Engineering Commons^™

Juxtaposing Nasa’S Aeronet Aod With Carb Pm Data Over The San Joaquin Valley To Facilitate Multi-Angle Imaging Spectroradiometer (Misr) Pm Pollution Research, John Kanemoto

STAR Program Research Presentations

Airborne particulate matter (PM) has been shown to increase the risk for asthma, chronic bronchitis, cardiopulmonary complications, and respiratory cell membrane damage/infection/leakage. PM levels are currently analyzed from two perspectives: stationary land-based monitoring (LBM) sites and total Aerosol Optical Depth (AOD) atmospheric column measurements. Both perspectives often leave miles of space between measuring locations and will have a continually increasing cost from introducing/maintaining sites. The Multi-angle Imaging SpectroRadiometer (MISR) satellite team hopes to begin investigating/archiving PM levels comprehensively via inputting MISR AOD measurements into a function/model which predicts the amount of ground level PM.

In the future, multivariable spatial correlations …

Risk Assessment Model For Pipe Rehabilitation And Replacement In A Water Distribution System, Jan C. Devera

Master's Theses

The efficient delivery of potable water for a community through its distribution system has historically been the backbone of nearly all metropolitan developments. Much of these systems are comprised of pipe networks made of various materials including concrete, iron, PVC, and even steel. As these communities expand and urbanize, water demand and population density simultaneously increase. This develops higher strains and stresses in the community‟s water distribution network causing pipes to corrode, crack, or rupture prematurely while in service. As a result, the deterioration of water distribution systems in growing cities is increasingly becoming a major concern for our nation. …

The Effects Of Variation In Collagen D-Spacing On Compact Bone Viscoelasticity: A Finite Element Analysis, Miguel A. Mendoza

Master's Theses

The D-spacing that is characteristic of collagen and its structural arrangement was previously thought to be a constant value. Much research is revealing that it is actually a distribution of values in biological tissues. Recent ovine experimentation has also shown that the D-spacing distribution is significantly altered following estrogen depletion. While ewes contain some major biological differences between their human counterparts, they are an economical and robust large animal model for postmenopausal osteoporosis. So, the exploration of the possible implications that D-spacing has on the mechanical properties of the whole bone utilizing animal models and computational methods is warranted. Six …

A Study Of The Collisional Evolution Of Orbital Debris In Geopotential Wells And Geo Disposal Orbits, Christina R. Diaz

Master's Theses

This thesis will present the effects of the orbital debris evolution in two key areas: the geosynchronous disposal orbit regime known as “graveyard” and the two geopotential wells found in 105◦ W and 75◦ E longitude bins. After developing a GEO specific orbit propagator for NASA Johnson Space Center’s Orbital Debris Of- fice, collisions were simulated throughout these regimes using a low velocity breakup model. This model considered the effects of perturbations particularly non-spherical Earth effects (specifically sectorial and zonal harmonics), lunar effects, third body effects and solar radiation pressure effects. The results show that CDPROP does well in simulating …

The Feasibility And Application Of Observing Small Leo Satellites With Amateur Telescopes, Brock Schmalzel

Master's Theses

This thesis demonstrates that any individual can provide relevant observational data to further research efforts within the Aerospace community, through the use of amateur telescopes. A Meade LX200 12 in. telescope and Lumenera Skynyx 2.0 camera were utilized to observe small LEO satellites, using a well-documented point-and-wait staring method. Over a period of three months, a total of 186 observation attempts were made resulting in 97 successful captures. From the gathered data, three possible aerospace applications were analyzed: validation of a satellite brightness prediction model, angles-only orbit determination including extended Kalman filtering, and temporal error growth in TLE-based orbit propagation. …

Material Characterization Of Nitinol Wires For The Design Of Actuation Systems, Sean P. Kennedy

Master's Theses

A series of tests were performed on nickel-titanium alloy wire, also known as nitinol, to determine the plausibility of designing an actuator using this wire as the method of actuation. These tests have been designed to fully characterize how the wire behaves under steady state and transient conditions allowing for a specific wire selection to be made given known actuator specifications which will result in an efficient design. The wire transient data can be used to design a controller which reduces the actuation time. The research done for the overall project covers a wide scope including wire hysteresis, nitinol transition …

Utilizing Atcs Data To Inform A Dynamic Reassignment System For Muni Metro Light Rail Vehicles Departing Embarcadero Station, April M. Hickey

Master's Theses

This is a report of a professional project intended to act as an informational tool for the evaluation of a dynamic dispatch system at Embarcadero Station for the San Francisco Municipal Transportation Agency (SFMTA). Systems that operate dispatch algorithms do so in response to on-time performance and reliability. The optimization problem is documented in many transportation contexts including airline networks, bus dispatch, and freight routing. According to the research, optimizing available options and re-routing based on available options can create a more efficient system that would minimize operating costs and improving service reliability for customers.

