Engineering Commons^™

Direct Schottky Injection Image Sensors, Subramanyam V. Ayyagari

Theses

This thesis describes the analysis and simulations of Direct Schottky Injection (DSI) imagers which have 100% fill factor. Frame transfer (FT) and interline transfer (IT) DSI imager structures have been investigated. Theoretical Poisson solution for the PT and P-NP FT-DSI structures is presented, which closely agrees with simulation results. Simulation for frame transfer FT-DSI imagers has been done in SUPREM III since 1-D effects are more dominant. Single carrier transit time for both the structures were estimated from the electric fields.

Simulations of IT-DSI structures was done using PISCES llb, to get the local electric fields, which define the directionality …

Multiresolution Techniques : Laplacian Pyramid Coding And Its Comparison With Subband Coding, Danmei Chang

Theses

The multiresolution pyramid and related structures have been developed as intermediate representations between the purely frequency domain and purely spatial domain. In this thesis. we discuss two important pyramid structures which are often used in multiresolution representation: Laplacian pyramid and subband coding.

Laplacian pyramid. a typical pyramid structure, is studied in detail. By means of software implementation. we obtain a comprehensive understanding of its features and applications in image representation and data compression. Several modifications of pyramid structure are used to compress the data dynamic range, reduce the computational complexity and improve performance. Performance of the conventional Laplacian pyramid and …

Centrifugal Modeling Of Leaking Underground Storage Tanks, Kuo-Neng George Chang

Theses

There are between 2 to 3.5 million Underground Storage Tanks (UST) located through this nation. Most of these tanks store gasoline and fuel oil. Many tanks in fact are or will soon be leaking, thus making them one of the major sources of groundwater contamination in USA. The fate and transport of chemicals from the leaking USTs is estimated from mathematical models. A major difficulty in these modeling efforts has been a crucial lack of information concerning the constitutive relationships governing multiphase contaminant movement.

Centrifugal modeling is an alternative to mathematical modeling, which may give an insight to the problem …

Fast Packet Switching For B-Isdn With Neural Net Control, Ajit K. Chaudhuri

Theses

The concept of integrated network where both the voice packet and data packet are delt with, started taking shape since 1970. Later, Users? demand for communication of data, voice, file, facsimile, image, videotext, videophone, videomovie has also been felt. All these services need bit rate of transmission in the order of 10, even 100 Mbits. An economical way to transmit this higher bit rate, with flexibility of bandwidth, is to treat voice/video in the form of packets and transmit those packets in real time. Studies of this kind of communication is carried out in Broadband ISDN ( BISDN). At this …

A Machine Vision System With Remote Host, Chieyeon Jason Chen

Theses

The modem plays an important role in data communication using the Public Swiched Telephone Network. In this thesis, the modem function is merged into a low cost machine vision system based on the Motorola 68HC11. Evalation Board The system comprises the intelligent machine vision con- troller and a remotely located host computer, such as an IBM-PC. It, supports extra long distance communication capability so that the controller and the host can be anywhere in the world where then is a telephone line. Because of the limit of a 2100 bps modem, soft ware data compression is implemented here to save …

Artificial Dielectric Polymeric Optical Waveguides, Peng Chen

Theses

Wave propagation in artificial dielectric polymeric optical thin film waveguides is studied. These artificial dielectric films are made of multiple layers either metallic or semiconductor clusters in polymeric matrix. The waveguides are fabricated using the plasma polymerization and vacuumm evaporation deposition method. By analyzing results of these kinds of structures, some important conclusions can be obtained. The artificial dielectric layer in the waveguide center effectively changes the modal distribution in the waveguides. In the case of semiconductor layer, an all optical switch may be realized.

A Multimode Index Detecting Sensor For Use In Plastic Concrete, Qiyu Chen

Theses

This thesis describes a microcomputer-based measuring system using a laser diode source, a fiber optic sensor and a microcomputer DMA interface to test and analyze the entrained percentage of air in concrete.

The principle of refraction and reflection of light in optical fibers is applied to detection of air bubbles. Reflected light intensity signals are detected and transferred through a DMA interface to a laptop computer. Analysis of reflected light intensity produces a measurement of the air content of fresh concrete. Accuracy of the system is evaluated through extensive laboratory and field trials.

Some Aspects Of Integration Of Classification, Computer Aided Design, Process Planning, And Scheduling Of Flexible Manufacturing Systems, Suresh Godavari

Theses

This work deals with the role, problems and solution technique for integration of Computer Assisted Design, Classification, Process Planning, and Scheduling for a Flexible Manufacturing System. A lark spectrum of rotational and prismatic parts are considered.

