Engineering Commons^™

Automatic Physical Database Design : Recommending Materialized Views, Wugang Xu

Dissertations

This work discusses physical database design while focusing on the problem of selecting materialized views for improving the performance of a database system. We first address the satisfiability and implication problems for mixed arithmetic constraints. The results are used to support the construction of a search space for view selection problems. We proposed an approach for constructing a search space based on identifying maximum commonalities among queries and on rewriting queries using views. These commonalities are used to define candidate views for materialization from which an optimal or near-optimal set can be chosen as a solution to the view selection …

New Approaches To Scaled-Up Carbon Nanotube Synthesis And Nanotube-Based Metal Composites And Sensors, Amit Goyal

Dissertations

The first phase of the work presented in this dissertation is the development of a scaleable process for the cost-effective synthesis of single walled carbon nanotubes (SWNTs) by thermally-induced catalytic chemical vapor deposition (CVD). With the goal of understanding the growth mechanism and optimize the synthesis process, the effect of CVD and catalyst parameters on nanotube formation was investigated in detail. It was found that nucleation and growth of SWNTs occurred within a few seconds of the introduction of the carbon source, carbon monoxide, at temperatures above 675°C over a Co-Mo/MgO catalyst/support system, resulting in the formation of high quality …

Theoretical Framework For Predicting Joint Reaction And Ground Reaction Forces In A Dynamic Pendulum Tree Model Of Human Motion, Peyman Rajai

Theses

Lagrangian dynamics and the method of superfluous coordinates are applied to find ground and joint reaction forces on the human body modeled as a general branched 2-D pendulum tree system with arbitrary segments and arbitrarily distributed point masses. A theoretical framework is established for predicting these constraint forces during human motion and consequently their effects on dynamics, dynamic stability, energy efficiency and the potential of these forces to produce joint injury and/or pain. Applications to human walking are initiated. During idealized phases where there is only single point contact of the stance leg with the ground such as just after …

Route Recovery Schemes For Link And Node Failure And Link Congestion, Ibrahim Takouna

Theses

Link/Node failure occurs frequently causing service disruption in computer networks. Hardware techniques have been developed to protect the network from Link/Node failure. These techniques work in physical layer, therefore their convergence time is very small. On the other hand, many schemes have been proposed to mitigate the failure influence on the network. These schemes work in upper layers such as the network layer. However, hardware solutions faster than other schemes, but they are expensive. Link/Node failure causes all flows which were using the failed link/node are temporarily interrupted till a new path reestablished.

Three recovery algorithms have been proposed that …

Low Jitter Phase-Locked Loop Clock Synthesis With Wide Locking Range, Adnan Gundel

Dissertations

The fast growing demand of wireless and high speed data communications has driven efforts to increase the levels of integration in many communications applications. Phase noise and timing jitter are important design considerations for these communications applications. The desire for highly complex levels of integration using low cost CMOS technologies works against the minimization of timing jitter and phase noise for communications systems which employ a phase-locked loop for frequency and clock synthesis with on-chip VCO. This dictates an integrated CMOS implementation of the VCO with very low phase noise performance. The ring oscillator VCOs based on differential delay cell …

Direct Simulations Of Cells Motions And Deformations In Flow, Quan Jin

Dissertations

Direct numerical simulations (DNS) are used to study the motions and deformations of blood cells, especially leukocytes, in pressure driven flows in parallel plate channels with both smooth and uneven walls under adhesion force between the leukocytes and the channel wall.

Leukocytes are represented by two composite fluid models. The first model is the compound-drop model in which the cytoplasm and the nucleus are modeled as fluids, and the second one is the drop-rigid-particle model in which the cytoplasm is modeled as a fluid and the nucleus as a rigid particle. The adhesion force is computed using two adhesion force …

Formation Of Rdx Nanoparticles By Rapid Expansion Of Supercritical Solution : In Situ Characterization By Laser Scattering, Takuya Matsunaga

Dissertations

Cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), a well-known energetic material, is highly explosive. Reduction of the sensitivity of RDX is desired for safe handling and

storage in military applications. Data on the sensitivity of RDX in the 10-1000 µm crystal size range suggested that the impact sensitivity could be further reduced by reduction of the crystal size to the sub-micron or nano-scale (Armstrong, 1990). Recent research with nano-RDX obtained using Rapid Expansion of Supercritical Solutions (RESS) confirmed these expectations (Stepanov, 2005).

