Engineering Commons^™

Strong And Ductile Additively Manufactured Ti-6al-4v Through Yttrium Inoculation, Saeid Alipour, Ji Young Kim, Min Seok Kim, Arezoo Emdadi, Ju Li

Materials Science and Engineering Faculty Research & Creative Works

The unique microstructural features and thermal cycles in alloys produced by additive manufacturing (AM) techniques have led to the emergence of a new paradigm in the design and development of alloys for performance-critical applications. Despite the inherent microstructural features of AMed parts, optimizing the porosity-microstructure while acquiring desired mechanical performance has been crucial yet challenging. Hence, in many legacy alloys, achieving a strength-ductility synergy in the as-built condition without applying post-heat treatment or hybrid processes is considered an arduous task. In this research, we aimed to tailor the microstructure of the legacy Ti-6Al-4V alloy in the as-built condition by implementing …

Evaluating The Integration Of Bio-Based Waste Into Cement Production: A Pathway To Sustainable Building, Anja Terzić, Suzana Filipović, Adriana Peleš Tadić, Jelena Živojinović, Ivana N. Jelić, Nina Obradović, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Rapid urbanization has increased the demand for building materials, depleting natural resources used in cement production and prompting the use of alternative and waste materials. This research verifies that eggshell powder waste can fully replace limestone in clinker synthesis. Five clinkers were produced using eggshell powder, aluminum sources (bentonite, zeolite, fly ash, and kaolinitic–illitic clay), Fe-slag, and quartz sand, with mechanical preprocessing (10–30 min) before sintering at 1300 °C. Experimental tests assessed the effects of mix design and mechanical activation on clinkerization, phase formation, temperature, and mechanical properties. XRD, FTIR, and SEM/EDS confirmed consistent phase compositions and primary cement minerals. …

Computer Vision And Machine Learning Approaches For Defect Detection In 3d-Printed Cementitious Materials: A Systematic Review, Muhammad Ali Musarat, Ruben Paul Borg, Jingjie Wei, Carl James Debono, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D printing is evolving at a fast pace in both the manufacturing and construction sectors. These advancements can greatly benefit these industries. However, the 3D printing of concrete structures presents some challenges due to defects in the 3D concrete printed elements. Hence, this study systematically reviews Artificial Intelligence (AI)-driven techniques, such as Computer Vision and Machine Learning, to identify surface defects that can occur in 3D-printed cementitious material structures. The adopted methodology was the PRISMA statement with the aim of reporting the systematic review and meta-analysis. Two well-known databases, Web of Science and Scopus, were utilised for data extraction of …

Evaluation Of Radar-Derived Polarimetric Precipitation Estimates For Extreme Rain Events Using A Dense Network Of Rain Gauges, Bong Chul Seo, Witold F. Krajewski, James A. Smith, Alexander V. Ryzhkov

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The study evaluates radar-based quantitative precipitation estimations (QPEs) for 10 extreme rain events that occurred between 2013 and 2019 in the Kansas City metropolitan area, United States. These precipitation estimates were derived at hourly and approximately 0.5-km scales using two polarimetric QPE algorithms}one based on specific attenuation (A) and the other on specific differential phase (KDP)} for the study area covered by two overlapping radars in Topeka, Kansas, and Kansas City, Missouri. The polarimetric QPE assessment for extreme rain events was motivated by improved flood forecasting and precipitation frequency analysis. The analysis utilizes ground reference observations from a dense network …

Enameling Coating Of Pipes: Thermal Proprieties And Corrosion Tests, Signo Reis, Genda Chen, Mike Koenigstein, Liang Fan

Materials Science and Engineering Faculty Research & Creative Works

Enamel coating on pipelines can be done in several ways such as the wet process, plasma spray, and electrostatic process. Wet process requires little capital expenses and provides an acceptable finish for industrial applications particularly when the part to be coated is small. Electrostatic process of enamel powder is most promising to coating large pipelines in field conditions. The enamel coating applied by the electrostatic process is very consistent and smooth since each particle is glass only. However, the powder is very fragile until fired and the charge retention is lowered in high humidity conditions. Coupons cut from a full-size …

