Engineering Commons^™

A Cross-Sectional Investigation Of The Relationships Education, Certification, And Experience Have With Knowledge, Skills, And Abilities Among Aviation Professionals, Daryl Watkins, Jason M. Newcomer, Matthew P. Earnhardt, James W. Marion, Rose A. Opengart, Aaron M. Glassman

International Journal of Aviation, Aeronautics, and Aerospace

The aviation industry is a complex system with many different segments and as such, makes hiring the right person a complicated endeavor. Previous research suggested that knowledge, skills, and abilities (KSAs) are composed of elements that include education, certification, and experience (ECE). The relative importance of ECE is dependent on the type of job within the aviation sector. The objective of this mixed-methods concurrent triangulation study was to examine aviation industry professionals’ perceived relationship between their ECE and the development of their KSAs. The convenience sample consisted of 404 professionals in the aviation industry who completed the KSA Composite Measure …

Determination Of Rejected Landing Roll Runway Point-Of-No-Return And Go-Around In Transport Category Airplanes, Nihad E. Daidzic, Ph.D., Sc.D.

International Journal of Aviation, Aeronautics, and Aerospace

The decelerate-accelerate-takeoff maneuver in transport category airplanes has been discussed. Mathematical model based on total energy conservation has been used to calculate the rejected landing point-of-no-return on a runway which will still enable the airplane to safely execute go-around and achieve regulatory screen heights and takeoff safety speeds. After this point has been exceeded or below the point-of-no-return speed no go-around should ever be considered. Landing long and fast and/or decelerating on slippery runways may very well result in an overrun which could be prevented if the go-around is attempted before reaching this critical runway point. The point-of-no-return on the …

Evidential Reasoning For Forensic Readiness, Yi-Ching Liao, Hanno Langweg

Journal of Digital Forensics, Security and Law

To learn from the past, we analyse 1,088 "computer as a target" judgements for evidential reasoning by extracting four case elements: decision, intent, fact, and evidence. Analysing the decision element is essential for studying the scale of sentence severity for cross-jurisdictional comparisons. Examining the intent element can facilitate future risk assessment. Analysing the fact element can enhance an organization's capability of analysing criminal activities for future offender profiling. Examining the evidence used against a defendant from previous judgements can facilitate the preparation of evidence for upcoming legal disclosure. Follow the concepts of argumentation diagrams, we develop an automatic judgement summarizing …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Electronic Voting Service Using Block-Chain, Kibin Lee, Joshua I. James, Tekachew G. Ejeta, Hyoung J. Kim

Journal of Digital Forensics, Security and Law

Cryptocurrency, and its underlying technologies, has been gaining popularity for transaction management beyond financial transactions. Transaction information is maintained in the block-chain, which can be used to audit the integrity of the transaction. The focus on this paper is the potential availability of block-chain technology of other transactional uses. Block-chain is one of the most stable open ledgers that preserves transaction information, and is difficult to forge. Since the information stored in block-chain is not related to personally identify information, it has the characteristics of anonymity. Also, the block-chain allows for transparent transaction verification since all information in the block-chain …

Emerging Tools For Evaluating Safety Management Systems Effectiveness, T. Brady, A. Stolzer

Publications

Safety Management Systems (SMS) have become prevalent in a host of industries, including aviation, for managing safety, but little research has been performed to-date on measuring the effectiveness of SMS. This research examined the independent application of two related concepts to assess effective- ness: IO/SMS, an Input-Output economics concept applied to SMS, and Data Envelopment Analysis (DEA). Input-Output (IO) is a method for systematically determining the inter-relationships among ele- ments in a system. To determine if IO could be applied to SMS, it was necessary to calculate the relative importance to the system of the four components of SMS. Five …

Design And Commissioning Of A Community Scale Solar Powered Membrane-Based Water Purification System In Haiti, Shavin Pinto, Yung Wong, Kyle Fennesy, Yan Tang, Marc Compere

