Engineering Commons^™

A Summative Evaluation Of Flightsafety International's Computer Assisted Instruction Known As "Principles Of Troubleshooting", Willie Don Middlebrooks

Master's Theses - Daytona Beach

The objective of this experimental research was to ascertain if cognitive skills developed by the "Principles of Troubleshooting" (POT) educational course improved aircraft fault diagnostic ability in aircraft maintenance trainees. Sixty randomly chosen Embry-Riddle Aeronautical University (ERAU) students served as control and experimental subjects with the POT course as the independent variable. Because random assignment was possible, a posttest-only control group design was used. Thirty ERAU maintenance trainees who had received basic and advanced ERAU fault diagnostic training were administered the POT course. A practical test administered to both groups using two tailed t tests for independent means indicated improvement …

Improving Operational Readiness Of Airport Emergency Response Crews: Utilization Of Gaming Theory In Decision Making Simulations, William E. Vines Jr.

Master's Theses - Daytona Beach

The purpose of this study was to evaluate the potential effects of simulation gaming technique on the decision-making skills of airport emergency response technicians. Through the use of descriptive research methods this study has examined the benefits of using simulation training to enhance operational readiness. A specialized questionnaire was developed using a Likert scale format to attain the opinion of 20 airport directors--or their representatives. Findings did support the research hypothesis that the introduction of simulation training (Table Top) exercises would increase the operational readiness of airport emergency response crews. Statistical analysis of survey responses found that no significant difference …

An Experimental Study Of Transient Flows In Pulse Combustors, Michael P. Femandes

Master's Theses - Daytona Beach

The purpose of this investigation was to experimentally characterize a pulse combustor with respect to ambient conditions, pressure amplitudes, wall temperature, combustor geometry and type of centerbody used. The wall temperatures were recorded and the pressure variation was obtained using a sampling rate of 10,000 readings per second. These parameters were recorded for two different tailpipe lengths and centerbodies, and for different ambient conditions. Power spectrums were then obtained from the pressure variations. These spectrums displayed the peak amplitudes and the frequencies at which they occurred. The experiment showed distinct repeatability. It was concluded that combustor displayed the steady, pulsing …

Low Level Alcohol And Its Residual Effect On A Pilot's Threshold For Detecting Angular Motion, Regina G. Bolinger

Master's Theses - Daytona Beach

The purpose of this study was to examine a pilot's sensitivity to a change in angular motion after alcohol ingestion and determine the duration of effect after the time the blood alcohol content (BAC) reached zero. An earlier study determined that a pilot's threshold for detecting angular motion was affected by 30% with low doses of alcohol ingestion. An important question remaining is whether the pilot's sensitivity to angular motion will continue to be significantly affected after the time BAC reaches zero. Twelve instrument-rated pilots flew a partial panel rotating simulator under an in-flight scenario, and thresholds were measured before …

Classification Of Acoustic Emission Signals From An Aluminum Pressure Vessel Using A Self-Organizing Map, Weldon Paul Thornton

Master's Theses - Daytona Beach

Acoustic emission nondestructive testing has been used for real-time monitoring of complex structures. All of the structures were made of materials at least 0.070 inch thick. The purpose of this research was to demonstrate the feasibility of using neural networks to classify acoustic emission signals gathered from a pressure vessel made of 2024-T3 aluminum 0.040 inches thick, i.e. thin aluminum sheet. AE waveforms were recorded during fatigue cycling of one pressure vessel using a wide band transducer and a digital oscilloscope connected to a computer. The source for each signal was determined using two narrow band transducers and a LOCAN-AT …

Standardized Checklists Versus Variable Checklist: An Evaluation In A Light Twin Simulator, Veronica Terese Cote

Master's Theses - Daytona Beach

The purpose of this study was to determine if a checklist that varied by sequence would enable the pilot to detect potential errors more easily than those who used an unchanging checklist. A flight hour based stratified sample of pilots were randomly divided into two groups and flew a series of eight flights in a light twin aircraft simulator. The control group used the same checklist for each trial; the experimental group used a checklist that covered the same items but varied in sequence for each trial. Faults were introduced in the last two trials. The number of faults discovered …

