Engineering Commons^™

Biodegradation Of Naphthalene Using Pseudomonas Putida (Atcc 17484) In Batch And Chemostat Reactors, Jay Boyd Best

Theses

Kinetic experiments were conducted using Pseudomonas putida (ATCC 17484) to determine the rate of growth when naphthalene was provided as a sole carbon source in suspended biomass systems. Batch and chemostat reactors were used under three sets of conditions: non-aerated, aerated at 29.5° C, and aerated at 25.5° C. A number of concentrations were tested under each set of conditions. Data regression was used to determine parameters for Monod (non-inhibitory), Andrews (inhibitory), and zero-order kinetics. Although the Andrews fit of the data provided a slightly lower sum-of-squares error (SSE), the amount of data scatter and the weak inhibition made the …

Microstrip Zero-Sum Antenna; Cad And Experimental Study, Tuan H. Lam

Theses

A microstrip antenna array consisting of two elements combined with a stripline hybrid (rat-race) ring coupler is used to implement a zero-sum antenna. Numerical optimization of individual antenna elements in terms of feed location and patch size was achieved using IE3D (Zeland Software Inc., Fremont, CA), a fullwave 3-D planar electromagnetic simulation software. Further, design of a hybrid (rat-race) ring coupler in a stripline environment was carried out, yielding the sum and difference functions as 0.5 dB and 40 dB, respectively. A combination of a two-element antenna array and a hybrid (rat-race) ring coupler as a zero sum antenna has …

Soot Capture In An Electrocatalytic Reactor, Thana Slanvetpan

Theses

A major problem with many soot emission control devices is the fact that they quickly become loaded with soot which must be removed by a regeneration process. A soot capture reactor using a large flow channel was studied in order to eliminate channel plugging and avoid regeneration. Electrostatic precipitation was used in order to enhance particle diffusion to the catalyst wall of the reactor tube. The system effectiveness for soot capture was measured with filter paper sampling of the incoming versus the outgoing flow through the reactor. Soot filter loadings were analyzed by laser optical transmission. From the soot filter …

Determination Of Effects Of Stress On Polymeric Ankle-Foot Due To Weight Change: Experimental Stress Analysis, Lin Yu Wang

Theses

Ankle-Foot Orthoses (AFOs) are devices that assist patients who sustained an abnormal motion at the ankle joint of the foot due to traumatic injury and stroke, etc. The objective of this project is to determine the stress patterns in AFOs under different loading conditions such as weights and genders. Thus, the location of failure can be predicted, and a redesign process can be developed. Furthermore, those experimental results will be used to verify the results obtained from the previous Finite Element Analysis (FEA) ^[11,10]. Results from the experiment showed a significant stress change due to load change. This stress …

Development Of Aqueous Scrubber To Oxidize And Absorb Nitric Oxide, Wanna Lolertpiphop

Theses

The use of sodium chlorite (NaClO₂) and alkaline aqueous cumene hydroperoxide (CHP) as oxidizing agents to promote the absorption of nitric oxide from flue gases was investigated in a semicontinuous bubbling scrubber. The efficiency of the scrubbing solutions to remove nitric oxide was evaluated as a function of operating conditions such as pH, concentration of the oxidants, residence time, temperature, flue gas compositions.

Under acid conditions, sodium chlorite can stoichiometrically react and absorb 99.5% NO and 80% SO₂ in the same scrubber with 0,672 M NaClO₂ in buffered solution at pH 6, and 0.3 M NaOH. …

Computational Determination Of Laminar Flow Loss Coefficients In 90° Channel Bend, Leonard Paul Parkin

Theses

Loss coefficients for laminar two dimensional incompressible channel (or duct) flow in a 90° bend are investigated using FEM software, FIDAP. This problem consists of a two dimensional duct with a 90° bend of constant radius flowing with water, at 70°F and atmositeno conditions. The bend radius to duct width ratios examined were 1.5 and 1.0. Both bend radius to duct width ratios were analyzed for Reynolds Number ranging from 50 to 1800. The pressure and velocity distributions were found and used to determine the pressure due to the bend. The results show the pressure loss effect due to the …

Modeling Of Deformed Swept Volumes With Sde And Its Applications To Nc Simulation And Verification, Feng Lu

Theses

Representation of swept volumes has important applications in NC simulation and verification as well as robot-motion planning. Most research on .the representation of swept volumes has been limited to rigid objects. In this study, a sweep deferential equation (SDE) approach is presented for the representation of deformed swept volumes generated by flexible objects.

