Engineering Commons^™

An Analysis Of A Quadrature Double-Sideband/Frequency Modulated Communication System, Denny Ray Townson

Masters Theses

"A QDSB/FM communication system is analyzed with emphasis placed on the QDSB demodulation process and the AGC action in the FM transmitter. The effect of noise in both the pilot and message signals is investigated. The detection gain and mean square error is calculated for the QDSB baseband demodulation process. The mean square error is also evaluated for the QDSB/FM system. The AGC circuit is simulated on a digital computer. Errors introduced into the AGC system are analyzed with emphasis placed on nonlinear gain functions for the voltage controlled amplifier"--Abstract, page ii.

The Evaluation Of Radar Guided Missile Performance Using Various Target Glint Models, Franklin Delano Hockett

Masters Theses

"A radar guided missile seeker approaching a target arrives at a crossover point beyond which the entire target is illuminated by the missile seeker's radar antenna beam. When this occurs, for a complex target, the radar senses a time changing target center location which may greatly complicate the terminal tracking portion of the seeker's flight. This thesis documents various glint models in use today and compares the performance of these models by using a seeker model to determine the effect of glint on terminal tracking performance. A large volume of data has been compiled describing various radar characteristics of complex …

Carburization Of Type 316l Stainless Steel In Static Sodium, F. B. Litton, Arthur E. Morris

Materials Science and Engineering Faculty Research & Creative Works

The transport of carbon from an iron-87 wt.% carbon alloy through static sodium to Type 316L stainless steel was investigated at temperatures of interest to the liquid-metal fast-breeder reactor (LMFBR) program. The rate-controlling step for the experimental geometry employed was the diffusion of carbon in the source. © 1970.

Thermal Expansion Of Orthorhombic Pbo, Charles A. Sorrell

Materials Science and Engineering Faculty Research & Creative Works

Thermal expansion of orthorhombic PbO was investigated by high‐temperature X‐ray diffraction. The coefficients in the a0, and c0 directions are equal and Pb–O chains extended in the a0 direction and bonded into layers in the b0 direction; appreciable Pb–Pb bonding is indicated. Coordination and bond distances observed in PbSiO3 and lead silicate glasses, which are similar to those of massicot, and PbnOn polymeric units reported in PbO vapor are interpreted as additional evidence of the importance of PbO chains as structural entities. Copyright © 1970, Wiley Blackwell. All rights reserved

Thermal Expansion Of Tetragonal Pbo, Charles A. Sorrell

Materials Science and Engineering Faculty Research & Creative Works

Thermal expansion of tetragonal PbO, investigated by high‐temperature X‐ray diffraction in vacuum, is nearly isotropic, with the coefficient in the c0 direction only slightly greater than that in the a0 direction. Volume thermal expansion is only slightly greater than in massicot. Retardation of the litharge‐massicot transformation is tentatively interpreted as the result of very low oxygen partial pressures caused by catastrophic oxidation of the stainless‐steel sample holder and resulting oxygen scavenging by lead vapor. Copyright © 1970, Wiley Blackwell. All rights reserved

Exact Solution For A Model Of Dislocation Pipe Diffusion, J. Mimkes, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

The dislocations are treated as an ideal array of parallel pipes of radius and diffusivity Dp embedded in the bulk material of the diffusivity Db. The exact solution of this problem of diffusion along semi-infinite edge dislocations is presented for cubic, tetragonal, and hexagonal crystals. The solution makes it possible to evaluate the dislocation pipe radius a and the ratio of diffusivities from one experiment. It is applied to experimental data for self-diffusion in tellurium available in the literature. The results of the calculations are a dislocation pipe radius a=(1.5 0.5)x10-4 cm and an activation energy for the pipe diffusion …

Radiative Heat Transfer Analysis From A Heated Airport Runway To Fog, Gordon L. Scofield, Tom J. Love

