Engineering Commons^™

A Simulation Study Of Surfactant/Foam Processes In Shallow Subsurface Remediation: Using Foams For Mobility Control Vs. Blockage, Betty Cepeda

LSU Master's Theses

Many shallow ex-situ and in-situ remediation treatments come from the contamination of underground soils and groundwater sources by organic hydrocarbon components called non-aqueous phase liquids (NAPLs). These contaminants, if leaking, can impose long-term threats causing environmental and health concerns. One of the versatile in-situ remediation techniques is using surfactant/foam processes that can overcome subsurface heterogeneity and improve NAPL removal.

This simulation study investigates surfactant/foam processes, especially focusing on two different roles of foams during the treatment: foams for “mobility control” vs. foams for “blocking”. The first is based on the actual operations carried out in the pilot-test site for 23 …

The Impact Of Case Management Intervention For Insured Asthma Patients In Louisiana, An Empirical Study, Mohamed Mohamed Ohaiba

LSU Doctoral Dissertations

Asthma is a chronic condition whose symptoms are managed/prevented using medication and interventions. The overarching objective of this study was to evaluate the impact of patients' demographics on case management enrollment and healthcare utilization, as well as to develop machine learning models to predict high-cost patients.

To accomplish these goals, the Man-Whiteness test, the chi-squares test, logistic regression and odds ratios, and machine learning models were implemented. The average cost of the non-enrolled CM group was significantly higher than the enrolled group (p-value .0001). In addition, the non-enrolled groups had considerably more visits to the emergency department than the other …

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A Sarkar, Hossam Abohamer, Mohammad Oyan

Data

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A. Sarkar, Hossam Abohamer, Mohammad Oyan

Publications

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

Hybrid Modeling For Electrochemical Systems, Luis Alejandro Briceno-Mena

LSU Doctoral Dissertations

The discovery of new materials like catalysts, polymeric films, and biomolecules, is driven by industrial needs such as improving reaction or separation selectivity, enhancing therapeutic effects on medical treatments, or reducing costs of replacement. However, deployment of these advances in industrial applications is often hindered by the lack of models needed for design and optimization. Due to the novelty of materials and devices, experimental data and first principles' knowledge are scarce, making it hard to build models either via data-driven or knowledge based approaches. In this context, a way to efficiently combine domain knowledge with data could provide a pathway …

Atomistic Simulation Studies Of Thin Film Growth And Plastic Deformation In Metals And Metal/Ceramic Nanostructures, Reza Namakian

LSU Doctoral Dissertations

Despite the significant improvements in manufacturing and synthesis processes of metals and ceramics in the past decades, there are still areas in which the procedure is still frequently more of an art or skill rather than a science. Therefore, systematic and combined experimental and computational studies are required to facilitate the development of techniques that offer thorough understanding of the events taking place during manufacturing and synthesis processes. With regard to these issues, it is paramount to address microscale characterizations and atomic scale understanding of the events during fabrication processes. One of the focuses of this study is unraveling fundamental …

Non-Equilibrium Colloidal Phenomena In Magnetic Fields And Photoillumination: From Controlling Living Microbots To Understanding Microplastics, Ahmed Al Harraq

LSU Doctoral Dissertations

Colloids are a ubiquitous class of materials composed of microscopic particles suspended in a continuous phase which are found in everyday products and in nature. Colloids are also useful models for studying the spontaneous arrangement of matter from individual building blocks to mesophases. Standard treatment of colloid science is based on the assumption of equilibrium conditions, as defined in traditional thermodynamics. However, novel assembly mechanisms and motility are unlocked by pushing colloids away from equilibrium using external energy. In addition, many colloids in nature and in industrial applications exchange energy and mass with the surrounding environment thus behaving in a …

First-Principles Molecular Dynamics Study Of Liquid Iron-Rich Alloys Under Conditions Of The Earth’S Core, Dipendra Banjara

LSU Doctoral Dissertations

In this dissertation, we report the results of the first-principles molecular dynamics (FPMD) simulations and data analysis on the thermodynamic, structural, and transport properties of iron-rich metallic liquids considering several light and heavy elements under wide ranges of pressure and temperature that are relevant to the earth’s core. Our simulations of pure liquid iron cover the pressure range from 0 GPa at 2000 K to 380 GPa at 7000 K perhaps representing the most extensive computational study to date. We studied four molten iron-rich alloys corresponding to 2.67 atom% of Ni, Co, Mo, and W at pressures up to 380 …

Anaerobic Toluene Biodegradation Potential At A Superfund Site Where Toluene Biosynthesis Was Observed, George Carson

