Engineering Commons^™

Solution Of Some Chemical Plant Problems Associated With The Manufacture Of Insecticides, Lawrence Ralph Hinken

Professional Degree Theses

"This thesis describes the solutions of a variety of developmental, production, and general engineering problems encountered in a chemical plant. This plant produces resins, solvents, and insecticides. Most of the problems considered here are patented or are of a secret nature. These details are, in the main, satisfactory temperatures, molar ratios, times of reaction, and space-time data. Therefore, it is the purpose of this discussion to be general but, in the main, to give the outline of the thinking which derived these solutions. Some of these solutions were of minor economic value, some were vital to the success of the …

Design Of A Precast Concrete Deck Girder Highway Bridge, Robert V. Gevecker

Professional Degree Theses

"In the Fall of 1951, as a result of an agreement between the Portland Cement Association and the Missouri State Highway Department, with the approval and good wishes of the United States Department of Commerce, Bureau of Public Roads, the State Highway Department embarked on a program to design and construct several precast, prestressed, and precast-prestressed concrete highway bridges"--Introduction, page 1.

The purpose of this extensive program being to indicate to State Highway officials and other interested parties the advantages of these types of construction. In the words of Mr. S. W. O'Brien, District Engineer for the Bureau of Public …

The Closure Of Thin Wall Pressure Vessels, Archie W. Culp Jr.

Masters Theses

"The object of this thesis is to find various methods of closing thin wall aluminum cylinders. Such a closure must be strong enough, that when internal pressure is applied, ultimate failure will occur along a longitudinal element of the cylinder and not at the closure. Moreover, such a method must not only be mechanically sound, but it must be readily adaptable to mass production"--Introduction.

Investigation Of Soil Bricks As A Building Material, Ahmet Ilter

Masters Theses

"The need of a cheap construction material for small village farm construction in Turkey makes soil-cement a most desirable material. What is more, as far as the author knows, soil-cement has not found any application in farm house construction in Turkey as yet. So the author, being acquainted with his native country's house construction problem, and seeing the suitable application soil-cement have on such construction, came to the decision that he should investigate this problem thoroughly.

The main objective of the tests run in this investigation will be to find the strength of different samples of soil-cement. The stabilizer used …

A Study Of The Bonding By Air-Setting Refractory Mortar At Elevated Temperatures, Bhikhubhai Mahadeo Sedalia

Doctoral Dissertations

"The importance of a suitable material for the laying of bricks in furnace and kiln construction has been recognized by the refractory industry for a long time. It is necessary that a strong bond should develop between the bricks to impart strength to the entire construction work. A weak joint would form the weakest link and dangerously weaken the whole structure.

Such being the importance of the bond, the refractory industry has made quite an effort to develop jointing materials which would produce strong bonds. During the last two decades, due to intensive research and development work, many good bonding …

Carbon Monoxide Attack Of Refractories, William A. Frad

Doctoral Dissertations

"The disintegration and failure of fire clay refractories due to the action of carbon monoxide has been studied tor a period at about fifty years. The most important application is in blast furnace refractories. Similar failures due to carbon deposition, involving other gases such as methane, have been noted and less extensively studied. Failures due to the action of gases other than carbon monoxide are beyond the scope of this thesis. Occasional attempts to find some agent to prevent disintegration have been mentioned in the literature. In this study the number of such substances and the results of their action …

A Fundamental Study Of Clay Drying Using Ware Of Large Cross Section, Robert F. Grady Iii

Masters Theses

"The drying of clay has been studied extensively in the past by many investigators, some of whom attempted to relate this information to the structure of clay and thereby develop a more vivid picture, while others studied the mechanism of drying in its own right in order to present a useable theory that would allow improvements in the drying operation.

