Engineering Commons^™

Compressive Behavior Of Masonry Columns Confined With Steel Reinforced Grout (Srg) Composite, Sarah Elizabeth Jemison

Masters Theses

"In this study, a new type of composite comprised of steel fiber cords embedded in a natural hydraulic lime mortar matrix, known as steel reinforced grout (SRG), is explored for the use in confinement of masonry columns. An experimental study was carried out to understand the behavior of solid clay brick masonry columns confined by SRG jackets. Twenty-four confined and seven unconfined columns with a square cross-section were tested to failure under a monotonic concentric compressive load. Test parameters considered were the column corner condition, number of fiber jacket layers, and number of fiber overlapping faces. SRG confinement improved the …

Smart Augmented Reality Instructional System For Mechanical Assembly, Ze-Hao Lai

Masters Theses

"Quality and efficiency are pivotal indicators of a manufacturing company. Many companies are suffering from shortage of experienced workers across the production line to perform complex assembly tasks such as assembly of an aircraft engine. This could lead to a significant financial loss. In order to further reduce time and error in an assembly, a smart system consisting of multi-modal Augmented Reality (AR) instructions with the support of a deep learning network for tool detection is introduced. The multi-modal smart AR is designed to provide on-site information including various visual renderings with a fine-tuned Region-based Convolutional Neural Network, which is …

Modulated Photothermal Radiometry: Detector Sensitivity Study And Experimental Setup, Jessica Nicole Seals

Masters Theses

"This thesis outlines the development of a system used for determining the surface thermal diffusivity of both non-irradiated and irradiated materials. The motivation for this work is to establish a modulated photothermal radiometry (PTR) system on the campus of Missouri University of Science and Technology. One of the main efforts described in this thesis is the design and construction of the physical apparatus. Along the way, it was necessary to perform a detailed sensitivity analysis of the system to determine whether the expected signal emitted from the sample falls within the bounds of detectivity for the HgCdTe (MCT) detector used …

Investigation Of Proppant Static Settling Velocity In Hydraulic Fractures Using Viscoelastic Linear Gel, Vismay Manishbhai Shah

Masters Theses

"Few studies have quantified proppant transport in static conditions using actual proppant and validated previously established correlation. The objective of this study is to investigate the rheological properties of the linear gel, and determine the effect of size, shape and specific gravity of the proppant, fracture walls and rheological properties of the fluid on the proppant settling velocity in static condition and validate the previously established correlation.

Shear viscosity and dynamic frequency sweep tests were performed to investigate the viscous and viscoelastic behaviour of the HPG linear gel with five different concentrations. Proppant settling experiments were conducted with different proppant …

Hydraulic Fracture Design Optimization For Nubian Sandstone Formation In Libya, Housameddin Mohamed Sherif

Masters Theses

There is growing interest in developing unconventional oil and gas reserves in Libya, such as the tight portions of the Nubian sandstone.

Well-X7 is a development well drilled to a TD of 13,005' penetrating the Upper Nubain Sandstone (UNSS) at 12,122'-12,207' and the Lower Nubain Sandstone (LNSS) at 12,524'-12,880' KB. Based on open hole logs, the UNSS has 71 ft of net pay and the LNSS was found to have 295 ft of net pay. Openhole logs also showed low permeabilities of 2.5 and 3 md for the UNSS and LNSS, respectively. The well was initially perforated in both zones …

Development Of A Cfd Model Of The Catalytic Combustion Of A Microtube Multi-Mode Propulsion System, Andrew Paul Taylor

Masters Theses

"This thesis presents the process and results of the development of a computational fluid dynamics (CFD) model in ANSYS Fluent 18.1 on the catalytic decomposition of a novel liquid monopropellant in a microtube in order to gain deeper insights than what is available through the experimental data. The CFD model was created using the Euler- Euler Multiphase model in conjunction with the Heterogeneous Reaction submodel. Such a choice of modeling setting was backed up by theory and benchmark computations on multiphase and compressible flow, shown in Section 3 and Appendix A. It was found that the previously determined one-step reaction …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