LSU Master's Theses

At a Superfund site near Baton Rouge, LA, the subsurface injection of molasses has been used to stimulate anerobic reductive dechlorination of halogenated organic compounds (e.g., 1,2-dichloroethane and vinyl chloride) present in the groundwater. Following some molasses injections, temporary accumulation of toluene and p-cresol was observed in the groundwater. Accumulation of these aromatic hydrocarbons, which were not detected in the molasses, has been attributed to anaerobic biotransformation of the amino acids phenylalanine and tyrosine. Experiments reported here were conducted in support of an effort to determine if toluene biodegrading bacteria were present in the area where anaerobic toluene accumulation was …

Data-Driven Nonparametric Joint Chance-Constrained Programming For Power Systems Scheduling, Chutian Wu

LSU Doctoral Dissertations

This dissertation is dedicated to implementing data-driven nonparametric joint chance constraints (JCC) to power system optimization problems. Power generated by renewable sources, such as solar farms, is an uncertain parameter. Several approaches solve optimization under uncertainty, including stochastic programming, robust programming, and chance-constrained programming. Uncertain parameters may not belong to any parametric class of probability functions. Thus, methods that consider such uncertainty as a random variable that fits in a known probability density function (PDF) have limitations. This study focuses on chance-constrained programming under nonparametric or data-driven distributionally robust uncertainty settings.

Studies based on chance-constrained programming usually focus on individual …

Introduction To Control Engineering, Xiangyu Meng

E-Textbooks

This is an introductory level textbook for control engineering.

Computational Study Of C-C Coupling Reactions On Heterogeneous Catalysts, Md Saeedur Rahman

LSU Doctoral Dissertations

The utilization of carbon dioxide (CO₂) in chemical production has attracted global research interest. Reacting CO₂ with methane (CH₄) removes these greenhouse gases from the atmosphere and turns both compounds into building blocks for organic compound synthesis. A commonly explored pathway involves dry reforming of methane (DRM), which reacts CH₄ and CO₂ to form syngas, a mixture of H₂ and CO. Syngas is a widely used feedstock for synthesizing chemicals ranging from methanol to fuels via the Fischer-Tropsch (FT) process. However, DRM has a large positive ΔGº, which requires the …

Application Of Distributed Fiber-Optic Sensing For Pressure Predictions And Multiphase Flow Characterization, Gerald Kelechi Ekechukwu

LSU Doctoral Dissertations

In the oil and gas industry, distributed fiber optics sensing (DFOS) has the potential to revolutionize well and reservoir surveillance applications. Using fiber optic sensors is becoming increasingly common because of its chemically passive and non-magnetic interference properties, the possibility of flexible installations that could be behind the casing, on the tubing, or run on wireline, as well as the potential for densely distributed measurements along the entire length of the fiber. The main objectives of my research are to develop and demonstrate novel signal processing and machine learning computational techniques and workflows on DFOS data for a variety of …

Programming The Properties Of Branched Polymers Through Precision Architectures, Michael R. Dearman

LSU Master's Theses

The glass transition of branched polymers is determined by multiple structural parameters that dictate their inter- and intramolecular interactions, and ultimately, their molecular packing in the amorphous phase. Here we examined the impact of side chain length, backbone length, molecular weight composition, and topology on the glass transition behavior of bottlebrush polymers. Through examining precision bottlebrush polymer libraries (PBP, ĐSC = 1.0), we find the infinite molecular weight Tg is reached at a specific brush length after which the effect of the side-chain length dominates. Being a factor more dominant than the backbone, side-chain length affects the Tg of bottlebrush …

Comparative Analysis Of 3d Printed Bridge Construction In Louisiana, Amirhosein Jafari, Ali Kazemian, Sarah Ataei

Data

A construction 3D printing system could result in automated infrastructure development at reduced cost and time, significantly boosting overall productivity. Although there has been a growing interest in using construction 3D printing for projects such as house construction, implementing this innovative technology for infrastructure development, particularly bridge construction, has not been investigated as extensively. This study aims to compare the environmental impact of precast and 3D concrete printing (3DCP) techniques with a pedestrian bridge case study, located in Louisiana, where the bridge elements were 3D printed off-site and then transported and assembled on the bridge site. A detailed cradle-to-site life …

Comparative Analysis Of 3d Printed Bridge Construction In Louisiana, Amirhosein Jafari, Ali Kazemian, Sarah Ataei