A Knowledge-based rough classification and coding system [C&C] has been developed for coding similar parts using a Group Technology [GT] technique. In this module VP-EXPERT and DBase III Plus are used as expert system and database respectively. This module interfaces with a database for the retrieval and selection process.

The code obtained from the C&C system is the basis for the succeeding phases. The …

Dual Token Ring Lan Performance, Pratap S. Pasupuleti

Theses

A simulation model to analyze the performance of a dual token ring LAN is developed. The performance measures throughput, average packet delay and maximum delay per packet are obtained. System performance is analyzed for different loads, number of stations, and packet lengths. The performances of token ring LANs with a conventional structure and a dual ring structure are compared for both uniform packet sizes and a case with mixed packet sizes. In the uniform packet size case, the dual ring delays were lower at equivalent throughput because of propagation delay effects. In the mixed packet size case the maximum delays …

Design, Fabrication, And Testing Of Temperature Compensated Magfet, Dilip K. Sampath

Theses

A simple model based on dc behaviour of MOS transistors operating in weak inversion is derived on the basis of previous publications. The bipolar like source to drain transfer characteristics of MOS transistor in weak inversion was used to implement a voltage source that is proportional to absolute temperature (PTAT); a cell that can be stacked to obtain the desired voltage. A CMOS temperature compensated current reference is implemented using PTAT cell with MOSFET as current defining element. A CMOS magnetic field sensor has been developed. The sensitivity of sensor is dependant on the bias current; incorporation of temperature independent …

An Efficient Annealing Algorithm For Global Optimization In Boltzmann Machines, Rajendra Sarasakrishna

Theses

This thesis proposes a new annealing algorithm for Boltzmann Machines. This algorithm uses an Exponential Formula for temperature scheduling that produces remarkably better solutions for global optimization. The superiority of the new algorithm is shown by computer simulations of several examples on Boltzmann Machine and its variants. This is also shown to have better properties than algorithms like Generalized Simulated Annealing which possess somewhat similar dynamics.

Experimental Study Of The Internal Loads In A Cardan Joint, Johannes K. Waal De

Theses

A recent investigation by Fischer and Freudenstein questioned the validity of the negligible axial forces assumption in the static force analysis of Cardan Joints. The purpose of this paper is to experimentally assess this assumption for the dynamic case.

To this end an experiment was constructed to determine the axial forces acting on the intermediate revolute joints of a Cardan joint. A four-square test arrangement was prepared such that shaft intersection angle, shaft torque, and shaft speed could be varied. Strain gages were applied to the "arms" of the joint to measure the resulting strains due to the forces along …

Efficient Multiprocessor Scheduling By Mean Field Theory Neural Networks, Pei-Ken Yi

Theses

In this thesis, we develop an optimization method based on Mean Field Theory (MFT) Neural Networks to solve the Task Scheduling problem. The MFT algorithm combines characteristics of the Simulated Annealing (SA) algorithm and the Hopfield neural network. MFT exhibits rapid convergence and at the same time it preserves the solution quality afforded by SA. Since MFT has been successfully used to solve the Traveling Salesman Problem (TSP), a new modification to MFT is also presented which supports Task Scheduling problem. The temperature behavior of MFT during Task Scheduling is approximately analyzed and shown to possess a critical temperature (71,) …

Deposition Of Particles In A Channel With Gravity And Image Forces, Jing-Shiun Lai

Theses

Deposition of particles in a parallel-plate channel under the influence of inertia, fluid viscosity, gravity and image forces was studied using trajectory method.

A laminar fluid flow of uniform and parabolic (or fully-developed) velocity profiles is assumed and the fluid is suspended with particles having the same velocity as the fluid at the inlet plane. The particles flowing into a horizontal parallel-plate channel have no initial velocity in the vertical direction. The influence of gravity force and image force produces a vertical motion which results in deposition of particles on the channel walls.

A trajectory method was employed to find …

Uniformity Correction For Infrared Ir-Ccd Camera, Chien-Ming Leng

Theses

This thesis describes the results of a study of three types of uniformity correction schemes for an infrared camera. More specifically, a Datacube Image System was used to simulate the three uniformity correction schemes for a 320x244-element IR-CCD TV camera with PtSi Schottky-barrier detectors. The three uniformity correction schemes are: one-point uniformity correction with single background, one-point uniformity correction with multibackground and two-point uniformity correction. Datacube programs were developed for the three above uniformity correction schemes and some experimental results were obtained.

On The Estimation Of New Life Model Of Transformer Insulation Material Under Combined Electrical And Thermal Stress, Chiming Lin

Theses

Results of combined electrical and thermal aging and only thermal aging studies conducted on a 'fish' paper insulation material are presented in this thesis.

