identification Using Least Squares Method, Gholamreza Ghorbani Moghadam

Theses

Input and output sampling, in addition to computer simulations, are now an integral part of system identification. In this thesis, the concept of analyzing any time invariant continuous deterministic system will be developed by identifying a linear discrete - time system equivalent to the continuous one. In this method, two computer programs are written in pascal. The first program applies the Recursive Least Squares Method to discrete - time systems in order to estimate the system components. The second program estimates the future output of the system. Four systems have then identified using the programs.

In this process, system identification …

Equation Of Interaction Diagrams For Prestressed Concrete Columns, Angamuthu Palaniappan

Theses

A general analysis and design equation for prestressed concrete column is proposed. This equation represents the strength interaction diagrams of prestressed concrete columns under bending about one axis and combined with axial load. The equation proposed is a modification of the one developed by Dr. Hsu, C.T. Thomas for reinforced concrete columns published in the ACI structural journal in 1988. The analytical results were compared with the results of tests on 30 eccentrically loaded prestressed columns reported by H.R. Brown and A.S. Hall. The results were in good agreement with the static analysis and the above mentioned test reports. The …

Experimental Study Of Rectangular And Square Concrete Member Under Combined Biaxial Bending And Tension, Ming-Hua Shiau

Theses

The proposed research is based on an equation developed by Dr. Hsu, which represents the strength interaction diagrams and failure surface for reinforced concrete rectangular and square columns under combined biaxial bending and axial load. In this research, two rectangular columns and two square columns subject to biaxial bending and tension were tested and compared with the proposed failure surface equation. This study shows that the experimental test results achieve more strengths then those calculated by the equation of failure surface.

Evaluation Of Sorting Algorithm Performance On Single Instruction Multiple Data Machines, Dong Kuen Yang

Theses

Partitioning an application program into several tasks and executing them via parallel processing is one way to increase computation throughput and performance. But with a uniprocessor system, the performance increase will be minimal. Computer scientists have developed several multiprocessor systems to gain more speed in computation.

There are several computer architectures, such as pipeline machines, array processors and multiprocessor systems. They provide a parallel execution environment to increase the execution speed. But as the system becomes more complex, the communication traffic density between several processors increases more heavily. It has to provide some kind of control algorithm or routing function …

Adaptive Transform Coding Of Video With Motion Compensation And Vector Quantization, Jung-Hui Chien

Theses

This thesis proposes an efficient transform coding scheme for the low bit rate video sequence. The redundancy within adjacent video frame is exploited by motion compensated interframe prediction using the efficient independent orthogonal search technique, and the motion compensated frame difference (MCFD) signal is transform coding by 1-D DCT, 1-D HDCT and 2-D DCT, the coefficients are zonal masked, and vector quantizatied adaptively. The encoded MCFD as well as the motion information and variance grouping (side informations) are transmitted to the receiver to reconstruct the frame. The transform MCFD signal is classified into the four groups according to the coefficient …

Design And Analysis Of An Intracranial Pressure And Temperature Sensor Telemetry System, Anshumat Parasar

Theses

This thesis presents a signal conditioning and telemetry system for an implantable pressure and temperature transducer. The initial target application is for measuring the epidural intracranial pressure in the range of 25-100 millitorr and temperature over the range 90 — 110° F. The implant, based on custom silicon IC design can be packaged within a volume of 2cm3 and will require surgical procedures for placement and removal. Effort has been made in this thesis to design the transducer, associated signal conditioning and telemetry circuits for useful operation over a wide range of power supply voltage. The implanted device is powered …

Protein Separation With Mathematical Modeling For Chromatographic Operation, Hsien-Chih Ma

Dissertations

We have performed experiments and derived mathematical models for packed bed columns used for liquid phase chromatographic separations of proteins with impulse input of feed solutions. These models can now be used to describe the relationships between the elution characteristics (peak height, peak position, and shapes) and the operating conditions (flow rate and buffer conditions) of ion exchange and gel permeation column chromatography for protein separations.

