Engineering Commons^™

Investigation Of Communication Constraints In Distributed Multi-Agent Systems, Zhaoyang Fu

Doctoral Dissertations and Master's Theses

Based on a simple flocking model with collision avoidance, a set of investigations of multi-agent system communication constraints have been conducted, including distributed estimation of global features, the influence of jamming, and communication performance optimization. In flocking control, it is necessary to achieve a common velocity among agents and maintain a safe distance between neighboring agents. The local information among agents is exchanged in a distributed fashion to help achieve velocity consensus. A distributed estimation algorithm was recently proposed to estimate the group’s global features based on achieving consensus among agents’ local estimations of such global features. To reduce the …

Study Of Surface Tension, Natural Evaporation, And Subcooled Boiling Evaporation Of Aqueous Surfactant Solutions, Matthew John Lehman

Doctoral Dissertations and Master's Theses

The relation between surface tension and surfactant concentration and its effect on solution evaporation under natural convection and subcooled pool boiling is examined through experimental methods. Aqueous solutions of sodium lauryl sulfate (SLS), ECOSURFTM EH-14, and ECOSURFTM SA-9 are used in this study. SLS is an anionic surfactant while EH-14 and SA-9 are environmentally-friendly nonionic surfactants.

Surfactants, surface active agents, are known to affect evaporation performance of solutions and are studied in relation to water loss prevention and heat dissipation. Surfactants could be useful under drought conditions which present challenges to water management on a yearly basis in arid areas …

A Computer Program For The Coupled Implementation Of Meanline And Throughflow Methods To Simplify The Aerodynamic Design Of Multistage Axial Compressors, Alexander V. Rozendaal

Doctoral Dissertations and Master's Theses

A computer program capable of simplifying the preliminary aerodynamic design process of multistage axial compressors has been developed. This interactive design tool, named C-STAAC, combines the Meanline and Throughflow analysis capabilities of two independent compressor design codes to form one standalone system. The program greatly improves the efficiency of the Preliminary-to-Throughflow stages of compressor design by providing fully coupled interaction between the two platforms. The result enables the user to produce stacked airfoil geometry from only a handful of initial input parameters.

The program additionally offers a wide selection of pre- and post-processing capabilities that were not previously available with …

Safety Assurance Of Non-Deterministic Flight Controllers In Aircraft Applications, Alfonso Noriega

Doctoral Dissertations and Master's Theses

Loss of control is a serious problem in aviation that primarily affects General Aviation. Technological advancements can help mitigate the problem, but the FAA certification process makes certain solutions economically unfeasible. This investigation presents the design of a generic adaptive autopilot that could potentially lead to a single certification for use in several makes and models of aircraft. The autopilot consists of a conventional controller connected in series with a robust direct adaptive model reference controller. In this architecture, the conventional controller is tuned once to provide outer-loop guidance and navigation to a reference model. The adaptive controller makes unknown …

Designing Laboratories For Small Scale Digital Device Forensics, Richard P. Mislan, Tim Wedge

Annual ADFSL Conference on Digital Forensics, Security and Law

The ubiquity of small scale digital devices (SSDD), the public’s ever increasing societal dependence on SSDD, and the continual presence of SSDD at all types of crime scenes, including non-technical and violent crimes, demand a formalized curriculum for the education and training of future cyber forensic examiners. This paper presents the various SSDD forensics labs currently in use and under development for future use at the Purdue University Cyber Forensics Laboratory. The primary objective of each module is to provide specific real-world cases for the learning, comprehension, and understanding of hands-on investigative techniques and methodologies. The purpose of this paper …

Network Forensic Investigation Of Internal Misuse/Crime In Saudi Arabia: A Hacking Case, Abdulrazaq Al-Murjan, Konstantinos Xynos

Annual ADFSL Conference on Digital Forensics, Security and Law

There are ad-hoc guidelines and a limited policy on computer incident response that does not include computer forensic preparation procedures (e.g. logging incidents). In addition, these guidelines do not consider the requirement of Islamic law for admissible evidence at an organisational level in Saudi Arabia. Network forensic investigation might breach the Saudi law if they follow ad-hoc or international digital forensic standards such as Association of Chief Police Officers (ACPO) guidelines. This might put the organisation in a costly situation when a malicious employee sues an Islamic court. This is because the law of Saudi Arabia is complying with Islamic …

