Engineering Commons^™

Ultra-Capacitor Based Electric Bicycle Regenerative Braking System, Alex C. Bronstein

Electrical Engineering

An experimental regenerative braking system was designed and installed on an electric bicycle. The braking system relies on electric double-layer capacitors (EDLC), also known as ultracapacitors, to store the braking energy from the electric bicycle hub motor.

Pulsed Class-G Rf Amplifier System, Kevin Maulhardt, Kevin Haskett

Electrical Engineering

No abstract provided.

Phase Splitter Guitar Effects Pedal, Jerry Gough

Electrical Engineering

The goal of this project was to create a unique type of guitar distortion effects pedal. The initial plan was to use a Hilbert Transformer, also called a Phase Splitter, to produce a vibrato type distortion. Later during the circuit design phase, it appeared that a tremolo effect could be easily implemented in addition to the vibrato. Both the tremolo and vibrato effects were implemented in the final design. Although there are many different types of vibrato and tremolo pedals already in existence, it does not appear that any current designs use a Hilbert Transformer or phase splitter. Hopefully, this …

Dc House Model Design And Construction, Mark Cabaj

Electrical Engineering

Approximately 1.6 billion people currently live without electricity. The only sensible solution to their energy problems is the use of renewable energy in an off-grid, autonomous home which is powered directly by direct current, rather than alternating current coming from a power line, which probably cannot be found nearby. The purpose of this project is to construct a prototype of the DC House. More specifically, this project focuses on the development and construction of the power distribution system of the DC House. The system will be put in place starting from the source side model down to the load side …

Solar Powered Led Lantern For Developing Countries, Lacy Billingsly Iii

Electrical Engineering

In recent years, both LED and solar technology have become the focus of sustainable energy. LED lighting uses significantly less power than its fluorescent competitor. Solar cells enable clean, natural, and portable power. As these two entities become more efficient at exponential rates, the hope for the wide use of off-grid lighting in less developed countries seemingly increases at the same rate. Currently, there has been a development of industry for portable solar powered lighting systems. Before designing a product, a study was conducted of current products on the market that aim to light dark homes. This study and design …

Iphone Breathalyzer: Point Oh Wait!, Gurpal Bhoot

Electrical Engineering

This final year project combines hardware and software components to create an alcohol breathalyzer that is compatible with the iPhone. The final design of the circuit and the iPhone application is original and combines multiple components to create the final product. Most of those components are seen in a simplified version of a breathalyzer, while the added components take care of the interface to the iPhone.

12 Volt Wall Outlet For The Dc House Project, Dylan Van Lant, Chenxi Zhang

Electrical Engineering

The purpose of this project is to build a DC-DC converter for the wall outlet of the DC House. This report focuses on the development of the DC -DC converter, and explains the design process as well as summarize the final results. The proposed system using the Buck or Step Down topology takes input voltage of 48V and output 12V at 100W. Results show the ability of the converter to fulfill such tasks while maintaining efficiency about 90% at all load.

Music Driven Graphical Visualization System, Glenn Bruner

Electrical Engineering

In today’s society, we are able to enjoy listening to music on an assortment of high-tech devices such as home computers, or multimedia players, or personal audio players. A common characteristic of typical audio media players is that they lack the ability to provide visual stimulation in addition to the provided audio stimulus. Large public events, such as concerts, could be enhanced if they included visual effects in addition to audio stimulation. The goal of this project is to provide a graphical visualization that is automatically synchronized to an audio signal with a goal of enhancing the overall musical experience. …

Foce Intermodule Communications System, Roland Quiros

Electrical Engineering

Done in conjunction with Chad Kecy of the Monterey Bay Aquarium Reasearch Institute (MBARI), this project is an expansion of the Free Ocean Carbon Emission (FOCE) project. This iteration created a communications protocol between the different modules in an expandable array of PIC24-based boards.

