Engineering Commons^™

Design Of High Tension Outdoor Substation, Joseph Worley

Bachelors Theses

"The present day tendency appears to be toward the more frequent use of outdoor substations, where not only the section disconnecting switches, but also transformers, lightning arresters, and indeed all high tension equipment, are exposed to the weather. The control of local feeder circuits at the lower pressures would be by means of switch-panels in cheaply constructed houses erected near the transformers"--Introduction, page 3.

On The Breakage Of Rock Drill Steel, Muir Luken Frey

Masters Theses

"Prior to 1920 there was little attention paid to the general problem of breakage of rock drill steel. Each locality had its problem and the matter was treated as a purely local one, independent upon conditions in that particular section. But in the above-mentioned year, there arose an interest of wider scope, from what causes it is impossible to determine accurately, and the matter is now the subject of a broad investigation in which the users of rock drill steel, the United States Bureau of Mines, and the United States Bureau of Standards are cooperating...There is, to date, no satisfactory …

Effect Of Time And Temperature On Distillation Of Zinc-Lead-Silver Complex Sulphide Concentrates, Ernest Sterling Wheeler

Masters Theses

"Accurate information is lacking as to the effect of temperature and time of distillation on the relative proportions of zinc, lead and silver volatilized from complex ores, and while it is evident that the possibility of the commercial treatment of these complex ores has engaged the attention of metallurgists for years, it is one that will still bear investigation even on a small scale"--Statement of Problem, page 5.

Report On The Metates Mining Company, Harvey Louis Tedrow

Professional Degree Theses

"This report is to describe the property and operations of the Metates Mining Company and to propose plans for further development"--Object, page 1.

Missouri School Of Mines, Civil Engineering Department Survey Data. Including The Adjustment Of The Triangulation Net On The M.S.M. Campus, Joe Beaty Butler, Roy Oscar Erickson, Wayne Shannon Frame

Professional Degree Theses

"In taking up the adjustment of survey data on the M.S.M. Campus the first thing to determine [is] the use for said data. The data is used by the Department to determine whether or not the student in his Field Work has pursued correct methods. No attempt is made to require great precision as the student is just learning to use the instruments and time is not allowed in the courses for him to learn other than the rudiments of Surveying"--Part 2, Adjustment Data, Narration of Adjustment Methods, page 24.

Oil Possibilities In Western Kansas And North Central Wyoming, Joseph Stewart Irwin

Professional Degree Theses

"The reported discover of oil in the McNab well in the northwest corner of Trego County, Kansas, has attracted attention to that region as possible oil producing territory. The offer of certain blocks of leases on several so-called "oil structures" occasioned the reconnaissance made by the writer. The prospects were examined during the period, September 28 to October 14, 1921"--page 1.

Applications Of Method Of Least Squares To The Adjustment Of Level Circuits: Adjustment Of Elevations In Dawson And St. James Townships, Phelps County, Missouri, Clarence Edward Bardsley

Professional Degree Theses

"An introduction to a thesis on least squares could be drawn out to considerable length in explanation: as the purpose of this thesis has been an investigation in applications of the method of least squares to the adjustment of level circuits, it will be found in the body of the report considerable space has been devoted to the explanation of the different applications of the method, with a view that these investigations may be of use to engineers in the profession; so the introductory remarks will be brief ... The method of least squares takes first rank as an arithmetical …

Method Of Sampling Diamond-Drill Core, William Henry Mccartney

Professional Degree Theses

"The method of sampling and preparing samples of diamond-drill core, explained in this article, was used by the writer during a drilling campaign at Stirling, Cape Breton, Canada, in 1917"--page 4.

Metallurgical Processes Involving Surface Phenomena, Reginald Scott Dean

Professional Degree Theses

"Surface Tension of Liquid Metals. The surface tension of liquid metals is much greater than that of any other class of substances. Barkins lists the various substances in the following order as to surface tension; organic compounds, water, molten salts, metals"--Part I. General, page 1.

The Roasting And Magnetic Separation Of Wisconsin Ores And The Utilization Of The By-Products, Earl George Deutman

Professional Degree Theses

"In the Wisconsin field, the zinc blende is usually found associated with iron sulphide in the form of marcasite. This ore, after being milled and concentrated at the mines, is sent to separating plants for further treatment by roasting and magnetic separation, inasmuch as the mixed blende and marcasite concentrate, owing to the high iron content, is not suitable for the zinc smelter, and the magnetic separation scheme of separation must be resorted to"--page 1.