Paper Session Ii: Computer Forensics Field Triage Process Model, Marcus K. Rogers, James Goldman, Rick Mislan, Timothy Wedge, Steve Debrota

Annual ADFSL Conference on Digital Forensics, Security and Law

With the proliferation of digital based evidence, the need for the timely identification, analysis and interpretation of digital evidence is becoming more crucial. In many investigations critical information is required while at the scene or within a short period of time - measured in hours as opposed to days. The traditional cyber forensics approach of seizing a system(s)/media, transporting it to the lab, making a forensic image(s), and then searching the entire system for potential evidence, is no longer appropriate in some circumstances. In cases such as child abductions, pedophiles, missing or exploited persons, time is of the essence. In …

Emerging Business Models For Commercial Spaceports: Current Trends From The Us Perspective, Janet K. Tinoco, Chunyan Yu

Publications

Agenda for Presentation:

• US Commercial/Government Active Launch Sites
• Why Commercial Spaceports?
• Spaceport Business Model Drivers
• Spaceport Multi-Modal Facility and Infrastructure Requirements
• Emerging Spaceport Business Models
• Summary and Concluding Remarks

Development Of A National Repository Of Digital Forensic Intelligence, Mark Weiser, David P. Biros, Greg Mosier

Annual ADFSL Conference on Digital Forensics, Security and Law

Many people do all of their banking online, we and our children communicate with peers through computer systems, and there are many jobs that require near continuous interaction with computer systems. Criminals, however, are also “connected”, and our online interaction provides them a conduit into our information like never before. Our credit card numbers and other fiscal information are at risk, our children's personal information is exposed to the world, and our professional reputations are on the line.

The discipline of Digital Forensics in law enforcement agencies around the nation and world has grown to match the increased risk and …

Designing A Data Warehouse For Cyber Crimes, Il-Yeol Song, John D. Maguire, Ki Jung Lee, Namyoun Choi, Xiaohua Hu, Peter Chen

Annual ADFSL Conference on Digital Forensics, Security and Law

One of the greatest challenges facing modern society is the rising tide of cyber crimes. These crimes, since they rarely fit the model of conventional crimes, are difficult to investigate, hard to analyze, and difficult to prosecute. Collecting data in a unified framework is a mandatory step that will assist the investigator in sorting through the mountains of data. In this paper, we explore designing a dimensional model for a data warehouse that can be used in analyzing cyber crime data. We also present some interesting queries and the types of cyber crime analyses that can be performed based on …

Heat Transfer Analysis Of An Oblique Jet Impingement Cooling On Cmc Rough Surface, Karthik Krishna

Doctoral Dissertations and Master's Theses

A Ceramic Matrix Composite is high strength and high temperature capability composite, utilized in components like heat shield of space vehicles, flame holders and disc brakes. To be used in both static and dynamic components of a future gas turbine engine and even with high temperature capabilities of these CMC components, convection cooling will still likely be required. The surface of the CMC varies significantly from traditional super-alloy used in a modern engine, with large level of roughness and significant three-dimensional waviness. These complex features will impact the behavior of the near wall flows, and affect the heat transfer rates …

Selecting Effective Examples To Train Students For Peer Review Of Open‐Ended Problem Solutions, Matthew Verleger Dr., Kelsey J. Rodgers Dr., Heidi Diefes-Dux

Publications

Background Students conducting peer review on authentic artifacts require training. In the training studied here, individual students reviewed (score and provide feedback on) a randomly selected prototypical solution to a problem. Afterwards, they are shown a side-by-side comparison of their review and an expert’s review, along with prompts to reflect on the differences and similarities. Individuals were then assigned a peer team’s solution to review.

Purpose This paper explores how the characteristics of five different prototypical solutions used in training (and their associated expert evaluations) impacted students’ abilities to score peer teams’ solutions.

