Engineering Commons^™

The Effect Of Asphalt Emulsion On The Properties Of Fly Ash Based Geopolymers, Natcha Prommityat, Chiravoot Pechyen, Pitak Laoratanakul, Benya Cherdhirunkorn

Journal of Metals, Materials and Minerals

This research aimed to study the effect of asphalt emulsion (AE) on the properties of fly ash based geopolymers. Solid waste materials used for the production of geopolymer were coal fly ash (FA) 70 wt% and bagasse ash (BA) 30 wt%. Alkaline solution used for the geopolymerization reaction was the mixture of 10 M NaOH and Na2Sio3

with the ratio of 1:2. The liquid and solid (L/S) ratios of 0.6, 0.7 and 0.8 were prepared. The AE of 1 wt%, 3 wt% and 5 wt% were added into the raw materials mixtures. Then, the mixed slurry was casted into a …

High-Binding Affinity Nanobody Against Sars-Cov-2 Xbb.1.5: Computational-Based Protein Engineering, Phoomintara Longsompurana, Napat Kongtaworn, Rungtiva P. Poo-Arporn, Thanyada Rungrotmongkol

Journal of Metals, Materials and Minerals

The emergence of the SARS-CoV-2 variant XBB.1.5 has triggered a global health crisis by enhancing viral entry into cells via its spike protein. This study addresses the urgent need to develop neutralizing nanobodies (Nbs) to counteract the SARS-CoV-2 virus. Our aim was to identify a lead Nb and enhance its binding affinity to the receptor-binding motif (RBM) on the receptor-binding domain (RBD) of the SARS-CoV-2 spike protein (S-protein) using computational methods. A total of 29 Nbs were screened against the XBB.1.5 RBD using the HDOCK server to select a lead Nb. This investigation revealed that Nb_7KGK exhibited the highest binding …

Tin Oxide Nanoparticle Extraction From Waste Solder Dross Via Low-Temperature Hydrometallurgical Process, Tanongsak Yingnakorn, Sirunya Somla, Thanapon Chandakhiaw, Ethan Cheung, Sakhob Khumkoa

Journal of Metals, Materials and Minerals

This study proposes a hydrometallurgical approach to valorising industrial waste by producing SnO2 nanoparticles (NPs) from waste solder dross obtained by skimming off of tin solder baths from electronic dipping processes. The process involves leaching the dross with aqueous hydrochloric acid solution and hydrogen peroxide, followed by precipitation with ammonium hydroxide and purification with aqueous nitric acid solution. The optimised leaching conditions were determined to be 4 mol∙ L‒1 HCl, 11% v/v H2O2, 25℃, and a leaching time of 15 min. SnO2 NPs were successfully precipitated at pH 4 using 25% v/v NH4OH and purified with 1 mol∙ L‒1 HNO3. …

Investigation Of Pressure And Temperature Distributions In Aerofoils Using Cfd Simulation, Ramesh Krishnan L., Jasgurpreet Singh Chohan, S. Vijayakumar, N. Beemkumar, Sriram Desikan, V. Nagabhushana Rao, M.Naga Swapna Sri, Mayank Kundlas

Journal of Metals, Materials and Minerals

Most aircraft derive the design of their wings, fins, and horizontal stabilizers from this construction approach, incorporating curved surfaces to enhance the lift-to-drag ratio during flight. Over the past decade, Computational Fluid Dynamics (CFD) has become the leading tool for designing components and processes involving fluid or gas movement across industries such as aviation, automotive, and manufacturing. This study examines the aerodynamic characteristics—including pressure, density, and temperature distribution, as well as lift and drag forces—of two different angles of attack based on the M13 and Eppler 1233 airfoils. The analysis considers an airfoil with varying chord thickness while maintaining a …

Electrochemical Study Of Zn-Fe Alloy Coatings On Mild Steel For Automotive Applications, Ramesh Bhat, A. Chitharanjan Hegde