At present the literature is unable to present a theory of the mechanism of drying that is sufficiently general to cover the observed aspects of clay drying. Many and varied mechanisms are presented, but correlation is seldom completely evident between …

The Use Of A Steady State Flow Reactor In The Study Of Rapid Gas Phase Reactions, Ormond Kennedy Lay

Masters Theses

"The demonstration of the feasibility of rocket propelled devices for various purposes within the past few years has initiated an intensive search for suitable reactants for use as rocket fuels. Consequently, the investigation of the properties of chemical reactions which rapidly liberate large quantities of energy has assumed major importance. In order that such reactions may be adapted to practical use as rocket propellants knowledge of the characteristics of these reactions is required. Properties such as+ the mechanism of the reaction, the speed of the reaction under varied conditions of temperature, pressure and concentrations, the conditions required for the initiation …

An Investigation Of Continuous Steel Beams In The Plastic Range, Robert Adams Shoolbred

Masters Theses

"The purpose of this thesis is to investigate the action of beams in the plastic range. The test specimen will be a 4WF 13 structural shape continuous over three supports having equal span lengths of seven feet. Three types of loading were chosen. The first loading will be concentrated in the center of each span. The second loading will be a concentrated load in the center of one span only. The third loading will be the settlement of the two end supports until a plastic hinge forms at the center support, then the two spans will be loaded with concentrated …

Horizontal Pressures On Retaining Walls Due To Line Surface Loads, John B. Heagler

Masters Theses

"Among the oldest types of structures with which engineers have had to deal are those which serve to laterally restrain masses of earth, or to prevent earth embankments from assuming their natural angle of repose. This is necessary where space is limited or the natural slope would encroach upon other property. These structures, usually called retaining walls, are subjected to forces, both lateral and vertical due to the pressures exerted by the backfill material and any loads imposed on the backfill material. The first step in the design of the retaining wall is to determine the magnitude, position, and line …

Testing Of Missouri Shales For Light Weight Aggregate Production, Jerry D. Plunkett

Masters Theses

"The original objective of this investigation was to determine by testing those clays, shales, and loesses occuring in Missouri in large deposits (over 15 feet in thickness with little overburden), which would be suitable for the production of light weight aggregate. The second objective was to investigate the mechanism of bloating as related to the physical and chemical properties of the above materials, and by using these relationships cause clays which do not naturally bloat, to bloat using some addition. The use of additives would permit the economical use of material closer to the market in many instances.

After the …

The Design And Construction Of An Electronic D-C Analog Computer, Frederick R. Wagner, William A. Paar

Masters Theses

"To make this project realizable with the funds available and in the time allowed, and to set forth some definite goals, the following objectives were adopted:

1. Design, construct, and place in working order a d-c electronic analog computer capable of solving 4th order linear differential equations with constant coefficients.
2. Include in the design provisions for real time computation, and also fast, repetitive operation.
3. Provide for later expansion of the computer installation.
4. Limit expenditures to $700"--Introduction, page 4.

Heat Flow In A Two-Dimensional Steady-Flow System Without Radial Symmetry, George H. Parharoglu

Masters Theses

"As the extent of the science of heat conduction depends on the multiplicity of the boundary conditions that can be applied to the basic differential equation, a particular case in which the use of one set boundary conditions for the development of the general equation for the temperature distribution as well as the the amount of heat flow in a steady-state, two-dimensional heat flow system with a source of heat plased at the center of or along the axis of a cylinder, and without radial symmetry has been the object of this problem. Radial symmetry means the variation of temperature …

Deposition Of Metallic Coatings From Fused Salt Baths, Andrew Hessler Larson

Masters Theses

"This thesis is the result of an investigation undertaken to study some of the important factors affecting the deposition of metallic diffusion coatings on other metals immersed in a fused salt bath….

There are many methods which have been devised to obtain diffusion coatings on various metals. One which is quite well known and used commercially is the process of “chromizing” which produces a diffusion layer if chromium on another metal. One method of “chromizing” consists of immersing the specimen to be coated in a mixed chloride fused bath containing chromium metal flakes. Another method consists of packing a low …

Effect Of Carbon Content In Steels Upon The Deposition Of Titanium From A Fused Salt Bath, Reinhard Paul Abendroth

Masters Theses

"STATEMENT OF PROBLEM Previous work done at the Missouri School of Mines and Metallurgy on the deposition of titanium upon various metals, especially iron and steel, bas shown that titanium can be deposited upon ingot iron and. low carbon steels with comparitive ease. Difficulty was encountered in attempts to deposit titanium upon steels of higher carbon content and upon cast irons.