Mechanism Of Improved Miscibility Of Co2–Oil Systems By Multiester-Headgroup Surfactants, Ning Xu, Yanling Wang, Baojun Bai, Yu Zhang, Wenjing Shi, Zhaonian Zhang, Wenhui Ding, Peixu Ma, Zan Gao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In the pursuit of carbon neutrality, the CO₂-enhanced oil recovery provides dual benefits by enabling both carbon sequestration and incremental oil production. However, its application is limited by high minimum miscibility pressure. CO₂-philic and oil-affinitive surfactants have emerged as an effective, low-dosage, and cost-efficient strategy to reduce the minimum miscibility pressure. In this study, macroscopic phase behavior experiments combined with molecular dynamics simulations were employed to systematically elucidate the influence of multiester-head surfactants on CO₂–oil miscibility. Using a modified pressure–volume–temperature apparatus equipped with optical power monitoring, we determined that multiester-head surfactants reduced the first-contact …

Advances In The Design Of Bio-Organic Resistive Switching Memory, Muhammad Awais, Yi Sheng Wong, Feng Zhao, Kuan Yew Cheong

Electrical and Computer Engineering Faculty Research & Creative Works

Bio-organic materials have garnered significant attention as sustainable candidates for non-volatile resistive switching memory (RSM) because of their specialized chemical, structural, and environmental advantages. This review presents a design-centered perspective on bio-organic RSM by outlining the key device components required for effective device engineering, including electrode materials, memristive thin films, intermediate layers, substrates, and electrical measurement strategies. Each component is discussed in detail with respect to the material properties and operational parameters that influence overall device performance, such as functional groups, interfacial interactions, and processing conditions. The review further analyses the critical roles of electrode pairing, interfacial chemistry, additive incorporation, …

Uptake And Fate Of Silver And Zinc Engineered Nanoparticles In Maize Under Single And Binary Dosing Soil Ecosystems, Lei Xu, Qingbo Yang, Xingmao Ma, Honglan Shi, John Yang, Hu Yang, Samira Mahdi, Ying Wang, Young Shin Jun

Chemistry Faculty Research & Creative Works

Recent agricultural applications of engineered metallic nanoparticles (ENPs) have raised concerns about their uptake and fate in plants. To understand this critical issue, this study investigated the fate and uptake of silver (Ag) and zinc oxide (ZnO) ENPs in maize (Zea mays L.) after single or binary ENP exposure in soil. Results indicated that both Zn and Ag elemental concentrations in roots increased with increasing ENP dosage. Ag NPs in the tissues were detected, but not Zn NPs. Ag NP concentration was 3 times higher in the roots than in the shoots at low Ag NP dosing, while Ag NP …

Rioi: A Microwave-Photonic Rf-Interferometric Interrogation Technique For Enhanced Fiber Optic Sensing, Chen Zhu, Ruimin Jie, Chenxi Huang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Fiber optic interferometric (FOI) sensors are widely recognized for their high sensitivity, design flexibility, and multiplexing capabilities, making them ideal for applications ranging from structural health monitoring to biomedical diagnostics. However, conventional optical-domain interrogation techniques are often limited by the performance constraints of spectrometers. In this work, we present a radiofrequency (RF)-interferometric optical interrogation (RIOI) method for FOI sensors. This approach leverages microwave photonic (MWP) processing to encode the optical interference phase into an RF signal, which is then combined with a reference RF signal to produce a microwave-domain interferogram. By tracking spectral shifts in the RF domain, RIOI achieves …

Sulfuric Acid Mist Generation, Calculation, And Suppression Mechanism And Methods In Electrowinning: A Review, Ashish Kakoria, Mirza Muhammad Zaid, Guang Xu

Mining Engineering Faculty Research & Creative Works

This review discusses the events of acid mist production at the final stage of hydrometallurgical metal production in copper electrowinning. This review entails the complete process of oxygen bubble generation on the anode and its stages to form into acid mist at the surface of the electrolyte. When these bubbles burst at the solution/air interface, fine acid-containing liquid droplets become airborne and spread throughout the workspace, with the impact factors suppressing the acid mist produced during the process. Also, parameters such as bubble size, temperature, surface tension, and visco-elasticity also affect the acid mist. Sulfuric acid affects the tank houses …

