Engineering Commons^™

Nanobubble Capillary Force Between Parallel Plates, Eric Bird, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Aggregation of Fine or Ultrafine Particles in Liquid Due to the Nanobubble (NB) Bridging Capillary Force is a Key Process for Many Industrial Applications. the Magnitude and Direction of the NB Capillary Force (NBCF) Are Directly Affected by the Geometry of the NB Gas Bridge between Two Adjoining Particles. Although the NBCF Can Be Accurately Measured using Experimental Techniques, It is Very Challenging to Monitor the Images of a NB Capillary Bridge in Nanoscale Spatial Resolution in NBCF Measuring Experiments. as a Result, the Capillary Force Model that Predicts the Dependence of the NBCF on the Geometry of the …

Ecological Restoration Of Lead/Zinc/Copper Mine Tailings: Phytomanagement And Amendment Strategies To Enhance Substrate Functionality And Biomass Production, Mariam K. Al-Lami

Doctoral Dissertations

“The extreme physiochemical characteristics of mine tailings inhibit microbial processes and natural plant growth. Consequently, vast and numerous tailings sites remain barren for decades and highly susceptible to wind and water erosion. Phytostabilization is a cost-effective and ecologically productive remediation approach; however, tailings revegetation is generally challenging and must often be assisted with appropriate soil amendments. Amendments applied individually in greenhouse studies discussed herein revealed notable improvement in bioenergy crops growth only with biosolids treatments. Recalcitrant carbon amendments (biochar and humus) showed notable impact only on tailings physichochemical and hydraulic properties. Nevertheless, biosolids may not support sustained vegetation due to …

The Utilization And Loss Of Available Energy In Aerospace Systems, Mohammad Abbas

Doctoral Dissertations

“Theoretical principles and analytical methodology for the control volume-based energy availability methodology for aerospace vehicles are developed; applications are made to jet-propelled and rocket-propelled vehicles as well as to stand-alone engine systems. Energy availability utilization characteristics of a modeled turbojet engine are studied across a wide range of operating conditions of throttle setting, flight altitude, and flight Mach number. The method is also extended to consider jet-powered vehicles. Fundamental principles regarding entropy generation and energy availability are developed, including directly linking entropy generation and maximum range and endurance of a powered aircraft. Theory and application of the energy utilization methodology …

Effects Of Vacancies And Electron Temperature On The Electron Phonon Coupling In Cubic Silicon Carbide And Their Connection To The Inelastic Thermal Spike, Salah Al-Smairat

Doctoral Dissertations

“The electron-phonon interaction is an important interaction in many solids as it influences transport phenomena and related quantities such as the electrical and thermal conductivities, especially in nuclear and space applications. The importance of the electron-phonon interaction in primary damage production in 3C-SiC is the subject of this research.

The electron-phonon coupling factor was calculated using a hybrid Density Functional Perturbation Theory - Classical Electron Gas model. The coupling factor was calculated as a function of electron temperature in pristine and defective 3C-SiC, and relaxed defective cells. The electron-phonon coupling is found to depend strongly on the electronic temperature and …

Corrosion Protection Mechanisms Of Trivalent Chromium Based Passivations On Γ-Znni Coated Al6061-T6 Alloy, Kevin Foster

Doctoral Dissertations

“The role of cobalt in trivalent chromium passivations (TCPs) to improve corrosion resistance of γ-ZnNi coated steel and aluminum is based on its effect on hexavalent chromium content in the passive layer. Investigations of both a cobalt-containing and cobalt-free TCP on SAE 1008 steel indicated that both passivations protect well for up to 1000 hours in neutral salt spray exposure (SSE). A repetition on Al 6061-T6 alloy indicated that TCP performed much better than cobalt-free TCP implicating the underlying substrate. Optical and electron micrographs indicated physical changes such as crack thickness, crack density, passivation porosity, and passivation thickness existed between …

Characterization And Utilization Of Alkali-Activated Concrete For Sustainable Infrastructures, Eslam Gomaa

Doctoral Dissertations

“This study has investigated the feasibility of using locally available fly ashes (FAs) to synthesize alkali-activated concrete (AAC) for different structural and repair applications. Using AAC made of 100% FA reduces global CO2 emissions, saves energy, and decreases raw material consumption during the production process of ordinary Portland cement. Class C FAs, sourced from Labadie, Jeffery City, Kansas City, Thomas Hill, and Sikeston power plants in the state of Missouri, were used to synthesize the AAC. Sodium silicate (SS), Na2SiO3, and sodium hydroxide (SH), NaOH were used as the alkali activators. Slag, crumb rubber, and air-entraining admixture were used as …