Journal of Metals, Materials and Minerals

This study investigates the electrochemical behavior of Zn-Fe alloy deposited on mild steel (MS) substrates for automotive applications. The electrodeposition of a Zn-Fe alloy onto MS using an acid chloride bath, with 1,2,4-Triazole as an additive to enhance the uniformity of the deposit. The hull cell method was used to optimize the bath composition and operating conditions. The coatings were produced using electrodeposition at varying current densities, with 3 A∙dm‒2 identified as the optimal current density (CD) for achieving uniform coatings. The microstructural properties, including crystallite size and micro-strain, were analyzed using X-ray diffraction (XRD) and Williamson-Hall (W-H) analysis, revealing …

Influence Of The Casting Processes And Aging Times On The Microstructure And Hardness Of Alsi12 Cu Cast Alloys, Said Beroual, Pascal Paillard, Yann Borjon-Piron

Journal of Metals, Materials and Minerals

The present study investigated the effects of the casting processes and aging times on the micro-structure and hardness of commercial AlSi12Cu alloys. The primary goal was to assess how various aging times affect the maximum hardness of the alloy and to evaluate the influence of cooling rates on hardness values obtained from sand casting (SC) and High-pressure die casting (HPDC). For both casting alloys, the solution heat treatment was performed at 540℃, followed by quenching. The alloys were then aged at 180℃ for various durations, ranging from 10 min to 50 h. The results reveal significant microstructural changes in the …

Photocatalytic Behaviour Of (Biybo3)0.5-(Batio3)0.5, Yasaswi Priyadarshini Samal, Subhalaxmi Patra, Tapan Das, Minakshi Padhy

Journal of Metals, Materials and Minerals

Different organic compounds like dyes and pharmaceutical contaminants pollute a large amount of water which can increase the chemical oxygen demand in water bodies. The photodegradation of dyes has been widely studied using TiO2-based nanomaterials, which are typical photocatalysts. TiO2 is highly effective in reducing pollutants when exposed to UV light and does not cause secondary pollution. However, TiO2 is only functional when exposed to UV light, which is not ideal for real-world use. This drawback of TiO2 pulls the research towards modified photocatalysts for better yield. In this study, the (BiYbO3)0.5 - (BaTiO3)0.5 material was formulated by solid state …

Synergistic Effects Of Co-Ni Nanoalloys On Sio2@Tio2: A Novel Approach To Photocatalytic Tetracycline Degradation, Pratyush Kumar Sahu, Alaka Rath, Aslisha Champati, Ashish Madual, Pravat Manjari Mishra, Abanti Pradhan, Brundabana Naik

Journal of Metals, Materials and Minerals

To develop a cost-effective alternative to noble metal catalysts for photocatalysis, we synthesized a series of bimetallic Co-Ni nanoalloys on core-shelled SiO2@TiO2 nanostructures via a chemical reduction approach. The research demonstrates the photocatalytic behaviour of the Co-Ni alloy-enhanced SiO2@TiO2 (ST-Co, Ni) hybrid nanocatalyst, focusing on its crystalline structures, morphological shapes, chemical conditions, and optical properties, utilizing techniques such as X-ray diffraction, field emission scanning electron microscopy, UV-visible diffuse reflectance spectroscopy, photoluminescence spectroscopy, transmission electron microscope, and electrochemical analysis. The catalyst was evaluated for its effectiveness in degrading tetracycline, an overused antibiotic that persists in aquatic environments and is known for …

Studies Of Structural, Microstructural, Dielectric, And Electrical Characterization Of Binaznmoo6 Double Perovskite, Swati Panda, Supriya Barik, Ritu Purna Sahu, Adwit Prasad Sahu, S. Mishra, S. K. Parida

Journal of Metals, Materials and Minerals

This study investigates the structural, microstructural, dielectric, and electrical properties of BiNaZnMoO₆ (BNZM) ceramic synthesized using a conventional solid-state reaction method. Preliminary structural analysis using X-ray diffraction (XRD) suggests orthorhombic crystal symmetry. Scanning electron microscopy (SEM) micrographs reveal a uniform distribution of well-grown grains with well-defined grain boundaries, which may contribute to the enhanced dielectric properties. Energy dispersive X-ray spectroscopy (EDX) analysis confirms the presence of all constituent elements Bi, Na, Zn, Mo, and O in the studied sample. Dielectric spectra analysis as a function of frequency and temperature indicates the formation of high-quality dielectric materials, evidenced by a high …