Quantitative Phase-Field Modeling Of Nonequilibrium Microstructural Evolution In Rapid Solidification For Additive Manufacturing, Leiji Li, Fei Xiao, Ying Zhou, Xiaorong Cai, Chongfeng Zhang, Jinzhong Gao, Xiaopeng Shen, Tianchi Zhu, Sihan Wang, Yijia Gu, Xuejun Jin

Materials Science and Engineering Faculty Research & Creative Works

Fusion-based metal additive manufacturing (AM) relies on layer-by-layer deposition and rapid solidification, where the material transitions swiftly from liquid to solid. A key phenomenon during this process is solute trapping, a nonequilibrium effect governed by a velocity-dependent partition coefficient, which critically influences microstructure kinetics, morphology, and phase formation. In this study, we employ a recently proposed quantitative phase field (PF) model to systematically explore solute trapping, solute drag, and their impacts on pattern formation during rapid solidification at AM-relevant velocities, in both one and two dimensions. Our simulations reveal a growth mode transition from planar to cellular to dendritic, and …

Evaluating Fine-Scale Air-Quality Heterogeneity Using A Low-Cost Multipollutant Sensor Network In Twin Cities, Minnesota, Varuni Abhayaratne, Weixing Hao, Chen Ye, Anjana Yatawara, Philip K. Hopke, Jiayu Li, Yang Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There is growing interest and effort in deploying low-cost sensors (LCSs) to understand fine-scale spatiotemporal heterogeneity of ambient air pollutants in urban areas. The Assessing Urban Air Quality project conducted by the Minnesota Pollution Control Agency deployed 45 low-cost air-quality monitors (AQMesh, Environmental Instruments Ltd.) in the Minneapolis/St. Paul metropolitan area network. Hourly averaged pollutant concentrations or mixing ratios for carbon monoxide (CO), ozone (O₃), nitrogen dioxide (NO₂), nitric oxide (NO), and sulfur dioxide (SO2), as well as particulate matter (PM), including PM1, PM2.5, and PM10, were obtained. The network data from June 2019 to June …

Sex-Based Effects Of Shock Energy Exposure In Warfighters, Melissa Sutter, Catherine Johnson

Mining Engineering Faculty Research & Creative Works

Personal armors were initially designed to fit against the male torso, as men previously filled roles requiring them, thus not made to accommodate the female anatomy. As a result, armor worn by female warfighters tends to have non-form fit in the waist, armpit, bust, and collarbone areas, causing reduced coverage. Shifting, riding up, air gaps, breathing difficulty, and physical discomfort have also been observed. Although this has been documented, the impact on the armor's protective capabilities has not been well studied. To address this, this study compared the protective capabilities of unisex armor for male and female warfighters from shock …

Indirect Carbonation Of Fbc Ash For Sustainable Production Of Caco3 And Reactive Pozzolanic Residues, Suhawn Ju, Heejung Jun, Seongho Han, Minseok Kim, Soohyun Song, Mingi Cho, Sukhoon Pyo, Jinyoung Yoon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigates the potential of indirect carbonation for CO₂ sequestration and high-purity CaCO₃ production using fluidized bed combustion (FBC) fly ash (FFA) and bottom ash (FBA). XRF and XRD analyses revealed high reactive CaO contents derived from lime, portlandite, and anhydrite. Calcium extraction using 1- mol NH₄Cl achieved markedly higher efficiency than deionized (DI) water, yielding up to 17,586 mg/L of Ca²⁺ and producing 10.2 wt.% and 8.4 wt.% CaCO₃ from FFA and FBA, respectively, with CO₂ capture capacities of 45.0 and 36.8 kg per ton of ash. The precipitated CaCO₃ exhibited …

Exploring Scms And Fibers For Structural Build-Up In 3d Printing Using Penetration Test, Shiva Kumar Goud Kasani

