Engineering Commons^™

Effects Of Emergency Vehicle Warning Lighting System Characteristics On Driver Perception And Behavior, Emily Hiebner

Doctoral Dissertations and Master's Theses

Secondary crashes, including struck-by incidents are a leading cause of line-of-duty deaths among emergency responders, such as firefighters, law enforcement officers, and emergency medical service providers. The introduction of light emitting diode (LED) sources and advanced lighting control systems, provides a wide range of options for emergency lighting configurations. This study investigated the impact of lighting color, intensity, modulation, and flash rate on driver behavior while traversing a traffic incident scene at night. The impact of retroreflective chevron markings in combination with lighting configurations, as well as the measurement of “moth-to-flame” effects of emergency lighting on drivers was also investigated. …

Experimental And Numerical Investigation Of Lauric Acid Melting At Suboptimal Inclines, Casey J. Troxler

Doctoral Dissertations and Master's Theses

Validation experiments are the baseline for completing numerical studies for engineering design. Applications of the enthalpy-porosity model have expanded in research with the growth of new technologies such as metal additive manufacturing or the renewed interest in thermal energy storage for supplementing renewable energy. A simplified experiment examining the melting behavior of lauric acid from an isothermal surface has become a common case for validating the performance of numerical models. Several studies of this rectangular experiment have been repeatedly used as model validation in a variety of problem conditions.

The first part of this study presents experimental data for the …

Evaluating The Effects Of Shored Construction On Steel Girder Composite Bridges, Parker Brooks

Doctoral Dissertations and Master's Theses

Steel composite girder bridges provide economic advantages and higher load-carrying capacity than non-composite alternatives. Over the years, a conventional sequence of un-shored construction for steel girder composite bridges has been developed. There is an alternative construction sequence, known as shored construction, that uses temporary supports (discretely or fully supported) for the superstructure during the installation of metal forms and the pouring of concrete. Shored construction also can be used in an Accelerated Bridge Construction (ABC) practice where construction occurs at a nearby site and fully-formed elements are transported to the final site using self-propelled modular transporters (SPMTs). In order to …

Time-Resolved Piv Measurements Of Ship Airwakes With Quartering Winds, Kaijus H. Palm

Doctoral Dissertations and Master's Theses

The unsteady, three-dimensional, turbulent airwake over the Simple Frigate Ship No. 2 (SFS2) with quartering wind flow directions was studied in a low-speed wind tunnel facility. Surface oil flow visualization and time-resolved stereoscopic and planar particle image velocimetry (PIV) measurements were made for three crosswise planes and a single centerline streamwise plane. Measurements included various configurations with the bow of the ship model at two different quartering wind conditions of 10 and 20 degrees, as well as cases with and without the effects of a simulated atmospheric boundary layer (ABL). A comparative analysis of the time-averaged flow structures between the …

Influence Of Wing Planform Shape On The Effectiveness Of A Fixed-Slot, Yuan Zhao

Doctoral Dissertations and Master's Theses

This thesis report explores the effect of the Clark-Y wing geometry on lift and drag to use as a reference during aircraft design stage. The different characteristics investigated are fixed slot span, taper ratio, washout, and sweep angle. Plain wings, half slotted wings, and fully slotted wings were built in CATIA with an aspect ratio of 6 and different taper ratio, washout, and sweep angles. Using the CATIA models to generate the 3-D grids in Pointwise. All the simulations were tested in Ansys-Fluent under sea-level conditions with a Reynold number of 609000. The relationships between the aerodynamic characteristics and the …

A Meshless Approach To Computational Pharmacokinetics, Anthony Matthew Khoury

Doctoral Dissertations and Master's Theses

The meshless method is an incredibly powerful technique for solving a variety of problems with unparalleled accuracy and efficiency. The pharmacokinetic problem of transdermal drug delivery (TDDD) is one such topic and is of significant complexity. The locally collocated meshless method (LCMM) is developed in solution to this topic. First, the meshless method is formulated to model this transport phenomenon and is then validated against an analytical solution of a pharmacokinetic problem set, to demonstrate this accuracy and efficiency. The analytical solution provides a locus by which convergence behavior are evaluated, demonstrating the super convergence of the locally collocated meshless …

