Engineering Commons^™

Rupture Of A Cryogenic Composite Overwrapped Pressure Vessel Following A High-Speed Particle Impact, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A primary spacecraft design consideration is the anticipation and mitigation of the possible damage that might occur in the event of an on-orbit micro-meteoroid or orbital debris (MMOD) particle impact. While considerable effort has been expended in the study of non-pressurized spacecraft components under room temperature conditions to MMOD impacts, technical and safety challenges have limited the number of tests that have been conducted on pressurized elements of such spacecraft, especially under cryogenic conditions. This paper presents the development of a data-driven equation for composite material pressure vessels under cryogenic operating conditions that differentiate between impact conditions that, given a …

Deep Learning Nuclei Detection In Digitized Histology Images By Superpixels, Sudhir Sornapudi, R. Joe Stanley, William V. Stoecker, Haidar Almubarak, Rodney Long, Sameer Antani, George Thoma, Rosemary Zuna, Shelliane R. Frazier

Electrical and Computer Engineering Faculty Research & Creative Works

Background: Advances in image analysis and computational techniques have facilitated automatic detection of critical features in histopathology images. Detection of nuclei is critical for squamous epithelium cervical intraepithelial neoplasia (CIN) classification into normal, CIN1, CIN2, and CIN3 grades.

Methods: In this study, a deep learning (DL)-based nuclei segmentation approach is investigated based on gathering localized information through the generation of superpixels using a simple linear iterative clustering algorithm and training with a convolutional neural network.

Results: The proposed approach was evaluated on a dataset of 133 digitized histology images and achieved an overall nuclei detection (object-based) accuracy of 95.97%, with …

Characterizing The Influence Of Matrix Ductility On Damage Phenomenology In Continuous Fiber-Reinforced Thermoplastic Laminates Undergoing Quasi-Static Indentation, A. Yudhanto, H. Wafai, G. Lubineau, R. Yaldiz, N. Verghese

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The use of thermoplastic matrix was known to improve the impact properties of laminated composites. However, different ductility levels can exist in a single family of thermoplastic matrix, and this may consequently modify the damage phenomenology of thermoplastic composites. This paper focuses on the effect of matrix ductility on the out-of-plane properties of thermoplastic composites, which was studied through quasi-static indentation (QSI) test that may represent impact problem albeit the speed difference. We evaluated continuous glass-fiber reinforced polypropylene thermoplastic composites (GFPP), and selected homopolymer PP and copolymer PP that represent ductile and less ductile matrices, respectively. Several cross-ply laminates were …

Molecular Simulation Of Steady-State Evaporation And Condensation In The Presence Of A Non-Condensable Gas, Zhi Liang, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Molecular Dynamics Simulations, We Study Evaporation and Condensation of Fluid Ar in the Presence of a Non-Condensable Ne Gas in a Nanochannel. the Evaporation and Condensation Are Driven by the Temperature Difference, ΔTL, between the Evaporating and Condensing Liquid Surfaces. the Steady-State Evaporation and Condensation Fluxes (JMD) Are Also Affected by the Ne Concentration, ΡNe, and the Nanochannel Length. We Find that Across a Wide Range of ΔTL and ΡNe, JMD is in Good Agreement with the Prediction from Stefan's Law and from Schrage Relationships. Furthermore, for ΔTL Less Than ∼20% of the Absolute Average Temperature, We Find that …

Thermal Analysis Of Cold-Formed Steel Wall Assemblies, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

For building envelope assemblies, thermal bridging through conductive components can greatly reduce the overall thermal resistance of that assembly. Steel stud assemblies are particularly susceptible to thermal bridging due to the high thermal conductivity of the steel components. Being able to accurately capture these impacts can provide designers with more realistic information to drive better design decisions in regards to building thermal performance and building energy use.

