Engineering Commons^™

Asphalt Rubber Chip Seals A Cost Effective And Sustainable Solution For Road Infrastructure, Gunnar C. Bertsch

Construction Management

Asphalt Rubber Chip Seals provide a durable, cost effective, and environmentally friendly alternative to traditional paving methods by incorporating recycled waste tires. This study evaluates Asphalt Rubber Chip Seals implementation in Arizona and Michigan comparing its effectiveness to conventional paving approaches and the current applications in California. Variations in state funding for road maintenance significantly impact infrastructure quality and longevity, influencing the choice of paving solutions. ARCS has demonstrated resilience in extreme weather conditions, making it a viable option for expansion to states like Arizona and Michigan, where climate variations pose challenges for pavement longevity. The research assesses construction costs, …

Development Of A Work Plan For The Mass Timber Installation Phase In The Gateway Decathlon, Eduardo Contreras

Construction Management

This project was the development of detailed work plan for the installation of mass timber components in the Gateway Decathlon project, which emphasizes sustainable construction practices aimed at reducing environmental impact. The work plan provides a step-by-step guide for the efficient and safe assembly of structural elements, covering the sequence of tasks, necessary materials and tools, safety procedures, and quality checks to ensure proper execution. By connecting theoretical design concepts with practical construction activities, the plan addresses various logistical challenges encountered during building phases. It highlights the advantages of using mass timber, such as reduced carbon emissions and reliance on …

The Utilization Of Ai To Improve Efficiency In Construction Management, Sam Balestreri

Construction Management

The construction industry is undergoing a technological transformation, with artificial intelligence emerging as a tool to enhance efficiency, communication, and decision-making. However, the industry has been slow to adopt these advancements due to challenges in integrating new technologies with traditional workflows. This research examines the potential of AI to improve construction management by automating processes such as submittal logs and scope of work documents. The study evaluates ProjectEngineer.ai, an AI-powered co-pilot, to determine its impact on workflow efficiency, writing enhancement and precision, and project outcomes. An analysis of AI-assisted document management methods was conducted in CM 411 Specialties Construction Management, …

Assessing Experiences Of Women In Mep Field And Project Management Roles, Lily K. Brown

Construction Management

Despite increased enrollment of women in construction education programs, the industry is not seeing significant gains in the percentages of women, especially in field and project management roles. This study looks specifically at the experiences of women in the Mechanical, Electrical, and Plumbing (MEP) sector working in field and project management. Women in different career stages were interviewed to gain perspective on the state and climate of the industry from a woman’s perspective. The interviews were analyzed for recurring themes and three primary themes that emerged were: 1) women see themselves as able to bring about better team synthesis than …

Introduction Of An Industial Construction Topics Course In The Cal Poly Cm Curriculum, Connor N. Merz

Construction Management

The industrial construction sector represents a significant portion of the construction industry, yet it remains underrepresented in many academic programs, including the Construction Management (CM) curriculum at California Polytechnic State University (Cal Poly). This research investigates the feasibility and interest in introducing a dedicated industrial construction elective course to bridge this gap. A student survey was conducted to assess interest levels and determine relevant topics for the course, while an industry interview provided professional insight into necessary competencies. Survey results indicated strong student interest, with 71% expressing a willingness to take the course. The study identified key topics such as …

Comparing The Work-Life Balance And Stress At General Contractors And Cm Agencies, Lucca A. Arcolino

Construction Management

The struggle for a work-life balance has become a significant issue in the construction industry, resulting in personal and organizational challenges. This paper will compare work-life balance and stress between industry professionals working at a CM agency and those at a general contractor. A CM agency is responsible for overseeing the construction project alongside the owner by providing planning, cost estimation, scheduling, and quality assurance. In contrast, the general contractor is responsible for managing the day-to-day operations on-site. A survey was distributed to both types of construction firms to collect data about work hours, work-life balance, stress, and biggest stressors. …

Yolot: A Recurrent Yolo Model For Robust Video-Based Automotive Object Detection, Dylan Jay Baxter

Master's Theses

Though incredibly effective at detecting objects in isolated frames, modern object detection models are often not designed to take advantage of information present in previous frames of a video stream, despite that data being readily avail- able. To address this shortcoming, this paper proposes YOLOT, a modification of the widely used YOLOv8 object detection model, which seeks to utilize this temporal information with the addition of recurrent structures. In the design of YOLOT, a series of recurrent convolutional modules were inserted at backbone and neck outputs and the final and most effective design was found to be the insertion of …

