Engineering Commons^™

Digester Selection And Operation For Heybeli Island, Spencer Fackler, Joseph Violetti

Industrial and Manufacturing Engineering

The Heybeli Digester project originated with Sema Alptekin in her personal research and was incorporated into a Senior Project opportunity at California Polytechnic State University, San Luis Obispo. The aim of this project was to select and design a plan for the use of a digester for the island of Heybeli, Turkey. The objective of this plan was to incorporate economic, social, and environmental justifications to evaluate if a digester would be a benefit to the community.

Systems Engineering analysis is a vital tool when working with complicated projects that include multiple systems interfacing with one another. Through the use …

Determining A Reliability Factor For Photovoltaic's In San Luis Obispo, Ryan S. Roach

Industrial and Manufacturing Engineering

This project will analyze raw photovoltaic (PV) solar panel performance data in order to determine a reliability factor for solar panels in San Luis Obispo. This project is a subset of a larger project being performed by SLO RESCO, which is funded by a grant from the California Energy Commission. Their project will explore the use of solar, wind, geothermal, and biomass renewable resources. The scope of this project is limited to a small section of RESCO's analysis of solar panel technology and implementation in which a reliability factor will be generated.

The objective is to determine a reliability factor …

Application Of Radio Frequency Identification To An Asset Checkout System, Ma'ayan K. Bennaim

Industrial and Manufacturing Engineering

Radio Frequency Identification (RFID) is a growing technology which is increasingly utilized throughout industry. This senior project identifies an RFID alternative to the checkout system in the tool crib of the Cal Poly Aero Hanger. A new database is designed and built to interface with an RFIDeas AIR enroll reader. The system realizes vast time savings in check in times and increases student accountability for the tools which are checked out by tagging tools.

The Optimal Warehouse Location For Cal Poly's Campus Dining, Robert Buie

Industrial and Manufacturing Engineering

The Cal Poly Corporation and Campus Dining face the challenge of meeting the growth of students and dining venues on campus with the limited space capacity of their warehouse in building 19. Given a $250,000 budget, Campus Dining has an option to keep the warehouse at the current location at building 19 or moving the warehouse to building 82 off Mt. Bishop Road. Each warehouse location has its benefits as building 19 is in the center of campus and building 82 has much more shelving space than building 19. The objective of this project was to select the better choice …

Visual Representations Of Queried Database Results Using Google's Mapping Technologies, Steven Michael Kilbert

Industrial and Manufacturing Engineering

Database queries have been used in business applications throughout the world to filter out specific information which is often used as a basis for making a decision. Despite the broad use of queries, there are only a limited number of ways to represent results, the most common being a dynaset, or results table. This paper describes the investigation of methods to create more visual representations of results using maps to show queried geospatial data. From these methods, applications were successfully developed to create customized maps in Google Earth and Google Maps based on queried geographical data from Microsoft Access databases. …

Mixi Thruster Tungsten And Thoriated Tungsten Testing, Jesse R. Miller

Aerospace Engineering

The purpose of this project is to build and evaluate a tungsten filament cathode for the 3-cm Miniature Xenon Ion (MiXI) thruster. The filament is to be used for future tests within the CP 3-cm MiXI and thoriated tungsten is to be examined as a possible alternative. No testing of these filaments was conducted, but the preparatory work has been conducted for future testing.

The Systemic Correlation Between Mental Models And Sustainable Design: Implications For Engineering Educators, Linda Vanasupa, Roger Burton, Jonathan Stolk, Julie B. Zimmerman, Larry J. Leifer, Paul T. Anastas

Materials Engineering

Many studies have illuminated our understanding of the kinds of competencies and behaviors exhibited by effective designers. Against the backdrop of global challenges made more urgent by unintentional negative impacts of engineered products and systems, however, we are left to deduce that our ways of educating engineering designers is fundamentally flawed. We assert that one can trace the cause of our collective, unintended negative consequences to the mental models of reality that we consciously or unconsciously carry. In this paper, we present the case for developing awareness and facility with mental models. We also suggest an alternate mental model as …

Where Is All That Water Going?, Charles M. Burt

BioResource and Agricultural Engineering

Some have proposed to conserve 4-6 Million AF/yr in Agriculture with pragmatic, economical measures. All we need to do is find the inefficiencies. Then we'll get rid of them.