Graphitic Carbon Nitride Loaded Bi4o5i2 For Elevated Photocatalytic Tetracycline Degradation, Subhasish Mishra, Barsha Marandi, Kali Sanjay, Rashmi Acharya

Journal of Metals, Materials and Minerals

As a robust photocatalyst, Bi4O5I2 have has attracted significant scientific interest owing to its narrow bandgap energy, escalated electronic properties and high stability. Nonetheless, the unfavourable band structure and higher recombination of excitons have restricted its diversified photocatalytic applications. In this context, binary heterojunction construction using Bi4O5I2 could be considered an effective strategy for spatial charge carrier separation across the hetero-interface, leading to an enhanced activity. In this study, we have prepared Bi4O5I2/g-C3N4 Z-scheme hetero-structures via a wet impregnation strategy that preserves the spherical structure of Bi4O5I2. The phase purity, chemical bonding, morphology and microstructure of the composite were confirmed …

Photodegradation Of Malachite Green Using 2d G-C3n5 Nanosheet: A Promising Metal Free Catalyst, Sonali Biswal, Swayam Aryam Behera, Asima Subhadarshini, P. Ganga Raju Achary, Binita Nanda

Journal of Metals, Materials and Minerals

Environmental issues have become more serious these days due to the growth of modern industries. The paper and textile industries, in particular, were heavily dependent on the printing and discharge of dye, which constantly leaked into the water ecology and constituted a serious risk to public health. Organic wastewater treatment and remediation for its associated risks have received a lot of attention lately. This work explored the potential of the g-C3N5 nanostructure as a novel photocatalyst for malachite green degradation in aqueous solution while exposed to visible light. The nanocomposite was fabricated through an ultrasonicate-assisted technique. A number of analysis …

Antibacterial, Self-Adhesive Guar Gum/Polyvinyl Alcohol/Tannic Acid Conductive Hydrogels For Flexible Strain Sensors, Noppanan Putdon, Somnuk Theerakulpistut, Rawit Jittham, Pornnapa Kasemsiri

Journal of Metals, Materials and Minerals

In this research, a multifunctional strain sensor with antibacterial properties and self-adhesion capabilities was developed using guar gum (GG), polyvinyl alcohol (PVA), and tannic acid (TA). The incorporation of TA into GG-PVA hydrogel-based strain sensors was investigated to evaluate its effects on mechanical and electrical properties, self-adhesion, and antibacterial activities. The anti-bacterial activities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were enhanced with the increasing content of TA. The adhesive strength was observed in the range of 1.20 ± 0.10 kPa to 5.05 ± 0.23 kPa, and the values tended to increase as TA content increased. The …

Mechanochemical Synthesis Of Ni(Ii)-Tptz Complexes With Co-Ligands: Spectroscopy, Dft, And Biological Studies, Deepak Senapati, Anulipsa Priyadarshini, Debadutta Samal, P. Ramesh Babu, Satyanarayan Sahoo, Narayan Chandra Bera, Raghabendra Samantaray, Jagannath Panda, Rojalin Sahu

Journal of Metals, Materials and Minerals

New mixed-ligand Ni(II) complexes [Ni(tptz)(1,10-phen)] (1), [Ni(tptz)(2-Mimd)2] (2), and [Ni(tptz)Imd)2] (3) were synthesized via a green, solvent-free mechanochemical approach using ball milling. The primary ligand used was 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz), with secondary ligands being 1,10-phenanthroline, 2-methyl imidazole, and imidazole, respectively. Structural characterization by IR, UV-Visible, photoluminescence spectroscopy, and powder X-ray diffraction, supported by DFT calculations, revealed a distorted square planar geometry for complex 1 and distorted tetrahedral geometries for complex-2 and complex-3. Notably, bathochromic shifts in the UV-Vis spectra confirm metal-ligand charge transfer transitions and extended π-delocalization. Powder XRD analysis determined average crystallite sizes of 17.86 nm (1), 25 nm (2), …

Regulating Copx/Co Heterostructures For Enhanced Electrocatalytic Activity Toward Hydrazine Oxidation Reaction, Qinquan Lin, Rui Zhang, Changli Yan, Qizhao Hu, Shangbin Sang, Qiumei Wu, Kaiyu Liu, Hongtao Liu