Frg Turbojet, Tyler Vitti

Computer Engineering

Members of the Cal Poly SLO campus club FRG work together with students of several different disciplines to build a functional turbojet engine. Engineering approaches include design, fabrication, testing, and computer sensing, control, and integration. The goal of the project is to produce a running turbojet engine monitored and controlled by embedded hardware and specialized PC software. This project is to be used by later groups for further research and development.

Development Of A Ground Based Atomic Oxygen And Vacuum Ultraviolet Radiation Simulation Apparatus, Max Jay Glicklin

Master's Theses

The space environment possesses numerous unique and unusual attributes, creating challenges that must be considered in order to accomplish a successful space mission. Two of the detrimental aspects of the space environment include Atomic Oxygen, AO, and Ultraviolet, UV, radiation. UV radiation becomes more severe in space as there is no atmosphere to attenuate incoming photons, thereby exposing spacecraft to radiation that never reaches the surface of the Earth. Overall, space vehicles are exposed to a total of 107.4 Watts/m² of light shorter than 400 nm. AO is created by the photo disassociation of molecular oxygen by UV radiation …

A Kinetic Study Of Anti-Vegf-A Polyclonal Antibodies And Anti-Vegf-A Ssdna Aptamers, Heather A. Hedeen

Master's Theses

A new detection reagent that could possibly augment or replace antibodies research and diagnosis methods are aptamers. Aptamers are ssDNA, RNA or polypeptide constructs that function like active antibodies. Antibodies and aptamers both specifically bind to selected target molecules, and as such they enable the detection or targeting of the presence or absence of a specific antigen.

In order to ensure that ssDNA aptamers perform similarly to antibodies, anti-VEGF-A polyclonal antibody and anti-VEGF-A ssDNA aptamer were evaluated against vascular endothelial growth factor A (VEGF-A) using Surface Plasmon Resonance (SPR). It was hypothesized that the anti-VEGF-A aptamer had the same, if …

Uniting The Nation's Power Grids: Opening Markets To Integrate Large Scale Renewable Power, Jeffrey Kenneth Wilkinson

Master's Theses

As renewable energy becomes increasingly cost competitive and Renewable Portfolio Standards (RPS) push states to produce more and more of their steadily growing power demands from renewable sources, the need to solve the problems associated with renewable penetration becomes a priority. The intermittent nature of solar and wind power generation require additional cost that inhibit their implementation as penetration levels grow. Reliability remains power utilities' top priority while they struggle to upgrade their systems. Old generation facilities will be decommissioned, renewable energy projects will come on line and transmission upgrades become inevitable. Variability on the grid is currently mitigated through …

Registering An Amateur-Built Light Sport Kit Aircraft, Kevin Condron

Aerospace Engineering

No abstract provided.

Testing And Validation Of An Autostainer, Nicholas Hanne

Biomedical Engineering

Histology performed by Cal Poly students for research projects and labs are currently performed by hand using a dipping technique. This technique is time consuming, expensive, imprecise, and often unrepeatable. Central Coast Pathology donated a Dako Autostainer to the Biomedical Engineering Department that can perform immunohistological stains of up to 48 samples simultaneously using tightly controlled reagent volumes and incubation times. Protocols are programmed into the machine and can be repeated under the same conditions every time with minimal preparation and exposure to potentially dangerous reagents. The autostainer was repaired and validated by comparing PECAM & BBI stains performed on …

Esem Analysis Of Mice Femurs With Varying Sost Levels, Patrick K. Mcclay

Biomedical Engineering

This project’s goal was to analyze the properties of the cortical femur on 100 mice bones from Lawrence Livermore National Laboratory. Analysis was limited to imaging which determined the ratio of bone volume to total volume (BV/TV) and osteocyte lacunae density. Mice were altered to knock out their SOST gene: a negative regulator of bone formation. Twelve groups were created to differentiate their treatment, duration, and phenotype. Transgenic (TG) mice had an overexpression of the SOST gene: they carried a bacterial artificial chromosome. Mice with limb defects (DEF) were the offspring of two TG mice and carried twice the amount …

Robotron, Fabian Rodriguez, Oscar Daniel Muneton, Adelaido Jimenez

Computer Engineering

Roborodentia 2012 is a competition where students and alumni could build an autonomous robot to perform a certain task for points. This report is about Robotron, the 3rd place winner of this competition, and how it came to be.

