Engineering Commons^™

Variability Within Irrigated Fields, Charles M. Burt, Byron Clark

BioResource and Agricultural Engineering

In agricultural production and research, it is common to represent fields as uniform areas. For example, fertilizers, soil amendments, and other inputs have traditionally been applied uniformly (or as uniformly as possible) based on estimated needs for the field as a whole (or as an “average”).

Of course, it is also recognized that fields are not truly uniform with respect to soil characteristics, uniformity of applied water, pest pressures, fertility needs, crop growth and yield, and other characteristics. With the emergence and refinement of variable rate application technology, many growers now attempt to maximize returns by “prescribing” variable amounts of …

Composite Manufacturing Of Small Wind Turbine Blades- Utility Scale Methods Applied To Small Wind, Bryan Kyle Edwards

Master's Theses

Cal Poly, San Luis Obispo’s first wind turbine explores the methods and processes that are employed to manufacture utility scale wind turbines, and applies them to small scale wind turbines. The primary objective is to promote the development of small scale wind turbine blades in ways that resemble, as closely as possible, the construction and methods of utility scale turbine blade manufacturing. Vacuum infusion is employed to create a hollow, multi piece, lightweight design using carbon fiber and fiberglass with an epoxy based resin. A “rapid prototyping” method is developed using high density foam molds that allows short cycle time …

A Novel Approach For Analyzing Severe Crash Patterns On Multilane Highways, Anurag Pande, Mohamed Abdel-Aty

Civil and Environmental Engineering

This study presents a novel approach for analysis of patterns in severe crashes that occur on mid-block segments of multilane highways with partially limited access. A within stratum matched crash vs. non-crash classification approach is adopted towards that end. Under this approach crashes serve as units of analysis and it does not require aggregation of crash data over arterial segments of arbitrary lengths. Also, the proposed approach does not use information on non-severe crashes and hence is not affected by under-reporting of the minor crashes. Random samples of time, day of week, and location (i.e., milepost) combinations were collected for …

Feasibility Of Ellipsometric Sensor Development For Use During Pecvd Siox Coated Polymer Product Manufacturing, Daniel Lynn Helms

Master's Theses

Polymeric materials have provided pathways to products that could not be manufactured otherwise. A new technology which merges the benefits of ceramics into these polymer products has created materials ideally suited to many different industries, like food packaging. Nano Scale Surface Systems, Inc. (NS3), a company which coats polymers with ceramic oxides like SiO2 through a process known as plasma enhanced chemical vapor deposition (PECVD), was interested in the feasibility of an in line measurement system for monitoring the deposited films on various polymer products. This project examined two different coated polymer products, polyethylene terephthalate (PET) beverage containers and biaxially …

Orbital Propagators For Horizon Simulation Framework, Mitra Farahmand

Master's Theses

This thesis describes the models of four common orbital propagators and outlines the process of integrating them into the Horizon Simulation Framework (HSF). The results of the Two-Body, J2, and J4 propagators from the HSF are then compared against the outcomes of these propagators in MATLAB and Satellite Toolkit (STK). The MATLAB algorithms verify the functionality of the propagators and determine the accuracy of the HSF implementation. The compassion against STK validates the formulation of the HSF propagators. In order to equip the HSF with a more precise means of orbit determination, adding the Simplified General Perturbations 4 (SGP4) propagator …

Rayleigh Flow Of Two-Phase Nitrous Oxide As A Hybrid Rocket Nozzle Coolant, Lauren May Nelson

Master's Theses

The Mechanical Engineering Department at California Polytechnic State University in San Luis Obispo currently maintains a lab-scale hybrid rocket motor for which nitrous oxide is utilized as the oxidizer in the combustion system. Because of its availability, the same two-phase (gas and liquid) nitrous oxide that is used in the combustion system is also routed around the throat of the hybrid rocket’s converging-diverging nozzle as a coolant. While this coolant system has proven effective empirically in previous tests, the physics behind the flow of the two-phase mixture is largely unexplained. This thesis provides a method for predicting some of its …