For this reason, it was decided to investigate more thoroughly the relationship between the carbon content of various steels and the quality of titanium coatings deposited on these steels. Once this relationship had been established, a suitable theoretical explanation …

Corrosion Products Of Titanium In Fused Salt Baths, Kai-Chai Chiou

Masters Theses

"Titanium is gaining great interest in the modern metal industry because of its natural abundance and its desirable physical and chemical properties. Among them, its excellent corrosion resistance, such as the resistance to normal atmosphere attack, humid and saline atmosphere attack, sea water attack, and nitric acid attack, is the most prominent characteristic being welcomed by the engineers. The usefulness of titanium would be greatly increased if it were possible to plate titanium on other metals, thus increasing the corrosion resistance of these other metals.

Much concern, at present, has been given to the possibilities of the electrodeposition of titanium …

Mechanism And Measurement Of First Stage Graphitization In White Cast Iron, David S. Gould

Masters Theses

"The original object of this thesis was to ascertain if coercive force measurements could be used for the determination of degree of malleablization in malleable iron. Since first stage graphitization was involved, it was only natural that an interest in the mechanism of first stage graphitization developed. The investigation which resulted from this interest was done primarily for the edification of the author, however it was subsequently deemed of enough importance to be included in this thesis. For this reason the thesis may appear at times to deviate from the original objective"--Preface, page iii.

Tunnel Rehabilitation, Jay C. Dotson

Masters Theses

"This paper is an outgrowth of research conducted at Missouri School of Mines and Metallurgy over a two year period. The purpose of the study is to assemble into one volume information that is pertinent to the rehabilitation of tunnels. Notwithstanding the voluminous size of the paper, much descriptive material necessarily has been omitted because of the far-reaching scope of tunneling practices and of the specialized fields therein. An extensive bibliography has been prepared to supplement the material that has been selected for presentation. Through consultation with tunnel men of all ranks, observations in the field, and an intensive search …

An Investigation Of The Characteristics Of High Alumina Refractory Castables, Gajendra Nath Mohanty

Doctoral Dissertations

"Refractory castables or concretes, a comparatively new member of the refractories family, are an admixture of highly aluminous cements and graded refractory aggregates, blended in predetermined proportions very much like structural concrete. The refractory aggregates must contain a large amount of fines contrary to the requirements of ordinary concrete. Unlike the Portland cements, which are mainly combinations of calcium silicates, the highly aluminous cements are predominantly calcium aluminates. They are comparatively of a refractory natures, having the hydraulic setting property combined also with high early strength. The discovery of the fact that these refractory concretes could be cast, in situ, …

The Rate Of Dissolution Of Aluminum In Hydrofluoric Acid, Yen-Ngen Wang

Doctoral Dissertations

"Pure aluminum has a relatively low strength, and its use is, therefore, rather limited. However, the resistance of pure aluminum to the attack of acids and many neutral solutions is higher than that of less pure aluminum or most of the aluminum-base alloys. For this reason, alclad alloy sheets, are made with a coating of pure aluminum on one or both sides of an aluminum alloy core. The coating is metallurgically bonded to the core over the entire area of contact. Thus the coating electrochemically protects the core from corrosive attack.

Aluminum is more negative in the electrochemical series than …

Hydrogen Overvoltage On Titanium, Sheng-Tai Shih

Doctoral Dissertations

"The hydrogen overvoltage has been defined as the difference between the potential of the working electrode (cathode) and the theoretical reversible value for the same solution. This definition brings out the difficulty involved in the measurement of the "theoretical reversible potential for the same solution” as the potential of the hydrogen electrode in such a solution is usually different from the value of a standard reversible hydrogen electrode, for which the activity of hydrogen ions is set as being “1” and the potential arbitrarily set as being “0”. Besides, it is sometimes necessary to add addition agents to the solution …

A Study Of The Deformation Texture And Its Variation In Cold Drawn Nickel Rods, Krishan Kumar Tangri

Doctoral Dissertations

"The production of rods by cold drawing is a development of recent years as compared to other methods of fabrication. Though a good many investigations correlating the observed mechanical properties to the mill practices employed have been reported, the results nevertheless are more of a qualitative and empirical nature. It is well known that the physical properties of a metal product are related to its deformation textures which are characteristic of the metal and the fabricating method used. Thus a study of the deformation textures of cold-drawn rods, specially by x-ray diffraction techniques should provide a much more precise and …

Metallurgical Pulp Mill Processing For The White Pine Copper Company Project, White Pine, Michigan, Steve Theodorides

Professional Degree Theses

No abstract provided.

