Engineering Commons^™

Effect Of Addition Of Nano Silicon Dioxide To Cement Bricks: Preparation And Characterictics, Rehab Emad, Ibrahim M. Ibrahim, M. A. Radwan, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

The aim of the research is to design and produce a durable, and high load, bearing build constructing bricks based on cement, sand, and aggregates with the addition of Nano silica, studying the effect of the added materials to get a background about the impact of the Nano silica on the ability of using such a product. The cement used is 52.5 grade which represent the strength of the cement, sand with particle size 300-600 micrometer, aggregates with diameter lays between 0.5-1 cm better to use smaller size, water, and finally Nano-silica with particle size 17 nm with purity higher …

Self-Adhesive Silicone Microstructures For The Treatment Of Tympanic Membrane Perforations, Gabriela Moreira Lana, Katharina Sorg, Gentiana Ioana Wenzel, Dietmar Hecker, René Hensel, Bernhard Schick, Klaus Kruttwig, Eduard Arzt

Chemical and Biochemical Engineering Faculty Research & Creative Works

Inspired by the gecko foot, polymeric microstructures have demonstrated reliable dry adhesion to both stiff objects and sensitive surfaces such as skin. Microstructured silicone patches are proposed, herein, for the treatment of tympanic membrane perforations with the aim of serving as an alternative for current surgical procedures that require anesthesia and ear canal packing. Sylgard 184 PDMS micropillars of 20 μm in diameter and 60 μm in length are topped by a Soft Skin Adhesive (SSA) MG7-1010 terminal layer, of about 25 μm thickness. The adhesion is evaluated by specially designed tack tests against explanted murine eardrums and, for comparison, …

A Novel Laser-Aided Machining And Polishing Process For Additive Manufacturing Materials With Multiple Endmill Emulating Scan Patterns, Mohammad Masud Parvez, Sahil Patel, Sriram Praneeth Isanaka, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In additive manufacturing (AM), the surface roughness of the deposited parts remains significantly higher than the admissible range for most applications. Additionally, the surface topography of AM parts exhibits waviness profiles between tracks and layers. Therefore, post-processing is indispensable to improve surface quality. Laser-aided machining and polishing can be effective surface improvement processes that can be used due to their availability as the primary energy sources in many metal AM processes. While the initial roughness and waviness of the surface of most AM parts are very high, to achieve dimensional accuracy and minimize roughness, a high input energy density is …

Coupled Flexural‐Electrical Evaluation Of Additively Manufactured Multifunctional Composites At Ambient Temperature, Ritesh Ghimire, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multifunctional composites offer a higher strength to weight ratio, electrical properties, etc., thereby providing possible solutions for replacing the physical electrical wirings in aircraft. The lack of research on the coupled multifunctional characterization of 3D printed composites flexural-electrical properties is the main reason for its unsuitability in aerospace applications. The proposed method evaluates multifunctional flexural‐electrical properties of 3D printed multifunctional carbon fiber composites. Traditional methods for conducting structural and electrical analyses for aircraft certification do not accommodate new technologies that are not yet proven. Such technologies are additive manufacturing (AM) techniques, multifunctional composite structures, and the certification requirements for 3D …

Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

With the demand for conformance control in carbon dioxide (CO₂) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields for CO₂ conformance control. However, the field application results are mixed with success and failure. This paper is intended to understand the HPAM-Cr (III) polymer gel plugging performance in CO₂ flooding reservoirs through laboratory experiments and numerical analysis. We conducted core flooding tests to understand how the cycles of CO₂ and water affect the HPAM-Cr (III) polymer gel plugging efficiency to CO₂ and water during a water-alternating-gas (WAG) process. Berea Sandstone …

Cement Bricks Based On Shredded Automobile Tires, Nour Waheed, Ibrahim M. Ibrahim, M. A. Radwan, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

The essential target of this is to make good, qualified bricks with economic background and to have several uses than ordinary brick that is utilized in construction of homes or any building. From these useful properties of those blocks are acoustic segregation and thermal insulation also with recovery of many wastes that don’t be benefit from them; create from them jobs to be reused and to make brick economically wise and to be applied for example the insulation. From those squandering, are the shredded used tires after being used and it can’t be used anymore. It was cleared that the …