Numerical Investigation Of Second-Order Effects In A Supersonic Boundary-Layer, Timothy R. Membrino

Master's Theses - Daytona Beach

Historically, the study of boundary-layer flows has centered on the analysis of the first-order boundary-layer equations and their application to physical flow problems. However, selected “real-world” boundary-layer flows exhibit significant second-order effects which are neglected by the first-order equations. Full Navier-Stokes solutions are often not merited or desired for these flows. Therefore, the second-order boundary-layer equations provide a compromise.

Few validating comparisons have been attempted between second-order boundary-layer theory and experimental or numerical solutions of compressible viscous flows. Experimental simulations to capture second-order effects are difficult since the desired effects are small and can exist simultaneously, resulting in a neutralizing …

The Development Of A Computerized Airline Strategy Simulation: A Decision Support System To Assist Airline Management Training, Chulkyu Lee

Master's Theses - Daytona Beach

This thesis involves the development of a computerized airline strategy simulation, decision support system to assist airline management training. The simulation program is designed to be run under the Microsoft Windows™ environment on any IBM - compatible computer. The primary objective of this thesis is to develop a useful program to be helpful in practicing decision making skills in a group setting, understanding the significance of strategic management, forecasting demand in today's turbulent airline industry, learning stockholders' roles in a business, and practicing skills required in airline operations management.

Flight-Deck Automation: The Attitudes And Perceptions Of Selected Boeing 757/767 Air Carrier Pilots, William Woodrow Clark

Master's Theses - Daytona Beach

Development in electronic displays and computers have enabled avionics designers to present the pilot with ever increasing amounts of information in greater detail and with more accuracy- However, technological developments have not always brought about enhancement of the pilot's role. Investigating the interaction of cockpit crew members and the vast array of automated systems they control and monitor will contribute to the determination the effect this interface has on the performance of the cockpit team. This study utilized a questionnaire to determine if the opinions of the flight crew suggested performance is impacted negatively by automation. There was no significant …

Nonlinear Analysis Of Composite Beams Under Random Excitations, Snorri Gudmundsson

Master's Theses - Daytona Beach

The vibration responses of three unsymmetrically laminated beams, that are excited with a Gaussian random forcing function, are studied in this thesis. The beams are analyzed nonlinearly and compared to linear results, indicating some important corrections. The solution procedure begins with the derivation of the general equation of motion using Galerkin's method. Then, two approaches are taken in the solution. First, the equation of motion is attacked directly employing a real time Runge-Kutta numerical analysis. Second, the method of equivalent linearization is used. The thesis finds the results from the two approaches to be in a close agreement, although some …

The Effects Of The Proposed Larger Aircraft On Airport Capacity In The United States, Kerwin S. Mckenzie

Master's Theses - Daytona Beach

The problem of c is one that has been around for some time. With air travel projected to increase into the year 2000, Airbus Industrie, Boeing Corporation and McDonnell Douglas are making plans or are in the process of building large transports. Airbus has built the A340/A330 and is planning the now named A3XX, a 600 plus seater. Boeing is currently flying the 747-400 which holds up to 570 passengers. In addition, Boeing rolled out the 777 in June 1994, which holds up to 550 passengers. Douglas is planning the MD-12 with a 700 plus passenger load. The purpose of …

Airport Security Checkpoint Screener: An Analytical Study Of Job Retention And Attrition Factors, Norman Mark St. Laurent

Master's Theses - Daytona Beach

The proposed research seeks to identify the factors contributing to job retention and job attrition in terms of why an airport security checkpoint screener would try or want to stay on the job or leave the job. By identifying the causes of employee satisfaction and dissatisfaction, and by understanding the integral components of employee turnover can develop appropriate interventions that curb existing retention problems (exceeding 70% annually in most facilities). Aside from the obvious costs affiliated with recruiting, selecting, and training replacement employees, there is likely to be a detrimental impact on the effectiveness of airline passenger screening when a …

Airbus A320/321 Quick Change Market Analysis - A Case Study, Till Christian Mommsen

Master's Theses - Daytona Beach

The purpose of this thesis is to evaluate and compare the Boeing B737 QC to the Airbus A320/321 QC aircraft, and to determine their relative market within a sample airline. The technical design of the two Airbus aircraft in a mixed QC operation were considered with respect to the requirements of a particular airline. Direct operating costs and payload range data for all three aircraft were calculated.