Publications

A construction 3D printing system could result in automated infrastructure development at reduced cost and time, significantly boosting overall productivity. Although there has been a growing interest in using construction 3D printing for projects such as house construction, implementing this innovative technology for infrastructure development, particularly bridge construction, has not been investigated as extensively. This study aims to compare the environmental impact of precast and 3D concrete printing (3DCP) techniques with a pedestrian bridge case study, located in Louisiana, where the bridge elements were 3D printed off-site and then transported and assembled on the bridge site. A detailed cradle-to-site life …

Development Of Ultra-High Performance Engineered Geopolymer Composites (Uhp-Egcs), Hassan Noorvand, Miladin Radovic, Marwa Hassan, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Data

This study investigated the possibility of developing novel UHP-EGC materials for the repair and new construction of transportation infrastructure in Region 6 by utilizing locally available resources. To this end, the geopolymers (GPs) in this study were synthesized by activating metakaolin (MK) with potassium silicate and sodium silicate solutions. The solutions were manufactured in the laboratory by dissolving silica fume and potassium hydroxide (KOH) or sodium hydroxide (NaOH) in deionized water. MK-based GP binders, mortars, and fiber-reinforced composites were manufactured and evaluated to determine their density, compressive strength, tensile properties, and slant shear bond strength to Portland cement concrete (PCC). …

Development Of Ultra-High Performance Engineered Geopolymer Composites (Uhp-Egcs), Hassan Noorvand, Miladin Radovic, Marwa Hassan, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Publications

This study investigated the possibility of developing novel UHP-EGC materials for the repair and new construction of transportation infrastructure in Region 6 by utilizing locally available resources. To this end, the geopolymers (GPs) in this study were synthesized by activating metakaolin (MK) with potassium silicate and sodium silicate solutions. The solutions were manufactured in the laboratory by dissolving silica fume and potassium hydroxide (KOH) or sodium hydroxide (NaOH) in deionized water. MK-based GP binders, mortars, and fiber-reinforced composites were manufactured and evaluated to determine their density, compressive strength, tensile properties, and slant shear bond strength to Portland cement concrete (PCC). …

Evaluating The Viscoelastic Properties Of Alligator Skin Gelatin, Alligel, Compared To Mammalian And Fish Gelatins, Sarah E. Jimenez

Honors Capstones

No abstract provided.

Numerical Investigation Of Heat Generation And Accumulation Contributing To Elevated Temperature In Msw Landfills, Alborz Fathinezhad

LSU Doctoral Dissertations

Landfills are complex geostructures which contains organic and inorganic municipal, and in some cases industrial, wastes and are expected to remain operational for long times. Due to the complex nature of physical, chemical, biological, and thermal reactions that carry on within the depths of a landfill, unexpected incidents such as elevated temperatures could become inevitable. While uncommon to happen, elevated temperatures cause health and environmental issues such as odors, rapid settlements, slope instabilities. In addition, elevated temperatures can negatively impact engineered components in composite bottom liners, cover systems, leachate collection, and gas extraction and recovery systems.

Air intrusion into municipal …

A Machine Learning Approach To Robotic Additive Manufacturing Of Uv-Curable Polymers Using Direct Ink Writing, Luis A. Velazquez

LSU Master's Theses

This thesis presents the design and implementation of a robotic additive manufacturing system that uses ultraviolet (UV)-curable thermoset polymers. Its design considers future applications involving free-standing 3D printing by means of partial UV curing and the fabrication of samples that are reinforced with fillers or fibers to manufacture complex-shape objects.

The proposed setup integrates a custom-built extruder with a UR5e collaborative manipulator. The capabilities of the system were demonstrated using Anycubic resin formulations containing fumed silica (FS) at varying weight fractions from 2.8 to 8 wt%. To fully cure the specimens after fabrication, a UV chamber was used. Then, measurements …

Compilation Optimizations To Enhance Resilience Of Big Data Programs And Quantum Processors, Travis D. Lecompte

LSU Doctoral Dissertations

Modern computers can experience a variety of transient errors due to the surrounding environment, known as soft faults. Although the frequency of these faults is low enough to not be noticeable on personal computers, they become a considerable concern during large-scale distributed computations or systems in more vulnerable environments like satellites. These faults occur as a bit flip of some value in a register, operation, or memory during execution. They surface as either program crashes, hangs, or silent data corruption (SDC), each of which can waste time, money, and resources. Hardware methods, such as shielding or error correcting memory (ECM), …

Enabling The Human Perception Of A Working Camera In Web Conferences Via Its Movement, Anish Shrestha