Modeling Strategy For Emi Filter And Flyback Transformer, Ruijie He

Doctoral Dissertations

“The switch-mode power supply is key to miniaturizing power adapters. However, the switching nature of the circuit introduces issues in conducted emissions. In a flyback converter, the transformer serves as the path for common mode current flowing from the primary side to the secondary side. Different winding technologies have been invented and implemented to reduce the capacitance between the primary side and the secondary side. But the repeatability of the winding is still poor due to the fluctuations of the winding machine. Thus, the resulting conducted emission has a fluctuation that can lead to failure in the compliance tests. EMI …

Innovative Approach To Use Guayule Resin As A Bio-Based Asphalt Alternative, Ahmed Hemida

Doctoral Dissertations

"Asphalt cement will not last long as the world encounters a diminishment in crude oil. Novel resources can contribute to replacing asphalt with the sustainable, flexible pavement. This study presented guayule resin (guayule) as an innovative bio-based asphalt alternative. Ground tire rubber was used as an asphalt enhancer. To judge the guayule's contribution, guayule-based binders were investigated and compared to control asphalt and asphalt-rubber binders. Binders were assessed according to comprehensive Superpave criteria and advanced rheological tests. Component analysis was performed to link the microscale level with the macroscale level. To validate the novel binder, satisfying mix performance tests were …

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …

Characterizing And Modeling Methods For Power Converters, Anfeng Huang

Doctoral Dissertations

“Stable power delivery is becoming increasingly important in modern electronic devices, especially in applications with stringent requirements of its form factor. With the evolution of technology, the switching frequency in a power converter is pushed to a higher frequency range, e.g., several MHz or even higher, to decrease its size. However, the loss generated in the converter increases drastically due to the high switching frequency. In addition, a wide-band feedback controller is required to accommodate the high switching frequency in the converter. We focus on the characterization or modeling of the feedback control circuits and critical components in a switching …

Numerical Simulation Study Of Gel Treatment For Conformance Control From Lab To Field, Jianqiao Leng

Doctoral Dissertations

“Gel treatment has been widely applied to control reservoir conformance and thus improve the sweep efficiency of injection fluids. Quite a few numerical simulations have been conducted to investigate the factors impacting gel treatment and assist to optimize treatment design and predict the performance. However, there exists significant barrier between the simulation approaches and lab experiments. In this study, two comprehensive reviews have been conducted to identify the gaps between lab and current simulations for in-situ polymer treatment and preformed particle gel treatment, separately.

Based on the identified gaps, the effect of a few major factors which are very important …

Depression Of Pyrite In Polymetallic Sulfide Flotation Using Chitosan-Grafted-Polyacrylamide Polymers, Keitumetse Cathrine Monyake

Doctoral Dissertations

“In this work, Chitosan-grafted-Polyacrylamides (Chi-g-PAMs) were studied, for the first time, as selective depressants of pyrite in the flotation of base metal sulfides. Fundamental studies of the adsorption behavior of Chi-g-PAM on model sulfide minerals indicated that Chi-g-PAM was more selective to pyrite’s surfaces as compared to base metal sulfides. Results suggested that the adsorption of Chi-g-PAM at pyrite-water interface was a chemisorption in nature which involved the amine, amide, and hydroxyl groups of Chi-g-PAM. Batch flotation studies of complex sulfide ore of Mississippi Valley Type (MVT) showed that Chi-g-PAM outperformed other pyrite’s depressants at producing less pyrite-diluted concentrates. Statistical …

Mechanical Properties Of Boride Based Ceramics, Alec Murchie

Doctoral Dissertations

“This research focuses on the elevated mechanical properties of diboride based materials at room and elevated temperatures. These materials include a ZrB₂ ceramic, a ZrB₂-WC-SiC ceramic, and a (Hf,Mo,Nb,Ta,W,Zr)B₂ high entropy boride (HEB). The room temperature flexural strength for the ZrB₂ ceramic was 447 MPa and the fracture toughness was 2.3 MPa·m^1/2. The strength decreased to 196 MPa at 1800°C, and then increased to 360 MPa at 2300°C. The fracture toughness increased to 3.1 MPa·m^1/2 at 2200°C. The strength up to 1800°C was likely controlled by a combination of effects: surface damage …