The Flood Control System Of Newport, Ark., Alvis Frederick Denison

Bachelors Theses

"Vast sums each year are expended on flood control projects on the Mississippi river and its tributaries. Millions of acres that were formerly subject to annual inundation caused by overflows, have been reclaimed for agricultural purposes, and each year, an increasing amount of this sort of work must be done as quicker run off and an increased volume caused by the clearing of land and drainage of natural storage, results in higher flood stages. Of course the greatest work of this kind has been done along the Mississippi river, where great levees on each side from Missouri to its mouth …

A Metallographic Study Of Copper Mattes, Edward James Torrence

Bachelors Theses

"The metallographic knowledge of copper mattes or mattes in general for that matter, although extensive, is, to put it mildly, rather diversified. One authority, for instance, believes that mattes are sulphide dissolving compounds there being no eutectiferous series involved. Another believes that the matte constituents enter into a eutectiferous series, compounds being present. Still a third contends that there are no compounds formed but that a simple eutectiferous range exists between certain limits outside of which the end members of the series form solid solutions with each other. In so far as there exists seeming absolute proof for all of …

Design And Construction Of The Experimental Mine, Robert Knox Stroup

Masters Theses

"The mining laboratory and experimental mine at the Missouri School of Mines was opened in 1913. At a suitable location, on the site of an old dolomite quarry, one and one half miles southwest of town a tunnel was started into the hillside and the necessary plant erected. This plant consisted of a fifty horse-power Erie Iron Works boiler of the modified locomotive type, and an Ingersoll Rand type 10 single stage duplex air compressor of a capacity of one hundred cubic feet of free air per minute. This plant was in operation during the fall months of each year …

Determination Of The Solubilities Of Lithium, Sodium, And Potassium Sulphates In Absolute Methyl And Ethyl Alcohols, Jennie Lynn Lenox

Masters Theses

"It was thought by the author that there might be some relation between the solubility of a salt in the alcohols and the position of those alcohols in the series of monohydric alcohols; that is, that there should be a definite increase or decrease in the solubility of any particular salt in going from a higher to a lower alcohol. The object of this paper was to find the solubilities of some simple salts in as pure alcohol as could be prepared, and to find any relationships if possible"--page 2.

Drill Steel Investigation, Richard J. Stroup, Kurt H. De Cousser

Masters Theses

"

Purpose of Investigation

To determine the best composition of a straight carbon drill steel for drilling in granite.

Method of Investigation

1. Obtain several brands of standard grade drill steel. Determine analysis and transformation points of each.
2. Determine that heat treatment which gives the best drilling qualities in granite.
3. Determine the micro-structure of such steel.
4. Obtain steel of a certain specified composition considered best for the conditions and compare the results on this steel with the results obtained on the market products.
5. Design of heating furnace for forging steels.

It will be observed from what follows that this outline was …

Drill Steel Investigation, Joseph Herman Rohloff

Masters Theses

"Several brands of standard grade drill steel were obtained [and tested]"--page 1.

High Speed Steel - Its History, Development, Manfacture, Metallography, And Constitution, Including An Extended Bibliography, James Presley Gill

Masters Theses

"There is no doubt but that the making of Steel was known and practiced by the early Greeks probably several centuries before the birth of Christ. There have been discoveries of pre-historic forges and smelters evidently used for the making of iron and steel and it is certain that implements made of these materials dates back to antiquity. As to the methods of making the steels of antiquity there is little known, but it is quite probable since iron has a strong affinity for carbon that in the forging of the iron it's contact with the carbonaceous fuel would absorb …

A Report On "Relieving Traffic Congestion On The Southern Pacific Between Oregon City, Oregon And Woodburn, Oregon.", Henri Chomeau

Missouri School of Mines and Metallurgy Reports

The Division Engineer of the Portland Division, Southern Pacific Company, ordered the Signal Supervisor of the same division, to devise some improvements in the signal system in order to make train movements between Oregon City, Oregon and Woodburn, Oregon more rapid and relieve congestion over this part of the single-track steam line. The following system has been worked out by the Signal Department.

Investigations To Determine A Possible Source Of The Carboniferous Sandstone Of The Ozark Region, John Hyer Bowles, Lewis Ely Davidson, William Ferdinand Netzeband

Bachelors Theses

"In preparing this thesis the object has been to determine, by comparisons, a possible source of the Carboniferous sandstones. It is perfectly obvious that the material came from some older formation. Considering all the possible sources from which the Carboniferous sandstone could have originated, we, have the Pre-Cambrian igneous rocks of the St. Francois Mountains, the basal Cambrian sandstone or the La Motte formation, the Roubidoux formation (chiefly sandstone), and the St. Peter formation (essentially sandstone)--Introduction, page 4.

A Report On Drill Steel Wear At Isle Royale Mine, Houghton, Michigan, James Joseph Dowd

Professional Degree Theses

"In 1917 the miners at the Isle Royale Copper Company's mines were constantly complaining about poor drills and an investigation was made to discover any reasons for the complaint"--page 1.

Flotation Tests On A Table Sludge From The Golden Rod Milling Company At Tar River, Oklahoma, William H. Kamp

Professional Degree Theses

"The purpose of this experimental work is to give to the operators of the Joplin District some facts concerning the possibilities of flotation in their district. An attempt will be made to show that high-grade concentrates can be made economically; also that the usual gravity concentration. It is believed that the oil and reagent used will not put a prohibitive cost burden upon the operators. It is, of course, realized that flotation concentrates of any zinc tenor bear a penalty because of the fineness of the product"--Introduction, page 3.