Journal of Metals, Materials and Minerals

Hydrazine hydrate (N2H4∙H2O) is considered an ideal fuel for fuel cells. Constructing a cobalt phosphide/cobalt (CoPx/Co) heterostructure can achieve efficient electrocatalytic activity for hydrazine oxidation reaction. Traditional strategies for constructing CoPx/Co heterostructures took less consideration on the exposure of the active sites. In this study, 3D nanoflower-like nano CoPx/Co heterostructures with highly exposed active sites were obtained on a nickel foam (NF) through a dual-component phosphating strategy, i.e., regulating the relative content of Co and Co(OH)2 with cathodic current density and utilizing the differences in their phosphating behaviors. The potential at 100 mA∙cm‒2 and Tafel slope of the optimized CoPx/Co(375)@NF …

Oxidation Of Sn-1 Wt.% Bi In Air And In Oxygen Deprived Environment, Pakawat Polmanee, Benjie Fernandez, Patama Visuttipitukul, Ittipon Cheowanish, Tachai Luangvaranunt

Journal of Metals, Materials and Minerals

Oxidation of Sn-1wt% Bi in air and in oxygen deprived environment is studied in this research. Electrochemical process with SERA technique was used to determine oxide film thickness and rate of oxidation of tin alloy. The thickness of oxide film at 72 hours of the specimens that is tested in air, in vacuum, in argon environment, and wrapped with plastic film are 16, 10, 18, and 13 Å respectively. XPS was used to determine the type of oxides in the oxide layer. Result after signals deconvolution shows that SnO and SnO2 compounds were formed on the Sn-1wt% Bi surface.

Solar Radiation Assisted Photocatalytic Degradation Of Congo Red Using Ce Doped Lacoo3, Rishabh Kamal, Rasmirekha Pattanaik, Debapriya Pradhan, Suresh Kumar Dash

Journal of Metals, Materials and Minerals

A viable sol-gel synthesis technique was used to synthesize LaCoO3 and Ce doped LaCoO3 for degradation of congo red dye taking a renewable source of light i.e solar radiation. The crystalline structure, morphology, and optical properties of the synthesized catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) analysis of Ce-doped LaCoO₃ confirmed the presence of La (3d), Ce (3d), Co (2p), C (1s), and O (1s) and their valence states in the perovskite matrix, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and ultraviolet diffuse reflectance spectroscopy (UV-DRS). The XRD analysis with a prominent diffraction peak detected …

Facile Synthesis Of Bamno3-Zro2 Composite: A Step Towards The Photocatalytic Degradation Of Organic Dye, Kirttimayee Mohanta, Swayam Aryam Behera, Binita Nanda, P. Ganga Raju Achary

Journal of Metals, Materials and Minerals

Environmental contamination by synthetic dyes, particularly Methylene Blue (MB), presents a significant threat to aquatic ecosystems and human health due to their chemical stability and toxicity. This study investigates the photocatalytic degradation of MB using a BaMnO3:ZrO2 composite synthesized in a 1:2 ratio via a straightforward wet-chemical method. Structural and optical characterizations were performed using X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and Ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS). The composite exhibited a reduced bandgap of 2.88 eV and uniform nanoscale morphology, both favorable for visible-light-driven photocatalysis. Under visible-light irradiation, the catalyst achieved 89% degradation efficiency within …

Optimization And Characterization Of Carrageenan/Alginate Ratio And Seaweed Waste To Develop Composite Bioplastics From Kappaphycus Alvarezii, Ali Ridlo, Retno Hartati, Agus Sabdono

Journal of Metals, Materials and Minerals

Carrageenan and alginate, derived from seaweed, offer potential as alternatives to traditional plastics. This study aims to assess the properties of biodegradable bioplastics made from a composite of carrageenan, alginate, and waste from K. alvarezii seaweed carrageenan extraction. A mixture of carrageenan and alginate was added with a ratio of 4:6 and K. alvarezii extraction waste 0, 20, 40, 60, and 80 % waste concentration,  in the carrageenan-alginate-waste mixture. The process involves blending carrageenan, alginate, waste, glycerol, and distilled water until uniform at 90o C and 1000 rpm for 45 minutes, followed by molding, immersion in a 4% CaCl2 solution, …

