Engineering Commons^™

Development Of A Master Of Software Assurance Reference Curriculum, Andrew J. Kornecki, James Mcdonald, Julia H. Allen, Mark Ardis, Nancy Mead, Richard Linger, Thomas B. Hilburn

Department of Electrical Engineering and Computer Science - Daytona Beach

The Next Generation Air Traffic Management system (NextGen) is a blueprint of the future National Airspace System. Supporting NextGen is a nation-wide Aviation Simulation Network (ASN), which allows integration of a variety of real-time simulations to facilitate development and validation of the NextGen software by simulating a wide range of operational scenarios. The ASN system is an environment, including both simulated and human-in-the-loop real-life components (pilots and air traffic controllers).Real Time Distributed Simulation (RTDS) developed at Embry-Riddle Aeronautical University, a suite of applications providing low and medium fidelity en-route simulation capabilities, is one of the simulations contributing to the ASN. …

Fault Tree Analysis For Safety/Security Verification In Aviation Software, Andrew J. Kornecki, Mingye Liu

Department of Electrical Engineering and Computer Science - Daytona Beach

The Next Generation Air Traffic Management system (NextGen) is a blueprint of the future National Airspace System. Supporting NextGen is a nation-wide Aviation Simulation Network (ASN), which allows integration of a variety of real-time simulations to facilitate development and validation of the NextGen software by simulating a wide range of operational scenarios. The ASN system is an environment, including both simulated and human-in-the-loop real-life components (pilots and air traffic controllers).Real Time Distributed Simulation (RTDS) developed at Embry-Riddle Aeronautical University, a suite of applications providing low and medium fidelity en-route simulation capabilities, is one of the simulations contributing to the ASN. …

Mechanics Of Hip Dysplasia Reduction In Infants Using The Pavlik Harness: A Physics Based Computational Model, Orlando Ardila, Eduardo Divo, Faissal Moslehy, George Rab, Alain Kassab, Charles Price

Mechanical Engineering - Daytona Beach

Biomechanical factors influencing the reduction of dislocated hips with the Pavlik harness in patients of Developmental Dysplasia of the Hip (DDH) were studied using a three-dimensional computer model simulating hip reduction dynamics in (1) subluxated and (2) fully dislocated hip joints. Five hip adductor muscles were identified as key mediators of DDH prognosis, and the non-dimensional force contribution of each in the direction necessary to achieve concentric hip reductions was determined. Results point to the adductor muscles as mediators of subluxated hip reductions, as their mechanical action is a function of the degree of hip dislocation. For subluxated hips in …

Exploring Current And Projected Skills And Knowledge Areas To Meet U.S. Commercial Space Industry Needs, Sonya A. H. Mcmullen, Mac J. Mcmullen, Kenneth Witcher

Publications

In 2007, the Committee on Meeting the Workforce Needs for the National Vision for Space Exploration published findings related to age and skills of the current National Aeronautics and Space Administration (NASA) workforce and projected potential expertise shortages as a result of retirement in the 2014-2015 time frame. In addition, the expanding commercial space industry in both the United States and Europe will likely create further demand for space experts in engineering and a variety of related fields. Although NASA contributes $162 million in funding for education programs annually, those programs target kindergarten through grade 12, not collegiate-level programs. Further, …

A Novel Method For Prediction Of Mobile Robot Maneuvering Spaces, Patrick N. Currier, Alfred L. Wicks

Mechanical Engineering - Daytona Beach

As the operational uses of mobile robots continue to expand, it becomes useful to be able to predict the admissible maneuvering space to prevent the robot from executing unsafe maneuvers. A novel method is proposed to address this need by using force-moment diagrams to characterize the robot’s maneuvering space in terms of path curvature and curvature rate. Using the proposed superposition techniques, these diagrams can then be transformed in real-time to provide a representation of the permissible maneuvering space while allowing for changes in the robot’s loading and terrain conditions. Simulation results indicate that the technique can be applied to …

A Novel Resistance Exercise Machine For Use In A Lower Body Negative Pressure Box To Counteract The Effects Of Weightlessness, Christine M. Dailey