RESS process appeared to be one out of a few techniques of production of nanoscale energetic materials free of the risk of explosion. …

Analysis Of Truck Delays At Container Terminal Security Inspection Stations, Dae-Gwun Yoon

Dissertations

After September 11, 2001, special attention has been given to the vulnerability at container transportation to terrorist activities. United States Customs and Border Protection (CBP) has set up inspection stations for containers at seaport terminals to screen containers, but this practice affects the truck turnaround time in the seaport by generating additional processing delays.

This dissertation analyses the additional truck turnaround time incurred at the inspection stations under various levels of security. Queuing models were used to estimate truck delay as containers are inspected at two successive security inspection stages. Each stage may utilize one or more inspection equipment. The …

Synthesis And Analysis Of Reactive Nanocomposites Prepared By Arrested Reactive Milling, Swati M. Umbrajkar

Dissertations

Different types of reactive nanocomposites have been synthesized by Arrested Reactive Milling (ARM). The technical approach was to increase the interface area available for heterogeneous reaction between solid fuel and oxidizer components. Using aluminum as the main fuel and different metal oxides as oxidizers, highly energetic reactive nanocomposites with different degrees of structural refinement were synthesized. Specifically, stoichiometric Al-MoO₃, Al-CuO, and Al-NaNO₃ material systems were studied in detail.

The correlation of heterogeneous exothermic reactions occurring in the nanocomposite powders upon their heating at low rates and ignition events observed for the same powders heated rapidly was of …

Reliability Studies Of Tin/Hf-Silicate Based Gate Stacks, Naser Ahmed Chowdhury

Dissertations

Hafnium-silicate based oxides are among the leading candidates to be included into the first generation of high-Κ gate stacks in nano-scale CMOS technology because of their distinct advantages as far as thermal stability, leakage characteristics, threshold stability and low mobility degradation are concerned. Their reliability, which is limited by trapping at pre-existing and stress induced defects, remains to be a major concern.

Energy levels of electrically active ionic defects within the thick high-Κ have been experimentally observed in the context of MOS band diagram for the first time in Hf-silicate gate stacks from low temperature and leakage measurements. Excellent match …

Central And Peripheral Autonomic Influences : Analysis Of Cardio-Pulmonary Dynamics Using Novel Wavelet Statistical Methods, Anne Marie Petrock

Dissertations

The development and implementation of novel signal processing techniques, particularly with regard to applications in the clinical environment, is critical to bringing computer-aided diagnoses of disease to reality. One of the most confounding factors in the field of cardiac autonomic response (CAR) research is the influence of the coupling of respiratory oscillations with cardiac oscillations.

This research had three objectives. The first was the assessment of central autonomic influence over heart rate oscillations when the pulmonary system is damaged. The second was to assess the link between peripheral and central autonomic control schema by evaluating the heart rate variability (HRV) …

Design And Performance Of Cdma Codes For Multiuser Communications, Radharani Poluri

Dissertations

Walsh and Gold sequences are fixed power codes and are widely used in multiuser CDMA communications. Their popularity is due to the ease of implementation. Availability of these code sets is limited because of their generating kernels. Emerging radio applications like sensor networks or multiple service types in mobile and peer-to-peer communications networks might benefit from flexibilities in code lengths and possible allocation methodologies provided by large set of code libraries.