Cochlear Inflammaging In Relation To Ion Channels And Mitochondrial Functions, Parveen Bazard, Jennifer Pineros, Robert D. Frisina, Mark A. Bauer, Alejandro A. Acosta, Lauren R. Paganella, Dominika Borakiewicz, Mark Thivierge, Freyda L. Mannering, Xiaoxia Zhu, Bo Ding

Chemical and Biochemical Engineering Faculty Research & Creative Works

The slow accumulation of inflammatory biomarker levels in the body—also known as inflammation—has been linked to a myriad of age-related diseases. Some of these include neurodegenerative conditions such as Parkinson's disease, obesity, type II diabetes, cardiovascular disease, and many others. Though a direct correlation has not been established, research connecting age-related hearing loss (ARHL)—the number one communication disorder and one of the most prevalent neurodegenerative diseases of our aged population—and inflammation has gained interest. Research, thus far, has found that inflammatory markers, such as IL-6 and white blood cells, are associated with ARHL in humans and animals. Moreover, studies investigating …

Fibrin Gel Enhances The Antitumor Effects Of Chimeric Antigen Receptor T Cells In Glioblastoma, Edikan A. Ogunnaike, Alain Valdivia, Mostafa Yazdimamaghani, Ernesto Leon, Seema Nandi, Hannah Hudson, Hongwei Du, Simon Khagi, Zhen Gu, Barbara Savoldo, Frances S. Ligler, Shawn Hingtgen, Gianpietro Dotti

Chemical and Biochemical Engineering Faculty Research & Creative Works

Regional delivery of chimeric antigen receptor (CAR) T cells in glioblastoma represents a rational therapeutic approach as an alternative to intravenous administration to avoid the blood-brain barrier impediment. Here, we developed a fibrin gel that accommodates CAR-T cell loading and promotes their gradual release. Using a model of subtotal glioblastoma resection, we demonstrated that the fibrin-based gel delivery of CAR-T cells within the surgical cavity enables superior antitumor activity compared to CAR-T cells directly inoculated into the tumor resection cavity.

Experimental Data On Water Soluble Polymers Thermal And Hydrolytic Stability, Reactivity Ratios Of Monomers And Frr Calculation For Thermally Stable Preformed Particle Gels Therefrom, Buddhabhushan Salunkhe, Thomas P. Schuman, Ali Al Brahim, Baojun Bai

Chemistry Faculty Research & Creative Works

Experimental data on water soluble polymer thermal and hydrolytic stability in acidic, neutral and basic pH conditions in aqueous solution is presented. Thermal and hydrolytic stability of polymer aqueous solutions were monitored in variable pH medium by aging at 130 °C temperature for different aging time. Polymer viscosity measurements were performed periodically for 3 months. Furthermore, this data can serve as a basis of monomer selection for thermally stable hydrogels for applications like oil recovery, hydrogel coatings for steam sterilized medical devices and other applications. Reactivity ratios were determined for monomers associated to the most stable polymers using ¹H …

Semi-Annual Progress Report #9, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Three-Dimensional Printing Of Reinforced Concrete And Nozzle Therefor, Chenglin Wu, Genda Chen, Dimitri Feys, Guirong Grace Yan, Bryce Tyler Tafolla

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A three-dimensional printing system for reinforced concrete and a nozzle therefor. The system employs an extruder for extruding unreinforced concrete and a concrete reinforcement feeder is for feeding one or more elongate reinforcement members. The nozzle has an outlet and is operatively connected to the extruder and the concrete reinforcement feeder to receive the unreinforced concrete from the extruder and to receive the one or more elongate reinforcement members from the concrete reinforcement feeder. The nozzle combines the unreinforced concrete from the extruder and the one or more elongate reinforcement members from the concrete reinforcement feeder into a reinforced concrete …

A Comprehensive Review Of In-Situ Polymer Gel Simulation For Conformance Control, Baojun Bai, Jianqiao Leng, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been widely applied in mature oilfields to improve sweep efficiency and control water production. Correct numerical simulation is of major importance to the optimization design and prediction of a successful gel treatment. However, there exist many problems in current simulation studies in published literature. This paper first presents a comprehensive review on the major factors that have been considered at different gelation stages during gel treatment, the models used in the commercial/in-house simulators, and current numerical simulation studies on both laboratory and field scales. Then we classify the current in-situ gel numerical simulation problems as 1, deficient …

Vacancy-Induced Enhancement Of Electron-Phonon Coupling In Cubic Silicon Carbide And Its Relationship To The Two-Temperature Model, Salah Al Smairat, Joseph T. Graham