System Level Power Integrity Transient Analysis Using A Physics-Based Approach, Jun Xu

Masters Theses

"With decreasing supply voltage level and massive demanding current on system chipset, power integrity design becomes more and more critical for system stability. The ultimate goal of well-designed power delivery network (PDN) is to deliver desired voltage level from the source to destination, in other words, to minimize voltage noise delivered to digital devices. The thesis is composed of three parts. The first part focuses on-die level power models including simplified chip power model (CPM) for system level analysis and the worst scenario current profile. The second part of this work introduces the physics-based equivalent circuit model to simplify the …

Coaxial Cable Ring Resonator Based On Pair Sided Coaxial Cable Bragg Grating Coupler For Sensing Appllication, Xiaotong Tang

Masters Theses

“Coaxial cable based devices, such as coaxial cable Bragg grating (CCBG), coiled coaxial cable resonator have been demonstrated for sensing applications to address the challenges faced by fiber optic sensors (e.g., large strain survivability, installation). Inspired by the fiber ring resonator (FRR), coaxial cable based ring resonator (CCRR) is reported in this thesis. The device mainly formed by a homemade coaxial cable Bragg grating (CCBG) pair based side coupler. Comparing to the commercial coupler, CCBG-SC improves the flexibility of the device for sensing applications. The coupling frequency of the CCBG-based coupler can be modified by changing the grating length and …

Development Of Hollow Coaxial Cable Fabry Perot Resonator For High Temperature Sensing Applications, Mohammed Farhan Ahmed

Masters Theses

"The thesis is comprised of two papers, the first paper presents the novel High-Quality Factor Coaxial Cable Fabry-Perot Resonator for sensing applications. The sensor is fabricated by creating two highly reflective mirrors in a coaxial cable. The temperature response of the sensor was tested, by monitoring the frequency shift of the reflection spectra as the temperature increased linearly from 35 °C to 80 °C in steps of 5 °C. The sensor exhibited high temperature sensitivity and good measurement resolution.

A high Q factor of 133 was recorded. The second paper in the thesis presents a low cost, robust, homemade hollow …

Ceria Nanostructured Catalysts For Conversion Of Methanol And Carbon Dioxide To Dimethyl Carbonate, Jawad Hassan A Al Drwish

Masters Theses

"In this study, three different shapes of ceria (CeO₂) nanostructures (e.g., nanooctahedra, nanocubes and nanorods) were synthesized via the hydrothermal method and screened for carbonylation reaction. Of these three shapes of nanostructures, the nanorod was doped with metals such as Ca, Ni, Cu, and Co by wet impregnation method. All materials were characterized by XRD, NH₃/CO₂-TPD, XRF, FTIR and N₂ physorption to determine the crystal size and phases, acid-base properties, metal loading, and surface properties. The obtained materials were employed as catalysts for the activation of Carbon Dioxide (CO₂) and methanol …

Cyclic Axial Compression Behavior Of Concrete-Filled Hybrid Large Rupture Strain Frp Tubes, Monika Nain

Masters Theses

"This study introduces an experimental investigation of the behavior of concrete filled fiber reinforced polymer (FRP) tubes (CFFTs) under cyclic axial compression. The FRP used in this study were either small rupture strain FRP (SRS-FRP) or large rupture strain FRP (LRS-FRP). This paper also presents the first-ever experimental study on the behavior of concrete confined using hybrid LRS-FRP and SRS-FRP. LRS-FRP included PEN (polyethylene napthalate) and PET (polyethylene terephthalate) where both of them having ultimate axial strain larger than 5%, and low stiffness. SRP-FRP included carbon and glass FRP having small rupture strains, smaller than 2%, and high stiffness. The …

Corrosion Performance Of Zirconium-Based Passivations On Electroplated Zinc Nickel, Madison Morgan Reed

