Engineering Commons^™

Stick Built Vs. Panelize Wall/Truss Framing For New Home Construction: A Time Study Labor Comparison., Eric A. Holt, Jim Anzlovar, Alexander Welsh

The Professional Constructor

Due to many trends in the construction industry (material cost increase, labor shortages, supply chain issues, pandemic, market demand outpacing supply), the homebuilding industry is looking for alternative ways to frame homes. In response to the National Housing Endowment (NHE) Request for Proposal, the researchers reviewed the literature on the housing market’s current state regarding the scale and scope of the skilled construction framers shortage and the current market share of single-family framing method; stick-built vs. panelization. Working with industry part ners, the team analyzed time studies for multiple new home builds. It was found that panelized wall framing systems …

Minority And Female Participation In Construction Industry Apprenticeship Programs, Richard Bruce, Aaron Sauer, Patrick Sells, Curtis Bradford

The Professional Constructor

According to the U.S. Bureau of Labor Statistic’s Current Population Survey, nearly 90 percent of the 10.7 million people employed in the construction industry are white males (2021). This statistic will remain unchanged unless more minorities and females are recruited into the industry. For craft workers, a primary recruitment mechanism is the registered apprenticeship program. This study analyzes the U.S. Department of Labor’s Registered Apprenticeship Database (RAPIDs) from 2000 to 2019 to identify trends for new apprentices. The study found that there was no change in the proportion of new female apprentices in the previous 20 years and no change …

Evaluation Of In-Cab Air Quality For Nonroad Diesel Construction Equipment, Phil Lewis, Sherif El Khouly, Adam Mayer, Jeremy Johnson

The Professional Constructor

Previous research indicates that air quality near the cabs of nonroad diesel equipment may exceed recommended exposure limits for certain pollutants. The objective of this case study was to collect and analyze air pollutant data near the cabs of nonroad diesel equipment while performing real world activities. Using state-of-the-art instrumentation, the research team conducted 24 tests on nine different items of nonroad equipment. The team collected data related to pollutant concentrations of carbon monoxide, carbon dioxide, nitric oxide, nitrogen dioxide, particulate matter, and black carbon. Average concentrations of carbon monoxide and nitric oxide did not exceed published exposure limits on …

Multistage Stochastic Programming: Algorithms, Modelling And Applications, Murwan Siddig

All Dissertations

This dissertation comprises four di˙erent topics related to multistage stochastic program-ming (MSP) algorithms, modeling, and applications.

First, we extend the adaptive partition-based approach for solving two-stage stochastic programs with a fixed recourse matrix and a fixed cost vector to the MSP setting, where the stochastic process is assumed to be stage-wise independent. The proposed algorithms integrate the adaptive partition-based strategy with a popular approach for solving multistage stochastic programs, the stochastic dual dynamic programming (SDDP) algorithm, according to two main strategies. These two strategies are distinct from each other in the manner by which they refine the partitions during the …

Quantification Of Compound And Cascading Hydroclimatic Extreme Events, Sourav Mukherjee

All Dissertations

Compound and cascading hydroclimatic extreme events have garnered much attention in recent studies. The combined effects of interconnected extremes can cause widespread damage, with a higher potential impact than individual extremes. Both anthropogenic warming and natural climate variability affect these extremes, which is why detecting past extreme events, understanding the underlying mechanisms, and assessing their future impacts can aid in mitigation efforts to reduce their overall impact. However, thus far, identifying such events is oversimplified and the propagation of their impact as cascades from the physical to human systems remains partly explored.

The overreaching goal of this thesis is to …

A Manufacturing-To-Response Pathway For Formed Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Theses

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …

Viscoelastic Model To Capture Residual Stresses In Heat Cured Dissimilar Adhesive Bonded Joints, Akshat Agha, Fadi Abu-Farha

Publications

The thermal loading during the curing process of an adhesive-bonded joint induces residual stresses in the joint, thereby affecting its performance. The problem becomes worse in the case of a multi-material joint involving varying coefficients of thermal expansion (CTE) for different parts. A novel approach was developed to model the properties of automotive grade structural adhesives during the heat curing process. The material model was divided into two components: curing kinetics model and viscoelastic mechanical model. The models were calibrated using experimental data from Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA) tests performed on an epoxy-based single-component adhesive. …

6th Aawe Workshop Program - Conference Proceedings, Nigel Kaye

American Association for Wind Engineering (AAWE) Workshop

The Glenn Department of Civil Engineering at Clemson University is hosting the 6th AAWE Workshop with a focus on student and early career presentations. The workshop will include several keynote addresses and panel discussions on non-academic wind engineering careers and future directions for wind engineering research.