The surface adsorption model was discussed relative to the nature of the mobile and stationary phases in ion exchange column chromatography for two distinct cases: with and without pore diffusion. For large solute molecules, …

Effects Of N>M Clos Networks On Edge Coloring And Matrix Decomposition Algorithms, Ming-Hsing Lin

Theses

Considered in this thesis are n > m Clos networks on edge coloring and matrix decomposition algorithms. This work uses a two-fold approach to examine the effects of n > m Clos networks on edge coloring and matrix decomposition algorithms. First, edge coloring and matching on bipartite multigraphs are applied to routing on Clos networks. It is demonstrated that edge coloring algorithms which find a minimum edge coloring set up the routing for n > m Clos networks with redundancy. The results presented here indicate that the Euler coloring algorithm has applications on n > m Clos networks because it has fast time complexity …

A Comparison Of The Fracture Toughness, Hardness, Impact Strength, And Thermal Expansion Of Two Dental Porcelains, Nancy Maignon

Theses

Dental Porcelains are known to be very brittle materials. Ongoing research is being undertaken to obtain a porcelain of optimum strength. A recent development in this field is the new porcelain Optec HSP.

In this comparative study, a series of mechanical test were performed on both Optec HSP and Ceramco II.

An indentation technique was used to calculate the hardness and fracture toughness, the Izod method with a 1 ft-lb pendulum was used to obtain the impact strength, and the thermal expansion was calculated with the Dupont thermal analyser.

For each material, a sample size of five and twenty specimens …

Protocol Processing Delay Analysis On Ethernet By Simulation Of Njit Ethernet, Jagdish Gangrimal Rangwani

Theses

CSMA/CD based Local Area Networks account for about 75% of the installed LAN base today. As these networks are becoming available for high channel bandwidth, it is important to identify the bottlenecks in these networks. As channels are becoming high speed, bottleneck is shifting from channel to protocol processing. This delay depends on a particular implementation of the protocol and not the protocol standard itself.

This Thesis presents the analysis of delay on Ethernet. To achieve realistic results NJIT Ethernet, as it is configured, is modelled and simulated. Traffic on this network is measured and load on each segment is …

A Cad For Edif Pattern Generation, Mohammad Akram Khan

Theses

Generating a set of test vector for a digital circuit is the most critical step in design and test. It is very important to generate test sequence easily and efficiently. The importance is enhanced by the fact that the simulation database is being used to create test programs. A CAD tool ATPG (Automatic Test Pattern Generator) has been developed to specify and satisfy requirements of designers and test engineers. EDIF (Electronic Design Interchange Format) is followed closely. EDIF targets compatability among foundry services and CAD/CAE systems.

Semiconductor Pressure Sensor And Amplifier With Extended Temperature Range, Abhay Mahadeo Joshi

Theses

In this thesis work, a unique raicrosensor was designed for pressure measurements over the temperature range of -80 C to 125 C. The sensor has CMOS circuitry powered by a single voltage supply. It can be used for military and space applications including monitoring the pressure acting on the nose of the space shuttle.

The sensor consists of a thin silicon diaphragm, which is stressed by external pressure. Four resistors in a Wheatstone bridge configuration are diffused into the diaphragm. The temperature drift in the silicon sensors is dominated by the temperature dependence of the piezoresistive coefficients. The resistors are …

Optimization Of Throughput And Stability For Csma/Cd Channel, Liangshyng Jou

Theses

Multiple access technologies plays an important role in designing distributed computer communication system. Here, CSMA/CD has attracted researchers' attentions in the last ten years. In this paper, based on attributions of the slotted, nonpersistent CSMA/CD system, performance of CSMA/CD channel is analyzed. Adaptive Retransmission Technique is adopted to obtain the maximum throughput. Also, equilibrium contours are derived to discuss the stability of the system. And use FET to measure the stability of CSMA/CD channel that FET gives an approximate measure of the average uptime of an unstable channel.

Optimal Algorithmic Testing Of Re-Programmable Logic Arrays, Arvind Chopra

Theses

This research delineates a test strategy and detailed sequence of test vectors for a new class of programmable logic devices (PLDs). This new class of devices is based on architectures that contain programmable logic arrays (PLAs) programmed by on chip integrated static RAMs or EEPROMS. The new PLD architecture poses unique testing problems which require 100% nodal test coverage. Previous PLAs/PLDs did not require that 100% of the nodes be tested since their circuits utilized fuse link crosspoints and were not dynamically reprogrammable. Such devices could be tested by a unique personality pattern that combined the application and the test …

Design Of Robotic Lan Controller And Map Interface, Jayesh M. Joshi

Theses

An application specific integrated circuit has been designed for use as a gateway between two local area networks. This silicon chip provides the gateway function to link the NJIT robotics network and the MAP IEEE-standardized network. This IC utilizes the available Motorola MC 68824 Token Bus Controller for the MAP data path. A special IO design compatible with an optical communication link is used to interface into the NJIT RLAN network.