Float Element Design, Bryn Lewis

Liberal Arts and Engineering Studies

I have spent the last three years as a Design team member of Cal Poly Rose Float, the last year as a Design Lead. As a member of the design team, I followed blueprints, bent pencil steel into shape, and welded those pieces together. I worked as part of a team, and eventually led my own small team. Cal Poly Rose Float teaches its members many skills and abilities. Not just bending and welding metal, but also teamwork and leadership skills. However, it doesn’t teach us everything. Every leadership member gives input on the overall theme and design of the …

Treating Ground Water For Agricultural And Individual Consumption, Gabby Miller, Bronson Scott, Michael Clawson

Biomedical Engineering

This project, conducted in collaboration with Cal Poly seniors and Da Vinci High School students, aims to develop a solar-powered groundwater purification system. This system is designed to provide clean water for agricultural use and individual consumption, addressing the growing concerns of groundwater contamination and accessibility needs. The final prototype integrates a gravity filtration system combined with chemical purification, utilizing aluminum sulfate and chlorine to remove particulates, bacteria, and organic compounds.

The research phase involved an extensive review of groundwater contamination issues, existing filtration technologies, and market analysis. Key design constraints included cost-effectiveness, ease of maintenance, and minimal energy consumption, …

Tiny Temp Neonatal Intensive Care Unit Infant Temperature Monitor, Alexandria Lukacsffi, Sydney Dedrick

Biomedical Engineering

This document outlines the key steps taken in the specification, design, and functionality of the Tiny Temp Neonatal Intensive Care Unit Infant Temperature Monitor. The BICEP team identified temperature monitors for infants in incubators in the NICU as an area of need after surveying hospitals in the San Luis Obispo area. Current thermometers are oversimplified in design, consisting of only the temperature probe and a piece of adhesive holding the probe directly onto the infant's skin. As a result, the adhesive is weak to prevent harm to the infant and, therefore, falls off the infant easily and frequently, posing a …

Peripheral Vagus Nerve Stimulation (Pvns) Device For Epilepsy, Logan P. Beckstrand, Alexander P. Crary, Grace E. Heller

Biomedical Engineering

Our research team developed a PVNS for Epilepsy device which is intended to act as a preventative measure against seizures for patients with epilepsy. The device is a less invasive alternative to the VNS device on the market using electroacupuncture at the Shenmen and Xin points along the posterior pinna to stimulate the vagus nerve.

Sprinter Start Block Training Aid, Kayla Lovejoy, Kevin Almontes

Biomedical Engineering

Currently, track and field sprinters ranging from beginner level to world-class have no practical tool that provides quantitative feedback of value on quality of start and quality of the three distinct phases of their sprint race, such that they can quantify the value of their adjustments. Our team will create a device that integrates with the sprint starting block to provide quantifiable data on the quality of a sprinter’s start. This Statement of Work describes drawbacks of current solutions, existing patents, customer requirements, engineering specifications, and our project plan.

Maglock - Electromagnetic Pedal Aid For Amputees, Minh Vo, Matthew Chew

Biomedical Engineering

For this project, we aimed to design components that could easily be swapped out and into vehicles, which would help them accomplish the task of locating and securing a prosthetic foot to a bike and/or car pedal. A common problem among cyclists and drivers with prosthetic legs is their foot slipping off the pedal while in use; these components could be used for other common applications such as cars, bikes, etc. Stakeholders for this product included automotive companies and handicap product distributors. The focused objective is to provide dexterity and quick attach/detach support for cyclists and drivers with lower limb …

Design, Test, And Comparison Of A Photovoltaic Thermal Hybrid Solar Collector Utilizing A Thermosiphon, And Theory And Analysis Of Related Predictive Computer Model, Lance Brown

Master's Theses

Design, construction and testing of a photovoltaic thermal collector, or PVT, was completed to determine efficiency improvements of this system compared to a conventional solar panel and to find the thermal energy gained through hot water storage. Flow, driven by density changes from solar radiation, creates a thermosiphon, moving water without the use of a pump and ultimately drawing heat away from the solar panel. This is done to create a more efficient solar panel as well as decreasing potential damage due to high temperatures. Evaluation of electrical efficiency, thermal efficiency and flowrate allow for comparison between other PVT systems. …

Development Of Ex-Situ Accelerated Chemical Stress Test Protocol For Common Anionic Exchange Membrane Chemistries, Michael D. Friend, Michael D. Friend

Master's Theses

The development of sustainably produced hydrogen fuel (“green hydrogen”) is key for the transition to clean energy sources. Green hydrogen is produced via water electrolysis. As with many clean energy sources, one of the major barriers for scaling water electrolysis is cost. A newer category of water electrolysis is Anionic Exchange Membrane (AEM) water electrolysis. AEM electrolysis systems have the potential to cost less as they do not require the expensive precious metal catalysts the current high preforming Proton Exchange Membrane water electrolysis technologies do. However, AEM lifetimes must be long enough to be cost competitive and AEM chemical durability …