Liquid-Liquid Extraction Of Nd(Iii) Using [P66614][Cy272] Ionic Liquid, Prasanjit Das, Kali Sanjay, Niharbala Devi

Journal of Metals, Materials and Minerals

This study explores the extraction of Nd(III) from synthetic solutions using the ionic liquid [P66614] [Cy272]. Key extraction parameters, including the effect of phase contact time, initial pH, salting-out agents, extractant concentration, and temperature, were systematically optimized. Results revealed that a phase contact time of 15 min, an initial pH of 2.14, and 0.2 mol∙L‒1 NaCl as a salting-out agent and extractant concentration of 0.015 mol∙L‒1 [P66614][Cy272], achieved maximum extraction efficiency of 99.7%. Thermodynamic analysis confirmed the process is to be exothermic, spontaneous, and entropy-driven, highlighting the strong complexation between Nd(III) and the ionic liquid [P66614][Cy272]. Stripping tests revealed that …

Green-Synthesized Yttrium-Doped Cerium Oxide Nanoparticles: A Promising Optical Material, Sasmita Sarangi, Nibedita Nayak, Binita Nanda, Tapas Sahoo

Journal of Metals, Materials and Minerals

This work focuses on the green synthesis, characterization, and optical properties of yttrium-doped cerium dioxide (CeO2) nanoparticles. A green approach was adopted using Acacia concinna fruit extract as surfactant and stabilizing agent. Their structural, morphological, and physical-chemical properties were characterized using different analytical techniques, like XRD, FE-SEM, FTIR, PL, Raman, UV-Visible Spectroscopy. XRD study validated the structure of cubic fluorite-type structure of CeO2 nanoparticles, with the average crystallite size ranging between 7-15 nm. Raman spectroscopy validated this structure with F2g band observed at 463 cm−1. FESEM images showed irregular spherical morphologies with grain sizes in the range of 50-60 nm. …

Pyrolysis And Modification Of Coconut Shell Into Sulfonated Biochar And Its Catalytic Activity On Cellobiose Conversion, Addy Rachmat, Yessi Eka Wahyu, Poedji Loekitowati Hariani, Fahma Riyanti, Fatma Fatma

Journal of Metals, Materials and Minerals

Coconut shell was successfully valorized into sulfonated biochar through carbonization in various temperatures and duration. This work aims to provide suitable solid acid carbonaceous catalyst for cellobiose conversion into valuable product. Sulfonated biochar is characterized to evaluate its crystallinity, sulfonate, and oxygenated functional groups by XRD method and FTIR spectroscopy. The resulting solid acid carbonaceous material was tested toward cellobiose hydrolysis to assess its catalytic activity in various time, temperature, and catalyst weight. FTIR spectra reveals some of the biochar product has sulfonate group as indicated by absorbance band at 1234 cm‒1, 1070 cm‒1 and 1180 cm‒1, which belongs to …

The Effects Of Graphene Nanoplatelets And Microcrystalline Cellulose On The Mechanical Properties Of Fiberglass And Carbon Fiber Composites, Duangjai Srisamut, Nathawat Poopakdee, Warut Thammawichai

Journal of Metals, Materials and Minerals

This study investigated how graphene nanoplatelets (GNP) and microcrystalline cellulose (MCC) affect the mechanical properties of epoxy (EP), carbon fiber (CF), and fiberglass (FG) composites. The tensile and flexural properties of GNP-EP and MCC-EP of  varying reinforcement concentrations were examined. Results indicated significant improvements on tensile and flexural properties by GNP and MCC. At 0.1 wt% GNP, tensile and flexural strengths increased by 10% and 21%, while 2.0 wt% improved flexural modulus by 65%. Similarly, 2.0 wt% MCC improved tensile strength, modulus, and flexural modulus by 11%, 11%, and 46%, respectively, and a 26% increase in flexural strength at 1.0 …

Evaluation Of Heavy Metal Bioaccumulation And Growth In Hemp From Chicken Manure, Vermicompost, And Wastewater Sludge With Biochar And Health Risk Assessment, Chutiphan Sangsoda

Chulalongkorn University Theses and Dissertations (Chula ETD)