Assessment Of Electrospinning As An In-House Fabrication Technique For Blood Vessel Mimic Cellular Scaffolding, Colby M. James

Master's Theses

Intravascular devices, such as stents, must be rigorously tested before they can be approved by the FDA. This includes bench top in vitro testing to determine biocompatibility, and animal model testing to ensure safety and efficacy. As an intermediate step, a blood vessel mimic (BVM) testing method has been developed that mimics the three dimensional structure of blood vessels using a perfusion bioreactor system, human derived endothelial cells, and a biocompatible polymer scaffold used to support growth of the blood vessel cells. The focus of this thesis was to find an in-house fabrication method capable of making cellular scaffolding for …

Investigation Of The Geotechnical Properties Of Municipal Solid Waste As A Function Of Placement Conditions, Wilson W. Wong

Master's Theses

An investigation of the variability of engineering properties of municipal solid waste as a function of placement conditions was conducted. Limited data have been reported for the engineering properties of municipal solid waste (MSW) as a function of placement conditions. Wastes have high variability of engineering properties due to heterogeneity in composition and component size; influence from time based effects; and presence of compressible solids. Control of moisture content of MSW at the time of waste placement provides opportunity for increased capacity at a given landfill site due to higher compacted unit weight as well as for control of other …

Hole-Type Aerospike Compound Nozzle Thrust Vectoring, Stanley Ikuo Beebe

Master's Theses

Compound aerospike nozzles were designed and tested as part of an ongoing

experimental study to determine the feasibility of thrust vectoring an aerospike

nozzle with the addition of a secondary port. Earlier phases of the study have

indicated that a compound aerospike nozzle could provide sufficient thrust

vectoring. The addition of a hole-type secondary port was found to provide

effective thrust vectoring.

Experiments were carried out to determine the effects of secondary port size,

secondary port inlet geometry and compound aerospike nozzle chamber

pressure. Results show good predictability, axisymmetric flow, and emphasize

the importance of a radius on secondary port …

The Interaction Between Throttling And Thrust Vectoring Of An Annular Aerospike Nozzle, David Michael Imbaratto

Master's Theses

Applied research and testing has been conducted at the Cal Poly San Luis Obispo High-pressure Blow-Down facility to study the affects of throttling in a thrust-vectored aerospike nozzle. This study supports the ongoing research at Cal Poly to effectively thrust vector a hybrid rocket motor. Such thrust vectoring is achieved by small secondary ports in the nozzle body that are perpendicular to the main nozzle. The testing conducted included characterizing and comparing the performance of a straight aerospike nozzle to that of a thrust-vectored aerospike nozzle. Throttling effects on the aerospike nozzle in an unvectored and in a vectored configuration …

A Pdms Sample Pretreatment Device For The Optimization Of Electrokinetic Manipulations Of Blood Serum, Timothy J. Abram

Master's Theses

This project encompasses the design of a pretreatment protocol for blood serum and adaption of that protocol to a microfluidic environment in order to optimize key sample characteristics, namely pH, conductivity, and viscosity, to enable on-chip electrokinetic separations. The two major parts of this project include (1) designing a pretreatment protocol to optimize key parameters of the sample solution within a target range and (2) designing /fabricating a microchip that will effectively combine the sample solution with the appropriate buffers to replicate the same bench-scale protocol on the micro-scale.

Biomarker detection in complex samples such as blood necessitates appropriate sample …

Traffic Signal Control With Swarm Intelligence, David Renfrew, Xiao-Hua Yu

Electrical Engineering

Traffic signal control is an effective way to regulate traffic flow to avoid conflict and reduce congestion. The ACO (Ant Colony Optimization) algorithm is an optimization technique based on swarm intelligence. This research investigates the application of ACO to traffic signal control problem. The decentralized, collective, stochastic, and self-organization properties of this algorithm fit well with the nature of traffic networks. Computer simulation results show that this method outperforms the conventional fully actuated control, especially under the condition of high traffic demand.