Stochastic Model Predictive Control Via Fixed Structure Policies, Elias Wilson

Doctoral Dissertations and Master's Theses

In this work, the model predictive control problem is extended to include not only open-loop control sequences but also state-feedback control laws by directly optimizing parameters of a control policy. Additionally, continuous cost functions are developed to allow training of the control policy in making discrete decisions, which is typically done with model-free learning algorithms. This general control policy encompasses a wide class of functions and allows the optimization to occur both online and offline while adding robustness to unmodelled dynamics and outside disturbances. General formulations regarding nonlinear discrete-time dynamics and abstract cost functions are formed for both deterministic and …

The Effect Of Pre-Thermal And -Load Conditions On In-718 High Temperature Fatigue Life, Paulina De La Torre, Alberto Mello

Publications

Ni-based superalloys are largely used in the aerospace industry as critical components for turbine engines due to their excellent mechanical properties and fatigue resistance at high temperatures. A hypothesis to explain this atypical characteristic among metals is the presence of a cross-slip mechanism. Previous work on the role of thermal activation on cubic slip has shown strain accommodation in two sets of slip planes, which resembled the activation of {100} cubic slip systems along of the octahedral slip planes {111} in Ni-based superalloys under high strain and temperature, exhibiting a more homogeneous strain distribution and less strain localization. Following those …

A Combined Approach For Private Indexing Mechanism, Pranita Maruti Desai Ms., Vijay Maruti Shelake Mr.

Journal of Digital Forensics, Security and Law

Private indexing is a set of approaches for analyzing research data that are similar or resemble similar ones. This is used in the database to keep track of the keys and their values. The main subject of this research is private indexing in record linkage to secure the data. Because unique personal identification numbers or social security numbers are not accessible in most countries or databases, data linkage is limited to attributes such as date of birth and names to distinguish between the number of records and the real-life entities they represent. For security reasons, the encryption of these identifiers …

Using Machine Learning In Estimating Changing Bed Shear Over A Flume Test Box, Ghada S. Ellithy, Siddharth S. Parida

Publications

A dam or levee breach caused by overflow erosion is difficult to evaluate during an overtopping event due to difficulty in accessibility and quickly changing conditions. However, for assessment of risk associated with breach time and ensuing downstream consequences, the erosion rate of embankment soils during this process needs to be evaluated. Soil erosion and water depth measurements were taken during flume tests using a Shallow Water Lidar (SWL) system scans. The tests were conducted in a 1-m-wide tilting flume on three cleans and gravel soil mixes with a median grain size D50of 2, 5,and 20 mm. The box measured …

Influence Of Cold Expansion And Aggressive Environment On Crack Growth In Aa2024-T3, Ken Shishino, Christopher Leirer, Alberto Mello

Publications

This research aims to establish the effect of hole cold expansion on fatigue life of pre-cracked material under aggressive environment. A relationship between crack propagation and secondary crack initiation was established for AA2024-T3 cold worked holes subjected to cyclic loads to determine the impact on fatigue life of joints in presence of saline solution. Galvanic corrosion of a steel fastener/aluminum plate assembly was investigated assuming the presence of cracks in the aluminum plates, whose growth will be monitored in-situ with a digital microscope throughout the fatigue process. The cold expansion treatment improved the fatigue life fourfold under a corrosive environment, …

Humanity’S Journey To The Red Planet, Robinson Raphael

Student Works

Being the fourth planet in our solar system, Mars is half the size of Earth and constitutes a gravity near 0.38 g. Like its fellow terrestrial planets, it has a central core, rocky mantle, and solid crust. Coupled with a thin atmosphere, its surface features are reminiscent of both the Earth and Moon. Given adequate accessibility, Mars has been a hub for scientific exploration. With past and present robotic missions, they have gradually provided information about the Martian environment to help aid future human exploration. For humanity’s first manned mission to the Martian crater, Aram Chaos, a crew of six …