Risc-V Gpu Acceleration On Low-Cost Embedded Systems, Fadi M. Alzammar

Master's Theses

The Vortex project from Georgia Institute of Technology was created to provide an open-source hardware and software GPGPU research platform based on RISC-V. Skybox was introduced as an extension to Vortex to provide dedicated support for 3D graphics rendering acceleration as a complete GPU platform. This work presents contributions to the render output unit of Skybox, including the development of a blend unit, cache bypassing mechanisms, and performance monitoring metrics. With these, Skybox has succeeded in its goal of accelerating graphics rendering on RISC-V platforms. This work also establishes a foundation for adapting Vortex to low-cost embedded platforms such as …

From Football To Construction: Transferring Leadership Competencies For The Era Of Construction 4.0, Payson W. Campisano

Construction Management

This study aims to explore the intersection of leadership competencies developed through football and their applicability to the construction industry, with a focus placed on the emerging leadership needs in Construction 4.0. Drawing on insights from interviews with current and former student-athletes who study or studied construction management at the California Polytechnic State University in San Luis Obispo, the research highlights the transferability of key leadership qualities from football, such as resilience, teamwork, and critical thinking, to the cognitive, interpersonal, business, and strategic domains of leadership within construction management. Building on the work of Yang, Sunindijo, and Wang (2020), who …

Leaning Pine Arboretum Gazebo, Carson C. Henry

Construction Management

The Leaning Pine Arboretum gazebo provides an aesthetic relaxation space for visitors to the arboretum as well as being a functional structure for faculty as a future event space. This gazebo replaces an existing one, revitalizing the space in conjunction with the arboretum’s planned growth over the coming years. There were many challenges throughout the construction process including permitting issues, design complexities, and coordination with architects and engineers. Persevering through these taught a great deal about project management, the construction industry, and the importance of teamwork. The structure is a total rejuvenation of the prior structure; it is now stronger, …

Developing A 4d Logistics Educational Module With Cmbuilder, Misael Gonzalez Ramirez

Construction Management

The increasing adoption of Building Information Modeling (BIM) in the construction industry has led to a need for its increasing integration into construction management education. While existing curriculum covers various BIM applications, there is often a gap in in-depth instruction on BIM-based site logistics planning. This paper details the development of an educational module designed to address this gap, focusing on 4D site logistics and phasing using cmBuilder. The module aims not only to provide students with technical software skills but also to equip them with practical skills in visualizing, planning, and communicating complex construction site logistics. Through a series …

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Fault Box Modeling Of Dip Slip Faults: A Framework For Fault Box Design And Future Studies, Hailey Pressnell

Master's Theses

The behavior of soils during surface fault rupture is a serious concern in the planning and design of infrastructure that may be located within or near a fault zone. Challenges associated with developing mitigation measures for surface fault rupture include the uncertainty of fault rupture and the variability of fault behavior. Current analytical procedures define surface fault rupture according to the type of fault movement (strike slip, normal or reverse), the amount of displacement on the fault, and the mechanics of the material overlying the fault. The purpose of this thesis is to reconfirm analytical solutions and gain a better …

Analyzing The Safety Effects Of Edge Lane Roads For Motor Vehicle Users, John Yang

Master's Theses

This thesis builds upon a prior study that analyzed the safety effects of Edge Lane Roads (ELRs) within the U.S. context, addressing gaps related to collision, traffic volume, and speed data. An ELR is a roadway configuration that accommodates two-way automobile traffic within a single center lane while providing edge lanes for vulnerable road users (VRUs), i.e., bicyclists or pedestrians. Although the concept of a single shared lane for opposing traffic often raises safety concerns among the public, ELRs have demonstrated potential to control speeds, optimize roadway space, and improve traffic operations on low-volume roads.

To evaluate safety outcomes, this …

Increasing Drift Capacity Of Non-Ductile Concrete Shear Walls Through Confinement With Fiber-Reinforced Polymer Application, Andrew Duong, Sophia Maglabe, Sheyna Rongong

Architectural Engineering: Graduate Reports

The seismic response and laboratory testing of pre-1980s reinforced concrete (RC) shear walls commonly exhibit undesirable concrete crushing and rebar buckling in the wall end-zones leading to a flexural compressive failure. The lack of ductility of these walls is attributed to low reinforcement ratios and absence of special boundary elements (SBE) as required by modern design code. Thus, the authors are proposing a fiber reinforced polymer (FRP) retrofit method to provide confinement to the end-zones of pre-1980s walls equivalent to that of an SBE. Current industry applications of FRP have largely been for shear strengthening of RC beams, columns, and …