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Radiative heat transfer between a plane source and an aerosol is investigated through the Monte Carlo method. Thermal energy is transferred from a long rectangular source to monodisperse natural fog models. The analysis is only for radiative transport and does not include convection which would be coupled in a complete analysis. Direct energy transfer to the droplets of the aerosol is investigated for values of extinction coefficient of 10 km-1 and 80 km-1, absorption coefficient to extinction coefficient ratios of 0·4 and 0·5, and scattering functions of the strong forward and isotropic types. Monochromatic radiation at a wave length of …

Stability Of Asymmetric Hydrodynamically Developing Channel Flows, T. S. Chen, E. M. Sparrow

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Linear stability is studied for developing channel flows induced by asymmetric velocity profiles at the inlet. Neutral stability curves and axial variations of the critical Reynolds number are presented, showing greater stability for more skewed inlet profiles.

Investigation Of Liquid Carryover In The Girdler-Sulfide Process For Production Of Heavy Water At The Aec Savannah River Plant, Samuel Clark Allen

Doctoral Dissertations

"An investigation of the causes of liquid carryover in the Girdler-Sulfide process for the production of heavy water was carried out using 12 samples of carbon collected over a one-year time period. Organic impurities from the feedwater were concentrated by adsorption on carbon. Studies of methods for the drying of carbon showed that freeze drying resulted in the minimum reproducible moisture retention without gross loss of the adsorbed organic materials. Rotary vacuum evaporation and air drying of beds of carbon were proven to be less efficient. A study was made of the variables which affect extraction efficiency by the Soxhlet …

Linear Regression Models Of Sound Velocity In The North Atlantic Ocean Below A Critical Depth, Richard Roland Kunkel

Doctoral Dissertations

"Sound velocity models currently in use by the U. S. Navy require difficult data sampling at great expense. This study is to investigate the feasibility of a sound velocity model dependent only upon position that would be valid for a selected, reasonably large, near homogeneous area of the ocean. The most important position parameters are latitude, longitude, and depth. To accomplish this objective a critical depth of 2500 meters was established for an 8° by 20° rectangle of the Sargasso Sea which lies within the North Atlantic Ocean. The critical depth is defined as the depth at which the characteristics …

Mass Transfer From Spherical Gas Bubbles And Liquid Droplets Moving Through Power-Law Fluids In The Laminar Flow Regime, Cheng-Chun Huang

Doctoral Dissertations

"Continuous phase mass transfer coefficients are presented for internally circulating spheres of a Newtonian fluid traveling through a power-law type continuous phase in to so-called creeping-flow region. The Nakano and Tien stream functions allow the Sherwood number to be determined as a function of the Peclet number, power-law index, and a viscosity ratio parameter. The Hirose and Moo-Young relation is shown to be a limiting case of this solution. Mass transfer rates increase as the fluids become more pseudoplastic and/or the continuous phase consistency index increases, all other factors held constant"--Abstract, page ii.

Numerical Simulation Of Forward Combustion In A Radial System, Tommie C. Wilson

Doctoral Dissertations

"A generalized mathematical model is described for the thermal recovery of oil in a radial system in which there are conductive heat losses to the surrounding formations, three phase fluid flow, conductive-convective heat transfer within the producing formation, combustion, and aqueous-phase changes considered. The mathematical form of the temperature equation requires that numerical solutions be obtained with a digital computer for which the numerical approximations of the partial differential equations are presented and the results discussed. The analysis is applied to field size simulations of a forward combustion project to permit direct field analyses of significant importance for accurate reproductions …

Some Effects Of Oh Groups On Sodium Silicate Glasses, Mokhtar Sayed Maklad

Doctoral Dissertations

"Glasses of various compositions in the Na₂O-SiO₂ system were prepared with different levels of OH concentration. Phase separation kinetics, thermal expansion, radiation induced optical absorption, and internal friction of these glasses were studied. The increase in OH content in these glasses was found to (a) enhance the rate of phase separation; (b) increase thermal expansion above the glass temperature and change the dilatometric softening temperature in a way that depends on microstructure; (c) increase the radiation induced optical absorption bands associated with positive hole centers and decrease those associated with electron trap centers; and, (d) decrease the low temperature alkali …