Intention To Complain About Unmanned Aircraft System Noise: A Structural Equation Analysis, Robert Brents

Doctoral Dissertations and Master's Theses

Aircraft noise has a long and documented history as a source of public annoyance and a driver of noise complaints. The impending large-scale use of unmanned aircraft systems (UAS)s could expose a broader cross-section of the public to a new type of aircraft noise. Recent research notes some reactions to UAS noise, but no rigorous analyses of public intention to complain about UAS noise have been found.

Due to the potential proliferation of UASs and their attendant noise, understanding public reaction could advise both government and industry. Governments at all levels could apply the results to inform policies related to …

The Breathing Human Infrastructure: Integrating Air Quality, Traffic, And Social Media Indicators, Heather O'Leary, Scott Parr, Marwa El-Sayed

Publications

Outdoor air pollution is a complex system that is responsible for the deaths of millions of people annually, yet the integration of interdisciplinary data necessary to assess air quality's multiple metrics is still lacking. This case study integrates atmospheric indicators (concentrations of criteria pollutants including particulate matter and gaseous pollutants), traffic indicators (permanent traffic monitoring station data), and social indicators (community responses in Twitter archives) representing the interplay of the three critical pillars of the United Nations' Triple Bottom Line: environment, economy, and society. During the watershed moment of the COVID-19 pandemic lockdowns in Florida, urban centers demonstrated the gaps …

Data Types Structure And Data Preparation Process, Leila Halawi, Amal Clarke, Kelly George

Publications

Learning Objectives

• Identify the different data types and measurements

• Identify the need for data and data sources

• Explain data partitioning and honest assessment

• Identify the necessity of data preparation and curation

• Identify the data preparation process

• Explore SAS VIYA platform and import data

Resilience Attributes Of Certificated Flight Instructors, David Cross, Kristine Kiernan

Publications

The aviation industry has extensive vocabulary, data sources, and theoretical models to investigate human errors. However, the industry does not have commensurate ways to think about and analyze human success. Learning from successful routine operations is challenging because the corresponding common language and data streams are less robust. This paper explores the use of the critical incident debrief method to collect data on routine resilient performance among Certificated Flight Instructors (CFI). CFI thoughts and behaviors were coded in accordance with resilience theory. The critical incident debrief method is a valuable source of data for exploring resilient performance as it provides …

Assessing Unstabilized Approaches: A Phenomenology Study Of The Risk Perceptions And Decision-Making Thought Process Of General Aviation Pilots., Shlok Misra, Jorge L. D. Albelo Ph.D., Victor Fraticelli Rivera

Publications

The Federal Aviation Administration emphasized the need to focus on and develop human factors training as early as 1993 in official Human Factors Policy Order 9550.8. The purpose of this study was to conduct a detailed qualitative phenomenological analysis of the risk perceptions and decision-making model of collegiate aviation pilots for unstabilized approaches. The study focused on understanding how collegiate aviation pilots perceive unstable approaches, the risk associated with unstable approaches, and the factors that trigger pilots to execute a go-around. The International Air Transportation Association warns that continuing an unstabilized approach can lead to runway excursions, hard landings causing …

A Qualitative Single-Case Exploring The Impact Of A Mentor And Cohort On Students’ Academic And Career Decisions., Kevin Adkins, Samantha Bowyer, Jorge L. D. Albelo Ph.D.