Doctoral Dissertations and Master's Theses

Physiological deconditioning is a critical problem in space, especially during long-term missions. Resistance exercise coupled with lower body negative pressure (LBNP) has been shown to be effective in counteracting some of the deconditioning related problems. This thesis describes the development of a compact and effective resistance exercise machine that works within an existing environmentally controlled LBNP Box and is designed to simulate both exercise and sitting, to prevent microgravity-induced deconditioning by simulating physiological and biomechanical features of upright exercise and daily activities. Theoretical calculations are carried out to determine whether kinematics, musculoskeletal loadings, and metabolic rate during supine exercise within …

Technology Corner: Calculating The Number Of Android Lock Patterns: An Unfinished Study In Number Theory, Gary C. Kessler

Security Studies & International Affairs - Daytona Beach

"Although one is unlikely to ever want to brute-force an Android lock pattern, many do wonder about the relative strength of the lock pattern versus a multi-digit personal identification number (PIN). It becomes obvious pretty quickly that there are many more lock patterns than the 10,000 possible four-digit PINs."--from the introduction.

Book Review: Placing The Suspect Behind The Keyboard: Using Digital Forensics And Investigative Techniques To Identify Cybercrime Suspects, Thomas Nash

Journal of Digital Forensics, Security and Law

In this must read for any aspiring novice cybercrime investigator as well as the seasoned professional computer guru alike, Brett Shaver takes the reader into the ever changing and dynamic world of Cybercrime investigation. Shaver, an experienced criminal investigator, lays out the details and intricacies of a computer related crime investigation in a clear and concise manner in his new easy to read publication, Placing the Suspect behind the Keyboard. Using Digital Forensics and Investigative techniques to Identify Cybercrime Suspects. Shaver takes the reader from start to finish through each step of the investigative process in well organized …

Automating Vendor Fraud Detection In Enterprise Systems, Kishore Singh, Peter Best, Joseph Mula

Journal of Digital Forensics, Security and Law

Fraud is a multi-billion dollar industry that continues to grow annually. Many organizations are poorly prepared to prevent and detect fraud. Fraud detection strategies are intended to quickly and efficiently identify fraudulent activities that circumvent preventative measures. In this paper, we adopt a DesignScience methodological framework to develop a model for detection of vendor fraud based on analysis of patterns or signatures identified in enterprise system audit trails. The concept is demonstrated by developing prototype software. Verification of the prototype is achieved by performing a series of experiments. Validation is achieved by independent reviews from auditing practitioners. Key findings of …

Book Review: Professional Penetration Testing: Creating And Learning In A Hacking Lab 2e, Joshua Bartolomie

Journal of Digital Forensics, Security and Law

Organizations often strive for proactive information security programs in an effort to limit occurrence and impact of security breaches. However, traditional security programs run the risk of being unable to provide adequate insight and proactive awareness into real attack vectors that may exist within their organizations. With attack methods and efforts becoming increasingly aggressive, and effective, organizations must take equally assertive measures to protect their critical information and assets. Penetration testing is one of those tools that is often misunderstood, overlooked, and undervalued. A true adversary would not hesitate to exploit every potential to gain entry or cause a disruption …

Technology Corner: Calculating The Number Of Android Lock Patterns: An Unfinished Study In Number Theory, Gary C. Kessler

Journal of Digital Forensics, Security and Law

Although one is unlikely to ever want to brute-force an Android lock pattern, many do wonder about the relative strength of the lock pattern versus a multidigit personal identification number (PIN). It becomes obvious pretty quickly that there are many more lock patterns than the 10,000 possible four-digit PINs.

Science Column: Reconstruction: The Experimental Side Of Digital Forensics, Fred Cohen

Journal of Digital Forensics, Security and Law

Many in digital forensics seem to forget that the science part of digital forensics means experimentation and that implies a whole lot of things that most practitioners never learned.