The American Iron and Steel Institute (AISI) is developing a simplified calculation methodology for determining the thermal performance of generic steel stud assemblies that includes the impacts of thermal bridging. While hot-box testing …

Electro-Kinetic Remediation Processes -- A Brief Overview And Selected Applications, Chandra Mouli Tummala, Sanjay Tewari

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this growing world the need for in-situ remediation has grown importance for various reasons. In-situ remediation is the application of remediation in the subsurface – as compared to ex-situ remediation, which applies to media readily accessible above ground and many times involves excavation and disruption of the soil. In-situ remediation may be applied in the unsaturated/vadoze zone or in saturated soils and groundwater. Anthropogenic activities (municipal and industrial) have resulted in contamination in subsurface soil/water environment. There are several in-situ remediation methods for example bio-remediation, thermal desorption, soil vapor extraction, and soil flushing just to name a few.

The …

On The Soil Water Characteristic Curves Of Poorly Graded Granular Materials In Aqueous Polymer Solutions, Junnan Cao, Jongwon Jung, Xiaoyu Song, Bate Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Tempe cell with a self-developed horizontal hanging column attachment was used to measure the soil water characteristic curves (SWCCs) of granular materials initially saturated with either water or polymer solutions. For SWCCs of six poorly graded granular materials with d50 ranging from 0.04 to 0.7 mm in water, it was found that (1) as grain size decreases, air entry value increases, and matric suction (ψ) for the funicular and pendular regimes increases and that (2) steep desaturation curves over narrow ψ range in the funicular regime were observed. Air entry values obtained from the fitting parameter 1/α in van Genuchten …

Camks Support Development Of Acute Myeloid Leukemia, Xunlei Kang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Background: We recently identified the human leukocyte immunoglobulin-like receptor B2 (LILRB2) and its mouse ortholog-paired Ig-like receptor (PirB) as receptors for several angiopoietin-like proteins (Angptls). We also demonstrated that PirB is important for the development of acute myeloid leukemia (AML), but exactly how an inhibitory receptor such as PirB can support cancer development is intriguing. Results: Here, we showed that the activation of Ca (2+)/calmodulin-dependent protein kinases (CAMKs) is coupled with PirB signaling in AML cells. High expression of CAMKs is associated with a poor overall survival probability in patients with AML. Knockdown of CAMKI or CAMKIV decreased human acute …

Phytoforensics: Trees As Bioindicators Of Potential Indoor Exposure Via Vapor Intrusion, Jordan L. Wilson, V. A. Samaranayake, Matt A. Limmer, Joel Gerard Burken

Mathematics and Statistics Faculty Research & Creative Works

Human exposure to volatile organic compounds (VOCs) via vapor intrusion (VI) is an emerging public health concern with notable detrimental impacts on public health. Phytoforensics, plant sampling to semi-quantitatively delineate subsurface contamination, provides a potential non-invasive screening approach to detect VI potential, and plant sampling is effective and also time- and cost-efficient. Existing VI assessment methods are time- and resource-intensive, invasive, and require access into residential and commercial buildings to drill holes through basement slabs to install sampling ports or require substantial equipment to install groundwater or soil vapor sampling outside the home. Tree-core samples collected in 2 days at …

Raman Spectroscopy Predicts The Link Between Claw Keratin And Bone Collagen Structure In A Rodent Model Of Oestrogen Deficiency, M. Clare Caraher, Antonia Sophocleous, J. Renwick Beattie, Olive O'Driscoll, Niamh M. Cummins, Orlaith Brennan, Fergal J. O'Brien, Stuart H. Ralston, Steven E.J. Bell, Mark R. Towler, Aymen I. Idris

Chemical and Biochemical Engineering Faculty Research & Creative Works

Osteoporosis is a common disease characterized by reduced bone mass and an increased risk of fragility fractures. Low bone mineral density is known to significantly increase the risk of osteoporotic fractures; however, the majority of non-traumatic fractures occur in individuals with a bone mineral density too high to be classified as osteoporotic. Therefore, there is an urgent need to investigate aspects of bone health, other than bone mass, that can predict the risk of fracture. Here, we successfully predicted association between bone collagen and nail keratin in relation to bone loss due to oestrogen deficiency using Raman spectroscopy. Raman signal …