Scale Formation, Properties And De-Scaling In Steelmaking, Richard Osei

Doctoral Dissertations

During continuous castings, reheating, and hot rolling, slab surfaces are exposed to atmospheres containing oxidizing gases which results in scale formation. Inefficient removal of the formed scale during reheating affects product surface quality. The effect of steel composition and operating parameters on scale formation and scale removal efficiencies were investigated. Experimental investigations were carried out using a thermogravimetric (TGA) apparatus designed to replicate the combustion gas atmosphere and temperature in actual industrial slab reheat furnaces. Report on oxidation kinetics, scale structure and properties, and descaling were conducted on laboratory cast and industrial samples. Different characterization techniques were used to analyze …

Characterization Of High Cycle Fatigue And Laser-Aided Machining And Polishing Of Additively Manufactured Materials, Mohammad Masud Parvez

Doctoral Dissertations

“Additive manufacturing (AM) and laser-aided machining and polishing (LAMP) of materials are emerging manufacturing processes both for research and industrial sectors. The AM process can manufacture near-net-shape parts with complex geometries. Meanwhile, the LAMP process integrated with an AM system offers a high processing rate, minimum heat-affected zone, and easily adjustable process parameters during machining and polishing. In mechanical properties characterization of AM metals and alloys, fatigue is a vitally important test method to understand the behavior of materials in cycling loading and unloading circumstances since most mechanical failures of structures are due to fatigue. To characterize AM metal fatigue …

Investigation Of The Thermodynamics Of Iron Phosphate Melts And Stability Of Iron Phosphate Glasses: Effects Of Composition And Iron Redox Ratio, Melodie Linda Schmitt

Doctoral Dissertations

“Iron phosphate glasses with Fe/P = 0.33 - 0.67, O/P = 3.0 - 3.5 and Fe²⁺/ΣFe = 0.16- 0.52 were prepared by altering batch compositions and melt conditions. Thermal analyses indicate polyphosphate glasses with intermediate chain lengths are most stable against devitrification. Heterogeneous crystallization occurs on the glass surface and is dependent on iron valence state, particle size, heating rate, temperature and oxygen availability in the atmosphere. Oxidation of ferrous iron on the glass surface occurs at temperatures as low as Tg, and thus crystallization behavior and stability can be altered via post-melt heat treatments. A novel preparation …

Advances And Applications In High-Dimensional Heuristic Optimization, Samuel Alexander Vanfossan

Doctoral Dissertations

“Applicable to most real-world decision scenarios, multiobjective optimization is an area of multicriteria decision-making that seeks to simultaneously optimize two or more conflicting objectives. In contrast to single-objective scenarios, nontrivial multiobjective optimization problems are characterized by a set of Pareto optimal solutions wherein no solution unanimously optimizes all objectives. Evolutionary algorithms have emerged as a standard approach to determine a set of these Pareto optimal solutions, from which a decision-maker can select a vetted alternative. While easy to implement and having demonstrated great efficacy, these evolutionary approaches have been criticized for their runtime complexity when dealing with many alternatives or …

Characterization And Modeling Of Esd Events, Risk And Protection, Jianchi Zhou

Doctoral Dissertations

“The ESD (Electrostatic discharge) failures have been raising critical reliability problems in electronic devices design. However, not all the ESD scenarios have been specified by the IEC standard and the characterizations of the ESD risk for different scenarios are essential to evaluate the ESD robustness of the devices in the real word.