Walsh codes are linear phase and zero mean with unique number of zero crossings for each sequence within the set. DC sequence is part of the Walsh code set. …

In Vitro Studies Of Degradation And Bioactivity Of Aliphatic Polyesther Composites, Georgia Chouzouri

Dissertations

In spite of numerous publications on the potential use of combinations of aliphatic polyester composites containing bioactive fillers for bone regeneration, little information exists on the combined in vitro mechanisms involving simultaneously diffusion for polymer degradation and bioactivity through nucleation and growth of apatite in simulated body fluid (SBF) solution. The objective of this study is to contribute to the understanding of the fundamentals in designing non-porous, solid materials for bone regeneration, from experimental data along with their engineering interpretation.

Bioactivity, in terms of apatite growth, was assessed through several experimental methods such as scanning electron microscopy (SEM), energy dispersive …

In Vitro Feasibility Testing Of Floating Light-Activated Minroelectrical Stimulators, Ammar Riad Abdo

Theses

One of the major challenges of neural stimulation is the mechanical stress and resulting trauma induced on the implanted electrodes by the constant movement of the interconnects. A potential way of eliminating interconnects is to use floating micro-stimulators that can be activated through optical means. As a method of energy transfer to the micro-stimulator, we propose to use a laser beam at near infrared (NIR) wavelengths.

There are two main objectives in this project to test the feasibility of the main approach; investigate the charge injection capacity of titanium nitride (TiN) and iridium oxide (IrOx) as potential contact materials, and …

Adaptable Videogame Platform For Interactive Upper Extremity Rehabilitation, Sally M. Jensen

Theses

The primary objective of this work is to design a recreational rehabilitation videogame platform for customizing motivating games that interactively encourage purposeful upper extremity gross motor movements. Virtual reality (VR) technology is a popular application for rehabilitation therapies but there is a constant need for more accessible and affordable systems. We have developed a recreational VR game platform can be used as an independent therapy supplement without laboratory equipment and is inexpensive, motivating, and adaptable. The behaviors and interactive features can be easily modified and customized based on players' limitations or progress.

A real-time method of capturing hand movements using …

Automatic Registration And Segmentation Of Abdominal Images And Detection Of Pancreatic Cancer, Girish Kumar Maniprasad

Theses

Localized and detailed analyses of 3D abdominal images obtained through different imaging modalities help greatly in determining the progression of a disease or for postoperative treatment / evaluation. However, such analyses become difficult and sometimes unfeasible due to the effects of patient motion and breathing. This is particularly evident during analysis of the pancreas for cancer, due to its proximity to other intra-abdominal organs. Within subject registration thus becomes imperative for pathological analysis of pancreatic cancer. An intensity-based, global image registration algorithm was developed in the present work, for registration of pancreatic abdominal images. The registration algorithm was automatic and …

Development And Evaluation Of A Simultaneous Multithreading Processor Simulator, Carla Verena S. Nunez

Theses

Modem processors are designed to achieve greater amounts of instruction level parallelism (ILP) and thread level parallelism (TLP). Simultaneous multithreading (SMT) is an architecture that exploits both LLP and TLP. It improves the utilization of the processor resources by allowing multiple independent threads to reside in the pipeline and dynamically scheduling the available resources among the threads.

The first part of this thesis presents the development of a simultaneous multithreading processor simulator. The SMT simulator is derived from SimpleScalar, a superscalar processor simulator widely used in the computer architecture research field. The basic pipeline is expanded to allow multiple threads …

Titanium Nitride As An Electrode Material For High Charge Density Applications, Mustafa Khan Patan

Theses

Present day neural prostheses require electrodes with high current densities. Traditional electrodes are not capable of delivering such high current densities. Titanium nitride as an electrode material and other techniques like reactive ion etching, platinization of titanium were studied in this thesis towards improving charge density of electrodes.