Focus Energy Determination Of Mining Microseisms Using Residual Seismic Wave Attenuation In Deep Coal Mining, Mingwei Zhang, Shengdong Liu, Shuzhao Chen, Yanlong Chen, Guang Xu, Deyu Qian

Mining Engineering Faculty Research & Creative Works

Based on the energy attenuation characteristics of residual wave in deep rock, a method was developed to determine the microseismic focus energy. Differential energy loss in infinitesimal spreading distance is logically deduced, upon which energy attenuation equation was established. With a logarithmic transformation, a linear relation of the residual seismic energy with distance is formulated. Its intercept was used to determine the microseismic focus energy. The result is compared with that determined by the energy density method. The reliability of the determined focus energy and the impact of the built-in velocity threshold on the residual wave energy computation are discussed. …

Probing Changes In Tilt Angle With 20 Nanoradian Resolution Using An Extrinsic Fabry-Perot Interferometer-Based Optical Fiber Inclinometer, Yiyang Zhuang, Yizheng Chen, Chen Zhu, Rex E. Gerald Ii, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we introduce and demonstrate a novel optical fiber extrinsic Fabry-Perot interferometer (EFPI) for tilt measurements with 20 nrad resolution. Compared with inline optical fiber inclinometers, an extrinsic sensing structure is used in the inclinometer reported herein. Our design greatly improves on the tilt angle resolution, the temperature stability, and the mechanical robustness of inclinometers with advanced designs. An EFPI cavity, which is formed between endfaces of a suspended rectangular mass block and a fixed optical fiber, is packaged inside a rectangular container box with an oscillation dampening mechanism. Importantly, the two reflectors of the EFPI sensor remain …

The Bridge Newsletter Spring 2018, Missouri University Of Science And Technology

The Bridge Newsletter

-Steel Bridge Design Team takes first at ASCE student conference
-Sneed helps lead study abroad course
-ACML gifts
-Schonberg named Fulbright Chair

Recent Advances In Study Of Solid-Liquid Interfaces And Solidification Of Metals, Mohsen Asle Zaeem

Materials Science and Engineering Faculty Research & Creative Works

Solidification occurs in several material processing methods, such as in casting, welding, and laser additive manufacturing of metals, and it controls the nano- and microstructures, as well as the overall properties of the products. Recent advancements in experimental and computational modeling techniques have made it possible to more effectively study atomistic and microscale mechanisms that control the solidification nano- and microstructures, and formation and evolution of solidification defects.

Spatial Delineation Of Corrosion Zones For Metal Culverts Based On Coastal Louisiana Soil Characteristics, Sanjay Tewari, Francis Manning

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Corrosion of metal pipes used as culverts is a problem that affect many agencies directly involved in designing and maintaining these culverts. The corrosive environment of soil types found in a region could vary in a significant way (mildly corrosive to extremely corrosive) based on soil characteristics. Environmental conditions such as high water table, acidity and presence of various salts could make a soil corrosive to metal pipes. In this article, authors have applied a methodology of processing readily available soil data such as spatial distribution of soil types and soil characteristics (e.g. pH and conductivity) in delineating spatial corrosion …

Seismic Performance Of Hollow-Core Hc-Fcs Columns Having Inner Steel Tube With High Diameter To Thickness Ratio, Mohanad M. Abdulazeez, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper experimentally investigates the seismic behavior of a large-scale hollow-core fiber-reinforced polymer-concrete-steel HC-FCS column under seismic cyclic loading. The HC-FCS column consisted of a concrete shell sandwiched between an outer fiber-reinforced polymer (FRP) tube and an inner steel tube. The FRP tube provides continuous confinement for the concrete shell along the height of the column while the steel tube provides the required flexural strength. The tested column has an inner steel tube that had a diameter-to-thickness ratio (D_i/t) (of 254. The seismic performance of the precast HC-FCS column was compared to that of HC-FCS column having(D_{i …}