Design/Method An expert rater scored the prototypical …

Evaluating The Mechanisms Of Erosion For Coarse-Grained Materials, Maureen K. Corcoran, Ghada Ellithy, Michael K. Sharp, Johannes L. Wibowo

Publications

Efforts are currently underway by the U.S. Army Corps of Engineers (USACE) to perform a risk assessment of all dams and levees within their portfolio. The vast majority of that portfolio is earthen structures. Findings from the assessments have shown that the major risk drivers for these earth structures are related to erosion (internal and external), overtopping, poorly designed and constructed intrusions (such as pipe crossings), and other factors to a lesser degree (such as burrowing animals). Therefore, the USACE is currently investigating several of these failure modes with emphasis on internal and external erosion. This paper will highlight efforts …

Special Issue On Cyberharassment Investigation: Advances And Trends, Joanne Bryce, Virginia N. L. Franqueira, Andrew Marrington

Journal of Digital Forensics, Security and Law

Empirical and anecdotal evidence indicates that cyberharassment is more prevalent as the use of social media becomes increasingly widespread, making geography and physical proximity irrelevant. Cyberharassment can take different forms (e.g., cyberbullying, cyberstalking, cybertrolling), and be motivated by the objectives of inflicting distress, exercising control, impersonation, and defamation. Little is currently known about the modus operandi of offenders and their psychological characteristics. Investigation of these behaviours is particularly challenging because it involves digital evidence distributed across the devices of both alleged offenders and victims, as well as online service providers, sometimes over an extended period of time. This special issue …

The Impact Of Low Self-Control On Online Harassment: Interaction With Opportunity., Hyunin Baek, Michael M. Losavio, George E. Higgins

Journal of Digital Forensics, Security and Law

Developing Internet technology has increased the rates of youth online harassment. This study examines online harassment from adolescents with low self-control and the moderating effect of opportunity. The data used in this study were collected by the Korea Institute of Criminology in 2009. The total sample size was 1,091. The results indicated that low self-control, opportunity, and gender have a significant influence on online harassment. However, these results differed according to gender; for males, low self-control significantly impacted online harassment; for females, however, only low self-control significantly impacted online harassment. Furthermore, the interaction between low self-control and opportunity did not …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

A Legal Examination Of Revenge Pornography And Cyber-Harassment, Thomas Lonardo, Tricia Martland, Doug White

Journal of Digital Forensics, Security and Law

This paper examines the current state of the statutes in the United States as they relate to cyber-harassment in the context of "revenge porn". Revenge porn refers to websites which cater to those wishing to exploit, harass, or otherwise antagonize their ex partners using pornographic images and videos which were obtained during their relationships. The paper provide examples and illustrations as well as a summary of current statute in the United States. The paper additionally explores some of the various legal remedies available to victims of revenge pornography.

Differentiating Cyberbullies And Internet Trolls By Personality Characteristics And Self-Esteem, Lauren A. Zezulka, Kathryn C. Seigfried-Spellar

Journal of Digital Forensics, Security and Law

Cyberbullying and internet trolling are both forms of online aggression or cyberharassment; however, research has yet to assess the prevalence of these behaviors in relationship to one another. In addition, the current study was the first to investigate whether individual differences and self-esteem discerned between self-reported cyberbullies and/or internet trolls (i.e., Never engaged in either, Cyberbully-only, Troll-only, Both Cyberbully and Troll). Of 308 respondents solicited from Mechanical Turk, 70 engaged in cyberbullying behaviors, 20 engaged in only trolling behaviors, 129 self-reported both behaviors, and 89 self-reported neither behavior. Results yielded low self-esteem, low conscientiousness, and low internal moral values for …

Toward Online Linguistic Surveillance Of Threatening Messages, Brian H. Spitzberg, Jean Mark Gawron