A Complete Coal Mine Survey, Harry A. Kluge

Professional Degree Theses

"As an introduction to this thesis, it would probably be well to give the laws of the State of Illinois relative to mine maps. These laws come under "An Act to revise the laws in relation to the coal mines and subjects relating thereto, and providing for the health and safety of persons employed therein. Approved June 6, 1911, inforce July 1, 1911. leaf 1911, page 388." Section 7 reads as follows: (a) The operator of every coal mine in the State shall make, or cause to be made, an accurate map or plan of such mine, drawn to a …

A Discussion Of The Geological Department Of An Oil Company. Part Ii. Report On Structure North Of Ochelata, Washington Co., Okla., Lawrence Joseph Zoller

Professional Degree Theses

No abstract provided.

The Heat Treatment Of Cast Steel, Fred Grotts

Professional Degree Theses

"Owing to many difficulties reported from the battle fields of France also from many sections of the United States, Mexico, Africa and South America relative to the functioning of the "Caterpillar" track an intensive research was begun early in the spring of 1919 to develop or perfect a material that could be made into intricate forms and which would have such physical properties as would withstand to a maximum degree, the abrasive action of rock and sand while at the same time having a high tensile strength and resistance to shock. A further requisite was that this material must be …

The Manufacture Of Sulphuric Acid By The Chamber Process At Isabella, Tennessee, Albert Leo Trent

Professional Degree Theses

"As the regions surrounding the smelteries are growing more densely populated, the companies operating in these districts find if necessary in many cases to take care of their waste gases which are injurious to the surrounding vegetation and thereby avoid many expensive lawsuits and claims from the land owners in the district...The smelters at once began to look around for some method of taking care of their fumes...The companies then began to install the more expensive process of handling their fumes by adding a sulphuric acid plant to their smeltery. This is very expensive to install but is not only …

Investigations To Determine A Possible Source Of The Carboniferous Sandstone Of The Ozark Region, John Hyer Bowles, Lewis Ely Davidson, William Ferdinand Netzeband

Professional Degree Theses

"In preparing this thesis the object has been to determine, by comparisons, a possible source of the Carboniferous sandstones. It is perfectly obvious that the material came from some older formation. Considering all the possible sources from which the Carboniferous sandstone could have originated, we, have the Pre-Cambrian igneous rocks of the St. Francois Mountains, the basal Cambrian sandstone or the La Motte formation, the Roubidoux formation (chiefly sandstone), and the St. Peter formation (essentially sandstone)"--Introduction, page 4.

The Mexican Oil Fields, Raul Chavez

Professional Degree Theses

"Owing to the large area involved in this paper it is proposed to give only briefly the history, geology and development of the oil industry in Mexico, as well as to discuss in a general way the present oil legislation which has brought so much comment in the papers and has raised to much diplomatic trouble between the Mexican and United States Governments. This discussion is therefore of a brief nature and only the most culminant features and details of the subject in mind are here treated. The information and data here given were accumulated during personal examination of the …

Geologic Conditions Affecting The Accumulation Of Oil And Gas In The Beggs District, Oklahoma, John Charles Miller

Professional Degree Theses

"It is generally accepted that there is lack of parallelism between surface and subsurface beds and between the productive sands in the Beggs District, a condition similar to that which obtains in the Cushing Field. The explanation of this condition as given on page 31, Bulletin 658, U.S. Geological Survey, is: 1) The difference in resistance to compression of the hard and soft beds of which the formations of the Cushing Field are composed; 2) The lenticular form of the Bartlesville sand (the equivalent of the Glen; Gas of Morris pool); 3) One or more unconformities between surface beds and …

Mine Surveying In The Missouri Coal Fields, Edgar C. M. Burkhart

Professional Degree Theses

"The mines surveyed and included in this thesis are certain mines in the foremost and second largest producing counties in the state, namely Macon and Adair county. This thesis also includes surveying at one mine in Randolph County ... The mines included in this thesis operate mainly in the Bevier bed. This seam contains an average of 41 inches of coal in Adair County and is somewhat thicker in Macon and Randolph County. All mines in the Bevier bed are operated on the room and pillar system of mining with about 50 to 60 percent extraction in Adair County and …

Investigations On Oklahoma Chats, Homer Chalmers Kerr, August Francis Delaloye

Bachelors Theses

"That the tailings piles of the Joplin and the Oklahoma zinc mining fields contain zinc in commercial quantities is a known fact. Realizing this fact, a number of experiments were performed to determine whether or not this zinc could be extracted. The chats for this work were obtained from the Fort Worth Mill at Pitcher, Oklahoma"--Introduction, page 1.