Electrocardiogram (Ecg) Signal Modeling And Noise Reduction Using Wavelet Neural Networks, Suranai Poungponsri, Xiao-Hua Yu

Electrical Engineering

Electrocardiogram (ECG) signal has been widely used in cardiac pathology to detect heart disease. In this paper, wavelet neural network (WNN) is studied for ECG signal modeling and noise reduction. WNN combines the multi-resolution nature of wavelets and the adaptive learning ability of artificial neural networks, and is trained by a hybrid algorithm that includes the adaptive diversity learning particle swarm optimization (ADLPSO) and the gradient descent optimization. Computer simulation results demonstrate this proposed approach can successfully model the ECG signal and remove high-frequency noise.

I/Q Compensation Of Frequency Dependent Response Mismatch In A Pair Of Analog Low-Pass Filters, Peter Kiss, Vladimir I. Prodanov

Electrical Engineering

Frequency dependent I/Q imbalance in real I/Q filter pairs compensation may be performed using a simple compensation module, placed in the receiver/transmitter chain, with a gain adjustment coefficient and a delay adjustment coefficient. The gain adjustment coefficient may be determined by amplitude measurements conducted at a selected frequency near the center of the band-pass region of the filters. The delay adjustment coefficient may be determined by phase measurements conducted at a selected frequency near the edge of the band-pass region of the filters. Statistical analysis may be used to determine types of real filters that are better suited for the …

A Computer-Based Approach To Material And Process Selection Using Sustainability And Ecological Criteria, Manocher Djassemi

Industrial Technology and Packaging

Decision on selecting a material or process for a particular product is a common task in product engineering and facility planning. Such decision may have a significant impact on entire product life cycle including raw material acquisition, product manufacture, use, disposal, and environment. Traditional factors for decision making are economical, functional and aesthetical properties of the product. However, the issues of sustainability and environmental impact of materials and manufacturing processes have gained a growing attention in recent decade by general population as well as academicians and industrial practitioners. The objective of this study is to explore a software tool for …

Development Of A Low Cost Handheld Microfluidic Phosphate Colorimeter For Water Quality Analysis, Sean C. Kaylor

Master's Theses

This thesis describes the design, fabrication, and testing process for a microfluidic phosphate colorimeter utilized for water quality analysis. The device can be powered by, and interfaced for data collection with, a common cell phone or laptop to dramatically reduce costs. Unlike commercially available colorimeters, this device does not require the user to measure or mix sample and reagent. A disposable poly(dimethylsiloxane) (PDMS) microfluid chip, powered by an absorption pumping mechanism, was used to draw water samples, mix the sample at a specific ratio with a molybdovanadate reagent, and load both fluids into an onboard cuvette for colorimetric analysis. A …

Using Conditional Inference Forests To Identify The Factors Affecting Crash Severity On Arterial Corridors, Abhishek Das, Mohamed Abdel-Aty, Anurag Pande

Civil and Environmental Engineering

Introduction

The study aims at identifying traffic/highway design/driver-vehicle information significantly related with fatal/severe crashes on urban arterials for different crash types. Since the data used in this study are observational (i.e., collected outside the purview of a designed experiment), an information discovery approach is adopted for this study.

Method

Random Forests, which are ensembles of individual trees grown by CART (Classification and Regression Tree) algorithm, are applied in numerous applications for this purpose. Specifically, conditional inference forests have been implemented. In each tree of the conditional inference forest, splits are based on how good the association is. Chi-square test statistics …

Reinvestigation Of Liquefaction And Nonliquefaction Case Histories From The 1976 Tangshan Earthquake, Robb E.S. Moss, Robert Kayen, Liyuan Tong, Songyu Liu, Guojun Cai, Jiaer Wu

Civil and Environmental Engineering

A field investigation was carried out to retest liquefaction and nonliquefaction sites from the 1976 Tangshan earthquake in the People's Republic of China (PRC). These sites were carefully investigated in 1978/1979 using standard penetration test (SPT) and cone penetration test (CPT) equipment; however the CPT measurements are obsolete because of the now nonstandard cone that was used at the time. In 2007 a modern cone was mobilized to retest 18 select sites that are particularly valuable because they experienced intense ground shaking, have high fines content, and are classified as nonliquefaction sites. Of the sites reinvestigated and carefully processed, 13 …