Hemp (Cannabis sativa L.) has become an economically valuable crop with a wide range of benefits. To promote more sustainable agricultural systems, the use of recycled substrates has increasingly replaced traditional fertilizers. However, substrates such as dry chicken manure, vermicompost, and wastewater sludge (WWS) combined with biochar often contain heavy metal contaminants, which may pose health risks through exposure to hemp. This study investigated three cultivars Rosella, Superwoman S1, and Red Robin over a 120-day period. The objectives were: (1) to compare the effects of dry chicken manure, vermicompost, and wastewater sludge (with and without biochar) on soil nutrient quality …

Interaction Between Extreme Temperature Events And Air Pollution On Mortality In Thailand : A Nationwide Time Series Study, Phichet Khunthong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Climate change has increased the frequency and intensity of extreme temperature events (ETEs; heat and cold waves), concomitantly affecting PM2.5 fluctuation. However, limited research has investigated the interaction of ETEs and PM2.5 on mortality, particularly in tropical regions where the interaction could influence differently from cold countries. A two-stage time-series using distributed lag non-linear models was employed to estimate region-specific relative risks and 95% confidence intervals (RRs and 95% CIs) of ETEs and PM2.5 on daily cardiovascular and respiratory mortality. The relative excess risk due to interaction (RERI) was examined to quantify additive effects. Cold waves had the greatest effect …

พฤติกรรมการเปลี่ยนช่องจราจรบริเวณจุดรับส่งผู้โดยสาร, ศุภวิชญ์ มัธยมนันทน์

Chulalongkorn University Theses and Dissertations (Chula ETD)

ในสภาพการจราจรจริง การไหลของกระแสจราจรมักถูกรบกวนจากยานพาหนะที่จอดเพื่อรับ–ส่งผู้โดยสาร ส่งผลให้ยานพาหนะที่ขับขี่ตามมามีสองทางเลือก ได้แก่ การรอให้ยานพาหนะด้านหน้าเคลื่อนตัวต่อไป หรือการเปลี่ยนช่องจราจรไปยังช่องที่สามารถเคลื่อนที่ได้ ซึ่งทั้งสองทางเลือกล้วนทำให้ประสิทธิภาพการไหลของจราจรลดลงเมื่อเทียบกับกรณีที่ไม่มีการรบกวนดังกล่าว ในปัจจุบัน การใช้แบบจำลองจราจรช่วยให้สามารถทำความเข้าใจและคาดการณ์สภาพการจราจรได้โดยไม่ต้องทดลองในพื้นที่จริง แต่แบบจำลองทั่วไปยังขาดความเฉพาะเจาะจงเมื่อต้องเผชิญสถานการณ์เฉพาะทาง โดยมักใช้พฤติกรรมพื้นฐานเพียงชุดเดียวในการแทนพฤติกรรมผู้ขับขี่ทุกกรณี งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาพฤติกรรมการเปลี่ยนช่องจราจรของผู้ขับขี่เมื่อแล่นตามหลังรถที่จอดรับ–ส่งผู้โดยสาร จากนั้นนำพฤติกรรมที่ได้จากภาคสนามไปใช้ในการพัฒนาแบบจำลองสภาพจราจรใน PTV VISSIM และทำการเปรียบเทียบกับพฤติกรรมจริง ข้อมูลภาคสนามถูกเก็บรวบรวมด้วยการบันทึกวิดีโอและประมวลผลด้วย Video Analytics ก่อนนำไปสร้างแบบจำลอง ผลการศึกษาพบว่า แบบจำลองสามารถจำลองพฤติกรรมการเริ่มต้นเข้าสู่การเปลี่ยนช่องจราจรได้ใกล้เคียงกับข้อมูลจริง โดยช่องว่างเชิงเวลา (Lag Gap) ของยานพาหนะที่ขับขี่ตามมามีค่าเฉลี่ย 0.425 วินาทีในภาคสนาม และ 0.375 วินาทีในแบบจำลอง อย่างไรก็ตาม แบบจำลองยังไม่สามารถสะท้อนพฤติกรรมการเปลี่ยนช่องจราจรได้ครบถ้วนทุกด้าน ซึ่งเป็นประเด็นที่ควรได้รับการพัฒนาเพิ่มเติมในงานวิจัยอนาคต

Bibliometric And Visualisation Analysis Of Biomass Burning Research In Thailand (1997-2024), Weerachon Sawangproh, Arika Bridhikitti