Masters Theses

“Performance requirements for Department of Defense (DoD) electrical components include corrosion and electrical contact resistance. Historically, electroplated cadmium with a chromate conversion coating (CrCC) has been used to meet corrosion and contact resistance standards. However, replacements are needed for these materials because they are toxic and carcinogenic. Electroplated γ-ZnNi has been identified as an acceptable alternative to Cd. This study evaluated commercially available Zr-based thin films and sealers as passivations for potential replacement of CrCCs. Ten different passivations were tested and compared with bare γ-ZnNi. X-Bond and Zircobond passivations were found to provide some improvement to the bare ZnNi corrosion …

Epithelium Detection And Cervical Intraepithelial Neoplasia Classification In Digitized Histology Images, Sri Venkata Ravitej Addanki

Masters Theses

“Cervical cancer is one of the most deadly cancers faced by women. It is the second leading cause of cancer death in women aged 20 to 39 years. In order to detect cancer at early stages, pathologists analyze the epithelium region from the cervical histology images. These histology images have a pre-cervical cancer condition called cervical intraepithelial neoplasia (CIN) determined by pathologists. This study deals with automating the process of epithelium detection and epithelium CIN classification in digitized histology images. For epithelium detection, the objective is to detect epithelium regions in microscopy images from non-epithelium regions and background. convolutional neural …

Numerical And Experimental Analysis Of Local Buckling Of Axially Loaded Steel Tubes Confined By Concrete And Frp, Nicholas Colbert

Masters Theses

“The hollow core Fiber-Reinforced-Polymer (FRP) concrete circular-steel (HC-FCS) column consists of an outer circular fiber reinforced polymer (FRP) tube, an inner thin-walled circular steel tube concentrically aligned, and a concrete shell between them. Research has been performed on the performance of the member as a whole, but to date, there has been no investigation into the behavior of the steel tube confined in the column. 17 small-scale columns were tested under axisymmetric axial compressions applied directly to the steel tube under displacement control. The conducted parametric study examined the effects of diameter-to-thickness (D/t) ratio, concrete unconfined compressive strength, FRP thickness, …

Thermal Curing Efficiency Of Geopolymer Mortars, Simon Peter Sargon

Masters Theses

”Missouri is the fourth largest coal consumer in the U.S. with coal-fired power plants generate 81.3% of the electricity in the state which generate about 2.7 million tons of coal combustion residuals (CCRs) annually. The CCR, including fly ash, disposal issue is not limited to Missouri, rather it is a national issue with CCRs being the second largest waste stream in the U.S. Ninety million tons of fly ash are stored in landfills and ash ponds annually. Hence, using this waste product effectively is necessary. One of the emerging applications of fly ash is to use it as binder in …

Multiscale Approaches Toward Advanced Lithium-Ion Battery: From Nano To Meso Scale, Susmita Sarkar

Masters Theses

“Battery performance and its degradation are determined by various aspects such as the transport of ions and electrons through heterogeneous internal structures composed of constituent particles, kinetic reactions at the interfaces, and a corresponding interplay between mechanical, chemical, and thermal responses. Further, modern battery materials require a variety of engineering processes such as coating, doping and mixing. As a result, in order to fully understand the behavior of the battery material and improve battery performance, it is necessary to understand and control the individual particle behavior and then connect it to the electrode. This study elucidated the physical phenomena associated …

Laser-Aided Additive Manufacturing Of Glass, John Michael Hostetler

Masters Theses

“This thesis presents various approaches for the laser-aided additive manufacturing of glass. First, a technique is investigated to create free-form, low to zero coefficient of thermal expansion structures out of silica-gel. A CO₂ laser was coupled through a gantry system and focused onto a binder-free silica-gel powder bed (15-40 μm particles). Prior to writing each layer, powder is dispensed by sifting it onto the build platform as opposed to a conventional wiper system, avoiding contacting and potentially damaging sensitive parts. After deposition, the parts are annealed in a furnace to increase their strength. The influence of various process parameters …

Including Topographical Effects In Slant-Range Modeling, Kari C. Ward, Kyle J. Demarsy