Wi-Fi Localization Using Rssi Fingerprinting, Michael Quan, Eduardo Navarro, Benjamin Peuker

Computer Engineering

Wireless Local Area Networks using Wi-Fi is becoming more and more ubiquitous. As such, they provide a potential pre-built infrastructure for small area localization. This project serves as a proof of concept for a playground child tracking system to be deployed at Cal Poly's Child Development Playground Lab. The two main options for doing Wi-Fi localization are triangulation and fingerprinting. Triangulation involves mapping signal strength as a function of distance while fingerprinting creates a probability distribution of signal strengths at a given location and uses a map of these distributions to predict a location given signal strength samples. The triangulation …

Intelligent Irrigation Zone Splitter, David Boeck

Electrical Engineering

The intelligent irrigation zone splitter allows easy expansion of an existing irrigation controller. To expand on an existing controller a new wire is needed to run between the controller and the valve. This path may be buried beneath driveways, patios, and sidewalks. The intelligent irrigation zone splitter uses an already existing wire path to control two valves and create a new watering zone. This controller uses timing and memory to split the total watering time of the zone.

Dual Axis Solar Tracker, Weston Sapia, Jason Birnie

Electrical Engineering

No abstract provided.

Nitrous Oxide Cooling In Hybrid Rocket Nozzles, Patrick Lemieux

Mechanical Engineering

The Department of Mechanical Engineering at the California Polytechnic State University, San Luis Obispo, has developed an innovative program of experimental research and development on hybrid rocket motors (where the fuel and the oxidizer are in different phases prior to combustion). One project currently underway involves the development of aerospike nozzles for such motors. These nozzles, however, are even more susceptible to throat ablation than regular converging diverging nozzles, due the nature of their flow expansion mechanism. This paper presents the result of a recent development project focused on reducing throat ablation in hybrid rocket motor nozzles. Although the method …

Design Techniques To Improve Time Dependent Dielectric Breakdown Based Failure For Cmos Circuits, Emanuel S. Tarog

Master's Theses

This project investigates the failure of various CMOS circuits as a result of Time Dependent Dielectric Breakdown (TDDB) and explores design techniques to increase the mean time to failure (MTTF) of large-scale circuits. Time Dependent Dielectric Breakdown is a phenomenon where the oxide underneath the gate degrades as a result of the electric field in the material. Currently, there are few well documented design techniques that can increase lifetime, but with a tool chain I created called the MTTF Analyzing Program, or MAP, I was able to test circuits under various conditions in order to identify weak links, discover relationships, …

Impaired Vascular Reactivity Following Chronic Ischemia In The Arteries Of The Mouse Hindlimb, Thomas (Tom) Kesler

Biomedical Engineering

Collateral dependent hyperemia is reduced following chronic ischemia, but the contribution of individual vessel reactivity is unknown. Further, it is not known what aspect of the complex ischemic injury response impacts vascular reactivity. To determine the impact of ischemia on vascular reactivity, we measured functional vasodilation in the muscular branch artery following resection of the femoral artery proximal to the muscular branch. On day-14 after surgery the diameter of the muscular branch was measured using side-stream dark field (SDF) imaging intravital microscopy. At moderate intensity skeletal muscle contraction (1mA, 200µs, 8Hz, 90sec), functional vasodilation is reduced compared to the contralateral …

Morphological Assessment Of Basic Multicellular Unit Resorption Parameters In Dogs Shows Additional Mechanisms Of Bisphosphonate Effects On Bone, Matthew R. Allen, Antonia M. Erickson, Xiang Wang, David B. Burr, R. Bruce Martin, Scott J. Hazelwood

Biomedical Engineering

Bisphosphonates (BPs) slow bone loss by reducing initiation of new basic multicellular units (BMUs). Whether or not BPs simply prevent osteoclasts from initiating new BMUs that resorb bone or also reduce the amount of bone they resorb at the BMU level is not clear. The goal of this study was to determine the effects of BPs on three morphological parameters of individual BMUs, resorption depth (Rs.De), area (Rs.Ar), and width (Rs.Wi). After 1 year of treatment with vehicle (VEH), alendronate (ALN; 0.10, 0.20, or 1.00 mg/kg/day), or risedronate (RIS; 0.05, 0.10, or 0.50 mg/kg/day), resorption cavity morphology was assessed in …

Impaired Vascular Reactivity Following Chronic Ischemia In The Arteries Of The Mouse Hindlimb, Trevor Cardinal, Thomas J. Kesler, Matthew D. Yocum, Tyler S. Smith, Nolan M. Mott

Biomedical Engineering

No abstract provided.