LSU Master's Theses

In recent years, video conferencing has seen a significant increase in its usage due to the COVID-19 pandemic. When casting user’s video to other participants, the videoconference applications (e.g. Zoom, FaceTime, Skype, etc.) mainly leverage 1) webcam’s LED-light indicator, 2) user’s video feedback in the software and 3) the software’s video on/off icons to remind the user whether the camera is being used. However, these methods all impose the responsibility on the user itself to check the camera status, and there have been numerous cases reported when users expose their privacy inadvertently due to not realizing that their camera is …

Sers Platform For Single Fiber Endoscopic Probes, Debsmita Biswas

LSU Doctoral Dissertations

Molecular detection techniques have huge potential in clinical environments. In addition to many other molecular detection techniques, endoscopic Raman spectroscopy has great ability in terms of minimal invasiveness and real-time spectra acquisition. However, Raman Effect is low in sensitivity, limiting the application. Surface-Enhanced Raman Scattering (SERS), addresses this limitation. SERS brings rough nano-metallic surfaces in contact with specimen molecules which enormously enhances Raman signals. This provides Raman spectroscopy with immense capabilities for diverse fields of applications.

Generally, in clinical probe applications, the spectrometer is brought near the target molecules for detection. Typically, optical fibers are used to couple spectrometers to …

Toward A Safer Transportation System For Senior Road Users, Saba Doulabi

LSU Doctoral Dissertations

Senior pedestrians and drivers (65 years and older) are among the most vulnerable road users. As the population of seniors rise, concerns regarding older adults' traffic safety are growing. The advantages of using autonomous vehicles, innovative vehicle technologies, and active transportation are becoming more widely recognized to improve seniors' mobility and safety. This behooves researchers to further investigate senior road users’ safety challenges and countermeasures. This study contributes to the literature by achieving two main goals. First, to explore contributing factors affecting the safety of older pedestrians and drivers in the current transportation system. Second, to examine seniors’ perceptions, preferences, …

Spam Detection Using Machine Learning And Deep Learning, Olubodunde Agboola

LSU Doctoral Dissertations

Text messages are essential these days; however, spam texts have contributed negatively to the success of this communication mode. The compromised authenticity of such messages has given rise to several security breaches. Using spam messages, malicious links have been sent to either harm the system or obtain information detrimental to the user. Spam SMS messages as well as emails have been used as media for attacks such as masquerading and smishing ( a phishing attack through text messaging), and this has threatened both the user and service providers. Therefore, given the waves of attacks, the need to identify and remove …

A Field-Deployable Quartz Crystal Microbalance System For Gas Detection, Jongyoon Park

LSU Doctoral Dissertations

Quartz crystal microbalance (QCM) has been widely studied as a mass sensing technique in laboratory environments and has shown a wide range of industrial applications such as food quality control, various forms of chemical detection, and biomolecular recognition under gas phase as well as liquid phase media. The construction of multi-sensor arrays combined with special sensor coatings enables multiple analyte detections and discrimination of multi-analyte along with statistical analysis. Despite the great sensing capabilities of QCM and growing interest in practical applications beyond the laboratory setup, most QCM studies are still performed in laboratory settings with benchtop QCM instruments. Therefore, …

Interactive Industrial Energy Assessment Learning Platform Using 360-Degree Virtual Reality Contents, Laleh Ghanbari

LSU Doctoral Dissertations

The traditional passive industrial energy assessment training methods included low direct involvement of students, and they lacked an engaging learning environment. Since the main task for energy assessment is visual inspection and data collection, traditional passive training methods were not able to provide hands-on experience for the students. An active training method was needed to make the current industrial energy assessment training more efficient and effective, a method which provides the opportunity for students to have more interaction with the training environment. In this study, an interactive industrial energy assessment learning platform using 360ᵒ virtual reality contents was developed. The …

Comparison Of Two Capital Cost Assessment Methods For A Styrene Process Design, Marian K. Luzier

Honors Capstones

No abstract provided.

Rebar-Free 3d Printing Of Transportation Infrastructure, Ali Kazemian, Marwa Hassan, Hassan Noorvand, Gabriel Arce, Hassan Ahmed, Ilerioluwa Giwa

Data

This study investigates the fresh and hardened-state properties of printing mixtures including different dosages of steel fibers, especially at higher dosages which have not been investigated before. This study also considers the effects of other parameters such as sand-to-powder ratio and the limestone content on the properties of steel fiber reinforced printing materials, to reduce the Portland cement content which has a high carbon footprint. The obtained experimental results revealed that high-performance materials incorporating up to 2.5% steel fibers (by volume) can be successfully 3D printed. The mechanical properties of the reinforced mixtures improved significantly at high fiber dosages (2% …