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Spacecraft descent-to-landing navigation often includes the use of a slant-range measurement, the distance from the spacecraft to a surface along the off-nadir pointing direction of the sensor. Modeling a slant range sensor requires a reference surface, approximations of which include spherical and ellipsoidal surfaces, spherical harmonic models, and topographical maps based on prior reconnaissance data. For the spherical and ellipsoidal reference surfaces, a closed-form solution of the slant-range measurement exists. However, these approaches are inaccurate with respect to the true surface. This paper develops a method to implement digital elevation maps of a given surface to create a topography-based model …

Electric Solid Propellant Ablation In A Pulsed Electric Thruster, Matthew S. Glascock, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric solid propellants are advanced solid chemical rocket propellant that can be controlled (ignited, throttled and extinguished) with electric current. Work reported here focuses on application of electric solid propellant in a pulsed electric thruster similar to a pulsed plasma thruster. In the future it may be possible to develop a dual-mode electric solid propellant thruster that is switchable between steady applied electric current chemical mode and pulsed alternating electric current electric mode. Results presented here use a laboratory test thruster to create an arc discharge of 5-20 J per pulse in a cylindrical cavity of propellant. Results for Teflon …

Square-Root Consider Filters With Hyperbolic Householder Reflections, James S. Mccabe, Kyle J. De Mars

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Maintaining positive definiteness of a filter's error covariance estimate is of paramount importance to any stable and reliable estimation scheme. Two widely used methods for protecting a filter from loss of positive-definiteness are that of consider filtering and square-root filtering. Despite their widespread use in estimation applications, a filtering methodology that combines the two techniques has yet to be presented in a unified, streamlined architecture. This paper develops a new approach to square-root filtering using hyperbolic Householder reflections. A specialization of the method is considered to permit computationally efficient applications, and a numerical example pertaining to a ballistic reentry is …

Boundary-Layer Separation Control Using Laser-Induced Air Breakdown, Alfram Bright, Nathan Tichenor, Kevin Kremeyer, Richard Wlezien

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Modification of the flow separation characteristics of a laminar airfoil using a remotely located high-power laser was experimentally investigated in a low-speed, low-turbulence wind tunnel. A laminar airfoil model (chord length of 500 mm) was designed and fabricated to emulate the flight characteristics of a small aircraft. At 0 deg angle of attack, the airfoil model was determined to have an incipient laminar separation bubble on its lifting surface between 67 and 80% chord. A strong laser-induced breakdown was generated 2 mm upstream of the leading edge by focusing a collimated beam emitted from a 900 mW laser at 1064 …

Application Of Improved Fast Dynamic Allan Variance For The Characterization Of Mems Gyroscope On Uav, Qian Zhang, Xueyun Wang, Shiqian Wang, Chaoying Pei

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Microelectromechanical systems (MEMS) are core components in unmanned aerial vehicles (UAV). The precision of MEMS sensors is very important when the GPS signal is invalid. However, the precision and performance of MEMS sensors will be degraded by the changing of environment. Therefore, estimation and identification of the various noise terms existing in MEMS sensors are deemed to be necessary. The Allan variance is a common and standard method to analyze MEMS sensors, but it cannot be used to analyze the dynamic characteristics. The dynamic Allan variance (DAVAR) is a sliding version of the Allan variance. It is a practical tool …

A Constitutive Model For Entangled Polydisperse Linear Flexible Polymers With Entanglement Dynamics And A Configuration Dependent Friction Coefficient. Part I: Model Derivation, David W. Mead, Saman Monjezi, Joontaek Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

A new polydisperse "toy" constitutive model is derived and developed from fundamental principles and ideas governing the nonlinear rheology of linear flexible polymers [Mead et al., J. Rheol. 59, 335-363 (2015)]. Specifically, the new model is comprised of four fundamental pieces. First, the model contains a simple differential description of the entanglement dynamics of discrete entanglement pairs. Second, the model contains a differential description of the ij entanglement pair orientation tensor dynamics. Third, following a similar development by Mead and Mishler [J. Non-Newtonian Fluid Mech. 197, 61-79 and 80-90 (2013).], a diluted stretch tube is constructed to describe the relative …