Nano-Graphene Oxide And Vitamin D Delivery, Reza Mahdavi, Mehran Solati-Hashjin, Meisam Omidi, Arash Khojasteh, Fateme Fayyazbakhsh

Mechanical and Aerospace Engineering Faculty Research & Creative Works

One of the Most Interesting and Recent Insights into Biomimetic Scaffold Nano-Biomaterial is Smart Scaffolding with Targeted Drug Delivery Ability. in Recent Decades, the Use of Graphene-Based Materials, Such as Nano-Graphene Oxide (NGO), as a Drug Carrier with Amphiphilic Properties, Has Attracted Considerable Attention of Scientists and Researchers in This Field. in Addition, One of the Important Global Problems is Increased Vitamin D Deficiency, Particularly in Pregnant and Postmenopausal Women. Therefore, in This Work, by Considering Hydrophobic Properties of Vitamin D, We Attempted to Examine its Loading and Release Both in the Presence of Surfactant and Surfactant-Free NGO-Aqueous Solution. at …

Multifunctional Cerium-Based Nanomaterials And Methods For Producing The Same, Matthew O'Keefe, William Fahrenholtz, Carlos E. Castano Londono

Materials Science and Engineering Faculty Research & Creative Works

Embodiments relate to a cerium-containing nano-coating composition, the composition including an amorphous matrix including one or more of cerium oxide, cerium hydroxide, and cerium phosphate; and crystalline regions including one or more of crystalline cerium oxide, crystalline cerium hydroxide, and crystalline cerium phosphate. The diameter of each crystalline region is less than about 50 nanometers.

Specific Nanoporous Geometries On Anodized Alumina Surfaces Influence Astrocyte Adhesion And Glial Fibrillary Acidic Protein Immunoreactivity Levels, D. Ganguly, C. D.L. Johnson, M. K. Gottipati, D. Rende, D. A. Borca-Tasciuc, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electrodes implanted in the brain or spinal cord trigger the activation of resident astrocytes. In their reactive state, astrocytes surrounding the electrode form a glial scar, compromising the ability of the electrode to interface with the surrounding neural tissue. One approach to reduce the inhibiting scar tissue is to incorporate nanoarchitecture on the surface of the implanted materials to modify the astrocytic response. The incorporated nanoarchitecture changes both the surface characteristics and the material properties of the implant interface. We investigated the response of rat cortical astrocytes to nanoporous anodic aluminum oxide (AAO) surfaces. Astrocytes were seeded onto nonporous aluminum …

2018 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Enhancing The Crumb Rubber Modified Asphalt's Storage Stability Through The Control Of Its Internal Network Structure, Mohyeldin Ragab, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The current research investigated the effect of the internal network structure developed in the crumb rubber modified asphalt (CRMA) on its storage stability. The authors investigated the influence of asphalt-crumb rubber modifier (CRM) interaction parameters (interaction time, interaction speed, and interaction temperature) on the development of the internal network structure in CRMA. The authors found that the existence of three dimensional (3D) network structures in the CRMA enhanced its storage stability. Fourier Transform Infrared (FTIR) Spectroscopy was utilized to determine the nature of CRM components responsible for the development of 3D network structure in the liquid phase of CRMA. This …

Inspire Newsletter Spring 2018, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

A Rupture Limit Equation For Pre-Loaded Composite Plates, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fiber-reinforced polymer composites offer inherent advantages over traditional metallic materials in a number of different ways; however, these materials are also highly susceptible to impact damage. In this paper, we explore the response of FRP (fiber reinforced polymer) composites under impact conditions that could result in their rupture or catastrophic failure. The work performed was aimed at developing a general, data-driven equation for initially-stressed, flat, composite plates that would differentiate between impact conditions that would result in only a hole or crack and those which would cause catastrophic plate failure or rupture. If this equation were to be subsequently shown …