Measuring Gait Of Total Knee Arthroplasty Patients Pre-Op And Post-Op Using A Smartphone, Celeste A. Thai

Master's Theses

Motion capture technology is a tool often used in orthopedic applications, including measuring gait dysfunctions. However, gait analysis research focused on total knee arthroplasty (TKA) patients is limited, especially using motion capture systems. This may be due to a multitude of factors, such as inaccessibility to gait labs to the general public, difficulty of travel post-surgery, and overall costs of care and maintenance of motion lab equipment. New emerging novel methods use wearable devices such as smartphones and inertial measurement devices (IMUs) to perform gait assessment and are becoming favorable due to their increasingly ubiquitous nature. One such method using …

Design And Testing Of A Prototype Prosthesis For Pediatric Upper-Limb Transradial Amputees To Provide Adjustable Size And Modular Characteristics, Paul Heli

Master's Theses

This study was conducted to develop a financially accessible body-powered upper-limb prosthetic socket that can be adjusted to maintain fit and function for a growing child with a transradial amputation. The main objectives of the study were to design, manufacture, and test a device that was comfortable, functional, affordable, and adjustable. The socket was designed to be comfortable using global variables controlling the computer-aided design (CAD) model size with user-specific measurements. Comfort was also incorporated using shape-forming of the socket for specific residual limb features. The device was designed to perform the two main functions of suspension, or attachment to …

Development Of A Pressure Sensing System Coupled With Deployable Machine Learning Models For Assessing Residual Limb Fit In Lower Limb Prosthetics, Maxwell D. Lewter

Master's Theses

Lower limb amputations pose significant challenges for patients, with over 150,000 cases annually in the U.S., leading to a high demand for effective prosthetics. However, only 43% of lower limb prosthetic users report satisfaction, primarily due to issues with socket fit, which is critical for comfort, stability, and preventing injury. This study presents a deployable sensing system for potentially real-time monitoring of prosthetic socket fit by using pressure sensors and convolutional neural networks (CNNs) to analyze the pressure distribution within the socket. A novel CNN architecture, utilizing both dilated and strided convolutions, is proposed to effectively capture spatial-temporal patterns in …

Rover Chassis & Suspension, Nikki Zainer, Aung Bhone Zaw, Joelle Romero, Colin Thompson

Mechanical Engineering

The Mars rover project is part of the University Rover Challenge (URC), a robotics competition organized by the Mars Society that tasks student teams with designing and building the next generation of Mars rovers. Cal Poly Human Space Technology and Research (CP-HSTAR) has inherited a rover developed by a previous senior design team.

This report documents the progress made in refining the rover’s structure, highlighting key specifications, and detailing design improvements aimed at enhancing the suspension’s structural integrity, improving wheel traction, increasing modularity, and developing an enclosed chassis for electronic components.

This report includes a detailed breakdown of the rover’s …

Perceptual Hash Based Content Matching, Nicholas Daniel Chenevey

Master's Theses

The proliferation of video content and AI generated imagery has introduced a number of new challenges in content identification and verification. The ability to trace content back to its source has become a critical problem as video content increases both naturally and synthetically through AI generation. This thesis provides the design, analysis, and experimental verification for a perceptual hash based framework aimed at addressing these challenges. Perceptual hashing is a method for encoding the visual content of images into compact and easily comparable binary strings. This process is used as the foundation for content matching in videos and source verification …

The Integration And Validation Of A Class 3b Laser For Stereo Particle Imaging Velocimetry, Jensen Lam

Master's Theses

Particle Imaging Velocimetry (PIV) is a laser flow diagnostic measurement technique used to measure spatial and temporal velocity fields. In an effort to promote experimental aerodynamic research, specifically an entry point for students to learn Particle Imaging Velocimetry, an in-house Class 3B laser PIV system was developed and its experimental results were verified with a Class 4 laser. Both systems were integrated on the Cal Poly Water Tunnel Laboratory. The work emphasizes the application of lasers controlled by a micro-controller to perform microsecond-based pulses and integrating a newly-developed device with an old system consisting of software, cameras, and synchronizers. The …

Design, Manufacturing, And Assembly Of Modular Snake-Like Robotic Arm, Alongside Design And Implementation Of System’S Digital-Twin, Scott Brown

Master's Theses

A unique modular snake-like robotic arm, also referred to as MA\RS – the Modular Arm \ Robotic System - was designed, manufactured, assembled, simulated, and programmed to create a modular robot which could move to a desired end position given the number of links, the position of the end link and the duration of motion. This robotic arm serves as the start of research into a modular space robotic system to be used in low-gravity environments. As such, this project focused on developing the initial design of the robot and its digital twin. The system’s modularity allows for changes to …