Book Review: Iphone And Ios Forensic: Investigation, Analysis And Mobile Security For Apple Iphone, Ipad And Ios Devices, Simson Garfinkel

Journal of Digital Forensics, Security and Law

In April 2011 news outlets around the world revealed shocking news about Apple’s iPhone: for reasons that were not apparently clear, every iPhone contained a small SQLite database that logged where and when the user had been whenever the phone was turned on, and those records went back for pretty much as long as the user had owned their phone. Apple eventually declared that the data cache was the result of a bug and issued a software update to prune the database (it had previously grown without limit). Privacy activists rejoiced that their beloved iPhones were once again trustworthy. But …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Robust Control Methods For Nonlinear Systems With Uncertain Dynamics And Unknown Control Direction, Chau T. Ton

Doctoral Dissertations and Master's Theses

Robust nonlinear control design strategies using sliding mode control (SMC) and integral SMC (ISMC) are developed, which are capable of achieving reliable and accurate tracking control for systems containing dynamic uncertainty, unmodeled disturbances, and actuator anomalies that result in an unknown and time-varying control direction. In order to ease readability of this dissertation, detailed explanations of the relevant mathematical tools is provided, including stability denitions, Lyapunov-based stability analysis methods, SMC and ISMC fundamentals, and other basic nonlinear control tools. The contributions of the dissertation are three novel control algorithms for three different classes of nonlinear systems: single-input multiple output (SIMO) …

Dynamics And Control Of Higher-Order Nonholonomic Systems, Jaime Rubio HerváS

Doctoral Dissertations and Master's Theses

A theoretical framework is established for the control of higher-order nonholonomic systems, defined as systems that satisfy higher-order nonintegrable constraints. A model for such systems is developed in terms of differential-algebraic equations defined on a higher-order tangent bundle. A number of control-theoretic properties such as nonintegrability, controllability, and stabilizability are presented. Higher-order nonholonomic systems are shown to be strongly accessible and, under certain conditions, small time locally controllable at any equilibrium. There are important examples of higher-order nonholonomic systems that are asymptotically stabilizable via smooth feedback, including space vehicles with multiple slosh modes and Prismatic-Prismatic-Revolute (PPR) robots moving open liquid …

Nonlinear Control For Dual Quaternion Systems, William D. Price

Doctoral Dissertations and Master's Theses

The motion of rigid bodies includes three degrees of freedom (DOF) for rotation, generally referred to as roll, pitch and yaw, and 3 DOF for translation, generally described as motion along the x, y and z axis, for a total of 6 DOF. Many complex mechanical systems exhibit this type of motion, with constraints, such as complex humanoid robotic systems, multiple ground vehicles, unmanned aerial vehicles (UAVs), multiple spacecraft vehicles, and even quantum mechanical systems. These motions historically have been analyzed independently, with separate control algorithms being developed for rotation and translation. The goal of this research is to study …

Project Haiti 2012: Providing An Experiential Learning Experience Through The Design And Delivery Of A Water Purifier In Haiti, Yung Wong, Johnathon Camp, Shavin Pinto, Kyle Fennesy, Marc Compere, Yan Tang

Publications

In this paper, we share our experiences and lessons learned from Project Haiti 2012, a project to design and install a water purification system serving 20,000 people per day in the largest tent city in Haiti. Project Haiti 2012 was the third and largest system we have built for Haitians and represents a huge success for all participants and stakeholders. This paper discusses the unique experiential learning opportunity involved in the design and delivery of the water purifier in a foreign developing country. Multiple positive educational, social, and economic outcomes were achieved including students applying knowledge gained from coursework towards …

Walking, Running, And Resting Under Time, Distance And Average Speed Constraints: Optimality Of Walk-Run-Rest Mixtures, Leroy L. Long Iii, Manoj Srinivasan

Publications

On a treadmill, humans switch from walking to running beyond a characteristic transition speed. Here, we study human choice between walking and running in a more ecological (non-treadmill) setting. We asked subjects to travel a given distance overground in a given allowed time duration. During this task, the subjects carried, and could look at, a stop-watch that counted down to zero. As expected, if the total time available were large, humans walk the whole distance. If the time available were small, humans mostly run. For an intermediate total time, humans often use a mixture of walking at a slow speed …