Publications

This paper presents the design and commissioning of a solar powered water purification system at the Ryan Epps Home for Children (REHC) in Michaud, Haiti. This system supplies clean drinking water to the 200 children who live and go to school at REHC and also to the community in the form of a micro-business. This micro-business is the mechanism for income generation for sustainable system operation. The purifier uses a three stage filtration system with a disc-type sediment filter, a 0.1 micron ultrafiltration membrane, and an ultraviolet light for disinfection. The backwash cycle extends the life of the ultrafiltration membrane …

How Undergraduates' Involvement Affects Sense Of Belonging In Courses That Use Technology, Leroy L. Long Iii

Publications

In order to increase the number of American degree recipients in science, technology, engineering and mathematics (STEM), academics must continually develop ways to improve students’ interest, retention, and success in fields like engineering. Prior researchers have studied the use of educational technology as a way to improve student outcomes and skills. Previous scholars have also investigated students’ perceptions of the usefulness of technology. However, it is unclear if a statistically significant relationship exists between students’ involvement in courses that use technology and their sense of belonging to others on campus. The present study addressed this gap by examining the relationship …

Emulating The Wright State Model For Engineering Mathematics Education: Improving First-Year Engineering Student Retention, Leroy L. Long Iii, Lisa M. Abrams, Lisa Barclay, Jamie Paulson

Publications

In 2004, Wright State University developed an innovative mathematics course for first-year engineering undergraduates in order to increase student retention, motivation and academic success. To date, the Wright State model has had a positive impact on student retention, motivation and academic success by increasing graduation rates and GPAs among participants. During the fall of 2014 and 2015, one large public university in the Midwest with more selective admission criteria decided to pilot a course based on the Wright State Model for Engineering Mathematics Education. Using the Wright State model, a mathematics for engineering course was offered to prospective students so …

Students' Perception Of The Flipped Classroom In Graphical Communications, Lulu Sun

Publications

The flipped classroom requires students to study concepts before the class, apply what they learn in the classroom, and work with other students, which then makes it possible to get immediate feedback from the instructor. However, the student’s perception of the flipped classroom is not widely investigated in the area of engineering graphics. This paper presents a study of the flipped classroom in a Graphical Communications course. Students are required to study course material online before the face-to-face classroom experience. The online course study includes multimedia materials and an online quiz that they are required to take. The results of …

Implementation And Evaluation Of A Second Language Acquisition-Based Programming Course, Christina Frederick, Lulu Sun, Caroline Liron, Matthew A. Verleger, Rachel Cunningham, Paula S. Espejo

Publications

This paper describes initial findings of an NSF funded project under the Research Initiation Grant in Engineering Education (RIGEE) program. The RIGEE program is a multidisciplinary program focused on developing innovative, implementing and assessing innovative programs that enhance engineering education. The project applied theory and methods of second language acquisition (SLA) to teach an introductory programming course in engineering. The project is a two year long project implemented in multiple sections of an introductory programming class at a technological university, and assessed throughout implementation. It included a component whereby student assistants participated in project development and implementation, and were mentored …

What Are The Predictors Of System-Wide Trust Loss In Transportation Automation?, Stephen Rice, Scott R. Winter, John E. Deaton, Ismael Cremer

Publications

Prior research has examined how individuals place trust in single (e.g., Meyer, 2001, 2004) and multiple (e.g., Geels-Blair, Rice, & Schwark, 2013) automated devices when one fails. This has shown that participants are influenced by system-wide trust (SWT). What has been missing is an investigation into what types of people succumb to SWT effects. The current study attempts to replicate SWT findings and identify possible predictors of individuals likely to be influenced by SWT. The findings did demonstrate a replication of SWT. The study found that ‘‘feelings of negativity when automated devices fail’’ was a significant predictor of SWT theory.