Stand-Alone Direct Current Power Network Based On Photovoltaics And Lithium-Ion Batteries For Reverse Osmosis Desalination Plant, Vishwas Powar, Rajendra Singh

Publications

Plummeting reserves and increasing demand of freshwater resources have culminated into a global water crisis. Desalination is a potential solution to mitigate the freshwater shortage. However, the process of desalination is expensive and energy-intensive. Due to the water-energy-climate nexus, there is an urgent need to provide sustainable low-cost electrical power for desalination that has the lowest impact on climate and related ecosystem challenges. For a large-scale reverse osmosis desalination plant, we have proposed the design and analysis of a photovoltaics and battery-based stand-alone direct current power network. The design methodology focusses on appropriate sizing, optimum tilt and temperature compensation techniques …

Nonlinearity In Piezotransistive Iii-Nitride Resonant Microcantilevers, Ferhat Bayram

All Dissertations

Microcantilevers are an important form of microelectromechanical systems (MEMS) and have been widely used in notable applications including bio sensing, chemical detection, and imaging. Traditionally, laser based optical read-out systems have been used to measure amplitudes of the microcantilever tip oscillations (i.e. in an atomic force microscope (AFM)). However, this technique has several drawbacks including high power requirements and bulkiness that prevent commercializing of microcantilevers based miniaturized sensors. Monitoring oscillations of a cantilever array then also becomes immensely challenging. To overcome these problems, microcantilevers with integrated piezoresistive and piezotransistive deflection transducers have been developed. Because of issues related to piezoresistive …

The Professional Constructor, Full Issue, Volume 46, Number 01

The Professional Constructor

No abstract provided.

Hemodynamic Response To Device Titration In The Shunted Single Ventricle Circulation - A Patient Cohort Modeling Study, Chet Villa, Farha Zafar, Angela Lorts, Ethan Kung

Publications

Clinical outcomes of ventricular assist device (VAD) support for shunted single ventricle patients trail the larger population due in part to the challenges in optimizing VAD support and balancing systemic and pulmonary circulations. We sought to understand the response to VAD titration in the shunted circulation using a lumped-parameter network modeling six patient-specific clinical cases. Hemodynamic data from six patients (mean body surface area = 0.30 m²) with a systemic-to-pulmonary shunt was used to construct simulated cases of heart failure and hemodynamic response to increasing VAD flow from 5 to 10 L/min/m². With increasing VAD flow, …

How New, Innovative Technology Can Be Implemented To Combat The Construction Industry Labor Shortage, Noah David Jackson

The Professional Constructor

This essay addresses the construction industry’s need to compensate for the current and projected labor shortage through innovative technologies. In the first portion of this essay, three technologies that are most feasible for implementation – the Internet of Things (IoT), Drones, and Prefabrication – are detailed. The challenges faced are then discussed before the second major portion in which steps for implementation are outlined. These steps include forming partnerships, learning the process, communicating, training, implementing, and adapting and improving. The essay concludes with a discussion of how the AGC organization, and members within, can aid the industry in meeting this …

The Adaptative Construction Industry, Rhett Cox

The Professional Constructor

The construction industry is an industry that always unites to find ways to solve problems. It is very complex and requires considerable organization, hard work, specific skills, and a whole lot of determination. In this paper, I will discuss three ways that the industry is making strides to make construction better and more efficient: (a) increased use of modular construction and prefabrication, (b) use of drones, and (c) Building Information Modeling (BIM) use. With the construction process becoming more and more complex, improving efficiency and safety has gained more attraction, especially when coping with fundamental issues such as labor shortage, …

How New, Innovative Technology And Project Execution Tools And Techniques Can Be Used To Improve The Construction Process (Including Safety And Efficiency), James L. Craig

The Professional Constructor

Humanity has often sought to utilize tools and technology to make working faster, more efficient, more comfortable, and more accurate. While humans may have started with stone tools, we have since developed complex and sophisticated mechanical and digital technologies. The construction industry has been utilizing construction technology and equipment for these same reasons for generations. While other industries have embraced the use of smart, autonomous technology and robotics, the construction industry has steadily fallen behind in this effort. In this paper, I will discuss current work using these tools and possible applications for future development.