The insulation of plastic enclosures provides protection against ESD to the electronic system inside. However, seams between plastic parts are often unavoidable. Different plastic arrangements are constructed to investigate the spark length and current derivatives and to understand the ESD spark behavior for geometries having spark lengths longer …

Evaluation Of Recrosslinkable Preformed Particle Gel (Rppg) As A Fluid Loss Control Material During Drilling Operations, Mohamed Saad M. Ahdaya

Doctoral Dissertations

"One of the most intense, expensive, and time-consuming problems during drilling operations is the loss of circulation, which could result in several consequences, including wellbore collapse, fluid inflow, formation damage, environmental issues, and nonproductive time. This research aims to evaluate novel materials that can mitigate lost circulation and overcome the limitation of other materials. In this research, a comprehensive evaluation of a re-crosslinkable preformed particle gel (RPPG) has been conducted to determine the extent to which it can be used to control drilling fluid losses during drilling operations. The RPPG consists of swellable gel particles that can self-crosslink to form …

Novel Sensor Platforms Based On Fabry-Perot Resonators For Applications In Environmental Geophysics, Jing Guo

Doctoral Dissertations

"Fabry-Perot resonator sensors have been widely used for various physical and chemical measurements owing to their unique advantages over traditional sensors such as high measurement resolution, mechanically robust, and distributed sensing capabilities. This dissertation focuses on the development of robust fiber optic microwave sensors based on Fabry-Perot resonator mechanism for real-time applications in environmental geophysics.

Firstly, a novel Extrinsic Fabry-Perot Interferometer (EFPI)-based fiber-optic sensor for force measurement using a pre-buckled beam was demonstrated. The axial displacement is transferred and amplified to a horizontal deflection at the middle of the buckled beam, leading to a relatively significant change in the Fabry-Perot …

Determining Thermal Properties Via Parameter Estimation Of A One-Dimensional, Analytical Model, Lauren B. Tomanek

Doctoral Dissertations

“In thermal applications, thermal conductivity is used to predict how well a material conducts heat. The accuracy of the magnitude of the thermal conductivity becomes increasingly essential to optimize part geometry. Thermal conductivity can vary significantly from the nominal value due to post-processing. The ASTM standards available to measure thermal conductivity are challenging to reproduce because of the insulated and prescribed temperature boundary conditions that are needed. The research introduces two new methods for estimating thermal conductivity that deliver the same accuracy as the existing ASTM standards and are easier to implement. The methods account for losses in the heating …

Advances In Control Of Uncertain Dynamical Systems With Optimal And Adaptive Approaches, Meryem Deniz

Doctoral Dissertations

"This research starts with designing optimal control for uncertain systems, adding the adaptive control input to suppress the uncertainty. It then follows with designing the optimal control for state constraint, designing the optimal nonlinear reference model, designing adaptive control to handle state constraint and uncertainty. Finally, it designs the finite-time controller for uncertain multiagent systems.

It is well known that the design of the control algorithm for an uncertain dynamical system is not trivial. Motivated by this standpoint, this study focuses on optimal and adaptive control approaches with stability and performance guarantees for uncertain sole and multiagent dynamical systems. From …

Distributed Fiber-Optic Temperature Sensors For Applications In The Steel Industry, Muhammad Roman

Doctoral Dissertations

"Steelmaking facilities require continuous temperature measurements throughout the manufacturing process to ensure consistent product quality and high productivity. Motivated by the limitations of conventional temperature sensors, distributed fiber-optic sensors (DFOS) were developed and deployed for various applications in the steel industry. Fiber-optic sensors offer various advantages over conventional sensors, such as the miniaturized size of the optical fiber, immunity to electromagnetic interferences, capability for multiplexing and distributed sensing, and the ability to withstand harsh environments.

Firstly, high-resolution Rayleigh backscattering based DFOS were demonstrated as potential solutions for temperature measurements in steelmaking processes by performing experimental simulations. Additionally, aluminum casting experiments …

Production Of Non-Oriented Electrical Steel Thin Strip Simulating Conditions Of The Direct Twin-Roll Casting Process, Yizhou Du

Doctoral Dissertations

"In this study, a method to cast non-oriented (NGO) electrical steel with conditions of an industrial twin roll thin strip casting (TRSC) process was investigated. A novel vacuum assisted fast cooling (VA) sampling method was developed to produce 2 mm thick strip simulating conditions of an industrial TRSC process. The effects of solidification cooling rate, hot rolling deformation, and annealing time on inclusion distribution, magnetic properties, grain growth, and texture evolution of 3.4 wt.% Si NGO electrical steel with different carbon and sulfur (C&S) levels were analyzed. Samples were thermo-mechanically treated which simulated an industrial TRSC process. After a long …

Joining Of Ultra-High Temperature Ceramics To The Same And Refractory Metals Via Fusion Welding, Jecee Jarman