Wide-Scale Small Unmanned Aircraft System Access To The National Airspace System, John Robbins, Brent Terwilliger, David Ison, Dennis Vincenzi

Publications

Expected revisions of federal policies and regulations for the operation and certification of small unmanned aircraft systems (sUAS) are anticipated to significantly increase the volume of traffic in the National Airspace System (NAS). By investigating critical needs of regulatory compliance and safety, as well as new advancements, it may be possible to identify strategies to address the most pressing concerns of sUAS integration. Findings and recommendations from this research are presented to highlight implications and possible solutions to urgent needs of UAS stakehold-ers, including industry, government, and academia.

Aircraft Detection And Tracking Using Uav-Mounted Vision System, Yan Zhang

Doctoral Dissertations and Master's Theses

For unmanned aerial vehicles (UAVs) to operate safely in the national airspace where non-collaborating flying objects, such as general aviation (GA) aircraft without automatic dependent surveillance-broadcast (ADS-B), exist, the UAVs' capability of “seeing" these objects is especially important. This “seeing", or sensing, can be implemented via various means, such as Radar or Lidar. Here we consider using cameras mounted on UAVs only, which has the advantage of light weight and low power. For the visual system to work well, it is required that the camera-based sensing capability should be at the level equal to or exceeding that of human pilots. …

Direct Adaptive Control For Stability And Command Augmentation System Of An Air-Breathing Hypersonic Vehicle, Ron Aditya

Doctoral Dissertations and Master's Theses

In this paper we explore a Direct Adaptive Control scheme for stabilizing a non-linear, physics based model of the longitudinal dynamics for an air breathing hypersonic vehicle. The model, derived from first principles, captures the complex interactions between the propulsion system, aerodynamics, and structural dynamics. The linearized aircraft dynamics show unstable and non-minimum phase behavior. It also shows a strong short period coupling with the fuselage-bending mode. The value added by direct adaptive control and the theoretical requirements for stable convergent operation is displayed. One of the main benefits of the Directive Adaptive Control is that it can be implemented …

Aerodynamic Trade Study Of Compound Helicopter Concepts, Julian Roche

Doctoral Dissertations and Master's Theses

The relative performance attributes of compound helicopter concepts have been examined, including their potential for meeting the requirements of several challenging mission profiles. For each concept, which included lift and/or propulsive compounding, a suite of aerodynamic performance models was developed using energy methods. In the case of a lift-compounded concept, an aerodynamic model representing the force interaction effects of the main rotor wake with the wing was also developed. Models of a conventional helicopter and of a tiltrotor were implemented as well, and the results used as a datum for comparison. In each case, the predictive capabilities of the model …

An Investigation Of Cooling Configurations In Gas Turbine Engines Using Jet Impingement, Bhushan Upalkar

Doctoral Dissertations and Master's Theses

A numerical investigation for predicting the heat transfer effects of turbulence was conducted by making a scaled-up model of a section in a jet impingement channel. Different turbulence models were run and the results were compared to experimental data. Experimental comparisons were made for impingement channels between a baseline case, which is a rectangular array of jets of 20 rows and 3 jets per row, and different hole spacing configurations. The heat transfer was measured using Temperature Sensitive Paint. The turbulence model v²-f gave the most accurate prediction with an error of about 17% with the EB k-E, with an …

Low-Velocity Impact Analysis Of Composite Repair Patches Of Different Shapes, Sarvesh Baliga

Doctoral Dissertations and Master's Theses

The area under crack for various structures can be effectively repaired by the use of composite materials. Low velocity impact can cause barely visible damage to the interior structure of laminated composite. These impacts can cause delamination in composite materials. In this study, a Finite Element Analysis was conducted using Abaqus/Explicit and the results of the analysis were compared to the experimental data from literature. E-glass/epoxy composite laminate was subjected to a low velocity impact test. To study the effect of patch repair, a composite patch was applied on a cracked laminate and a low velocity impact was then conducted …