Publications

Exposure to research is known to play a positive role in undergraduate education. However, robust research responsibilities are oftentimes not formally incorporated into a student’s academic experience until master level studies. Further, a variety of intimidation factors often inhibit many undergraduate students from participating on a research team. In this case study, the research team evaluated a unique group of undergraduate researchers who matriculated to the same university after beginning to participate in research as concurrently enrolled students. Following matriculation, each student continued to participate in research throughout the entirety of their undergraduate studies. All of the study’s students were …

Timestamp Estimation From Outdoor Scenes, Tawfiq Salem, Jisoo Hwang, Rafael Padilha

Annual ADFSL Conference on Digital Forensics, Security and Law

The increasing availability of smartphones allowed people to easily capture and share images on the internet. These images are often associated with metadata, including the image capture time (timestamp) and the location where the image was captured (geolocation). The metadata associated with images provides valuable information to better understand scenes and events presented in these images. The timestamp can be manipulated intentionally to provide false information to convey a twisted version of reality. Images with manipulated timestamps are often used as a cover-up for wrongdoing or broadcasting false claims and competing views on the internet. Estimating the time of capture …

How To Construct A Safety Management System (Sms) That Promotes Safety Culture In Your Organization, Tara Samuels

International Journal of Aviation, Aeronautics, and Aerospace

Organizations spend considerable resources building robust Safety Management Systems, yet may struggle to develop a strong Safety Culture. The effect can ripple throughout the organization, particularly affecting employee safety, as well as product quality, productivity, engagement, and retention. This paper introduces the four basic components and most critical cultural preconditions of a successful SMS. It then provides recommendations aligned with each of the four basic components to guide management toward creating the kind of work environment that empowers and engages employees at all levels of the organization. Building a strong Safety Culture is simply good business, and the research conducted …

Applying Lessons From Safety-Ii Proof Of Concept In Line Operational Safety Audit To Aviation Maintenance, David R. Zubowski

Journal of Aviation/Aerospace Education & Research

Maintenance safety culture is a topic that continues to arise. There is much information in many different literature sources that discusses measuring, analyzing, and scrutinizing data to determine if a safety culture exists in an organization and how to improve it. Currently, aviation maintenance personnel are surveyed for their opinions on how safe their culture is. However, this may not be an adequate reflection of the safety culture or help maintenance personnel conduct their jobs. Typically, they are operating in an environment that has a central determination of what safety culture is. Other programs in other fields have attempted a …

Drone Cage Design And Implementation To Enable Small Drone Architecture Testing, Marco Fagetti, Emily M. Suh

Undergraduate Student Works

Geometric mechanics is a dynamical formalism that allows for simultaneous treatment of rotational and translational motion without the drawbacks of attitude parameterization sets. While geometric mechanics is well suited to deal with full six degree-of-freedom motion or significant position-attitude coupling, this formalism has yet to be extensively applied to hardware systems. The broader research goals of this work aim to prove the practical viability of this theoretical framework by applying it to a class of Crazyflie drones, which are frequently used to assess Guidance, Navigation, and Control schemes. To efficiently achieve these goals, a reliable, collapsible drone cage is required …

Anatomy Of An Internet Hijack And Interception Attack: A Global And Educational Perspective, Ben A. Scott, Michael N. Johnstone, Patryk Szewczyk

Annual ADFSL Conference on Digital Forensics, Security and Law

The Internet’s underlying vulnerable protocol infrastructure is a rich target for cyber crime, cyber espionage and cyber warfare operations. The stability and security of the Internet infrastructure are important to the function of global matters of state, critical infrastructure, global e-commerce and election systems. There are global approaches to tackle Internet security challenges that include governance, law, educational and technical perspectives. This paper reviews a number of approaches to these challenges, the increasingly surgical attacks that target the underlying vulnerable protocol infrastructure of the Internet, and the extant cyber security education curricula; we find the majority of predominant cyber security …

Evaluation Of Onboard Detect-And-Avoid System For Suas Bvlos Operations, Jon M. Loffi, Samuel M. Vance, Jamey Jacob, Luke Spaulding, Jared C. Dunlap

International Journal of Aviation, Aeronautics, and Aerospace

No abstract provided.