Titanium nitride (TiN) was sputtered in a custom designed pattern of electrodes with silicon as substrate, at a deposition rate of 2 A /sec. Atomic Force Microscopy (AFM) analysis of TiN film showed a smooth surface for a film thickness of 1 μm. X-Ray Diffraction (XRD) analysis of the film showed the …

Vibrotactile Sensory Substitution For Post-Stroke Rehabilitation, Carlos X. Rosado

Theses

The aftermath of a stroke leaves people with side effects such as speech and hearing problems, and loss of sensation in one side of their body. Sensory feedback in the hand is used to assess if the individual is using appropriate grip force to hold and use objects; lack of sensory feedback can lead to dropped or damaged objects, and possible hand injury. Existing force biofeedback devices are overly complex and difficult to use in the home. The goal of this project is to provide increased environmental awareness of hand grip force for individuals with reduced hand sensation. Although hand …

Hydrodynamics Investigation Of In-Vitro Dissolution Testing, Ge Bai

Dissertations

Dissolution testing is routinely carried out in the pharmaceutical industry to determine dissolution rate of solid dosage forms. The United States Pharmacopoeia (USP) Dissolution Apparatus II is the device most commonly used for this purpose. Despite its widespread use, dissolution testing remains susceptible to significant error and test failures. Limited information is available on the hydrodynamics of this apparatus, although hydrodynamic effects can play a major role on test performance.

Laser-Doppler Velocimetry (LDV) and Computational Fluid Dynamics (CFD) were used here to experimentally map and computationally predict the velocity distribution inside a standard USP Apparatus II under the typical operating …

Some Contributions On Mimo Radar, Nikolaus Lehmann

Dissertations

Motivated by recent advances in Multiple Input Multiple Output (MIMO) wireless communications, this dissertation aims at exploring the potential of MIMO approaches in the radar context. In communications, MIMO systems combat the fading effects of the multi-path channel with spatial diversity. Further, the scattering environment can be used by such systems to achieve spatial multiplexing. In radar, a complex target consisting of several scatterers takes the place of the multi-path channel of the communication problem. A target's radar cross section (RCS), which determines the amount of returned power, greatly varies with the considered aspect. Those variations significantly impair the detection …

Nanoparticle Formation And Coating Using Supercritical Fluids, Abhijit Aniruddha Gokhale

Dissertations

Jet breakup phenomenon and nanoparticle formation

The focus of this dissertation is to study the SAS process to manufacture nanoparticles with minimum agglomeration, controlled size and size distribution. Solution jet breakup and solvent evaporation into supercritical fluid (SC CO₂) is studied using high speed charged coupled device (CCD) camera facilitated with double shot particle image veloimetry (PIV) laser and a high pressure view cell. Particles formation using SAS is studied. Polyvinylpyrrolidone (PVP) particles are formed using micron size capillary nozzles and combination of thermodynamically good and poor solvents in order to achieve nano-sized particles with reduced agglomeration and …

Solvent Resistant Microporous/Nanoporous Polymeric Hollow Fiber And Flat Film Membranes And Their Applications, Praveen B. Kosaraju

Dissertations

The separation and purification of organic-solvent-based process streams may be carried out by membrane processes such as nanofiltration/ultrafiltration/microfiltration and membrane solvent extraction. Lack of solvent stability and chemical stability of most commercially available membranes is limiting the utilization of the above mentioned membrane technologies. This dissertation was primarily focused on developing solvent resistant hollow fiber and flat film membranes for separation and purification of organic-solvent-based process streams.

Available porous polymeric supports (Polypropylene (PP), Polyethersulfone (PES) and Nylon) suitable for the required solvent-stable applications were chosen first and then the supports were modified to satisfy the requirements for the applications. Membrane …

Enhancement Of Fluidization And Filtration Using Nanoparticle Agglomerates And Aerogels, Jose A. Quevedo

Dissertations

Previous works have classified the fluidization behavior of nanoparticles as Agglomerate Particulate Fluidization (APF) and Agglomerate Bubbling Fluidization (ABE). These fluidization behaviors are quite different in regard to the fluidized bed expansion, the presence of bubbles and the smoothness of the bed surface, with APF nanopowders showing a much more homogeneous fluidization and a much better dispersion than ABE nanopowders which are generally very difficult to fluidize and show vigorous bubbling. In the present work, the fluidization of APF as well as ABF nanopowders is studied in depth, both conventionally, and in the presence of extemal assistance; several related topics …