Miners Solving for Tomorrow Research Conference

Additive manufacturing with cementitious materials advances rapidly, but predicting structural build-up is critical for 3D printed structure buildability. Various supplementary cementitious materials (SCMs) and fibers are commonly used to enhance structural build-up in 3D printing. Evaluating their effects is necessary for successful printing. In this research, this effect is studied for common SCMs, including fly ash and silica fume, and fibers including polypropylene (0.375% and 0.75% by volume), steel (0.75% and 1.5% by volume), and hemp fibers (0.375% and 0.75% by volume). The Structural build-up was quantified through continuous static yield stress measurements (via vane rheometer, penetration, and slump) during …

Synthesis And Hydrothermal Evaluation Of Poly(Styrene Phosphonate) For Conformance Control In Geothermal Reservoirs, Sara Mccauley

Miners Solving for Tomorrow Research Conference

As atmospheric carbon dioxide levels continue to rise, geothermal energy has emerged as a promising energy alternative to fossil fuels. A barrier to widespread implementation and energy production efficiency is macro-heterogeneity of the rock matrix. Cracks, void spaces, and flow conduits divert fluid flow away from unswept portions of the geothermal reservoir and can cause cooling of the reservoir. Flow heterogeneity has been treated in oil reservoirs by injecting hydrogel particles that travel preferentially to ultra-high permeability zones and selectively block fluid flow in these regions. We are applying polymer hydrogels that withstand hydrothermal conditions of 225 up to 275°C …

Challenges And Best Practices Of Regional Innovation Ecosystems, Mahnaz Asgari Sooran

Miners Solving for Tomorrow Research Conference

Many places around the world are developing regional innovation ecosystems to spur regional economic. Many innovation ecosystems fail or barely maintain their initial momentum after a few years. In this paper, we identified challenges and best practices facing innovation ecosystems interviews with the innovation ecosystem stakeholders. We employed the MIT REAP (Regional Entrepreneurship Acceleration Program) model to categorize the five main stakeholders of the innovation ecosystem: entrepreneurs, universities, industry, risk capital, and government. Our initial results indicated the following: (a) Access to capital and talented workforce; (b) Stakeholder discovery process is one of the critical areas to understand the basic …

Simulating Thermal Diffusion Through Image-Derived Microstructures Of Ceramic Matrix Composites, Matik Heskin

Miners Solving for Tomorrow Research Conference

Thermal energy transport in materials can be effectively modeled using finite element software such as COMSOL. Experimentally measured or NIST–JANAF thermal conductivity data can be used to represent material behavior within these simulations. For heterogeneous or composite materials, effective properties are often approximated using rule-of-mixtures calculations. However, this overlooks the nuanced effects caused by complex microstructural geometry. To address this limitation, imaging and coding tools such as MATLAB can be used to process scanning electron microscopy (SEM) images. By thresholding the images to distinguish constituent materials, a representative mesh can be generated and imported into an FEM program. This approach …

Human Intention Prediction Using Cnn And Lstm Networks In Physical Human–Robot Interactions, Khosro Ghorbani Zadeh

Miners Solving for Tomorrow Research Conference

Advances in robotics and artificial intelligence have increased expectations for interactive robots in eldercare and assistive applications. A key challenge in creating safe and effective systems is accurately recognizing human intent and translating it into meaningful commands for robots to follow. Traditional physics-based models often fail to fully represent human force interactions due to their dynamic nature, while neural networks provide a promising alternative for predicting force-movement intentions. Multi-layer perceptrons (MLPs) show potential, however, they struggle with temporal dependencies and generalization. Long Short-Term Memory (LSTM) networks and Convolutional Neural Networks (CNNs) help address these limitations. This study compares these architectures …

Ai-Driven Frameworks For Mitigating Rockfall Hazards, Unstable Ground Condition And Improving Safety In Underground Mine Through Thermal Imaging, Akhrorbek Narmatov

Miners Solving for Tomorrow Research Conference

Scaling, the removal of loose rocks from excavation walls to prevent rockfalls is a critical safety procedure in underground mining operations. Approximately a quarter of fatal mining accidents are due to rockfalls. Detecting unstable rocks during scaling and assessing ground stability remain challenging due to limited visibility, dust, and environmental conditions.