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

The electron-phonon coupling factor was calculated for both pristine and vacancy-rich 3C-SiC. Ab initio calculations were performed within the framework of the density functional perturbation theory. Wannier functions were used to interpolate eigenvalues into denser grids through the electron-phonon using Wannier code. The coupling factor was determined through calculations of the electron self-energy, electron-phonon relaxation time, and electronic specific heat. These parameters were extrapolated to high temperatures using a hybrid model which mixes band calculations for electrons below an energy cutoff with the free electron gas model for electrons above the energy cutoff. The electron relaxation times, specific heats, electron …

Microscopic Diffusion Characteristics Of Linear Alkylbenzene Sulfonates On The Surface Of Anthracite: The Influence Of Different Attachment Sites Of Benzene Ring In The Backbone, Xuanlai Chen, Guochao Yan, Xianglin Yang, Guang Xu, Shuai Wei

Mining Engineering Faculty Research & Creative Works

In order to explore the effect of the attachment site of the benzene ring in the backbone of the surfactant on its diffusion characteristics on the surface of anthracite, the molecular dynamics simulation method was used, and the four isomers (m-C16, m = 2,4,6,8; m represents the attachment site of the benzene ring in the backbone) of sodium hexadecyl benzene sulfonate (SHS) were selected. Binary models of surfactant/anthracite, surfactant/graphene modified by oxygen-containing functional groups, and a ternary model of water/surfactant/anthracite were constructed. By analyzing a series of properties such as interaction energy, contact surface area, relative concentration distribution, radial distribution …

Effects Of Fiber Clustering On Fatigue Behavior Of Steel Fiber Reinforced Concrete Beams, Danying Gao, Zhiqiang Gu, Congjie Wei, Chenglin Wu, Yuyang Pang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper investigated the effects of fiber clustering on fatigue behavior of steel-fiber-reinforced concrete (SFRC) beams with reinforcements by experimental and numerical analysis. The steel fiber volume fractions of beams were 0 vol%, 0.5 vol%, 1.0 vol%, and 1.5 vol%. One beam was tested under static loading, and eight beams under fatigue loading with different stress levels. Moreover, the fiber distribution in the cross section of concrete was experimentally characterized to understand the underlying mechanism. The results indicated that the fatigue life of beam increased with increasing fiber volume fraction from 0 to 1.0 vol% and decreased from 1.0 vol% …

Energy Dissipation Using Negative Stiffness Shells, Mohamed Elgawady, Yasser Darwish

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A negative stiffness shell has a convex first position, but can transition or snap to a concave second position under a force applied to the exterior surface of the shell in the convex first position. During the transition, the shell exhibits negative stiffness that permits a large amount of energy to be absorbed. The negative stiffness shell can withstand a high initial force threshold prior to transitioning. In the second, concave position the shell can still resist force. Moreover, it is possible for the shell to revert back to the first, convex position with minimal plastic deformation for subsequent use. …

Impact Of Clay Stabilizer On The Methane Desorption Kinetics And Isotherms Of Longmaxi Shale, China, Zhong Hua Liu, Jia Chun Wang, Baojun Bai, Yan Ling Wang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Knowing methane desorption characteristics is essential to define the contribution of adsorbed gas to gas well production. To evaluate the synthetic effect of a clay stabilizer solution on methane desorption kinetics and isotherms pertaining to Longmaxi shale, an experimental setup was designed based on the volumetric method. The objective was to conduct experiments on methane adsorption and desorption kinetics and isotherms before and after clay stabilizer treatments. The experimental data were a good fit for both the intraparticle diffusion model and the Freundlich isotherm model. We analyzed the effect of the clay stabilizer on desorption kinetics and isotherms. Results show …

Blood Biomarkers For Mild Traumatic Brain Injury: A Selective Review Of Unresolved Issues, Daniel B. Hier, Tayo Obafemi-Ajayi, Matthew S. Thimgan, Gayla R. Olbricht, Sima Azizi, Blaine Allen, Bassam A. Hadi, Donald C. Wunsch

Biological Sciences Faculty Research & Creative Works

Background: The use of blood biomarkers after mild traumatic brain injury (mTBI) has been widely studied. We have identified eight unresolved issues related to the use of five commonly investigated blood biomarkers: neurofilament light chain, ubiquitin carboxy-terminal hydrolase-L1, tau, S100B, and glial acidic fibrillary protein. We conducted a focused literature review of unresolved issues in three areas: mode of entry into and exit from the blood, kinetics of blood biomarkers in the blood, and predictive capacity of the blood biomarkers after mTBI.