Applied Environmental Research

Biomass burning is a major driver of air pollution and climate-related impacts in Thailand, but a national-level synthesis of research efforts is lacking. This study conducts a comprehensive bibliometric and qualitative review of 256 peer-reviewed publications from 1997–2024, using Scopus-indexeddata to explore research trends, thematic patterns, and existing gaps. The analysis reveals a strong emphasis on atmospheric chemistry, air quality modeling, and remote sensing, which collectively account for more than 60% of the research landscape.Studies frequently focus on pollutants such as PM2.5,PAHs, carbon monoxide, and heavy metals, with biomass burning identified as a dominant source, especiallyduring the dry season in …

Quantifying Biodiversity In The Absence Of Taxonomic Data: A Study Of Thailand’S Economic Development Zones, Nikorn Mahawan, Wanpen Charoentrakulpeeti

Applied Environmental Research

The biodiversity status measures the ecological capacity of a given area. However, biodiversity assessments in developing countries are limited by the absence of taxonomic data on plants and animals. By developing methods to evaluate biodiversity via alternative data, it is now possible to quantify the ecological carrying capacity in areas where taxonomic data are lacking. The relationship between forest ecosystem health and biodiversity values can be used to estimate biodiversity values by considering the proportions of different land use types that are associated with forest ecosystem abundance. The biodiversity value of the area can be assessed by adding the abundance …

Low-Temperature Catalytic Oxidation Of White Spirit Vapor In Air By Binary Oxides Of Feo-Mnox Supported On Oms-2 Material, Ngo Quoc Nguyen, Pham Duy Quang, Nguyen Ha Nhu, Le Thi Van Anh, Nguyen Thi Thuy, Vo Thanh Hang, Le Van Thang, Nguyen Thi Le Lien, Nguyen Trung Thanh, Nguyen Nhat Huy

Applied Environmental Research

In this work, catalysts of iron and manganese oxides supported on OMS-2 were prepared and applied to remove white spirit (WS) in air. Among the fabricated catalysts, the FeO-MnOx/OMS-2 catalyst with a surface Fe+Mn loading of 15% (Fe:Mn = 6:4) exhibited the highest catalytic performance, achieving a high WS removal efficiency of 97.91% at 200 °C. The catalyst retained the cryptomelane-type tunnel structure of OMS-2 and possessed enhanced redox activity due to the synergistic interaction between surface Fe and Mn species. The physico-chemical properties were characterized via BET, EDS, FTIR, XRD, and SEM. The suitable conditions for WS oxidation were …

Spatial And Temporal Dynamics Of Water Use Efficiency And Climate Influence In The Central Highlands Of Vietnam Via Satellite Time Series, Thi Nguyen Quang, Hoang Van Hung

Applied Environmental Research

This study investigates the spatial and temporal patterns of water use efficiency (WUE) anomalies across the Central Highlands of Vietnam from 2001–2024 via MODIS time series data, with a focus on seasonal differences and climatic drivers. The results revealed pronounced interannual and spatial variability in the WUE, with significant improvements observed during 2004, 2015, and 2021–2024 and substantial declines during 2005–2008, 2010–2013, and 2016–2017, which coincided with major drought events in the region. Seasonal analysis indicated that WUE was lower during the early dry season and peaked during the postmonsoon months (October–November), reflecting the interplay between water availability and vegetation …

Using A Water Quality Index To Assess The Impacts Of Heavy Metals Contamination For Sustainable Water Management: A Case Study Of The Bang Pakong River, Thailand, Khin Yadana Soe, Pokchat Chutivisut, Wilailuk Niyommaneerat

Applied Environmental Research

Anthropogenic activities such as improper waste disposal, excessive fertilizer use, and industrial effluents cause heavy metal contamination in water, soil, and the atmosphere. Herein, the water quality index (WQI) was used to characterize heavy metal (i.e., cadmium (Cd), arsenic (As), and mercury (Hg)) contamination in the Bang Pakong River, Thailand. Specifically, water samples were collected during the dry season from four stations along the river from 2012–2022. The heavy metal concentrations in the samples were analyzed via atomic absorption spectrophotometry, and WQI values were calculated on the basis of standard water quality parameters. At the four sampling stations, high As …