Academic And Social Barriers To Black And Latino Male Collegians' Success In Engineering And Related Stem Fields, Terrell Lamont Strayhorn, Leroy L. Long Iii, Joseph Allen Kitchen, Michael Steven Williams, Meg E. Stenz

Publications

Historically underrepresented racial/ethnic minorities (i.e. African Americans, Latinos, and Native Americans) have experienced barriers to their success in engineering and related STEM fields. These student populations have had lower degree attainment rates, switch to non-STEM majors more frequently, and experience unique social challenges when compared to White and Asian Pacific Islander counterparts. To examine these findings, nearly 50 interviews were conducted and analyzed in the present study to better understand the academic and social experiences of African American and Latino American men in these fields. Interviews revealed that these students tend to (1) feel alone and invisible, (2) lack same …

How Relationships With Faculty And Peers Affect Value Development In Undergraduate Engineering Education: A National Survey Analysis, Leroy L. Long Iii, Michael Steven Williams, Terrell Lamont Strayhorn

Publications

To prepare students for the serious ethical dilemmas encountered in STEM (science, technology, engineering, and mathematics), higher education educators strive to influence students’ value development. Despite this goal, little is known about value development in undergraduate engineering education. Survey data from the 2008-2009 national administration of the revised College Student Experiences in STEM Questionnaire (CSESQ) was analyzed to examine the relationship between students’ engagement with faculty and peers and their perceived value development. Findings from the present study offer insight into (a) engineering students’ value development in college, and (b) the influence of relationships with peers and faculty members on …

Implementing Jet Aircraft Training In A University Setting: Instructor Perceptions And Lessons Learned, Scott R. Winter, Jennifer E. Kirschner, Steven M. Leib, Richard O. Fanjoy

Publications

This paper presents the findings of a phenomenological study of instructor pilot first-hand experiences when conducting training for collegiate flight students in a jet aircraft. While jet training has been conducted in simulators in the past, this was one of the first instances of training in an actual aircraft. A total of 22 students completed training in a very light jet aircraft during the spring semester of their junior year at the subject university. A group of four instructors conducted both simulator and flight training with the students. Surveys were used to collect data from instructors longitudinally throughout the length …

Examining Student Success: The Transition From H.S. To College Of First-Year Engineering Students, Leroy L. Long Iii

Publications

To improve retention and graduation rates, institutions of higher education have become increasingly interested in the experiences of first-year students. This is of even greater importance in STEM (science, technology, engineering and mathematics) fields such as engineering which are crucial for U.S. global competitiveness and homeland security. Interviews were conducted with six (6) first-year engineering students at a large, predominantly White land-grant institution located in the Midwestern region of the country to study their decisions and experiences during the transition from high school to college. More specifically, the investigation focused on under-represented students within undergraduate engineering. Interviews focused on three …

First-Year Engineering Program: Student Instructional Leadership Team - Expanded And Restructured, Leroy L. Long Iii, Alison Snyder, Russell Stech, Ben Jelen, Cody Allison, John Merrill

Publications

Since its initial creation, the Student Instructional Leadership Team (SILT) within the First-Year Engineering Program (FEP) at The Ohio State University (OSU) has been responsible for training and supporting students and instructional staff. In recent years, SILT has been expanded and restructured to meet the needs of a growing student body and ever-changing program. SILT currently has 13 members working across all 4 tracks of FEP. This team helps manage over 2,000 students and 200 teaching assistants (TAs). SILT assists with various FEP resources such as its computer lab and laboratories. SILT also provides professional development opportunities for student employees. …

Heteroclinic And Homoclinic Connections Between The Sun-Earth Triangular Points And Quasi-Satellite Orbits For Solar Observations, Pedro J. Llanos, Gerald R. Hintz, Martin W. Lo, James K. Miller