Findings: Although a disruption of the blood brain barrier has been demonstrated in mild and severe traumatic brain …

Image-Based Bridge Defect Detection And Monitoring Technologies, Jian Zhang

INSPIRE Archived Webinars

Computer-vision is an emerging technology which has been widely used in the field of structural health monitoring. This seminar will cover the latest achievements of our research group in defect detection, health monitoring, and construction control using image-based technologies. For defect detection, advanced unmanned aerial vehicles (UAVs) have been developed to automatically detect surface cracks and other types of structural damages based on digital image processing techniques. An integrated navigation system combining binocular camera and inertial sensor enables automated route planning for the developed UAVs in case of GPS failure. Specifically, a wall-climbing UAV is designed to acquire detailed surface …

Evolutionary Algorithm-Based Adaptive Robust Optimization For Ac Security Constrained Unit Commitment Considering Renewable Energy Sources And Shunt Facts Devices, Aliasghar Baziar, Rui Bo, Misagh Dehghani Ghotbabadi, Mehdi Veisi, Waqas Ur Rehman

Electrical and Computer Engineering Faculty Research & Creative Works

An AC security constrained unit commitment (AC-SCUC) in the presence of the renewable energy sources (RESs) and shunt flexible AC transmission system (FACTS) devices is conventionally modeled as a deterministic optimization problem to minimize the operation cost of conventional generation units (CGUs) subject to AC optimal power flow (AC-OPF) equations, operation constraints of RESs, shunt FACTS devices, and CGUs. To cope with the uncertainties of load and RES generation, robust and stochastic optimization and linearized formulation have been used to achieve a sub-optimal solution. To arrive at a more optimal solution, an evolutionary algorithm-based adaptive robust optimization (EA-ARO) approach to …

Quantifying Time-Frequency Co-Movement Impact Of Covid-19 On U.S. And China Stock Market Toward Investor Sentiment Index, Rui Nian, Yijin Xu, Qiang Yuan, Chen Feng, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Worldwide Spread of Covid-19 Dramatically Influences the World Economic Landscape. in This Paper, We Have Quantitatively Investigated the Time-Frequency Co-Movement Impact of Covid-19 on U.S. and China Stock Market Since Early 2020 in Terms of Daily Observation from National Association of Securities Dealers Automated Quotations Index (Ndx), Dow Jones Industrial Average (Djia), Standard & Poor's 500 Index (Spx), Shanghai Securities Composite Index (Ssec), Shenzhen Securities Component Index (Szi), in Favor of Spatiotemporal Interactions over Investor Sentiment Index, and Propose to Explore the Divisibility and the Predictability to the Volatility of Stock Market during the Development of Covid-19. We Integrate …

Developing Robust Bidding Strategy For Virtual Bidders In Day-Ahead Electricity Markets, Hossein Mehdipourpicha, Siyuan Wang, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Purely financial players without any physical assets can participate in day-Ahead electricity markets as virtual bidders. They can arbitrage the price difference between day-Ahead (DA) and real-Time (RT) markets to maximize profits. Virtual bidders encounter various monetary risks and uncertainties in their decision-making due to the high volatility of the price difference. Therefore, this paper proposes a max-min two-level optimization model to derive the optimal bidding strategy of virtual bidders. In this model, the risks of uncertainties associated with the rivals' strategies and RT market prices are managed by robust optimization. The proposed max-min two-level model is turned into a …

Common Ground Newsletter Fall 2021, Missouri University Of Science And Technology

Common Ground

-Lighting the way with solar panel inspections
-CArEE Miner athletes score recognition
-Celebrating 150 years of civil engineering at S&T

Submicron Metal 3d Printing By Ultrafast Laser Heating And Induced Ligand Transformation Of Nanocrystals, Chinmoy Podder, Xiangtao Gong, Xiaowei Yu, Wan Shou, Heng Pan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Currently, light-based three-dimensional (3D) printing with submicron features is mainly developed based on photosensitive polymers or inorganic-polymer composite materials. To eliminate polymer/organic additives, a strategy for direct 3D assembly and printing of metallic nanocrystals without additives is presented. Ultrafast laser with intensity in the range of 1 x 1010 to 1 x 1012 W/cm2 is used to nonequilibrium heat nanocrystals and induce ligand transformation, which triggers the spontaneous fusion and localized assembly of nanocrystals. The process is due to the operation of hot electrons as confirmed by a strong dependence of the printing rate on laser pulse duration varied in …