A Constitutive Model For Entangled Polydisperse Linear Flexible Polymers With Entanglement Dynamics And A Configuration Dependent Friction Coefficient. Part Ii. Modeling "Shear Modification" Following Cessation Of Fast Shear Flows, David W. Mead, Saman Monjezi, Joontaek Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

The polydisperse Mead-Park (MP) "toy" molecular constitutive model developed in Paper I [Mead et al., J. Rheol. 62, 121-134 (2017)] as well as our previously published work [e.g., J. Rheol. 59, 335-363 (2015)] is used in the "forward" direction to study model polydisperse melts of entangled linear flexible polymers in severe, fast shear flows. The properties of our new model are elucidated by way of numerical simulation of a representative model polydisperse polymer melt in step shear rate and interrupted shear flow. In particular, we demonstrate how the MP model simulates the individual molecular weight distribution (MWD) component dynamics as …

Multi-Objective Optimal Battery Placement In Distribution Networks, Kiana Khalilnejad

Masters Theses

"Due to high penetration of renewable energy resources in today's electricity generation, considerable voltage fluctuations are witnessed in power systems. As an attempt to solve this issue, in this study, multi-objective optimal placement and sizing of distribution-level battery storage system is performed using semidefinite programing. Placement of one or multiple battery system is studied under various objectives including the cost, voltage regulation, reactive power dispatch, renewable resource curtailment, and minimum network power losses. Power flow equations are solved in the form of semidefinite constraints and the rank constraint is ignored. Additionally, combination of these objectives to form a multi-objective problem …

Analyzing Sensor Based Human Activity Data Using Time Series Segmentation To Determine Sleep Duration, Yogesh Deepak Lad

Masters Theses

"Sleep is the most important thing to rest our brain and body. A lack of sleep has adverse effects on overall personal health and may lead to a variety of health disorders. According to Data from the Center for disease control and prevention in the United States of America, there is a formidable increase in the number of people suffering from sleep disorders like insomnia, sleep apnea, hypersomnia and many more. Sleep disorders can be avoided by assessing an individual's activity over a period of time to determine the sleep pattern and duration. The sleep pattern and duration can be …

Outsmart Moore’S Law With Machine Learning, Dustin Tanksley, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Over the last half century, computing has transformed most aspects of society due to a rapid increase in computation power. With the possible end of Moore’s Law in sight, much of this growth could come to an end. This paper will discuss why machine learning will continue growing even after Moore’s Law, and demonstrate why it is a great time to enter the field.

Ferrite Assisted Geometry-Conformal Magnetic Induction Antenna And Subsea Communications For Auvs, Debing Wei, Li Yan, Xuanheng Li, Jie Wang, Jiefu Chen, Miao Pan, Yahong Rosa Zheng

Electrical and Computer Engineering Faculty Research & Creative Works

This paper designs a novel geometry-conformal antenna for Magnetic Induction (MI)-based subsea wireless communications for autonomous underwater vehicles (AUV). The designed tri-directional antennas can be wrapped directly on the surface of AUVs, such that the AUVs fluid dynamics are well maintained to ensure power efficiency of the vehicles. In addition, ferrite materials are added between the MI antenna and the metallic body surface of the AUVs to overcome the shielding effect and enhance the MI signal strength. The designed MI communication system is implemented in hardware and the effectiveness of the geometry-conformal MI antenna is demonstrated through COMSOL simulations and …

Advanced Ion Management To Improve Oil Recovery In Oil-Wet Carbonate-Sandstone Composite Reservoirs, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Waterflooding with different ionic composition called advanced ion management which play a role with ionic composition of injected water to enhance the oil production. In the last decade, many studies pointed out that the composition of injected water could changes rock wettability during waterflooding. The main purpose of this study is to evaluate the effects of SO4 and low salinity water on improving oil recovery in oil-wet carbonate reservoirs. Sulfate ion concentration, low salinity water, rock composition, porosity, and permeability were examined using a designed model. Typical seawater, increase SO₄, two and three times in the seawater, and …