The deformed swept volume analysis is integrated with machining physics to account for tool deformation/deflection for the NC simulation. End milling is modeled and analyzed and the tool deformations are calculated and integrated with the SDE program. A program is developed in C++ for the generation of …

Multi-Lifecycle Assessment Of Cathode Ray Tubes, Devendra Jayant Badwe

Theses

Over the past few years environmental issues and concerns have become more and more important, as they become a common part of most people's personal experience. In these regards, the electronics industry is facing substantial problems in terms of end-of-life management of its products, televisions and monitors in particular. The building blocks of this industry are usually viewed as relatively "clean". However, manufacturing by-products of the electronics industry and the disposition of electronics are becoming increasingly important technical, financial, and environmental issues.

Within the context of the above issues, environmentally responsible disposal of Cathode Ray Tubes (CRT's), which is still …

Synthesis And Characterization Of Phosphosilicate Glass Films By Lpcvd For Sensor Application, Hui Wu

Theses

This study was dedicated to the synthesis of the thin film materials required to fabricate the waveguide and the reference arm barrier for integrated optical sensor. Phosphosilicate glass (PSG) thin films were synthesized on silicon and quartz wafers by LPCVD using Ditertiarybutylsilane(DTBS), Trimethylphosphite(TMP) and oxygen as precursors. The films were processed at different temperatures between 600°C and 700°C at a constant pressure, and at different flow rate of TMP.

The effect of TMP flow rate and deposition temperature on deposition parameters and the properties of PSG films were investigated. The films deposited were uniform, amorphous, low stress and the composition …

Using Heart Variability To Measure The Effects Of Manual Medicine On Autonomic Activity, Michael Zullow

Theses

A pilot study was performed to test the theory that manual medicine techniques known as the CV4 (compression of fourth cerebral ventricle) maneuver and a sacral hold/iliac bridge hold combination increase parasympathetic activity. Manual medicine techniques are widely practiced by Doctors of Osteopathy and Chiropractors to treat physical and mental health problems. Those who have received manual therapy have reported to experience less pain, better mobility, and a greater feeling of relaxation. To help us learn about the effects of manual therapy, autonomic activity was measured scientifically rather than subjectively in this study by monitoring respiration rate and heart rate, …

Design, Simulation, Fabrication And Testing Of Microprobes For A New Mems Wafer Probe Card, Yanwei Zhang

Dissertations

A new type of MEMS cantilever wafer probe card consists of an array of microcantilevers individually actuated by bimorph heating to make contact with the test chip was designed and fabricated. This probe card is called the CHIPP (Conformable, High-Pin count, Programmable ) card and can be designed to contact up to 800 I/O pads along the perimeter of a 1 cm² chip with a microprobe repeat distance of ~50 µm. Each microcantilever had an internal heater and a separate electrode carrying the signal under test and contained four separate layers plus a fifth material for the contact tip …

Design Fabrication And Characterization Of High Performance In Gaas/Inp Focal Plane Array In The 1-2.6 Μm Wavelength Region, Krishna R. Linga

Dissertations

This research thesis describes a new In_xGa_1-xAs/InA_ysP_1-y/InP technology for long wavelength photodetectors and photodetector arrays. A unique and novel detector structure was designed and fabricated using Hydride Vapor Phase Epitaxy, for low leakage current photodetector arrays in the 1-2.6 µm wavelength region. Potential applications of InGaAs focal plane arrays include near-infrared spectroscopy, fluorescence, remote sensing, environmental sensing, space and astronomical applications. The unique design concepts included the step grading of InAsP layers, lower lattice mismatch between the two InAsP graded layers, lattice matched InAsP cap layer and InGaAs absorption layer, sulphur doping …

The Design And Fabrication Of A Thermal Microprobe Integrated On An Atomic Force Microscope Probe Tip, Yongxia Zhang

Dissertations

A thermal microprobe has been designed and built for high resolution temperature sensing. The thermal microprobe consists of a very-thin-film thermocouple junction confined to the very end of a low mass Atomic Force Microscope (AFM) probe tip. Essential to high resolution temperature sensing is the confinement of the thermocouple junction to a short distance at the AFM tip. This confinement is achieved by controlled photoresist coating.