Journal of Digital Forensics, Security and Law

Threats are communicative acts, but it is not always obvious what they communicate or when they communicate imminent credible and serious risk. This paper proposes a research- and theory-based set of over 20 potential linguistic risk indicators that may discriminate credible from non-credible threats within online threat message corpora. Two prongs are proposed: (1) Using expert and layperson ratings to validate subjective scales in relation to annotated known risk messages, and (2) Using the resulting annotated corpora for automated machine learning with computational linguistic analyses to classify non-threats, false threats, and credible threats. Rating scales are proposed, existing threat corpora …

From Xst To F-117a, Alan Brown

ERAU Prescott Aviation History Program

Learn the remarkable story of stealth technology from the man often referred to as “Mr. Stealth.” From 1975-1989 Alan Brown was a member of Lockheed “Skunk Works”, becoming program manager & chief engineer for the F-117A Stealth Fighter from initial concept until the first production aircraft was built, 1978 to 1982. Hear the inside story of the many challenges faced by the stealth program and how they were solved.

Seeing The Threat: Pilot Visual Detection Of Small Unmanned Aircraft Systems In Visual Meteorological Conditions, Jon M. Loffi, Ryan J. Wallace, Jamey D. Jacob, Jared C. Dunlap

International Journal of Aviation, Aeronautics, and Aerospace

One key challenge of integrating Unmanned Aircraft Systems (UAS) platforms into the National Airspace System (NAS) is the potential for midair collisions between manned aircraft and the unmanned system. The lack of an established UAS benchmark for Detect, Sense & Avoid Systems put the preponderance of avoidance efforts on manned aircraft pilots to visually see and avoid potential collision threats. The small size, unusual configurations, and diverse operational applications of unmanned systems make UAS platforms difficult to visually identify. This paper sought to determine the mean visibility distance of small UAS systems (sUAS) to an alerted pilot flying a general …

Project Daedalus: An Additive Manufacturing Vending Machine, Paul A. Galarnyk, Roxanna Stein, Priscilla Mcdonald, Sky Comarsh White, Matthew Caixeiro, Alexander Seifans, Chris Hays, Benjamin Sallick, Katherine Mcbrayer, Skyler Singleton, Scott Wt Kent

Student Works

The project was a research endeavor focused on designing and building a vending machine for 3D-printed parts. It also had the secondary objective of catalyzing leadership qualities among its membership by emphasizing individual responsibility and forward thinking. The project began in the spring of 2015, when the topic of autonomous 3D-printing was chosen, funding was secured, and the majority of the leadership was brought on. Over the summer and into the fall semester the team developed project requirements and infrastructure, and gathered members from the parent organization. By December of 2015 most of the machine design had been completed, and …

2016 General Aviation Flight Training Metrics, Steven Hampton, Ken Byrnes, Troy Techau

Publications

The study evaluates training at a collegiate flight training program (Embry-Riddle Aeronautical University) providing metrics for time and costs from zero time to a Commercial certificated Pilot with Instrument and Multi-Engine add-ons. Training times for flights and activities are pulled from a sophisticated database used at Embry-Riddle Aeronautical University (ERAU) and matched with flight and ground school lessons and then further subdivided to determine the amount of time spent training in areas of operation that are prescribed by the Federal Aviation Administration in the published Practical Test Standards and Airman Certification Standards for those seeking pilot licenses and ratings.

Provided …

On Safety Assessment Of Novel Approach To Robust Uav Flight Control In Gusty Environments, Vladimir Golubev, Petr Kazarin, William Mackunis, Sherry Borener, Derek Hufty

Publications

In a follow-up to our previous study, the current work examines the gust-induced “cone of uncertainty” in a small unmanned aerial vehicle’s (UAV) flight trajectory addressed in the context of safety assessments of UAV operations. Such analysis is a critical facet of the integration of unmanned aerial systems (UAS) into the National Airspace System (NAS), particularly in terminal airspace. The paper describes a predictive, robust feedback-loop flight control model that is applicable to various classes of UAVs and unsteady flight-path scenarios. The control design presented in this paper extends previous research results by demonstrating asymptotic (zero steady-state error) altitude regulation …

Application Of Bioinstrumentation In Developing A Pressure Suit For Suborbital Flight, Pedro Llanos, Erik Seedhouse

Publications

This presentation features Embry-Riddle Aeronautical University's U-2 pressure suit. Built to be light and cost-effective, this suit is comfortable, comes in multiple sizes, operates in pressures up to 5 PSID, has an active airflow-based cooling system, and features bio-instrumentation to measure heart rate, breathing rate, skin temperature and other vitals.