The Cathodic Reduction Of Maleic Acid, Show Yih Hsieh

Doctoral Dissertations

"The electrochemical reduction of maleic acid (0.0003 to 0.3 M) was studied on Hg, 0.5% Bi(Hg) amalgam, 5.0% Bi(Hg) amalgam, and Bi cathodes in 1 n H₂SO₄-K₂SO₄-KOH electrolytes (pH 0.3 to 4.0) at 60°C. The maleic acid was converted to succinic acid with high efficiencies (86 to 100%) on all cathodes. Polarization curves with linear Tafel sections were found. All the cathodes had similar kinetic parameters...A reaction mechanism consistent with the experimental observations is proposed..."--Abstract, pages ii-iii.

Temperature Variation In Distribution Of Relaxation Times In Aluminosilicate Glasses, David Wayne Moore

Doctoral Dissertations

"The distribution of relaxation times for the alkali peak in a Li₂ O·A1₂O₃ ·2.0SiO₂ glass and for the mixed alkali peak in a 0.5Li₂O·0.5Na₂O·A1₂O₃·2.OSiO₂ glass was studied using the internal friction technique. A lognormal distribution of relaxation times provided the best agreement with the experimental data. The ß parameter of the lognormal distribution function, which is related to the half-height peak width, varied with temperature, indicating that the distribution of relaxation times is dependent upon the activation energy and the activation entropy of the relaxation mechanism. The major contributor to the distribution of relaxation times is a wide distribution in …

Discrimination Of Signal And Noise Events On Seismic Recordings By Linear Threshold Estimation Theory, David Nuse Peacock

Doctoral Dissertations

"The object of this study is the investigation of a linear threshold element technique for identifying surface multiples on a single seismic trace. Traces of seismic events were generated which contained primaries, surface multiples, and various levels of Gaussian random noise. Since it was necessary to separate the events as much as possible, the traces were subjected to pulse-compression deconvolution processing prior to LTE analysis. Mean frequency, peak frequency, amplitude spectrum variance, periodicity, and polarity were employed as pattern parameters. A set of weights was found that would maximize the moment of inertia of the S line distribution of the …

Electrode Reactions In Zinc Electrolysis, Ernest R. Cole

Doctoral Dissertations

"The effects of temperatures from 0°C to 50°C and current densities from 10 asf to 200 asf on the current efficiency in the electrolysis of pure zinc sulfate solutions (65 gpl Zn⁺⁺ - 200 gpl H₂SO₄) were determined. Pure platinum and platinum coated titanium anodes were used with an aluminum cathode. Platinum anodes were not inert at certain combinations of temperature and current density, and platinum acted as a low overvoltage impurity causing resolution of the cathode deposit. Orientation of the zinc deposits was found to vary with temperature and to have a distinct relationship to current efficiency. Preconditioning of …

Penetration In Granite By Shaped Charge Liners Of Various Metals, Hemendra Nath Kalia

Doctoral Dissertations

"The penetration in Missouri red granite by cylindrical charges with metal liners of aluminum 2011 (T-3), aluminum 7075 (T-6), yellow brass, monel, maraging steel (vascomax 250), and copper was measured. Metals having high ductility and moderate compressive strength penetrated deeper than high strength maraging steel. Aluminum required a greater standoff for optimum penetration than the other metal liners tested. Preliminary metallographic studies of the liner metals and slugs showed that the grains had elongated along the slug axis. The metals containing zinc formed very small or no slugs. The granite grains were highly fractured. The holes were discolored and coated …

Iddap -- Interactive Computer Assistance For Creative Digital Design, Richard Franklin Crall

Doctoral Dissertations

"A new computer-aided design program to assist in the initial phases of logical design is described. The program, intended for use via an on-line remote terminal, will allow the designer to study and experiment with design alternatives during the initial creative design phases. An ALGOL-like language is used for specifying the system being designed. In addition to simulating the design, the program allows the user to perform on-line design changes, reorganize data and generate timing diagram information"--Abstract, page ii.