Measurement And Analysis Of Temperature And Pressure In High Altitude Air Shipments, Sher Paul Singh, Jay Singh, J. Stallings, Gary J. Burgess, K. Saha

Industrial Technology and Packaging

This study was performed (at the request of the FAA) to measure temperature and pressure conditions observed by standard packages in the FedEx Next Day Air network and the environmental conditions of passenger aircrafts. To measure the single parcel environment, two destinations known to be served by non-pressurized feeder and pressurized aircrafts in the USA, San Luis Obispo, California, and Twin Falls, Idaho, were used to represent higher altitude paths. Test packages (0.30 × 0.30 × 0.30 m) containing one MadgeTech PRTemp110 recorder were shipped Priority Overnight by FedEx from East Lansing, Michigan. For 6 weeks, two test packages were …

Measurement And Analysis Of ‘Small’ Packages In Next-Day Air Shipments, Sher Paul Singh, Jay Singh, K. C. Chiang, K. Saha

Industrial Technology and Packaging

Packaged goods are shipped globally using various means of transportation. Over the past two decades, there has been a continuous increase in studies that measure and analyze dynamic events that occur to packages during transportation and handling. These data offer useful information to design and test packages, and provide protection from potential hazards like drops and impacts. However, none of the past studies are directed towards single packages regarded as 'smalls'. 'Smalls' or small-package product systems are defined as those with volume of less than 0.013 m³, a longest dimension of 0.356 m and a weight of 4.54 …

E.J. Gallo Winery Spirit-Makers Facility, Aaron Pickar

Industrial and Manufacturing Engineering

With growing demand for E.J. Gallo spirit brands, the cramped and cluttered facility allocated to the spirit-makers does not provide an adequate work environment to design and test new hard alcohols. E.J. Gallo Winery wants to relocate the spirit-makers to a new facility located near the brandy production floor for under 200,000 dollars. In order to do this, a revised systematic approach to facility design is used.

In this process, the departments are first defined, then the relationships between these departments and the space requirements are documented. Once these planning steps are complete, alternative layouts are constructed and analyzed until …

Implementing Rfid To Improve Animal Shelter Inventory And Allocation, Adam Mach

Industrial and Manufacturing Engineering

The purpose of this project is to observe the best way to incorporate Radio Frequency Identification (RFID) technology into the animal inventory system present in animal shelters, while also observing the benefits of implementing this system. The Woods Humane Society was used in this project as a sample animal care facility that could benefit from this application.

Many RFID systems can be observed in other industries, but very few examples this technology exist in animal shelters or smaller animal care facilities. Part of the reason for that is because funds are scarce at most animal care facilities, like the Woods …

Design And Manufacture Of Tennis Ball Retriever, Philip Hurst

Industrial and Manufacturing Engineering

No abstract provided.

The Design And Manufacture Of A Light Emitting Diode Package For General Lighting, Michael S. Krist

Master's Theses

Lighting technologies have evolved over the years to become higher quality, more efficient sources of light. LEDs are poised to become the market standard for general lighting because they are the most power efficient form of lighting and do not contain hazardous materials. Unfortunately, LEDs pose unique problems because advanced thermal management is required to remove the high heat fluxes generated by such relatively small devices. These problems have already been overcome with complex packaging and exotic materials, but high costs are preventing this technology from displacing current lighting technologies.