Excavation disturbs the in-situ stress state, causing stress redistribution, fracture propagation, and the formation of discontinuities that lead to loose rock blocks. Ventilation airflow affects heat transfer at exposed surfaces, amplifying temperature contrasts between intact rock and fractured blocks associated with instability.

Current practices rely on manual inspection, requiring …

Toward Sustainable 3d Printable Cementitious Materials: Low-Carbon Design With Fiber Reinforcement, Nima Mahmoudzadeh Vaziri

Miners Solving for Tomorrow Research Conference

3D printing of cementitious materials, as an emerging construction technology, faces challenges in both mechanical performance and sustainability. Conventional mixture designs rely on high cement contents, leading to increased CO2 emissions, while printed elements often exhibit brittle behavior with limited crack resistance and reduced post-cracking performance. This study investigates the development of low-carbon 3D printed cementitious composites using environmentally friendly supplementary cementitious materials (SCMs) and fillers, combined with fiber reinforcement to enhance mechanical performance. Locally available SCMs and fillers were incorporated to significantly reduce cement content (>40%) and improve sustainability. Fiber reinforcement was introduced to mitigate brittleness and enhance …

Scenario-Based Pareto Analysis For Multi-Objective Optimization Of Process Parameters To Improve Life Cycle Impacts: Case Study Of Ge Production, Dennis Dadzie

Miners Solving for Tomorrow Research Conference

Growing demand for critical minerals increases the need for clear evidence on the environmental burdens of their production. Life‑cycle assessment (LCA) quantifies impacts, but it does not by itself show how to navigate competing environmental performance improvement goals. We examine 63 process configurations for single‑crystal germanium made via chlorinated distillation using five indicators: global warming potential (GWP), water consumption (WC), fine particulate matter (FPM), terrestrial acidification (TA), and cumulative energy demand (CED). Across scenarios, WC is negatively correlated with GWP, weakly related to FPM, TA, and CED, while the other four indicators are strongly positively correlated. Pareto analysis highlights a …

Assessing Radon And Radon Progeny Deposition On Simulated Lung Filter System: Effects Of Cigarette And E-Cigarette Use Based On The Icrp Model, Manuela Isabel Arenas Alvarez

Miners Solving for Tomorrow Research Conference

This project investigates the potential interaction between radon exposure and e-cigarette aerosols, focusing on how radon progeny deposit in the lungs under combined conditions. An experimental system was developed to simulate regional lung deposition based on the International Commission on Radiological Protection (ICRP) model. The setup uses a filter-based design and a custom modular atomizer to generate stable aerosols, with four commercial plastic filters evaluated. Initial results demonstrate reproducible filtration behavior and a total deposition pattern matching ICRP predictions within 21% error. Ongoing work aims to improve agreement with regional deposition curves and enable combined radon–aerosol exposure experiments. This platform …

Preventive Maintenance Scheduling Using Artificial Intelligence And Decision Support Agent, Samiksha Aryal

Miners Solving for Tomorrow Research Conference

Preventive Maintenance models have traditionally relied on a time-based maintenance model, which uses fixed statistical distribution to represent the time-to-failure (TTF). The requirement of data-driven models and automated decision-making systems have become essential for modern manufacturing systems. The use of fixed statistical distribution limits the ability of existing models in producing solutions in real-time. Our model overcomes these limitations by implementing an empirical distribution to represent TTF. The empirical distribution is generated using a neural network which eliminates noise from the raw maintenance log. Renewal Reward Theorem (RRT) is implemented to efficiently provide maintenance threshold in real time. The use …

Robustness Of Fuzzy Artmap To Adversarial Attacks And Progressive Adversarial Training For Streaming Learning, Shane Cairns

Miners Solving for Tomorrow Research Conference

Incremental learners deployed on streaming data must remain robust to evolving adversarial perturbations, yet most adversarial-robustness studies assume offline multi-epoch training with repeated access to historical data. We investigate adversarial robustness in Fuzzy ARTMAP, a prototype-based Adaptive Resonance Theory model that supports single-pass learning without replay. We propose WB-Softmax, a differentiable relaxation that aggregates category-level activations into class-level scores for gradient-based attacks. WB-Softmax PGD achieves 89–100% attack success on vanilla models, exceeding transfer and query-based baselines. We then study adversarial training under true streaming constraints by comparing offline versus online adversarial example generation and standard versus selective updates. Offline adversarial …