Failure Of The Alexander Dam Embankment And Reconstruction Using Drainage Mitigation On Kauai, Hawaii, 1930-1932, Kerry D. Cato, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Alexander Dam is a hydraulic fill earth dam and the second-highest embankment dam in Hawaii, having been built in 1929-1932 on the south side of the Hawaiian island of Kauai to provide irrigation for McBryde Sugar Company Ltd. It was constructed across Wahiawa Stream mauka (Hawaiian for "stream that comes from the mountains," literally "toward the mountains"), upstream of Kalaheo, to store 800 million gallons (5 million m3) of water to irrigate sugarcane fields. The embankment dam was intended to have a maximum height of 125 ft (38 m), a crest length of 620 ft (189 m), and a maximum …

Partitioning Of Pcbs From Air To Clothing Materials In A Danish Apartment, Glenn Morrison, H. V. Andersen, L. Gunnarsen, D. Varol, E. Uhde, B. Kolarik

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Polychlorinated biphenyl (PCB) contamination of buildings continues to pose an exposure threat, even decades after their application in the form of calks and other building materials. In this research, we investigate the ability of clothing to sorb PCBs from contaminated air and thereby influence exposure. The equilibrium concentration of PCB-28 and PCB-52 was quantified for nine used clothing fabrics exposed for 56 days to air in a Danish apartment contaminated with PCBs. Fabric materials included pure materials such as cotton and polyester, or blends of polyester, cotton, viscose/rayon, and/or elastane. Air concentrations were fairly stable over the experimental period, with …

Inspire Newsletter Fall 2018, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Testing And Evaluation Of Shale Stability For Zubair Shale Formation, Ahmed K. Abbas, Ralph E. Flori, Ahmed Al-Anssari, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Zubair Formation consists of approximately 55% shale, which causes almost 70% of wellbore problems due to incompatibilities of drilling fluids and shale formations. The most common and effective solution to shale instability is through the design and selection of drilling fluids. Understanding the interaction between drilling fluids and shale has been a challenge due to the complexity of both physical and chemical variations in shale formations. This paper presents some of the important laboratory and well-site testing techniques that are often used by mud engineers for characterizing and remediating drilling fluids and shale interaction. Well-preserved shale samples were analyzed to …

John Frank Stevens: Panama Canal Mastermind And Pioneering Railroad Pathfinder, J. David Rogers, Lawrence M. Magura

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

John Frank Stevens began his civil engineering career as a rodman on a survey crew in Maine in 1872. He soon moved to Minneapolis, where he apprenticed himself, eventually becoming Assistant City Engineer. In 1876 he began working for railroads in the western United States. In 1882 Stevens began working for a contractor laying tracks for the Canadian Pacific Railroad in Saskatchewan. The next spring he became assistant engineer of location for the Canadian Pacific, completing the first transcontinental line linking Montreal with Vancouver in 1888. In 1889 James Jerome Hill retained Stevens as chief pathfinder for the new Great …

Enhancement Of Performance Of Micro Direct Ethanol Fuel Cells By Structural Modification, Sindhuja Valluri

Masters Theses

“Direct Ethanol Fuel Cells (DEFC’s) are becoming more important in current energy conversion devices because of their higher efficiency compared to other fuel cells. However, the performance of current DEFC’s is not efficient in providing energy to meet increasing energy demand. The objective of this work is to make the cell compact and at the same time improve performance. For this purpose, we have removed gasket and endplates to make structure compact and increased surface area by developing a new corrugated structure. This work also uses 3D printing technology Fused Deposition Modeling (FDM) to make pocket backing case to improve …

Soy-Based Polyurethane Foam For Insulation And Structural Applications, Gurjot S. Dhaliwal

Doctoral Dissertations

"Polyurethane (PU) foams are widely used as insulation materials due to their high insulation properties and low cost compared to conventional materials such as styrene and mineral wool. PU foams are traditionally fabricated with petroleum-based precursors. However, high crude price and higher carbon footprint has lead interest of researchers to synthesis PU foams using plant-based raw materials, that are inexpensive and renewable. In this dissertation, PU foams were fabricated using soy-based polyol and its thermal and mechanical properties were investigated. In the first part, of PU foam samples with different formulations were fabricated using soy-based polyol HB230, and varying amounts …