The model for aging has been proposed which is essentially the Arrhenius equation with a weighted factor {exp -cg/kT1 to describe the enhanced reaction rate process under combined thermal and electrical stress. A procedure has been described for evaluation of parameters of this new model.

It is seen that life estimates obtained with this model are close enough to the experimental results.

In addition, reliability data were also generated on the same material using electrical noise. …

The Bandwidth Allocation Of Atm Through Genetic Algorithm, Hong Pan

Theses

In this thesis, we develop an optimization method based on Genetic Algorithm to achieve the bandwidth allocation of ATM network. In Broadband Integrated Service Digital Network (BISDN), the Asynchronous Transfer Model (ATM) is already adopted as the transfer standard by CCITT. ATM is a high-bandwidth, low-delay, fast-packet switching and multiplexing technique. Using ATM technique, we can flexibly reconfigure the network and reassign the bandwidth to meet the requirement of all types of services. As an effective optimization method, Genetic Algorithm(GA) is applied to implement the bandwidth allocation of ATM. GA is a class of search algorithm based on the mechanics …

Hot : A Timing Optimizer For Hierarchical Vlsi Circuits Using The Charge Conservation Delay Model, Yumei Quan

Theses

The primary benefits of VLSI chips are their high speed, small area, and lower power. These performance attributes are dependent on the quality of chip design. As a result, performance can be optimized by proper design decisions. One of the decisions in chip design is the selection of gate delays and/or transistor sizes (channel width of an MOS transistor).

To optimize the performance of VLSI chips, transistor delay models and optimization algorithms are very important since accurate analytical models for signal delay are essential to replace expensive device level simulation and the high efficient algorithms assist designers in developing high …

Integrated Digital Speech System With Pc, Zhen Zhu

Theses

A PC-based real-time digital speech processing system is designed. Speech synthesis, analysis, storage and retrieval are implemented in the system with intelligent telephone functions. Speech data are stored on floppy disk and easy to retrieve. Though floppy disk is slow in speed, real-time processing is achieved with low bit rate coding. The computer gets speech data from a digital speech processing unit or send data to it through a synchronous seiial communication port. The analog input of digital speech processing unit can be selected from the telephone line or the microphone, and output of the digital speech processing unit can …

Decomposing Non-Product Form Queueing Lattices Through Autorouting With A* Algorithm, Chun-Chang Yu

Theses

Direct solution techniques are expensive for the state transition lattice of a class of non-product form queuing modes. In this thesis, Autorouting with A* algorithm is adapted to decompose it as solvable subsets which can be solved sequentially and independently. Autorouting with A* algorithm is heuristics in problem solving. It also is one of a class of global optimization problems that are difficult to solve. Some queuing modes of type A will be decomposed in this thesis through Autorouting with A* algorithm.

On Local Stresses And Spring Constants Of Pipe-Nozzle Connection, Hson-Chih Sun

Dissertations

This thesis presents a comprehensive study of local stresses and spring coefficients of pipe with a nozzle connection, analyzed by the finite element method (FEM). Six types of loading are discussed: radial force, circumferential moment, longitudinal moment, circumferential shear force, longitudinal shear force, and torsional moment.

For the local stresses, the bending and membrane stress factors due to each of these loadings are presented in a series of plots with various gamma (piping radius/thick-ness) and beta (nozzle radius/pipe radius) values. These stress factors will readily replace those previously published in WRC No. 107. This work not only gives more accurate …

Adaptive Stack Filtering By Lms And Perceptron Learning, Yu-Chou Huang

Theses

Stack filters are a class of sliding?window nonlinear digital filters that possess the weak superposition property(threshold decomposition) and the ordering property known as the stacking property. They have been demonstrated to be robust in suppressing noise. Two methods are introduced in this thesis to adaptively configure a stack filter. One is by employing the Least Mean Square(LMS) algorithm and the other is based on Perceptron learning.

Experimental results are presented to demonstrate the effectiveness of our methods to noise suppression.

Molecular Modeling Studies Of Anatoxin Agonist Analogues, Qizhan Yao

Theses

Thirty two anatoxin agonist analogues were investigated by means of computerassisted molecular modeling studies to delinate factors that may contribute to potency. The structures were generated from the fragment libraries from the SYBYL program, and minimized by the MM2 program. Then a systematic conformational search was done based on the global minimized structures to get bioactive conformations.