Assessing The Effects Of Scale-Dependent Representation Of River Networks On Hydrologic Prediction, Hari Dhital

Miners Solving for Tomorrow Research Conference

Accurate hydrologic prediction at relevant spatial scales is essential for flood risk management. This study explores how spatial scale affects model parameters and simulation outcomes in the Hillslope Link Model (HLM). This was motivated by HLM implementation within the Next Generation Water Resources Modeling (NextGen) framework for the U.S. National Water Model. Since NextGen alters HLM's spatial scale from hillslopes to catchments, we assess how this change affects runoff generation and routing. We implement HLM at both scales using identical, predetermined parameters without calibration to isolate spatial discretization effects. Using approximately ten years of precipitation and streamflow data from watersheds …

Evaluation Of National Water Model Long-Range Streamflow Forecasts In Missouri, Sujan Maharjan

Miners Solving for Tomorrow Research Conference

Long-range river stage forecasts are increasingly used to support barge scheduling along the Missouri and Mississippi River navigation corridor. The reliability of these forecasts over extended lead times remains uncertain, particularly in regulated systems influenced by upstream dam operations. This study evaluates the lead-time-dependent performance of National Water Model long-range forecasts at eleven U.S. Geological Survey stations from Rulo to Thebes during 2019–2024. Results show that forecast skill does not decline smoothly with time but exhibits station-specific dips at lead times corresponding to hydraulic travel from major control structures. These periods coincide withstage bias and dispersion, indicating elevated operational uncertainty. …

Evaluation Of Channel Routing Module In The Nextgen National Water Model, Md Saiduzzaman

Miners Solving for Tomorrow Research Conference

The Next Generation Water Resources Modeling (NextGen) framework has a modular structure that enables the integration of multiple hydrologic models with channel routing processes. Within NextGen, the T-Route model performs channel routing using vector-based river networks and supports a hybrid routing approach within a single watershed. This study evaluates the hydraulic diffusive wave routing method implemented in T-Route and compares its performance with the operational Muskingum-Cunge routing used in the National Water Model. The primary objective is to assess the operational capability of streamflow data assimilation across different routing methods using an extensive network of streamflow observations. The routing models …

Controlled Gelation Of Co₂-Resistant Polymer Systems For Improved Conformance In Co₂-Eor, Maryam Sharifi Paroushi

Miners Solving for Tomorrow Research Conference

This presentation introduces a CO₂-resistant hydrogel developed to control fluid movement and improve CO₂ injection performance in subsurface reservoirs for Enhanced Oil Recovery (EOR) and Carbon Capture and Storage (CCS). Conventional polymer gels often lose strength in CO₂-rich environments, resulting in weak plugging, early breakdown, and ineffective flow control. To address this limitation, a sulfonated HPAM-based gel system crosslinked with chromium was developed. The effects of polymer concentration, molecular weight, crosslinker ratio, ionic strength, and pH were investigated to better understand gelation behavior and performance. The formulation exhibited controlled gelation, strong resistance to temperature and CO₂, and minimal shrinkage over …

Empirical Evaluation Of Policy-Based Reinforcement Learning For Dynamic Service Control In An M/M/1 Queue, Joseph Walton

Miners Solving for Tomorrow Research Conference

While reinforcement learning has been increasingly applied to stochastic control, limited work examines policy-based methods in queuing environments modeled as semi-Markov decision processes (SMDP). This study investigates how policy-based reinforcement learning (RL) algorithms perform when applied to service rate control in an M/M/1 queue, a common queuing model for manufacturing and service systems. The problem is formulated as an SMDP in which decisions occur at each new service, allowing an agent to select different service rates from a finite set of speeds, aiming to minimize an objective function that manages system congestion and energy costs. Three policy-based reinforcement learning algorithms, …