Doctoral Dissertations

"This research focuses on the joining of ultra-high temperature ceramics to either themselves or refractory metals/alloys via fusion welding and the mechanical strength of produced joints. The ceramics studied consisted of compositions within a diboride-carbide-carbide ternary system while metals studied consisted of molybdenum and a molybdenum alloy. SiC-ZrB2-ZrC ceramics on a binary join between pure SiC and the ternary eutectic composition were found to be weldable when SiC content was below ~57.5 vol%. Compositions above 57.5 vol% SiC were unweldable based on pitting and off-gassing behavior. Welded strength of ceramics was ~180-300 MPa in the SiC-ZrB2-ZrC ternary eutectic composition, ~180-220 …

Development Of An Interactive Robot For Overground Physical Human-Robot Interaction, Sambad Regmi

Doctoral Dissertations

"The overground interactive robots are potentially beneficial for humans in various areas, such as overground rehabilitation therapies and robotic interactive assistance. However, it is unclear what the expectations and challenges are for a robot to be physically interactive with a human during overground tasks, such as a robot helping an older adult walk. To develop such a robot, one must first build a clear understanding of how the human motor intent is communicated when interacting with another agent. Specifically, how do humans understand the leader’s intention when being led?

Based on previous works, we hypothesized that humans modulate their arm …

Peritectic Behavior Detection And Prediction In Fe-C-Si-Mn-Al System, Damilola Balogun

Doctoral Dissertations

"The non-uniformity of shell growth in the continuous casting of peritectic steels constitutes a major barrier to the commercial production of many steel grades such as Advanced high strength steels (AHSS), transformation induced plasticity (TRIP) steels, abrasion-resistant steels, advanced armor plate steels, and many newly proposed steel grades that contain high levels of silicon, manganese, and aluminum.

The shell growth non-uniformity experienced in the continuous casting of peritectic steels results in the formation of defects in the as-cast slab and therefore increases the operating risk from cast aborts and breakouts. The ability to predict and avoid peritectic behavior at the …

Strategies To Improve Shrinkage Resistance Of Cement-Based Materials For Extrusion-Based 3d Printing, Kavya Vallurupalli

Doctoral Dissertations

"The main objective of this study is to develop new generation of shrinkage-resistant 3D printable mortar mixtures. To this end, the research work was carried out to: i) identify key material and processing parameters that affect printability; ii) investigate the influence of water-to-cement ratio, superplasticizer dosage, and welan gum content on mortar printability; iii) propose a “printability window” where rheological properties and desorptivity can secure successful printing; iv) investigate effect of shrinkage mitigation materials (expansive agent (EA), pre-saturated lightweight sand (LWS), superabsorbent polymers (SAP), and shrinkage reducing admixture) on printability and shrinkage performance of mortar; and v) evaluate the effect …

Sustainable Face Milling Of Inconel 718 Using Mql And Nanofluids Mql With Vegetable Oil As Base Fluid, Theodore Obumselu Nwoguh

Doctoral Dissertations

"Extreme heat and friction are generated in machining difficult-to-cut metals used in aerospace and nuclear industries leading to poor machinability (high cutting forces, rapid tool wear, shorter tool life, and poor surface integrity). Conventional flood coolant (CEC) used in industry is environmentally unfriendly, hazardous to operators, and unsustainable. These problems motivated this research, which can be mitigated with the use of effective biodegradable cutting fluids, appropriate cutting conditions, and lubrication/cooling strategies. This research provides a sustainable and environmentally friendly replacement to CEC. Firstly, the research characterized three vegetable oils (High Oleic Soybean Oil (HOSO), Low Oleic Soybean Oil (LOSO), and …

Design And Performance Of Self-Consolidating And Thixotropic Ultra-High-Performance Concrete For Infrastructure Construction And Rehabilitation, Le Teng

Doctoral Dissertations

"The objective of this research is to develop two classes of ultra-high-performance concrete (UHPC), one with self-consolidating consistency and the other with improved thixotropy. Tailoring the rheological properties of low yield stress UHPC can improve dispersion and orientation of steel fibers used in the design of UHPC, hence enhancing the tensile and flexural properties. Similarly, improving the thixotropy of UHPC can enable unique performance for the design of thin bonded bridge deck overlay. The research investigated various thixotropy enhancing admixtures to enhance the structural build-up at rest of UHPC. A total of 16 bonded overlay slab specimens were used to …