Secure Communication In A Multi-Antenna Wiretap Channel With A Reconfigurable Intelligent Surface, Mohamed Nafea, Aylin Yener

Electrical and Computer Engineering Faculty Research & Creative Works

Reconfigurable Intelligent Surfaces (RIS) are being considered as a candidate technology for next generation of wireless systems (6G), for improving reliability and range extension owing to their low cost and complexity, and suitability for high-frequency schemes. RIS terminals can effectively operate as relaying nodes for transmitted signals, while saving the energy needed for Radio Frequency (RF) transmission. This is implemented by deploying controllable reflecting arrays of meta-surface elements, whose phase can be adjusted by applying fast switching voltage. RIS thus creates a valuable resource in wireless communication: the control over the channel realizations from the RIS relays to the receiver. …

Optoacoustically Induced Auditory Brainstem Responses In The Mouse Model Enhanced Through An Absorbing Film, Gabriela Lana

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

Fluid-Cooled Compact X-Ray Tube And System Including The Same, Hyoung-Koo Lee, V Ashish Avachat, Wesley William Tucker

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

A fluid-cooled compact x-ray system includes a compact x-ray tube and a coolant channel coupled thereto. The compact x-ray tube includes a tube housing defining a longitudinal axis, and an electron source in the tube housing and coaxial with the tube housing. The electron source is configured to generate an electron beam. The compact x-ray tube also includes an anode coaxial with the tube housing, the anode defining a plane perpendicular to the longitudinal axis and including a target material, and an electron focusing mechanism in the tube housing and configured to focus and accelerate the electron beam to the …

Assessment Of Streamflow Predictions Generated Using Multimodel And Multiprecipitation Product Forcing, Bong Chul Seo, Witold F. Krajewski, Felipe Quintero, Steve Buan, Brian Connelly

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study assesses streamflow predictions generated by two distributed hydrologic models, the Hillslope Link Model (HLM) and the National Water Model (NWM), driven by three radar-based precipitation forcing datasets. These forcing data include the Multi-Radar Multi-Sensor (MRMS), and the Iowa Flood Center's single-polarization-based (IFC-SP) and dual-polarization-based (IFC-DP) products. To examine forcing-and model-dependent aspects of the representation of hydrologic processes, we mixed and matched all forcing data and models, and simulated streamflow for 2016–18 based on six forcing–model combinations. The forcing product evaluation using independent ground reference data showed that the IFC-DP radar-only product's accuracy is comparable to MRMS, which is …

Fiber Optic-Based Thermal Integrity Profiling Of Drilled Shaft: Inverse Modeling For Spiral Fiber Deployment Strategy, Wen Deng, Ruoyu Zhong, Haiying Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The current state of practice to interpret the thermal integrity profiling (TIP) data of drilled shaft is the so-called effective radius method. It uses the concrete pouring log and average temperature to construct a relationship between temperature distribution and effective radius that can be used to reconstruct a drilled shaft model. While this effective radius method is computationally inexpensive and has good operationality, it is not good at predicting the dimensions and shape of shaft defects. Upgrading the sensor used in conventional TIP from thermocouples/thermal wires to fiber optic sensors, the spatial resolution of the measured temperature will be enhanced. …

The Behaviour Of Rare Earth Elements From South African Coal Fly Ash During Enrichment Processes: Wet, Magnetic Separation And Zeolitisation, Mero Lee Ursula Cornelius, Alechine Emmanuel Ameh, Chuks Paul Eze, Olanrewaju Fatoba, Asel Sartbaeva, Leslie Felicia Petrik

Mining Engineering Faculty Research & Creative Works

Rare earth elements (REEs) are essential raw materials in a variety of industries including clean energy technologies such as electric vehicles and wind turbines. This places an ever-increasing demand on global rare earth element production. Coal fly ash (CFA) possesses appreciable levels of REEs. CFA, a waste by-product of coal combustion, is therefore a readily available source of REEs that does not require mining. CFA valorization to zeolites has been achieved via various synthesis pathways. This study aimed to evaluate one such pathway by monitoring how REEs partition during CFA processing by the wet, magnetic separation process and zeolitisation. South …