The Impact Of Climate Change On Building Energy Demands And Mitigation Measures In Florida, Aiyin (Erin) Jiang

The Professional Constructor

Tropical and subtropical parts of the world are projected to be the most vulnerable to the impact of climate change on building energy consumption demand. Few studies, however, focus on all four greenhouse emission scenarios defined by International Panel of Climate Change, which would be useful in assessing the energy demand challenges areas such as Florida. This study applies the most recognized climate change model downscaling approach, the morphing method, to investigate the impact of climate change on the commonly used commercial buildings in Florida’s climate zones under all four emission scenarios. It also analyzes the efficacy of various mitigation …

Frequency And Magnitude Of Cost Growth In Public Works Contracts, George Fulton, Panagiotis Mitropoulos

The Professional Constructor

Cost overruns are a persistent issue in the construction industry. This paper investigates factors that may drive cost growth on public works contracts. The study collected data on 1,043 public works projects completed over a three year period. The analysis examined the impact of four factors on cost overruns: (1) Project type, (2) Contract size, (3) Contract duration, and (4) Construction placement (value per day). The data were analyzed using a combination of basic descriptive statistics along with statistical hypothesis testing of means for various factors affecting cost growth. Cost growth was found to vary significantly by project type, contract …

Case Study Of Real-World Emissions Rates Verus Epaemission Standards For Motor Graders, Boshra Karimi, Phil Lewis

The Professional Constructor

Using the Volkswagen emissions scandal as motivation, the purpose of this case study was to investigate whether or not heavy-duty diesel construction equipment exceeds EPA emissions standards for nonroad diesel engines. The equipment analyzed included four separate motor graders with EPA emissions standards Tier 0, Tier 1, Tier 2, and Tier 3 engines. The analysis was based on a dataset of real-world emissions rates collected from in-use equipment on actual jobsites. The results showed that mass per time emissions rates for hydrocarbons, carbon monoxide, nitrogen oxides, and particulate matter decreased as the EPA emissions standards became more stringent. Furthermore, there …

Understanding Sub-Contractor Selection Factors In Thebuilding Construction Industry For The Southeastern United States, Dhaval Gajjar, Cayla Anderson

The Professional Constructor

The primary entities within building construction industry consists of the owner, the architect / engineer, and the general contractor, that ensure the success of any construction project. On a traditional project, the owner selects and contracts with the general contractor to construct a building designed by the architect. A considerable amount of research has been conducted to understand the owner’s selection factors to hire a qualified general contractor. However, the general contractor selected for the project seldom self-performs the entire construction of a building. The general contractor might self-perform some aspects of the actual building construction, but they will typically …

Investigating The Impacts Of Crash Prediction Models On Quantifying Safety Effectiveness Of Adaptive Signal Control Systems, Weimin Jin, Mashrur Chowdhury, Sakib Mahmud Khan, Patrick Gerard

Publications

Introduction: Adaptive Signal Control System (ASCS) can improve both operational and safety benefits at signalized corridors. Methods: This paper develops a series of models accounting for model forms and possible predictors and implements these models in Empirical Bayes (EB) and Fully Bayesian (FB) frameworks for ASCS safety evaluation studies. Different models are validated in terms of the ability to reduce the potential bias and variance of prediction and improve the safety effectiveness estimation accuracy using real-world crash data from non-ASCS sites. This paper then develops the safety effectiveness of ASCS at six different corridors with a total of 65 signalized …

Adaptive Signal System Safety Impacts Final Report, Mashrur Chowdhury, Weiman Jin, M. Sabbir Salek, Sakib Mahmud Khan, Katherine Brunk, Patrick Gerard, Nathan Huynh, Mohammad Torkjazi

Publications

The research team conducted a literature review and a nation-wide survey at the beginning of the research. The literature review revealed that Adaptive Signal Control System (ASCS) was effective in reducing crashes in some studies, while in other studies, the crash reduction due to ASCS was not statistically significant. Twenty-eight states participated in the nation-wide survey and helped the research team identify corridor characteristics, such as the design speed and Annual Average Daily Traffic (AADT) of an ASCS corridor, which would allow for the best operational and safety outcomes. Then, to determine the safety effects of ASCS, the research team …

Design, Development And Temporal Evaluation Of An Mri-Compatible In-Vitro Circulation Model Using A Compliant Aaa Phantom, Mirunalini Thirugnanasambandam, Tejas Canchi, Senol Piskin, Christof Karmonik, Ethan Kung, Prahlad Menon, Stephanie Avril, Ender A. Finol

Publications

Biomechanical characterization of abdominal aortic aneurysms (AAA) has become commonplace in rupture risk assessment studies. However, its translation to the clinic has been greatly limited due to the complexity associated with its tools and their implementation. The unattainability of patient-specific tissue properties leads to the use of generalized population-averaged material models in finite element analyses, which adds a degree of uncertainty to the wall mechanics quantification. In addition, computational fluid dynamics modeling of AAA typically lacks the patient-specific inflow and outflow boundary conditions that should be obtained by non-standard of care clinical imaging. An alternative approach for analyzing AAA flow …

Experimental Methods To Capture Curing Induced Effects In Adhesive Bonded Joints, Akshat Agha, Fadi Abu-Farha