Experimental prototypes have been made with the junction confined to within 0.3 µm of the tip. The couple is made of Au/Pd, and the two metals are electrically separated elsewhere by a thin insulating …

Distribution Of Velocities And Velocity Gradients In Mixing And Flocculation Vessels : Comparison Between Ldv Data And Cfd Predictions, Changgen Luo

Dissertations

Flocculation is an operation of significant industrial relevance commonly encountered in many processes, including water and wastewater treatment. The physico-chemical phenomena of this process is strongly affected by the magnitude of the velocity gradients generated, typically through agitation, in rapid mix devices and flocculation vessels.

In this work the fluid dynamic characteristics of mechanically agitated systems, namely three different types of stirred tanks, which can be used as flocculation vessels, were studied. Both the mean and fluctuating velocities in all three directions were measured by using a Laser-Doppler Velocimeter (LDV). The velocity distribution, fluctuating velocities, power consumption and local velocity …

Adaptive Space-Time Processing For Digital Mobile Radio Communication Systems, Amit Shah

Dissertations

The performance of digital mobile radio communication systems is primarily limited by cochannel interference and multipath fading. Antenna arrays, with optimum combining (OC), have been shown to combat multipath fading of the desired signal and are capable of reducing the power of interfering signals at the receiver through spatial filtering. With OC, the signals received by several antenna elements are weighted and combined to maximize the output signal-to-interference-plus-noise ratio (SLNR). We derive new closed-form expressions for (1) the probability density function (PDF) of the SINR at the output of the optimum combiner, (2) the average probability of bit error rate …

Multi-Wavelength Pyrometric Systems For Emissivity-Independent Non-Contact Temperature Sensing, Michael B. Kaplinsky

Dissertations

A Multi-Wavelength Imaging Pyrometer (M-WIP) for real-time remote sensing of temperature profiles of targets with unknown emissivity was developed and demonstrated. To measure the spectral radiance of a target at several distinct wavelengths an M-WIP system was implemented based on an 320x122-element PtSi IR-CCD imager with an assembly of 7 narrow-band 1k filters in the range from 1790nm to 4536nm. A real-time algorithm for simultaneous estimation of the temperature and model parameters of the target emissivity from the least-squares fit of the theoretical model of 1k camera output signal to the experimental spectral measurements was developed and implemented. This rea1-time …

Development Of A Mathematical Model Of Gait Dynamics, Tae Ho Choi

Dissertations

There exists hypothesis that gait selection is strongly correlated with mechanical energy efficiency in normal subjects. The hypothesis is experimentally proven, and intuitively taken for granted. However, it is not mathematically proven that the minimum energy consumption hypothesis is the underlying principle for the normal human gait. To prove the hypothesis we have developed a mathematical model of human walking, in which it is possible to predict an optimal gait at any given speed of walking based on the principle of minimum mechanical energy consumption.

This improved model, which includes the double-support phase of walking as well as the swing …

Particle Deposition From Turbulent Flow In A Divergent Channel, Wai-Ting Huang

Dissertations

This dissertation presents a numerical analysis of particle deposition from a dilute gas-solid two-phase suspension in a divergent channel. The Lagrangian governing equations for particle motion include inertia force, viscous force, gravity force and image force from electrostatic charge on the particle. The incompressible two-dimensional turbulent flow field in a divergent channel is solved by employing a Κ-ε modeling technique with FIDAP finite element CFD software. A computational procedure is developed to incorporate the flow field into numerical simulation of particle trajectories from which the fraction of deposition is determined. Several divergent channels (half divergent angles of 0°, 7.5°, 10° …