Remotely Piloted Aircraft C2 Latency During Air-To- Air Combat, David L. Thirtyacre

Publications

Remotely piloted aircraft command-and-control latency could play a significant role during beyond-line-of-sight engagements in future conflicts. As the Air Force prepares to use these systems and artificial intelligence in within-visual-range combat, it must understand the effects of latency, or missing sensor data, during a dogfight. Research indicates technology-based latency influences the engagement outcome geometry similar to a slow decision-making cycle foundational to the understanding of Boyd’s Observe, Orient, Decide, Act (OODA) Loop. This study adds depth to the theory illustrating technology-induced latency has a similar effect as slow human decision making resulting in lower performance. Therefore, when combined with the …

Heat Generation Of Aircraft Tires At Landing, Yu Li, Dr. Weiji Wang

International Journal of Aviation, Aeronautics, and Aerospace

When the aircraft lands on a runway, the great speed difference between tires and runway causes non-negligible friction and speeds up wheels. The generated heat rapidly raises tire temperature and causes material decomposition, which leads to replacement cost and flight safety issues; the chemical substances in the air can also cause emission problems. Many studies on aircraft tire temperature are based on software simulation or experiments. The simulation result may be affected by unnecessary variables due to cumbersome modelling, and the observation result may be inaccurate due to a particularly dynamic friction process. On the other side, there are few …

Classifıcation Of Survivor/Non-Survivor Passengers In Fatal Aviation Accidents: A Machine Learning Approach, Tüzün Tolga İnan Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The safety concept primarily examines the most fatal (resulting in dead passengers) accidents of aviation history in this study. The primary causes of most fatal accidents are; human, technical, and sabotage/terrorism factors. Although the aviation industry started with the first engine flight in 1903, the safety concept has been examined since the 1950s. The safety concept firstly examined the technical factors, and in the late 1970s, human factors started to analyze. Despite these primary causes, there have different factors that affect accidents. So, the study aims to determine the affecting factors of the most fatal accidents to classify the survivor/non-survivor …

Uas For Public Safety: Active Threat Recognition, Joseph Cerreta, Tray Denney, Scott S. Burgess, Anthony Galante, David Thirtyacre, Gloria A. Wilson, Patrick Sherman

International Journal of Aviation, Aeronautics, and Aerospace

The Center for Homeland Defense and Security identified an increase of active threat events, such as mass shootings, annually since 1999. Literature suggests that 90% of shootings were over before law enforcement arrived at the scene and the first responder response was limited to “surround and contain” until Special Weapons and Tactics Teams (SWAT) arrived on the scene. Using Unmanned Aircraft Systems (UAS) to detect which individual was the threat and type of weapon used can provide useful information to increase the speed of the response for first-on-scene rather than waiting for SWAT if the type of weapon was known. …

Modelling Air Quality In An Aircraft Passenger Cabin Using Health Care Standards, Bert Silich

International Journal of Aviation, Aeronautics, and Aerospace

The interest in aerosol contamination of aircraft passenger cabins has increased since the onset of the COVID-19 pandemic. Mathematical models have been developed to help describe how an aerosol behaves in a closed space. The number of infectious particles inhaled is of scientific interest because it can be related to the risk of getting ill from a pathogen. The data required to calculate these results is often difficult to obtain in real world settings. In fact, particle inhalation details are not obtained in the day-to-day routine of a health care environment and are they not required to maintain safety. Hospital …

Anthropometry Considerations In The Design And Evaluation Of Flight Deck Displays And Controls: Literature Review, Robert Joslin

International Journal of Aviation, Aeronautics, and Aerospace

The regulatory requirements and guidance for showing compliance with the Federal Aviation Administration anthropometric considerations in aircraft design are widely dispersed in an array of source documents. Consequently, they are difficult for aircraft manufacturers/applicants to identify, interpret, and address thereby extending the time to certify new/modified aircraft and aircraft systems. This literature review is intended to provide a compendium of the anthropometry considerations in the design certification of displays and controls in aircraft flight decks. This document is not a compliance document and the references herein are frequently updated, hence should be verified by the reader.