Publications

The rapidly increasing use of structural adhesives, especially in the joining of automotive body structures has motivated various investigations of the effects of adhesive curing process on joints. The automotive-grade structural adhesives require heat curing, which, in the meantime, performs thermal loading on the substrates and causes undesirable effects in the joint. For example, the curing process results in complex residual stresses in the adhesive bond which are detrimental to the performance of the adhesive bond and thereby the automobile body structure, particularly the crashworthiness. To thoroughly evaluate such effects, this paper consists of two parts. The first part presents …

Investigating The Presence Of Culture In Engineering Design: A Case Study On Culture In Design Methods, Perception, And Outcomes, Malena Ataa Durowaah Agyemang

All Dissertations

Overwhelming global statistics on economic, social, and health disparities has driven engineers and designers to develop solutions to minimize these disparities [1,2,11,12,3–10]. For the scope of this study, these efforts are referred to as design for humanitarian engineering and global development (HEGD). HEGD solutions are designed to improve access to medical technologies, energy, clean water, and even spark economic development [1–10]. However, many HEGD solutions go unadopted, halting their intended benefits [9,13,22,23,14–21]. Efforts to improve HEGD adoption have focused on ways to incorporate culture in the design solution’s aesthetics or in approaches post-deployment [24,25,34,35,26–33]. However, a review of failed HEGD …

A Comparison Of Methods To Measure Crop Water Use In South Carolina, Andrew C. Ewing

All Theses

The objective of this thesis was to compare cost-effective methods of measuring crop water use, known as evapotranspiration (ET), in South Carolina’s humid climate. The methods analyzed were the surface renewal method (SR), the Eddy Covariance method (EC), large in-field weighing lysimeters, a newly developed pressure differential device (PDD), a Class A Evaporation pan, and the Penman-Monteith equation. In the first chapter, ET measurements obtained by SR were compared to ET measured by EC and weighing lysimeters. For reference, EC and SR track the energy budget to estimate ET, while the weighing lysimeters used in this study are box-like containers …

Development And Application Of Sustainable Binders Comprising Of Fly Ash And Ground Glass Fibers In Portland Cement And Geopolymer Concrete, Omar Alsanusi Amer

All Dissertations

Since cement production is responsible for a significant share of anthropogenic CO2 emissions, the sustainability of concrete construction has become one of the most targeted research and construction industry goals. Many suggestions have been in use to encourage sustainability of concrete construction; one such approach is to partially replace cement by industrial byproducts. The most known industrial byproduct used in concrete construction worldwide has been fly ash, which is a byproduct of burning coal for power generation.

Fly ash use in concrete has various benefits. It reduces the water demand, reduces plastic shrinkage, reduces permeability, and thus improving the durability …

The Professional Constructor, Full Issue, Volume 45, Number 02

The Professional Constructor

No abstract provided.

A Probabilistic Casualty Model To Include Injury Severity Levels In Seismic Risk Assessment, Weichiang Pang, S. Majdalaweyh, A. Safiey, K. Rokneddin, S. Prabhu, M. Javanbarg, E. Ziaei

Publications

Despite the increasing adoption of Performance-Based Earthquake Engineering (PBEE) in seismic risk assessment and design of buildings, earthquakes resulted in around 1.8 million injuries (three times the number of fatalities) over the past two decades. Several existing PBEE-based methodologies use rudimentary models that may not accurately estimate earthquake-induced casualties. Even when models are suitable for predicting the total number of fatalities and critical injuries, they may fail to adequately differentiate between different levels of injury severity. This paper draws attention to the importance of extending the seismic casualty assessment method by broadening the perspective on injury severity. To this cause, …

Photovoltaics- And Battery-Based Power Network As Sustainable Source Of Electric Power, Prahaladh Paniyil, Vishwas Powar, Rajendra Singh, Benjamin Hennigan, Pamela Lule, Matthew Allison, John Kimsey, Anthony Carambia, Dhruval Patel, Daniel Carrillo, Zachary Shriber, Truman Bazer, James Farnum, Kushal Jadhav, Dalton Pumputis

Publications

With the rise in the utilization of free fuel energy sources, namely solar and wind, across the globe, it has become necessary to study and implement models of a sustainable power network. This paper focuses on the design of a conceptual power network based on photovoltaics (PV) for power generation and lithium-ion batteries for storage. The power system showcases the various metrics that are involved in a grid-tied PV- and battery-based power network. It also encompasses the various design parameters and sizing considerations to design and conceptualize such a power network. The model focuses on the importance of the conservation …

Investigating Hierarchical Effects Of Adaptive Signal Control System On Crash Severity Using Random-Parameter Ordered Regression Models Incorporating Observed Heterogeneity, Weimin Jin, Mashrur Chowdhury, M. Sabbir Salek, Sakib Mahmud Khan, Patrick Gerard

Publications

No abstract provided.