Ten agonists were further studied after the conformation optimization. The most potent agonists among these analogues, (+)-anatoxin-a (11), about 300 times as potent as carbamylcholine, severed as a template for the rest to examine the superimposability of the hydrogen bonding acceptor site and …

A Study Of Machining Parameters To Optimize Surface Finish In Metal Cutting Through Cnc, S. Waseem H. Zaidi

Theses

The purpose of this thesis is to find the relationship between surface finish and machining parameters. A series of experiments have been performed at shop floor of NJIT, on MAZAK(CNC turning center), using two different cutting tool materials(high speed steel and cemented carbide) and a workpiece of Aluminium. The results have been then evaluated and analyzed to see the effects of various combinations of cutting conditions, that is, feed, speed, and depth of cut. Recommendations have been made on the basis of analysis to estimate the minimum and maximum values of surface roughness with respect to the cutting conditions for …

An Investigation Of Optoelectronic Integrated Circuit Receiver, Dinar S. Gupte

Theses

This thesis report presents an investigation of an OptoElectronic Integrated receiver Circuit (OEIC). An OEIC on Silicon (Si) substrate is analyzed and simulated as part of this investigation. The OEIC is based on GaAs technology. The advantages of this are its compactness, high speed, low noise and high reliability in light wave communication systems. A higher output signal is required to make such devices suitable for practical applications. This is achieved by the use of a cascode stage. The fabrication techniques of the relevant semiconductor devices have also been discussed.

In light wave communication systems, the region of minimum losses …

Analysis Of Field Distribution Of A Dielectric Resonator And Its Applications, Manohar R. Kamath

Theses

Dielectric resonators (DR) are suitably shaped objects made of high dielectric constant materials like TiO₂, BaO, ZnO, and accessory ingredients, which can function as electrical resonators covering a very wide frequency range upto 40GHz. The physical dimensions of dielectric resonators are in mm range. High dielectric constant material resonators seem to be ideally suited for microwave applications because of their miniature size, low loss, insensitivity to magnetic dc biasing fields, and ability to concentrate large RF magnetic fields in small volumes. However temperature stabilization of dielectric resonators is an important consideration as the center frequency is a function …

Performance Evaluation Of Extended Token Ring Network Under Message Priorities, Prakash B. Kukadia

Theses

Local Area Networks carrying multiple priority classes of messages have received considerable attention recently. A simulation model of a symmetric, priority based network, consisting of token ring networks interconnected by a bridge is implemented. Messages are divided into two priority classes, namely, high priority classes and low priority classes. Two different approaches are considered for transmission of high priority messages. [1] Each station transmits the same amount of high priority traffic when the token reaches the station, regardless of the time elapsed from previous token arrival. [2] The amount of high priority traffic transmitted by each station may vary at …

An Integrated Circuit X-Ray Sensing Array Based On A Cmos Flip-Flop Cell, Huan-Chung Lee

Theses

A novel X-ray sensor IC has beeli designed which counts individual photons at rates up to 5,000,000 counts per second. A two-dimensional X-ray flip-flop sensor array, consisting of an 30 x 30 matrix of CMOS flip-flop sensors integrated in one chip together with an internal clock generator and access selection circuitry is described. A flip-flop sensing cell contains cross-coupled CMOS devices, one of which is connected to a large-area reverse-biased diode. A large area diode exposed to X-ray flux triggers the flip-flop. By reading out the final stable state of the flip-flop, the absence or presence of an X-ray photon …

Electromagnetic Transients Program Interfacing, Enhancement And Comparison With Spice, Siswa Trihadi

Theses

The Electromagnetic Transients Program (EMTP) is a computer program used to simulate high speed power system transients. The EMTP input data structures and the rules in setting up the input data file are described in this thesis by means of two sample cases i.e an RLC series circuit and a sin le line to ground fault in power system.

The EMTP input data are very detailed an highly-structured column-dependent. To improve the user-friendliness of EMTP by ignoring the difficulty of arranging the column structures, this thesis presents the EM P User Interactive Program. Sample cases using this interactive program are …

Simulation Study Of Monolithic 8-12 Micron Gaas/Algaas Multiple Quantum Well Infrared Image Sensor, Ye Zhu

Theses

The design of a monolithic 8-12 micron GaAs/AlGaAs multiple quantum well infrared image sensor has been tested by computer simulation using PISCES-IIB and SPICE3B.1 software packages. The device structure is in the form of a monolithic GaAs/AlGaAs multiple quantum well (MQW) photoconductor integrated with a GaAs MESFET readout circuit. The readout MESFET's are located in the top layer of the MQW so that a relatively standard GaAs MESFET design and processing technology can be used. The theoretical feasibility of such a vertically integrated structure and the processing compatibility of GaAs/AlGaAs MQW and GaAs MESFET's were investigated in this work.

Our …