Frp Confined Reinforced Concrete Circular Cross Section Seismic Applications, Jeffrey G. Lyon

Master's Theses

In recent earthquakes, structures have not performed as well as expected resulting in a need for better means of retrofitting and improvements in seismic design. Fiber Reinforced Polymers (FRP), as a material with potential to increase strength and ductility of columns in conjunction with capacity design methodology, has promise for seismic design. By investigating the displacement, ductility, and flexural strength properties of FRP confined reinforced concrete circular cross sections, this study analyzes the seismic applications of FRP confinement.

The study is performed by incorporating an FRP confined concrete stress-strain model into a developed Moment-Curvature and PM Interaction software. This software …

Removal Of Boron From Produced Water By Co-Precipitation / Adsorption For Reverse Osmosis Concentrate, Imran Yusuf Rahman, Yarrow Nelson, Tryg Lundquist

Master's Theses

Co-precipitation and absorption methods were investigated for removal of boron from produced water, which is groundwater brought to the surface during oil and natural gas extraction. Boron can be toxic to many crops and often needs to be controlled to low levels in irrigation water. The present research focused on synthetic reverse osmosis (RO) concentrate modeled on concentrate expected from a future treatment facility at the Arroyo Grande Oil Field on the central coast of California. The produced water at this site is brackish with a boron concentration of 8 mg/L and an expected temperature of 80°C. The future overall …

Development Of A High Performance Micropropulsion System For Cubesats, Christopher Lorian Biddy

Master's Theses

Picosatellites are defined as satellites with a mass between 0.1 and 1kg (Miniaturized satellite). Picosatellites are typically designed to work together or function in formations (Miniaturized satellite). A specific type of Picosatellite known as CubeSats were introduced in 1999 and since then have increased in popularity so that there are now over 80 CubeSat programs around the world. CubeSats are defined as cubic units 10cm on each side and no more than 1kg in mass. CubeSats are required to conform to the CubeSat Standard created by California Polytechnic State University and Stanford University and be compatible with Cal Poly’s P-POD …

Performance Analysis And Life Prediction For Small Wind Turbine Blades: A Wood Laminate Case Study, Christopher James Nosti

Master's Theses

A detailed study of the fatigue life of wooden wind turbine blades for a new 10 kilowatt system was undertaken. A numerical model of the blades was created using the technical software package MATLAB in order to estimate the maximum stress occurring within the blade in response to changes in wind velocities based on a wind profile approximating the location where these turbines are expected to operate. The material properties of the wooden laminate were measured using an Instron tensile test machine and were found to be in line with published values. In parallel with this effort, a three dimensional …

Hardware Acceleration Of Multi-View Face Detection, Jungok Cho, Bridget Benson, Ryan Kastner

Electrical Engineering

This paper presents a parallelized architecture for hardware acceleration of multi-view face detection. In our architecture, the multi-view face detection system generates rotated image windows and their integral image windows for each classifier which perform parallel classification operations to detect non-upright (rotated) and non-frontal (profile) faces in the images. We use the training data from OpenCV to detect the frontal and profile faces based on the Viola and Jones algorithm. The proposed architecture for multi-view face detection has been designed using Verilog HDL and implemented in a Xilinx Virtex-5 FPGA. Its performance has been measured and compared with a Jones' …

Parallelized Architecture Of Multiple Classifiers For Face Detection, Junguk Cho, B. Benson, S. Mirazaei, R. Kastner

Electrical Engineering

This paper presents a parallelized architecture of multiple classifiers for face detection based on the Viola and Jones object detection method. This method makes use of the AdaBoost algorithm which identifies a sequence of Haar classifiers that indicate the presence of a face. We describe the hardware design techniques including image scaling, integral image generation, pipelined processing of classifiers, and parallel processing of multiple classifiers to accelerate the processing speed of the face detection system. Also we discuss the parallelized architecture which can be scalable for configurable device with variable resources. We implement the proposed architecture in Verilog HDL on …