To evaluate the competitiveness of the A320/321 QC under actual conditions, a linear programming fleet planning model was developed that considers more than the direct operating costs of a particular aircraft. The cost …

The Professional Air Traffic Controllers Strike: A Retrospective Analysis, Steven E. Durnin

Master's Theses - Daytona Beach

The purpose of this study was to assess the opinions, beliefs, and perspectives of former air traffic controllers who were terminated from employment with the Federal Aviation Administration for participating in the Professional Air Traffic Controllers Organization (PATCO) strike of 1981. The study examines the perceptions of the former controllers to determine their feelings toward the justification for going on strike over 13 years ago. This is relevant in light of recent events including the lifting of the ban against rehiring PATCO controllers by the Clinton Administration.

The data collected for this study were obtained with an opinionnaire mailed via …

An Econometric Analysis Of The Canada - Florida Air Passenger Market, Craig W. Poteet

Master's Theses - Daytona Beach

This thesis evaluates the Canada - Florida commercial air passenger market and explains fluctuations in the demand for air passenger service based on an econometric modeling process. Canada - Florida commercial air passenger traffic is segmented into those passengers flying on scheduled air services and those travelling on chartered air services. Two separate multiple regression equations are constructed to address the two segments of the Canada - Florida market. Both equations are formulated utilizing the same three independent variables. It was expected that the three chosen independent variables, Canadian GDP, a ratio of chartered air fare levels by scheduled air …

A Simulation Study Of Pilots' Ability To Perceive Angular Motion Under The Influence Of Alcohol, Wali N. Mughni

Master's Theses - Daytona Beach

The study consisted of experimental research to determine the effect of alcohol on the pilots’ ability to perceive angular motion. It was hypothesized that in the absence of visual cues, pilots’ thresholds of perceiving a change in angular motion is adversely affected by alcohol in the blood, thereby increasing the potential to enter a state of spatial disorientation. The experiments were designed to simulate a real time in-flight scenario, in a rotating flight simulator, where angular accelerations could be controlled and pilots’ thresholds of perceiving a change in angular motion could be measured. The study revealed that the subjects registered …

Numerical Analysis Of The Viscous Flow In A Supersonic Diffuser, Sa'ed A'Rafat

Master's Theses - Daytona Beach

The goal of a diffuser is to transform kinetic energy into potential energy with minimum losses in total pressure. Existing supersonic diffusers are based on compression through shock waves. This process is inherently inefficient because of the large losses caused by the shocks. We investigate by means of Computational Fluid Dynamics (CFD) the viscous flow in a supersonic diffuser designed by means of inviscid theory to produce a shock-free isentropic compression. The design is based on the combination of elementary flows. Two simple wave regions connected by a sink flow are used to take a uniform supersonic flow at one …

Running With The Pack: Jit & Automation For Small Manufacturers, Thomas E. Phillips, John R. Ledgerwood

Publications

While both just in time (JIT) concepts and automation programs have been widely implemented and highly successful in large manufacturing companies, many smaller manufacturing companies have wondered whether it would be economically feasible to utilize these same techniques and derive these same benefits. When JIT is adopted by small manufacturers, it provides them with advantages over traditional manufacturing systems, such as lower cost, quality improvements, higher productivity, and less working capital tied up in inventory. Small US manufacturers must understand the basic principles and philosophy of JIT and update their production equipment if they are to be competitive in today's …

Nonlinear Finite Element Analysis Of Laminated Composite Beams Subjected To Harmonic Excitations Using A 20 Dof Beam Element, Mansour Nosrati Kenareh