California Polytechnic State University Senior Project Winter-Spring 2012, Roborodentia Xvii, Stack-E, Alejandro Ignacio, Austin Hobbs

Computer Engineering

The main goal for our project is to design and build a functional autonomous robot that is capable of navigating an open arena while avoiding obstacles, as well as identify other objects or cans on the field. It must also be capable of stacking and containing these cans. Deliverables will include the fully assembled robot chassis containing the essential hardware components needed to accomplish the navigation and movement, as well as capabilities like identification of objects and stacking of cans. Alongside the hardware, there will also be software developed to showcase these capabilities of the robot design, including the vision …

Corrosion Of Stainless Steel 316l And Astm F75 Cobalt Chromium Alloy During Immersion Testing In Silver Salt Solutions, Meagan Higgins

Materials Engineering

This study evaluates the potential effects of silver salts on biocompatible metals used for prostheses during the chemical reduction process to produce a silver antimicrobial layer on the metal’s surface. Samples of two biocompatible metals were obtained: Stainless Steel 316L and ASTM F75 Cobalt Chromium Alloy. Three different silver salts were also acquired: silver nitrate, silver sulfadiazine, and silver chloride. Specimens of each metal were cut to size using a 4-1/2 inch aluminum oxide, 40 grit, cut off wheel for metal, attached to a Dewalt Angle Grinder. The biocompatible metal samples were then subject to either Solution 1, water with …

Design, Construction And Testing Of A Walnut Cracker, Michael Dasso

BioResource and Agricultural Engineering

This senior project involves the design, construction and testing of a walnut cracker for Beecher Lane Walnut of Stockton California. This prototype cracker is one piece of a walnut processing system to package walnuts. Beecher Lane Walnut currently utilizes a conical cracker design whereas this new design entails a twin barrel configuration.

The goal of this project was to design, construct and test a prototype walnut cracker that would help determine the variables necessary to yield the highest percentage of walnut halves.

The testing of this walnut cracker involved two varieties: Eureka and Chandler. Testing indicated the optimal output of …

Design And Fabrication Of A Concrete Washout Bin, Bryce Allen Dafonte

BioResource and Agricultural Engineering

The project encompassed the design and fabrication of a concrete washout bin. The design parameters were provided by feedback from multiple professors who have used the current concrete washout area, and would like a newer, more effective washout bin to use for multiple lab sessions throughout the school year. The concrete washout bin needed to be large enough to hold excess amounts of waste materials, yet include a low profile to aid the students in being able to clean multiple mixers and tools. A liner will be held in place to ensure that water does not leak out, but also …

Solid Set Sprinkler Design For An Apricot Orchard, Kyle Moeller

BioResource and Agricultural Engineering

The goal of this project was to design a solid set sprinkler system as well as a cost analysis for a 60 acre field. This allows for water to be distributed throughout an entire field at low flow rates allowing water to be used more efficiently and effectively. Completing a design such as this will allow some cost saving by the farmer throughout the systems use.

Implementation, Design, And Cost Analysis Of A Concrete Washout System, Omar Adina

BioResource and Agricultural Engineering

With the increase of environmental pollution in today’s world, many strategies and regulations are being enforced. These enforcements come from the state and federal governments, but public awareness is often overlooked. Stormwater regulations here in California have dramatically changed over the last decade, as the topic is investigated more often.