Investigation Of Formation And Applications Of High-Speed Liquid Projectiles, Oleg Petrenko

Dissertations

The work comprises experimental and numerical studies of generation and application of high-speed liquid projectiles. Numerical models were created for a projectile formation by two kinds of launchers, water extruder and water cannon. In the water extruder the kinetic energy of a fast moving piston is transferred to the water load and extrudes the load at a high speed. By contrast in the water cannon the water load itself accumulates the kinetic energy from the expanding combustion gasses. Then, in the course of water motion through the converging nozzle the energy is redistributed between head and tail of the projectile. …

Doppler Spread Estimation In Mobile Fading Channels, Hong Zhang

Dissertations

The Doppler spread, or equivalently, the mobile speed, is a measure of the spectral dispersion of a mobile fading channel. Accurate estimation of the mobile speed is important in wireless mobile applications which require such as knowledge of the rate of channel variations. In this dissertation, first the performance of classical crossing- and covariance-based speed estimators is studied. Next, the problem of mobile speed estimation using diversity combining is investigated. Then, a nonparametric estimation technique is proposed that is robust to different channel variations. Finally, cyclostationarity-based speed estimators which can be applied either blindly or with the aid of pilot …

Reactive Modification And Crystallization Behavior Of Foamed Poly(Butylene Terephthalate), Byeong Joon Jeong

Dissertations

The objective of this study is to investigate the feasibility of preparing low density foams based on poly(butylene terephthalate) (PBT) through modification of its molecular structure and rheological characteristics by reactive extrusion. The scientific and/or engineering interpretation of the experimental data was based on fundamentals of extrusion, crystallization mechanisms, as well as information on reactivity and tendency toward degradation of PBT.

As a preliminary study, the extrusion foaming behavior of a commercial linear semi-crystalline PBT with a chemical blowing agent (CBA) was investigated. Foam characteristics were functions of extrusion operational variables, such as die set temperature and screw speed. Gas …

Flow Characteristics And Phase Interactions Of Evaporating Sprays In Gas-Solid Suspensions, Muhammad Mushahid Rafique Qureshi

Dissertations

Evaporating spray jets have a wide range of applications in many industrial processes such as fluidized catalytic cracking of crude oil in petroleum refinery, coal gasification, fluidized coking to make synthetic crude oil, and condensed mode gas polymerization. The rapid evaporation of spray jets significantly affects the gas-solids mixing, solids concentration, gas/solids temperature and gas/solids velocity acceleration. The complex interactions mechanism of phase change, three phase interaction, heat and mass transfer of gas, solids and evaporating droplets dominate the process efficiency and product quality. In such three-phase flows, the phase transport characteristics are influenced by both droplet-gas interaction and droplet-solid …

Solubility In Supercritical Carbon Dioxide, Syed Asif Abdullah

Theses

The different techniques used for the determination of the solubility of compounds in supercritical carbon dioxide are described. A comparative study is made of the methods used in the measurement of the concentration of benzoic acid and caffeine in supercritical carbon dioxide. The difference in measurement techniques did not have much effect on the solubility data at lower pressures. However, at higher pressures, the solubility data obtained by different techniques began to deviate from each other.

Further, the method used by different researchers in generating the solubility data in supercritical carbon dioxide is also discussed. A number of data sheets …

Functionalization Of Nanoclays Through Exchange Reactions, Jin Uk Ha

Theses

A cationic clay (sodium-montmorillonite, MMT) and an anionic clay (hydrotalcite, HT) were treated with two phosphonium based ionic liquids (ILs) and a commercial corrosion inhibitor. Clay modification was examined by TGA, FTLR and WXRD. The cationic clay modified with both ILs had similar thermal stabilities since they contained the same cation although the original anions were different. The thermal stability of the modified clays was higher than that of a commercial organoclay and of clays modified in our group with smaller MW pyridinium and imidazolium based cations. 10 wt% of interchanged cation was found under selected time/temperature treatment conditions.

Clays …