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier

Master's Theses

Rapid battery exchange systems were built for an electric van and pedal assist electric bike as a method of eliminating the need to recharge the vehicles batteries in order to increase the feasibility of using electric propulsion as a method of efficient student transportation. After selecting proper materials it was found that the systems would need a protective coating to ensure consistent operation. 1020 cold rolled steel samples coated with multiple thicknesses of vinyl resin paint, epoxy resin paint, and powder coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective …

Bit Error Rate, Power And Area Analysis Of Multiple Fpga Implementations Of Underwater Fsk, Ying Li, Bridget Benson, Ryan Kastner, Xing Zhang

Electrical Engineering

There has been an increasing interest in creating short-range, low data-rate underwater wireless sensor networks for scientific marine exploration and monitoring. However, the lack of an inexpensive, low-power, underwater acoustic modem is preventing the proliferation of these sensor networks. Thus, we are building an underwater acoustic modem that considers cost and power at every level, from the analog electronics, to the modulation scheme, to the hardware platform. In this paper, we use reconfigurable devices to explore the design space of our modulation scheme – Frequency Shift Keying (FSK) – to select an implementation that provides the lowest power and area …

Safety Evaluation Of Multilane Arterials In Florida, Mohamed Abdel-Aty, Prem Chand Devarasetty, Anurag Pande

Civil and Environmental Engineering

Resurfacing is one of the more common construction activities on highways. While its effect on riding quality on any type of roadway is obviously positive; its impact on safety as measured in terms of crashes is far from obvious. This study examines the safety effects of the resurfacing projects on multilane arterials with partially limited access. Empirical Bayes method, which is one of the most accepted approaches for conducting before–after evaluations, has been used to assess the safety effects of the resurfacing projects. Safety effects are estimated not only in terms of all crashes but also rear-end as well as …

Drop Impact Reliability Of Edge-Bonded Lead-Free Chip Scale Packages, Andrew Farris, Jianbiao Pan, Albert Liddicoat, Michael Krist, Nicholas Vickers, Brian J. Toleno, Dan Maslyk, Dongkai Shangguan, Jasbir Bath, Dennis Willie, David A. Geiger

Industrial and Manufacturing Engineering

This paper presents the drop test reliability results for edge-bonded 0.5 mm pitch lead-free chip scale packages (CSPs) on a standard JEDEC drop reliability test board. The test boards were subjected to drop tests at several impact pulses, including a peak acceleration of 900 Gs with a pulse duration of 0.7 ms, a peak acceleration of 1500 Gs with a pulse duration of 0.5 ms, and a peak acceleration of 2900 Gs with a pulse duration of 0.3 ms. A high-speed dynamic resistance measurement system was used to monitor the failure of the solder joints. Two edge-bond materials used in …

New Pressure Sensitive Device To Measure And Predict Package Drops, Sher Paul Singh, Jay Singh, Young Paek

Industrial Technology and Packaging

Pressurex^®, a tactile pressure sensor film which is manufactured by Sensor Product Inc. (East Hanova, NJ, USA), is one of the emerging materials that is convenient for measurements of the strength of pressure and pressure distribution profile between two contacting surfaces without any instrumentation. It immediately reveals impact distribution and magnitude based on intensity and dispersion of color. The intensity of this color is proportional to the amount of force applied allowing the user to actually quantify the stress characteristics across the impact surface. The objective of this paper was to examine free fall drop test results using …

Packaging Trends For Bottled Water, N. Noble, L. Paul, C. Mcminimee, M. Mallett, Jay Singh

Industrial Technology and Packaging

The Journal of Applied Packaging Research(JAPR) is an international forum for the dissemination of research papers, review articles, tutorials and news about innovative or emerging technologies for the packaging industry. In an effort to introduce research conducted by packaging students to the academics and industry professionals and to provide an outlet for these future stewards of the packaging industry to experience the world of publishing, JAPR, occasionally includes such work in its issues.

Bottled water is drinking water packaged generally in plastic bottles and regulated by national and local agencies. The Beverage Marketing Corporation defines the bottled water market …