Scheduling In Assembly Type Job-Shops, Nutthapol Asadathorn

Dissertations

Assembly type job-shop scheduling is a generalization of the job-shop scheduling problem to include assembly operations. In the assembly type job-shops scheduling problem, there are n jobs which are to be processed on in workstations and each job has a due date. Each job visits one or more workstations in a predetermined route. The primary difference between this new problem and the classical job-shop problem is that two or more jobs can merge to foul' a new job at a specified workstation, that is job convergence is permitted. This feature cannot be modeled by existing job-shop techniques. In this dissertation, …

Motion Compensation And Very Low Bit Rate Video Coding, Shu Lin

Dissertations

Recently, many activities of the International Telecommunication Union (ITU) and the International Standard Organization (ISO) are leading to define new standards for very low bit-rate video coding, such as H.263 and MPEG-4 after successful applications of the international standards H.261 and MPEG-1/2 for video coding above 64kbps. However, at very low bit-rate the classic block matching based DCT video coding scheme suffers seriously from blocking artifacts which degrade the quality of reconstructed video frames considerably. To solve this problem, a new technique in which motion compensation is based on dense motion field is presented in this dissertation.

Four efficient new …

Performance Optimization Of Very High Frame Rate Ccd Burst-Image Sensors, Zeynep M. Pektas

Dissertations

The primary objective of this work was to demonstrate the feasibility of an image sensor that is capable of capturing images at 10⁷ frames per second. Such high frame rate operation is based on storage of a certain (N) number of frames into the BCCD memory registers and readout at a slower rate at the end of the frame collection period. To accommodate an optical frame time of 100ns, a high-speed virtual-gate photodetector with six multiple n-type implants was proposed and a novel design strategy was developed. The feasibility of this design was demonstrated by simulating the entire photodetector …

Modeling Of 3d Swept Volumes Using Sde/Sede Methods And Its Application To Five-Axis Nc Machining, Liping Wang

Dissertations

This research falls in two important areas in solid modeling and manufacturing automation: (1) swept-volume modeling; (2) computer-based NC (Numerically controled) machining simulation and verification. The swept volume is defined as the volume swept by an object undergoing an arbitrary motion. Modeling of 3D swept volumes includes the boundary computation and representation of a swept volume generated by a general object undergoing general motion in three dimensional space. The Sweep Differential Equation (SDE) and Sweep Envelope Differential Equation (SEDE) methods are two of the important swept volume modeling methods employed in this dissertation. They exploit differential equations to obtain the …

Membrane-Based Reactors For Ozonolysis Of Organic Pollutants In Aqueous And Gaseous Streams, Purushottam V. Shanbhag

Dissertations

Many gaseous and aqueous waste streams contain multiple organic pollutants at low concentration levels. It is not economical to recover and reuse these compounds; it would be advantageous to destroy them efficiently within the waste stream. This work employed ozone, a powerful oxidizing agent, in concert with a compact membrane-based phase-contacting device. Three types of membrane devices were studied: two of them (the single-phase membrane ozonator and the two-phase membrane ozonator) treated organic pollutants in wastewater, while the third (the integrated absorption-oxidation membrane ozonator) removed volatile organic compounds (VOCs) from a gaseous waste stream.

In the single-phase membrane ozonator, the …

The Fatigue Problems Of Cracks Subjected To Obliquely Incident Stress Waves, I-Chung Weng

Dissertations

Catastrophic failure of aircraft and other structures are often caused by undetected cracks. Fracture mechanics has been developed to augment traditional static and fatigue design. In the static theory of fracture mechanics, extensive treatment has been given to the stress distribution around sharp cracks and notches under various loading conditions. Previous works on the problems of dynamic loadings are not accurate in dealing with singularities at high frequencies. The numerical solutions become unrealistic at high frequencies in many practical applications.