Master's Theses - Daytona Beach

The purpose of this thesis is to study the nonlinear analysis of antisymmetrically laminated composite beams including shear deformation subjected to harmonic excitation, using a 20-degree of freedom finite element beam. The beam has 10 degrees of freedom at each node: The axial displacements, the transverse deflection due to bending and transverse shear, the twisting angle, the in-plane shear rotation, and their derivatives along the axial direction. In this study, the effect of different parameters such as damping, shear deformation and different edge conditions on the steady-state frequency-responce will be investigated. The analysis was based on the use of finite …

Nonlinear Forced Vibration Of An Unsymmetrically Laminated Composite Beam, Marie Helene Pompei

Master's Theses - Daytona Beach

The purpose of this thesis is to study the nonlinear forced vibration of an unsymmetrically laminated composite beam. Two cases are considered: unsymmetrical angle-ply and unsymmetrical cross-ply composite beams. The nonlinear governing partial differential equations of motion are obtained by taking into account the von-Karman geometrical nonlinearity. These equations are transformed into nonlinear ODE (Ordinary Differential Equations) by means of the Galerkin method. For both cases the forced Duffing equation was obtained. It is to be noted that only for the unsymmetrical cross-ply laminate simply-supported case are both quadratic and cubic nonlinearities present. The resulting equations for both cases are …

Neural Network Detection Of Fatigue Crack Growth In Riveted Joints Using Acoustic Emission, Adriano F. De Almeida

Master's Theses - Daytona Beach

The purpose of this research was to demonstrate the capability of neural networks to discriminate between individual acoustic emission (AE) signals originating from crack growth and rivet rubbing (fretting) in aluminum lap joints. AE waveforms were recorded during tensile fatigue cycling of six notched and riveted 7075-T6 specimens using a broadband piezoelectric transducer and a computer interfaced oscilloscope. The source of 1,311 signals was identified based on triggering logic, amplitude relationships, and time of arrival data collected from the broad-band transducer and three additional 300 Hz resonant transducers bonded to the specimens. The power spectrum of each waveform was calculated …

Mandatory Certification Of Aviation Line Service Technicians: A Question Of Formal Or Informal Training, Jeffrey S. Lewis

Master's Theses - Daytona Beach

Accidents and incidents are created by improperly trained aviation line service technicians. To reduce accidents and incidents associated with improperly trained line service personnel, a mandatory certification plan should be developed. This study utilized the procedures established for the descriptive research method. The researcher gathered data with a self constructed questionnaire, from 72 separate sources of the 120 solicited. All relevant data was analyzed to decide if the research hypothesis could be accepted. The researcher anticipated that statistical evidence would support the research hypothesis, that structured formal training procedures would reveal a significant reduction in the number of accidents and …

Satellite Data Communications Link Requirements For A Proposed Flight Simulation System, Gerald M. Kowalski

Master's Theses - Daytona Beach

The purpose of this study was to investigate the requirements necessary for data and voice communication via satellite, linking Embry-Riddle Aeronautical University (ERAU) and other flight training facilities. The proposed research was conducted following a descriptive method of collecting information, generating and analyzing data, and listing the results for the proposed link requirements. The current fiber-optic communications link at ERAU in Daytona Beach was presented to establish a general foundation of communications. Research was done into methods used by satellite common carriers for realistic data and calculations. A proposed data link to connect flight simulators at the ERAU Prescott campus …

The Effects Of Male-Based Anthropometric Cockpit Designs On Self-Reported Female Aircrew Accommodation, Edith Marie-Anntoinette Dylewska

Master's Theses - Daytona Beach

The purpose of this study was to examine the effects of male-based anthropometric cockpit designs on self-reported female aircrew accommodation. A descriptive survey research method was used to collect the required data. The instrument utilized was a self-developed questionnaire/opinionnaire. It contained both Likert-type and open-ended questions. The 153 subjects were selected from the population of active, civil, female pilots in the United States of America, who hold a Federal Aviation Administration (FAA) Airline Transport Pilot (ATP) Certificate. The responses provided to the Likert questions were analyzed using a goodness-of-fit statistical method. The data collected did not support the research hypothesis …