Diffusion And Internal Friction In Sodium-Rubidium Silicate Glasses, Gary L. Mcvay

Doctoral Dissertations

"The internal friction and self diffusion coefficients of sodium and rubidium ions for (1 - X) Na₂O·X Rb₂O·3 SiO₂ glasses have been measured. The diffusion measurements employed radioactive isotopes and a thin sectioning technique and extended from 350 to 500°C. Internal friction measurements were made from -150 to 500°C and at frequencies of 0.05 to 6000 Hz. The maximum height for the mixed alkali internal friction peak occurs at the composition where the sodium and rubidium diffusion coefficients are equal. It is concluded that the mechanism responsible for the mixed alkali peak is a cooperative rearrangement of sodium-rubidium ions and …

The Oxidation Kinetics Of Liquid Lead And Lead Alloys, Thomas Edward Weyand

Doctoral Dissertations

"Liquid lead and lead-silver alloys were investigated to determine the rates and products of oxidation in pure oxygen at temperatures of 350 to 600°C. The kinetic data were determined using a Cahn electro-balance. Liquid lead was found to follow a cubic rate of oxidation between 350 and 400°C. A parabolic rate was found at temperatures above 400°C. 0.496% silver and 2.258% silver alloys followed a cubic rate of oxidation from 350 to 550°C and tended to approach a parabolic rate of oxidation above this temperature. Silver additions were found to increase the rate of oxidation as compared to the pure …

A Computer Simulation Of Mine Air Shaft Thermodynamics, Ambyo Sumopandhi Mangunwidjojo

Doctoral Dissertations

"Several earlier investigations have been conducted into various aspects of heat problems in underground mines. The application of general gas laws and thermodynamics in the approach of mine ventilation has been helpful in elucidating certain difficulties associated with the subject. By combining several of the techniques perfected by these researchers and applying Carrier's method of calculation for heat flow from exposed rock strata into a workable plan, a method was developed whereby it is possible to accurately and conveniently predict the quality of working environment at any point within a deep mine. The findings of this study may be of …

Higher Space Mode Analysis Of A Large Cylindrical Pulsed H₂O System, Harold David Hollis

Doctoral Dissertations

"By utilizing a geometrically centered pulsed source internal to a large (B²_g) ≈ 0.002) cylindrical H₂O system, the neutron flux was measured as a function of position and time. A least square fit of the data yielded the fundamental and five higher decay constants and amplitudes of the thermal neutron flux. Symmetrical and enhanced neutron densities were obtained as a result of the internal source. Long waiting times were unnecessary and data acquisition was accelerated.

The decay constants were found to be independent of position, pulse width, counting time and rates, method of normalization, or waiting time. …

Synthesis Heuristics For Large Asynchronous Sequential Circuits, Robert Judson Smith

Doctoral Dissertations

"Many well-known synthesis procedures for asynchronous sequential circuits produce minimal or near-minimal results, but are practical only for very small problems. These algorithms become unwieldy when applied to "large" circuits with, for example, three or more input variables and twenty or more internal states. New heuristic procedures are described which permit the synthesis of very large machines. Although the resulting designs are generally not minimal, the heuristics are able to produce near-minimal solutions orders of magnitude more rapidly than the minimal algorithms. A method for specifying sequential circuit behavior is presented. Input-output sequences define submachines or modules. When properly interconnected, …

Model-Referenced Adaptive Control Of Plants With Noise And Inaccessible State Vector, Donald James Schooley