To address the need to obtain the stress intensity factor in high frequency dynamic loading situations, we studied the use …

Analysis And Comparison Of Resistive, Ferroelectric And Pyroelectric Uncooled Bolometers For Electronic Imaging Systems, Mo-Huang Li

Theses

The performance parameters (responsivity (R_v). detectivity (D*), total noise and response time) of resistive, pyroelectric and ferroelectric bolometer detectors are dependent on a large number of key variables including chopping frequercy, the input impedance and voltage noise of the readout circuitry, the structure dependent parameters (particularly thermal conductance and thermal capacitance), and material properties such as dielectric constant, pyroelectric coefficient, loss tangent and thin film thickness. The interrelationship between the key variables and their influence on performance is often complex and not easily discerned for the three major types of thermal detectors: resistive, pyroelectric and ferroelectric bolometers.

In …

Analysis Of 320x240 Uncooled Microbolometer Focal Plane Array And Design Of Thermoelectric Cooler Controller, Takayoshi Fukaya

Theses

Uncooled microbolometer focal plane array is one of the promising method used in uncooled infrared imaging projects. The array's advantages over the conventional cooled imagers are its ability to operate without cryogenic cooler or dewar and its low cost. For the past several years, the ULTRA (Uncooled, Low cost, Technology Reinvestment Alliance) Consortium has been developing uncooled microbolometer imaging system.

This thesis investigates the technology behind the ULTRA camera system. The theoretical as well as the operation of the uncooled microbolometer focal plane array and the processing hardware and software is analyzed and explained.

Thermoelectric cooler controller for the microbolometer …

Growth Of Grass Shrimp, Palaemonetes Pugio, In A Contaminated And An Uncontaminated Site, Suruchi Bhan

Theses

Previous experiments have found that grass shrimp, Palaemonetes pugio, from a contaminated site, Piles Creek (PC). in Linden. New Jersey, are larger than those from a relatively pristine reference site, Sheepshead Creek, located in Tuckerton (T), New Jersey.

This study investigated the possibility that PC conditions provide more food for the shrimp, possibly by being a eutrophic environment. thus allowing for greater growth. or that salinity, toxicants, or other factors at. PC stimulate growth. The current experiment indicated that PC conditions do not foster greater growth for the shrimp than T conditions and that PC shrimp are not inherently …

Equivalent Circuit Analysis Of A Seventh Order Bandpass Loudspeaker System, Michael Gunnar Johnson

Theses

A seventh order bandpass loudspeaker system was designed using an equivalent circuit analysis. The electrical, mechanical and acoustic systems were each modeled as separate subcircuits derived by using a Voltage-Force-Pressure or impedance analogy; the interactions between the subcircuits were modeled using coupled controlled-sources. The equivalent circuit was analyzed using SPICE (Simulation Program with Integrated Circuit Emphasis). A technique for modeling port and cavity resonances inside the enclosure using distributed element approximations for the resonant components was developed and verified by measurement.

A complete microcomputer based experimental loudspeaker testing system was designed incorporating a sweep frequency oscillator, a gain-controlled audio power …

Renin-Angiotensin System And Its Relationship To Arterial Pressure Regulation, Sami D. Saume

Theses

The renal system is known to participate in the natural regulation of blood pressure. A renal system model that simulates interaction responses of renal output to arterial blood pressure was developed. The major components of this model are glomerular filtration rate, tubular sodium reabsorption, the renin-angiotensin system, Aldosterone secretion, and antidiuretic hormone secretion. The model's differential equations were coded using Vissim 1.2 student version. It was found that, the renal output increased as glomerular filtration rate, Aldosterone concentration, and blood pressure increased. Conversely, increasing antidiuretic hormone concentration lead to decreased renal output.

Additionally, Angiotensin II and Aldosterone concentrations increased as …

Parameters' Analysis Of 3d Random Stacking Palletization, Najeeb Syed

Theses

Palletization is a very important element of production, distribution and warehousing activities. The 3D random stacking palletization method is based on volume utilization instead of surface area optimization. Random stacking provides interlocking among the boxes and hence it improves the stability of the pallet load. Volumetric Pallet Utilization is normally the prime concern of any palletization process, with Work in Process and Palletization time being also important. This research uses data generated from a previous heuristic to establish mathematical relationships between the three mentioned performance indices and also three additional indirect variables, namely: Total Number of Sub Volumes, Partitioned Remaining …