2015-2016 Eraudb Aiaa Design/Build/Fly Technical Report, Trevor W. Perrott

Student Works

The economic potential of small unmanned aerial vehicles (SUAVs) has been well documented and reported. According to the Association for Unmanned Vehicle Systems International (AUVSI), there is an associated economic impact from the growth of the UAV industry. The goal of the American Institute of Aeronautics and Astronautics Design/Build/Fly Competition Research Program (AIAA DBF CRP) is to investigate design and manufacturing methods for application to SUAVs within the scope of the AIAA DBF Competition.

Students were engaged in the application of aerospace engineering knowledge for the production of a dual-aircraft system. Through the use of Computational Fluid Dynamics (CFD), Computer …

Position Paper: Safety Culture: Why The Faa Should Consider Adapting The Wings Pilot Proficiency Program As A Method Of Remote Pilot Recertification, Ryan J. Wallace

International Journal of Aviation, Aeronautics, and Aerospace

The FAA’s release of 14 CFR 107 establishes a new Remote Pilot certification for operation of small unmanned aircraft system (UAS) platforms. Remote Pilot privileges are valid for two years, during which the operator must complete a recurrent aeronautical knowledge test covering the seven topical areas of knowledge identified by 14 CFR 107.73(b). While the existing recertification methods allow for validation of remote pilot knowledge, they fail to engage this new group of aviators in establishing positive safety culture. The author proposes the Federal Aviation Administration (FAA) adapt the existing framework for the WINGS Pilot Proficiency Program to offer regular …

Detecting Delamination In Carbon Fiber Composites Using Piezoresistive Nanocomposites, Sandeep Chava

Doctoral Dissertations and Master's Theses

Carbon fiber prepreg composites are utilized successfully as structural materials for different lightweight aerospace applications. Delamination is a critical failure mode in these composite materials. As composite plies separate from each other, the composite loses some of its ability for supporting expected loads. Therefore, detection of delamination at right time is a foremost significance. This study presents a new way for detecting delamination in composite plates using piezoresistive nanocomposites. This new procedure is setup and studied through both experimental and computational investigations. In this research, nanocomposites with 5% coarse graphene platelets are fabricated for detecting delamination. 8-ply carbon fiber prepreg …

Vision-Aided Navigation For Autonomous Vehicles Using Tracked Feature Points, Ahmed Saber Soliman Sayem

Doctoral Dissertations and Master's Theses

This thesis discusses the evaluation, implementation, and testing of several navigation algorithms and feature extraction algorithms using an inertial measurement unit (IMU) and an image capture device (camera) mounted on a ground robot and a quadrotor UAV. The vision-aided navigation algorithms are implemented on data-collected from sensors on an unmanned ground vehicle and a quadrotor, and the results are validated by comparison with GPS data. The thesis investigates sensor fusion techniques for integrating measured IMU data with information extracted from image processing algorithms in order to provide accurate vehicle state estimation. This image-based information takes the forms of features, such …

Enthalpy-Based System-Model For Pumped Two-Phase Cooling Systems, Leitao Chen, Fanghao Yang, Pritish R. Parida, Mark Schultz, Timothy Chainer

Publications

The development of embedded chip cooling for 2D and 3D integrated circuits using pumped dielectric refrigerant has gained recent attention due to the ability to manage high heat densities and compatibility with electronics. Recent studies have focused on in-situ thermal and hydrodynamic phenomena (e.g. boiling and bubble dynamics) of two-phase flow boiling at micro-scales. In this paper we focus on the two-phase cooling system design including the cooling capability, size and coefficient of performance (COP). In implementing a two-phase cooling, a system-level computational model for two-phase cooling systems becomes necessary. Therefore, a computationally manageable and accurate one dimensional (1D) system …