Doctoral Dissertations

"The problems of process noise, measurement noise, and inaccessible process state vector in the model-referenced system of Shackcloth-Butchart-Parks (SBP) are investigated. Since the system no longer possesses a static equilibrium point, the concept of asymptotic stability does not apply. However, by using Liapunov-like ideas, the error between the plant (process plus controller) and the model is shown to enter a region about the origin if certain bounds are known. A possible technique for reducing the size of this region is to feedback a function of the error into the plant's input. Several methods of circumventing the inaccessible state vector problem …

Use Of The Turbulence Kinetic Energy Equation In Prediction Of Nonequilibrium Turbulent Boundary Layers, William Madison Byrne Jr.

Doctoral Dissertations

"A differential method is proposed for the prediction of a broad range of turbulent boundary layers of engineering and scientific interest. A digital computer program is presented which is applicable to boundary layers with positive, negative, and zero pressure gradient in the main-stream direction as well as boundary layers with suction, blowing or zero mass addition at the wall. The turbulence kinetic energy equation is solved simultaneously with the longitudinal momentum and continuity equations to provide an independent means for determining the effective viscosity which makes allowance for "history" effects in the flow. It is shown that the prediction method …

Binary Molecular Diffusivities In Liquids: Prediction And Comparison With Experimental Data, Ronald Dean Mitchell

Doctoral Dissertations

"The Eyring rate theory equation has been modified successfully to enable predictions of binary molecular diffusivities for a wide variety of liquid-liquid systems. The activation free energy for binary diffusion has been evaluated in terms of the activation free energies for self diffusion of the solvent and solute. This was accomplished through the use of regular solution theory by relating the bond breaking energy of the jump step to the bond breaking energy in evaporation. Diffusivities estimated by this equation and the equations developed by Olander, by Gainer and Metzner, and by Wilke and Chang were compared with experimental data. …

Optimizing Diesel Engine Efficiency Using The Controllability Of A Variable Ratio Hydrostatic Transmission, Gordon Wright

Doctoral Dissertations

"A linear mathematical model of a diesel engine, hydrostatic transmission, and electric dynamometer system was developed. This model was used as an aid in designing a single input controller which regulates engine speed to optimize efficiency while maintaining constant transmission output speed under changing load conditions. Compensation was necessary to stabilize the system because of positive feedback in the engine control system. The compensated system's response was compared to that which was predicted analytically. The analytical model was then extended to design the control system parameters to operate the engine and transmission in a representative vehicle"--Abstract, page ii.

Voids In Neutron Irradiated Aluminum, Nicholas H. Packan

Doctoral Dissertations

"Void formation in high purity aluminum resulting from irradiation to fluences between 1.5 x 10¹⁹ and 1.6 x 10²² neutrons/cm² (E > 0 .1 MeV) at a temperature of 55 ± 5ºC was studied, primarily by means of transmission electron microscopy. In particular the effects of neutron fluence and flux were examined, as well as the possible influences of both preexisting and transmutation-produced impurities. A very low concentration of voids (about 10¹²/cm³) resulted from irradiation to 1.5 x 10¹⁹ neutrons/cm²; they averaged about 150 Å in diameter. Void concentrations and sizes increased with fluence, reaching values of 6 x 10¹⁴ voids/cm³ …

A Model For Predicting The Energizing Transients Of Station Capacitor Banks, Dennis Oliver Wiitanen

Doctoral Dissertations

"A model for predicting the transients associated with energizing ungrounded wye-connected station capacitor banks was developed. The model has the capability of simulating non-simultaneous operation of the breaker poles, pre-insertion resistors, and the presence of previously energized capacitor banks at the same station. To investigate various system representations, a computer solution of the transient response of an arbitrary network and the computer solution of the generalized Thevenin impedance of a complex network are presented. A simple power system is defined and used to investigate the modeling of various system components, using the computer solution methods. Simplification of the model due …