Experimental And Computational Investigation Of Ribbed Channels For Gas Turbine Thermal Management, Yash T. Mehta

Doctoral Dissertations and Master's Theses

This study focuses on the computational benchmarking as well as validation against experimental results of a rib roughed surface in an internal channel of a stationary turbine blade. STAR-CCM+ was utilized to replace a model from a published article, and to analyze the CFD conjugate heat transfer by determining the turbulence model that best matched the published experimental values. Using those computational conditions and CFD results, an in house experimental rig was validated by comparing convective heat transfer coefficients and pressure profiles. This cooling method, when compared to a smooth channel, enhances turbulent mixing my separating and reattaching the boundary …

Lagrangian Points And Jacobi Constants For A Class Of Asteroids, Tasneem Rashid

Doctoral Dissertations and Master's Theses

Asteroid Gravitational Potentials are difficult to model owing to their irregularity in shape. This thesis focuses on two approaches to model asteroid gravity fields, namely, multiple-body and spherical harmonics modeling. Computation of gravity potential serves as a first step to determine equilibrium points called Lagrangian points for a spacecraft orbiting as an asteroid. Further, Jacobi analysis is carried out to determine zero-velocity regions, i.e., inaccessible regions corresponding to the unstable Lagrangian points. Multiple sphere modeling was studied through analysis of so called Asteroid Restricted Three and Four Body Problems, providing insight into the method of modeling an asteroid as a …

An Approach To Automotive Electrification And Testing, Christopher Rowe

Doctoral Dissertations and Master's Theses

In order to compete in the EcoCAR 2 competition, Embry-Riddle Aeronautical University has redesigned the Powertrain of a 2013 Chevrolet Malibu into a plug-in hybrid electric vehicle. This endeavor was made possible by the EcoCAR 2 competition sponsored by the Department of Energy, General Motors, and Argonne National Laboratory. The Powertrain was changed from a conventional internal combustion engine with a start/stop capability, to a fully electric Powertrain, with a diesel generator, and plug in charging capability. This paper will cover the electrical work performed on the vehicle during the summer prior to year three of the competition, EcoCAR 2 …

Design, Fabrication, And Testing Of A Proprioceptive Electroadhesion Pad For Space Applications, Walter Saravia

Doctoral Dissertations and Master's Theses

The purpose of this study is to design, analyze, and fabricate an electroadhesion mechanism with the goal of providing controlled electrostatic adhesion to objects with little known surface finish, of varying curvature, and different materials. The main purpose of the mechanism is that of ensuring a soft docking, controlled in closed loop, for attachment to large pieces of orbital debris. Other envisaged purposes for the mechanism are sample collection and manipulation in free-fall and in-situ analysis of cohesive forces in regolith at small bodies, such as asteroids or comets. Electrostatic finite element analysis was performed on various electroadhesion pad designs …

Numerical Study Of Synthetic-Jet Actuation Effect On Airfoil Trailing Edge Noise, Marco Sansone

Doctoral Dissertations and Master's Theses

The current study conducts numerical simulations to assess the possibility of employing Synthetic Jet Actuators (SJAs) as active noise control devices for reduction of airfoil acoustic radiation. High-accuracy numerical efforts employ a sixth-order accurate Navier-Strokes solver implementing a low-pass filtering of poorly resolved high-frequency solution content to retain numerical accuracy and stability over the range of transitional flow regimes. In the adopted numerical procedure, the actuator is modeled without its resonator cavity through imposing a simple fluctuating-velocity boundary condition at the bottom orifice of the actuator. The orifice cavity with the properly defined boundary condition is embedded into the airfoil …