The gateway IC serves as an asynchronous buffer between the 5Mbps MAP link and the 500 bps local optical link. The control protocol provides the master function for polling …

Biodegradation Of Benzene And A Btx Mixture Using Immobilized Activated Sludge, Mayur Padamshi Lodaya

Dissertations

Aerobic biodegradation of benzene was studied using activated sludge immobilized in calcium alginate (immobilization by entrapment), and also attached to a silica based catalyst.support (immobilization by attachment). Hydrogen peroxide was used as a source of dissolved oxygen to eliminate physical removal of benzene due to aeration. Abiotic losses of benzene were accounted for.

A recirculation reactor, run in both batch and continuous feed mode, was used to determine the kinetic parameters. The system response was examined by tollowing changes in benzene concentration, flow rate, and biomass loading. The system was modeled mathematically and the kinetic parameters were determined.

Biological removal …

Bond And Fatigue Characteristics Of High-Strength Cement-Based Composites, Somboon Chimaphant

Dissertations

The results of a series of tests on a variety of high strength cementitious composites yield a model from which an empirical equation of general normalized pull-out stress vs. pull-out displacement relationship is developed. A new variable named the "Brittleness Index" is defined and used in the proposed equation. Additionally, the concept of maximum strain is used to predict the fatigue life of high strength concrete.

Three sizes of deformed bars and two types of steel fibers with four different volume fractions were used to observe bond-slip and pull-out characteristics of high strength concrete. The results indicate that the maximum …

Kinematic Synthesis Of Mechanisms For Multiply Separated Positions, Hyoung Jun Kim

Dissertations

The rigid body motion is studied in a combination of finitely and infinitesimally separated positions in planar, spherical, and spatial kinematics. A general new method for determining the locations of points and/or lines in a rigid body moving through finitely and infinitesimally separated positions is developed. These points and/or lines would satisfy the constraints of various types of binary links for planar, spherical, and spatial mechanisms.

A unified form of circle-point curve equation is derived for finitely and multiply separated position problems in planar and spherical motions. A graphical method to construct the circle-point and center-point curves and Ball point …

Anaerobic Biodegradation Of Trichloroethylene With The Addition Of Sugar Using Activated Carbon-Fluidized Beds, Suxan Huang

Dissertations

Anaerobic biodegradation of trichloroethylene (TCE) was carried out in a two-stage granular activated carbon fluidized bed bioreactor. The intermediate products were identified as: dichloroethylene (DCE), vinyl chloride (VC), 1,2-dichloroethane (DCA) and chloroethane (CA). Of the three geometric isomers of DCE, the trans-1,2 dichloroethylene (TDCE) was found to be the most predominant species, The production of DCA suggested a diverted reaction sequence from the conventional sequential reductive dechlorination pathway postulated in the past literature. CA was believed to be a product of VC and/or DCA. The co-substrate glucose was implicated for this reaction specificity. Based on our data and on other's …

Fault-Tolerant Interconnection Networks For Multiprocessor Systems, Hamed Mohamed Nassar

Dissertations

Interconnection networks represent the backbone of multiprocessor systems. A failure in the network, therefore, could seriously degrade the system performance. For this reason, fault tolerance has been regarded as a major consideration in interconnection network design. This thesis presents two novel techniques to provide fault tolerance capabilities to three major networks: the Baseline network, the Benes network and the Clos network.

First, the Simple Fault Tolerance Technique (SFT) is presented. The SFT technique is in fact the result of merging two widely known interconnection mechanisms: a normal interconnection network and a shared bus. This technique is most suitable for networks …

Air Stripping Of Volatile Organic Contaminants Using Rotating Disc Contactor, Kai-Ping Hsueh

Dissertations

Previous studies have suggested that the transfer of VOCs to the atmosphere by air stripping may be a convenient and potentially cost-effective method to remove these compounds from the water. A Rotating Disk Contactor (RDC), similarly to other aeration devices, can provide intimate contact between the VOC-bearing water and air. It is believed that under carefully selected operating conditions, the RDC system are more competitive with packed tower than other aeration methods. The objectives of this study were to evaluate the feasibility of using the RDC to strip VOCs from the contaminated water and to develop a mathematical model to …