Publications

Investigation of new orbit geometries exhibits a very attractive behavior for a spacecraft to monitor space weather coming from the Sun. Several orbit transfer mechanisms are analyzed as potential alternatives to monitor solar activity such as a sub-solar orbit or quasi-satellite orbit and short and long heteroclinic and homoclinic connections between the triangular points L4 and L5 and the collinear point L3 of the CRTBP (circular restricted three-body problem) in the Sun-Earth system. These trajectories could serve as channels through where material can be transported from L5 to L3 by performing small maneuvers at the departure of the Trojan orbit. …

E-Learning In Multi-Cultural Environments: An Analysis Of Online Cabin Crew Training, Jose Felix De Brito Neto

Doctoral Dissertations and Master's Theses

Throughout the first decade of this century, the airline industry struggled with many challenges stemming from unstable oil prices and natural disasters. Attention was given to people as tools for competitive advantage. The airline industry focused on Human Resource Management and, as a result, e-learning gained increasing attention as it imparted knowledge on an asynchronous and global basis with substantially reduced costs. However, while focusing on learning technologies, organizations failed to acknowledge learners needs and cultural backgrounds by creating neutral e-learning environments, which resulted in ineffective training and reduced performance improvement. This thesis aimed to study the perceptions of a …

2012 Manufacturers Safety Management System Pilot Project Report Design And Manufacturing Organizations, Jeff Duven, Linda Navarro, David Hempe, Alan J. Stolzer

Publications

In October, 2009, the Aircraft Certification Service (AIR) chartered a team to conduct the Manufacturers' Safety Management Systems (MSMS) pilot project. The pilot project began in January, 2011, and encourages voluntary implementation of Safety Management Systems (SMS) among aviation Design and Manufacturing (D&M) organizations in order to allow the FAA to assess how to provide oversight of these systems. Eleven companies representing the breadth of organizations that AIR oversees participated.

The MSMS pilot project culminated in December, 2012. Information, results, and lessons learned from the pilot project were captured via the MSMS Teams' final deliverable to AIR-150. The report was …

The Effects Of Energy Beverages In Counteracting The Symptoms Of Mild Hypoxia At Legal General Aviation Altitudes, Daniel Mark Bull

Doctoral Dissertations and Master's Theses

The purpose of this thesis was to conduct preliminary research, in the form of a pilot study, concerning the natural effects of hypoxia compared to the effects of hypoxia experienced after the consumption of an energy beverage. The study evaluated the effects of hypoxia on FAA certificated pilots at a simulated legal general aviation altitude, utilizing the normobaric High Altitude Lab (HAL) located at Embry Riddle Aeronautical University, Daytona Beach, Florida. The researcher tested 11 subjects, who completed three simulated flight tasks within the HAL using the Frasca International Mentor Advanced Aviation Training Device (AATD). The flight tasks were …

Implementation Of Microwave Transmissions For Rocket Exhaust Plume Diagnostics, Nicholas George Coutu

Doctoral Dissertations and Master's Theses

Rocket-launched vehicles produce a trail of exhaust that contains ions, free electrons, and soot. The exhaust plume increases the effective conductor length of the rocket. A conductor in the presence of an electric field (e.g. near the electric charge stored within a cloud) can channel an electric discharge. The electrical conductivity of the exhaust plume is related to its concentration of free electrons. The risk of a lightning strike in-flight is a function of both the conductivity of the body and its effective length. This paper presents an approach that relates the electron number density of the exhaust plume to …

Novel Airframe Design For The Dual-Aircraft Atmospheric Platform Flight Concept, Eric Michael Mckee

Doctoral Dissertations and Master's Theses

A high-altitude, long-endurance unmanned aerial airframe was designed for the innovative Dual-Aircraft Atmospheric Platform flight concept that exploits stratospheric wind velocity gradients to remain aloft indefinitely. Classical aircraft preliminary design techniques and high-fidelity tools were used to establish a baseline configuration.

Performance characteristics of numerous airfoil profiles were evaluated with two-dimensional flow software in an effort to determine the best-candidate airfoil for the unique application. Vortex-Lattice method tools were used to investigate the sensitivity of three-dimensional design parameters upon overall vehicle aerodynamic performance and determine both static and dynamic stability characteristics of the airframe. Performance capabilities of the finalized airframe …