The Three-Dimensional Turbulent Boundary Layer On A Rotating Disk, Daniel Digre

Doctoral Dissertations and Master's Theses

Three-dimensional turbulent boundary layers (3DTBL) are seen quite commonly in nature as well as in the engineering applications. Despite this, very few high Reynolds number studies have been carried out on these boundary layers, particularly focusing on eddy structure, eddy scales and their interactions. The current study focused on developing, characterizing and evaluating an experimental framework to study high Reynolds number #3DTBL on a rotating disk with the long-term goal of carrying out high-fidelity measurements. The rotating disk flow is characterized by weak centrifugal pumping which sets up the cross flow that leads to turbulence. The tangential and radial velocities …

Computation Of Hypersonic Flows With Lateral Jets Using K-Ω Turbulence Model, Spatika Dasharati Iyengar

Doctoral Dissertations and Master's Theses

Thermal Protection systems (TPS) are used as shields in space vehicles which encounter high heat and temperatures at the reentry altitudes. Among them, the cooling techniques and the ablative coatings are most popular. However, they have their own weight limitations. In the recent decade, another classification of TPS called the Non-Ablative Thermal Protection systems (NaTPS) have gained significance. The spike-lateral jet method is an NaTPS concept proposed for drag and heat flux reduction in hypersonic nose cones. Numerical simulations are conducted to analyze the effectiveness of spike-lateral jet concept at re-entry altitudes. The spike attached to the hemispherical nose has …

Sub-Orbital Spaceflight – An Addition To Our Multi-Modal Transportation System, Scott Haeffelin

Space Traffic Management Conference

The number of commercial spaceflights will be increasing by orders of magnitude over the next several decades. The current volume of space traffic can be managed on a case-by-case basis and there is little impact to the National Airspace System (NAS). This will change as more spaceports become operational, commercial sub-orbital flight companies begin serving their customers and as the cost of these flights begin to decrease. Current regulatory paths seek to allow the flexibility in the regulations for this industry to flourish while also maintaining a high standard of safety. There are, however, many nearsighted and old fashioned assumptions …

Improving The Integration Of Launch And Reentry Operations Into The National Airspace System, Gwendolyn Mazzotta, Daniel P. Murray

Space Traffic Management Conference

With increasing commercial space activities occurring in the National Airspace System, the FAA has identified a need for more efficient management of the NAS with respect to commercial space operations. Current methods for integration of aviation and space activities employ a segregation approach, in which hazard areas are constructed around launch and reentry operations and sections of airspace are closed to other users. Mission objectives and vehicle characteristics dictate the extent of the closure in terms of location, duration, and volume of airspace affected. Launches, reentries, and other operations have an effect on other NAS stakeholders, causing delays, changes to …

Space Data Integrator (Sdi) And Space Program Integrated Data And Estimated Risk (Spider): Proof-Of-Concept Software Solution For Integrating Launch And Reentry Vehicles Into The National Airspace System (Nas), Devin D. Dickens

Space Traffic Management Conference

The Space Data Integrator (SDI) Project is the initial step to satisfy the Federal Aviation Administration (FAA) strategic initiative to integrate commercial space launch and reentry vehicles into the National Airspace System. The project addresses the needs for greater situational awareness and monitoring, and increased response capability during non-nominal and catastrophic incidents during space operations.

The initial phase of this project leverages current FAA systems, and provide an initial demonstration of capability that will provide for state data from a commercial reentry vehicle to be ingested into a the FAA Traffic Flow Management System, and displayed on Traffic Situation Displays. …

Safe Operations Above Fl600, Lt. Col. Stephen Hunter

Space Traffic Management Conference

Safe Operations Above FL600

Abstract

With the increase in likelihood of near-term development of revenue-generating point-to-point suborbital flights and the increase in high-altitude-long-endurance commercial operations above FL600, the criticality of addressing operations above class A airspace has never been more pressing. While the Federal Aviation Administration describes the National Airspace System, it doesn’t offer a description that includes a top. Technological, physiological, physical and administrative limitations have relegated most air operations to FL600 and below. As that changes, previous work on Space Traffic Management (STM) concepts begin to take on new life and add to sincere considerations for adaptation or …