This senior project encompassed the design prototype and cost analysis of a permanent concrete washout station for the BioResource and Agricultural Engineering Department at California Polytechnic State University, San Luis Obispo. The design parameters given were to construct a steel bin for the excess concrete to be dumped into during …

Design Of Dc Light Bulb For The Dc House Project, Kent Chin Liang

Master's Theses

This thesis focuses on the design and implementation of an economical and energy efficient DC Light Bulb for the DC House Project. For the DC lighting system, emphasis is on the DC-DC LED driver, dimmer circuit, LED lighting array, and physical packing design. In this paper, a DC Light Bulb is designed, simulated, and tested to operate at a wide input voltage ranging from 24 VDC to 72 VDC, to be fully dimmable using pulse-width modulation technique, and to produce lumination intensities equivalent to a standard 100 W A19 incandescent light bulb at one-tenth the total power consumption. The DC …

Day/Night Band Imager For A Cubesat, Eric Stanton

Electrical Engineering

Day/Night Band (DNB) earth sensing and meteorological systems like the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) provide visible wavelength imagery 24 hours a day that is used primarily for cloud imaging in support of weather forecasting. This paper describes a compact push-broom imager that meets low light imaging requirements for DMSP OLS and the NOAA/NASA Joint Polar Satellite System (JPSS) as documented in the Integrated Operational Requirements Document [1] (IORD) including the imager design, system level concepts of operation for data collection, radiometric and spatial calibration, and data transmission to Earth. This small, lightweight imager complies with …

Reliable Software Updates For On-Orbit Cubesat Satellites, Sean Fitzsimmons

Master's Theses

CubeSat satellites have redefined the standard solution for conducting missions in space due to their unique form factor and cost. The harsh environment of space necessitates examining features that improve satellite robustness and ultimately extend lifetime, which is typical and vital for mission success. The CubeSat development team at Cal Poly, PolySat, has recently redefined its standard avionics platform to support more complex mission capabilities with this robustness in mind. A significant addition was the integration of the Linux operating system, which provides the flexibility to develop much more elaborate protection mechanisms within software, such as support for remote on-orbit …

Compulsator Design For Electromagnetic Railgun System, Bryan Bennett

Electrical Engineering

This project designed, fabricated, and partially tested a compensated pulsed alternator (compulsator) to power an electromagnetic rail gun (EMRG) in a multidisciplinary team. The EMRG team includes two master’s AERO students, two senior EE students, and three senior ME students. Design of the compulsator began with research through conference and research papers. This design was changed throughout the project as system analysis and component testing exposed unforeseen system limitations. While original specifications were not met, all fabricated components but one, the stator, were completed using Cal Poly’s facilities and the project’s limited available budget. Experimental verification of calculations and system …

Hearst Hydroelectric Generation Facility, Anthony Schifano, Richard Wright, Nick Buchanan, Corey Nakai, Joshua Rutheiser

Electrical Engineering

This project proposes a power plant design that provides a supplemental source of electricity for appliances, machinery, and lighting at Hearst Castle and Ranch. The design concept includes a turbine-generator combination to convert kinetic and gravitational potential energy from the existing water distribution system to electrical energy: also known as a hydroelectric plant. The electrical distribution system from the plant to the local grid takes advantage of power flow techniques utilized in current research and industry.

Rfid Check-In System For Safe Routes To School At Hawthorne Elementary, Paul Banel

Electrical Engineering

The system uses a low frequency Radio Frequency Identification (RFID) reader and passive RFID tags to help the Safe Routes to School program at Hawthorne Elementary in San Luis Obispo track the number of children who participate in the program. Children will carry passive RFID tags and scan them at the reader each morning that they walk or bike to school. The system tracks the total number of students that walk and bike each day, as well as the number of times each individual child participates over the course of many days. The Safe Routes program hopes to use this …

Printed Electroluminescent Display, Christopher (Chris) James Nixon, Veronica Kopp

Electrical Engineering

Electroluminescent displays are part of an emerging technology known as printed electronics. Most identify printed electronics with purely electronic purposes such as the Radio frequency identification (RFID). Now the electronics and graphic communication industries have come together to create of new forms of products that interact with customers. Flexible, electronic circuits use functional inks and traditional printing methods such as screen printing, gravure, and inkjet. Printed electronics are perfect for low performance applications, such as displays, labels, clothing and batteries. This paper focuses on creating an interactive electroluminescent (EL) display. In selling a product, displays are important because most customers …