Adaptation Of Diesel Rubber-Tired Loading Equipment To A Bedded Fluorspar Mining Problem, Robert Gill Montgomery

Professional Degree Theses

"The fluorspar-zinc orebody at Minerva No. 1 mine near Cave in Rock, in Hardin County, Illinois, would have been classed as non-commercial before the days of flotation milling and mine mechanization. The bulk of the ore requires fine grinding for acceptable beneficiation, and the assay of the head feed runs considerably lower than grades thought to be commercial in the fluorspar district prior to 1940.

However, the reserves found by drilling before the decision was made to invest in mine development, and the construction of a two-product, 250-ton, flotation mill, with complete power plant and surface shops, exceeded 600,000 tons. …

Organization And Execution Of A Major Industrial Electrification Project, Robert F. Mccaw

Professional Degree Theses

"All emergencies, especially those created by war, have marshalled the industrial might of nations, among other things. World War II was no exception; in fact, it produced the greatest expansion of industrial facilities in history.

Most all plants in the country underwent some degree of expansion. In certain industries, the experienced workers of existing plants were employed as nuclei for the organization of the gigantic new plants required to produce the arms and equipment necessary to the conduct of a global war.

This thesis pertains to one phase of the design and construction of such an enterprise. This particular phase …

The Preparation Of Zirconium Powder, Herbert S. Kalish

Professional Degree Theses

"The preparation of zirconium powder by several different methods is fully described and evaluated. Most of the methods described are of a rather classical nature and these methods are discussed as taken from their original sources with suggestions for possible streamlining. Flow sheets are provided.

The first series of steps to produce zirconium powder is almost invariably the production of pure zirconium tetrachloride or pure zirconium oxide from the tetrachloride. The processes described include the sodium reduction of zirconium tetrachloride, sodium reduction of the double alkali fluorides, the calcium reduction of zirconium oxide, hydrogen embrittlement and comminution of reduction products. …

The Bloating Of Missouri's Shales, Peter Kurtz Jr.

Masters Theses

"The first objective of this investigation was to determine which deposits of clays, shales, and loesses in Missouri are suitable for use in the production of lightweight aggregate by virtue of their expanding characteristics upon heating. The second objective was to determine, if possible, commercially feasible additions that will produce the bloating property in shales that do not naturally bloat.

There are two conditions which must be met in firing in order to bloat a clay or shale. First, a gas must be formed and evolved during firing. Second, enough glass of the proper viscosity must be formed to trap …

Crimp Method Of Closure Of Small Pressure Vessels, Zafiri Bersu

Masters Theses

"The object of this thesis is to design a means of closing the ends of thin aluminum alloy tubing in the 1” O.D. to 2” O.D. by .035 to .065 inch thick sizes, so that the closure will withstand internal hydrostatic pressure sufficient to burst the tube along the longitudinal element.

The aim is to approach the ultimate mechanical efficiency possible, and at the same time to keep actual production in mind.…

Summarizing the aims of this investigation, it can be said that the objectives of this investigation are:

1. To design ends for closed vessels.
2. To form the designs.
3. To …

The Lattice Constant And Coefficient Of Expansion Of Chromium, Chao-Ching Weng

Masters Theses

"The most important use of chromium, other than as an alloying element in the manufacture of stainless steel, is for electroplating; to form a coating on other metals for corrosion prevention in order to procure longer life, and to achieve a decorative effect.

The physical properties of chromium are important in the effectiveness of its uses, and its lattice constant, as well as coefficient of thermal expansion, seem worthy of exact determination.

A number of research workers, over a span of thirty years, have spent considerable effort in determining the aforementioned constants. However, their results do not check, and the …

An Investigation Of The Use Of Surface-Active Agents In The Secondary Recovery Of Oil By Water Flooding, Robert P. Schafer

Masters Theses

"The importance of producing oil cannot be emphasized enough in this modem world. Therefore, when primary methods of production seemingly exhaust the oil reservoirs, a secondary method of producing more oil is a necessity. At the present time, secondary methods of oil recovery have developed into a large industry. They are not a new development. The need of introducing compressed air or air-gas mixtures into the wells to increase production was quickly realized. Water flooding methods followed, and at first were restricted to the Eastern fields. Later, about 1935, systematic water flooding methods were developed and applied all over the …