Upon Closer Inspection...U.S. Naval Aviation Mishaps 1977-1992, Scott A. Shappell, Douglas A. Wiegmann

Publications

The U.S. Navy/Marine Corps Class A flight/flight-related mishap rate has declined markedly since 1953. However, analysis of all Class A, B, and C naval aviation mishaps between January 1977 and December 1992 reveals that mishaps attributable to human factors have declined at a slower rate than those attributable to mechanical/environmental factors. Upon closer inspection of the data, marked differences were evident between single-piloted and dual-piloted aircraft. Global trends were primarily a function of single-piloted aircraft, particularly when phase of flight and time of day that a mishap occurred are considered. Previously reported improvement in aviation safety may be biased by …

Comparison Of Air Traffic Control Candidate Ability With Simulator-Based Training Measures, Lawrence A. Tomaskovic

Master's Theses - Daytona Beach

The purpose of this study was to determine if the utilization of an experimental computer-based selection test battery would aid in the prediction of a candidate's performance when using an air traffic control computer-based simulation program. Each candidate completed the selection test battery, and then received air traffic control instruction using the air traffic control simulation program incorporated in the TRACON/Pro™ simulator system. The selection test battery results were correlated with the subsequent simulator scoring results.

The Effect Of Active And Passive Control On Air Traffic Controller Dynamic Memory, Esa M. Rantanen

Master's Theses - Daytona Beach

The purpose of this study was to investigate the effect of automated and passive control on air traffic controller dynamic memory. The study consisted of two experiments, each involving a realistic ATC scenario for radar approach control with a mix of arriving and departing traffic. In Experiment I, the subjects performed manual control of the traffic while, in Experiment II, the scenario was highly automated and the subjects were tasked with only monitoring the situation. The dynamic memory performance was measured by interrupting the scenario and having the subjects recall the traffic situation at the moment of simulation interruption. The …

Effect Of Joystick Versus Control Yoke Use On Personal Computer (Pc) Flight Training: A Comparative Analysis, Gregory Alan Fontaine

Master's Theses - Daytona Beach

The purpose of this study was to provide a comparative performance analysis of a generic control yoke device and a generic joystick device. The comparison provided data needed for further evaluation of personal computer (PC) aircrew training device (ATD) potential. Both devices were used in support of the same PC flight simulation software program, and were evaluated using the experimental research method. Objective and subjective data were obtained during controlled testing, and subsequently analyzed using basic summation and t-test methods. The results tested the research hypothesis that there is no significant difference in personal computer ATD operator performance using a …

Effect Of A Range Ring And Of Intruder Vertical Rate On Pilot Perception Of Separation On A Cockpit Display Of Traffic Information, Paul V. Wassell

Master's Theses - Daytona Beach

This study was conducted to determine the effect of a range ring and intruder vertical rate on pilots’ perception of aircraft separation as viewed on a cockpit display of traffic information. A group of 30 pilots from Embry-Riddle Aeronautical University participated as subjects. SuperCard® Version 1.6 software and a Macintosh IIsi® personal computer were employed to generate the simulation of a cockpit display of traffic information. Each pilot monitored 80 unique scenarios in which they determined, as early as possible, what the vertical miss distance would be when a single intruder passed ownship. The pilots’ decision time and perceived vertical …

A Feasibility Study Of A Private Entity Competing With Fbos For Airline Ground Handling Contracts, Carlos A. Vergas

Master's Theses - Daytona Beach

This thesis investigates whether a private entity can compete with fixed base operators (FBOs) for airline ground handling contracts. Separating the research method into five phases, the author first conducts a need analysis. Then, the author dissects the structure of existing ground handling contracts. Thirdly, the average service charges presently in place are tabulated. Fourthly, a financial analysis is performed including the calculation of the break-even point at a profit. Finally, a model of ground handling operation is simulated using an existing air carrier’s ground handling contract.