The purpose of this study is to develop a low-cost …

Cost Of Quality In The Construction Industry, Philip L. Barlow

Construction Management

The construction industry needs to decrease its costs due to nonconformance by implementing an objective model for analyzing the excessive cost of poor quality and the overall savings realized from good quality. Direct cost estimates from rework in commercial building construction average about 5%. A simple calculation based on U.S. construction industry expenditures of $1.246 trillion in 2007 reveals that $62 billion is wasted just on the direct cost construction rework alone! The term quality can be applied in many different ways to various aspects of the construction process. This paper proposes a model which helps illustrate how the various …

Analysis And Selection Of New Rental Paintball Masks For Gladiator Paintball Park, Geoff Wakefield

Industrial and Manufacturing Engineering

This project is designed to select new rental paintball masks for Gladiator Paintball Park. The currently used rental masks are worn down and need replacement. Criteria for new rental masks are examined and include customer preferences, owner's constraints, and time studies. Candidate masks were found by asking customers what they like in rental masks, interviewing other paintball field owners, and referring to the online paintball community. Three candidate masks were found, the V-Force Vantage, JT Alpha, and Kingman java paintball masks. These masks were compared to the currently used rental masks, the V-Force Armor. Customers were surveyed to find out …

Design And Implementation Of A Neural Network Controller For Real-Time Adaptive Voltage Regulation, Xiao-Hua Yu, Weiming Li, N. F. N. Taufik

Electrical Engineering

An adaptive controller based on multi-layer feed-forward neural network is developed for real-time voltage regulation of a class of PSFB (phase-shifted full-bridge) DC–DC converters. The controller has the unique advantages of nonlinear mapping and adaptive learning, and performs well over a wide range of input voltages and output load currents. The controller is implemented and tested in hardware using a DSP (digital signal processor) board. Experimental results show that it outperforms conventional controllers in both line regulation and load regulation.

Design And Implementation Of A Neural Network Controller For Real-Time Adaptive Voltage Regulation, Xiao-Hua Yu, Weiming Li, Taufik

Electrical Engineering

An adaptive controller based on multi-layer feed-forward neural network is developed for real-time voltage regulation of a class of PSFB (phase-shifted full-bridge) DC–DC converters. The controller has the unique advantages of nonlinear mapping and adaptive learning, and performs well over a wide range of input voltages and output load currents. The controller is implemented and tested in hardware using a DSP (digital signal processor) board. Experimental results show that it outperforms conventional controllers in both line regulation and load regulation.

Discussion Of “Analyzing Liquefaction-Induced Lateral Spreads Using Strength Ratios" By S.M. Olson And C.I. Johnson, Robb E.S. Moss, Justin Chow Hollenback

Civil and Environmental Engineering

No abstract provided.

Acs Custom Creation's New Business And Assembly Operations, Kent Christensen

Industrial and Manufacturing Engineering

ACS Custom Creations had assembly and business operations that wasted time and wasted money. The objective of the project is to improve and implement ACS Custom Creations business and manufacturing operations. The proposed assembly process involves the rearranging of the bottlenecked steps to eliminate constraints. The assembly workstations were also redesigned to reduce cycle time. With the improvement of the new assembly and business operations, ACS is poised to grow into a bigger company. Financial Statements were created to improve visibility of the company’s historical data. These financial statements include an income statement, balance sheet, and a cash flow statement. …

Solder Qwik Pentm, Katherine E. Robbins

Industrial and Manufacturing Engineering

Electronics soldering is a technique used frequently in the manufacturing of Printed

Circuit Boards (PCB) to attach small electronic parts or wires together. Often times

the need to remove a solder joint arises; this is known as desoldering. Solder wick,

fine braided copper wire infused with rosin, is one of the most effective ways to

desolder because it results in the cleanest joints. Currently using solder wick

involves several time consuming and somewhat awkward steps. This report will

cover the process behind designing, manufacturing, and testing a new ergonomic,

dispenser for solder wick that can be used with one hand. …

Seismic Analysis Of Buildings To Recorded Motions, Rakesh K. Goel

Civil and Environmental Engineering

This investigation focused on developing an improved understanding of challenges associated with computation of nonlinear response of three-dimensional building to recorded ground motions, and if the base shear estimated from recorded motions, denoted as “estimated base shear” in this report, is an accurate indicator of the true base shear. For this purpose, three-dimensional models of two buildings – one reinforced-concrete building and one steel building – are developed in OpenSees and Perform3D¬. The analysis of these models included pushover analysis for lateral force distribution proportional to the first mode in each of the two principle directions, and nonlinear response history …