The methodology presented here uses …

System Design Considerations And The Feasibility Of Passively Compensated, Permanent Magnet, Iron-Core Compulsators To Power Small Railgun Platforms, Collin Taylor Macgregor

Master's Theses

This thesis provides insight into the different aspects of compulsator design for use with railgun systems. Specifically, the design space is explored for passively compensated, permanent magnet iron-core compulsators. Seven design parameters are varied within a compulsator model developed for the Cal Poly Compulsator (CPCPA). The Matlab code for this model is included within the appendix. Efforts were made to compare and validate this compulsator model to published data from existing systems. The compulsator model was found to match closely with discharge pulse length, but resulted in lower values for peak current and projectile velocity by 50% and 30% respectively …

A Lateral Flow Smart Phone Image Analysis Diagnostic, Christina Holly Tyrrell

Master's Theses

A low cost compact diagnostic has many implications in today’s society. Smart phone technology has exponentially grown and with it the imaging capabilities associated with smart phones. The goals of this research are i) to determine the feasibility of combining in the field smart phone images with color dependent assay results, ii) to develop a MatLab® image analysis code to analyze these results, and iii) compare limits of detection between the un-aided eye and MatLab® image analysis software.

Orange G dye is used to create a stock solution and subsequent titers for analysis. Autocad is used to design an assay …

Thermal Analysis Of A Monopropellant Micropropulsion System For A Cubesat, Erin C. Stearns

Master's Theses

Propulsive capabilities on a CubeSat are the next step in advancement in the Aerospace Industry. This is no longer a quest that is being sought by just university programs, but a challenge that is being taken on by all of the industry due to the low-cost missions that can be accomplished. At this time, all of the proposed micro-thruster systems still require some form of development or testing before being flight-ready. Stellar Exploration, Inc. is developing a monopropellant micropropulsion system designed specifically for CubeSat application.

The addition of a thruster to a CubeSat would expand the possibilities of what CubeSat …

Constructing And Optimizing A Single Wafer Solar Cell Array In The Microfabrication Lab At California Polytechnic State University At San Luis Obispo, Rod Marstell

Master's Theses

CONSTRUCTING AND OPTIMIZING A SINGLE WAFER SOLAR CELL ARRAY IN THE MICROFABRICATION LAB AT CALIFORNIA POLYTECHNIC STATE UNIVERSITY AT SAN LUIS OBISPO

Solar cells are more and more becoming a significant source of energy in the world today. They are used to power entire buildings as well as small devices and everything in between, and are utilized all around the world. Smaller solar devices, such as hearing aid battery chargers, cost a lot of money relative to the monetary wealth in third-world countries. For this purpose, a less expensive, more efficient solar cell array should be developed.

This study contains …

Weighing The Financial And Sustainable Benefits Of High Performance Structures In Seismically Active Regions, Alia Talina Barajas

Master's Theses

This thesis investigated the potential advantages and disadvantages of high performance structures by comparing the financial and environmental impacts of a performance based four-story office building to one designed to meet minimum code-level requirements.

To generate a comparison, the lateral system of a four-story structure utilizing buckling restrained braced frames was designed to meet code-level requirements per the American Society of Civil Engineers’ Minimum Design Loads for Buildings and Other Structures (ASCE 7-05) and again to meet the immediate occupancy criteria defined by ASCE 41-06 Seismic Rehabilitation of Existing Buildings. The following was then performed:

• Test the structural performance of …

Metamaterial Enhanced Wireless Power Transmission System, Travis Jade Heffernan

Master's Theses

Nikolai Tesla's revolutionary experiments demonstrated the possible benefits of transmitting power wirelessly as early as 1891. Applications for the military, consumers, emergency personnel, remote sensors, and others use Tesla’s discovery of wireless power. Wireless power transmission (WPT) has the potential to be a common source of consumable energy, but it will only receive serious consideration if the transmit and receive systems are extremely efficient and capable of delivering usable amounts of power. Research has been conducted to improve the efficiency and performance of nearly every aspect of WPT systems, but the relatively new field of metamaterials (MTMs) has yet to …

Surgical Tooling Designed For The Direct Anterior Approach To Total Hip Arthroplasty, Jon-Peter Meckel

Master's Theses

Surgical Tooling Designed for the Direct Anterior Approach to Total Hip Arthroplasty Jon-Peter Meckel

Total hip arthroplasty (THA) is becoming more and more common in the US as people continue to live longer and more active lives. The main reason that a THA is required is due to the “wear and tear” affliction of osteoarthritis, which in the year 2000 had at least 3% of the population over 30 showing symptoms. A revitalized approach to THA is the direct anterior approach, or Smith-Petersen approach, which limits the amount of musculature affected by the surgery and creates a very stable joint …

Microphone-Based Pressure Diagnostics For Boundary Layer Transition, Spencer Everett Lillywhite

Master's Theses

An experimental investigation of the use low-cost microphones for unsteady total pressure measurement to detect transition from laminar to turbulent boundary layer flow has been conducted. Two small electret condenser microphones, the Knowles FG-23629 and the FG-23742, were used to measure the pressure fluctuations and considered for possible integration with an autonomous boundary layer measurement system. Procedures to determine the microphones’ maximum sound pressure levels and frequency response using an acoustic source provided by a speaker and a reference microphone. These studies showed that both microphones possess a very flat frequency response and that the max SPL of the FG-23629 …

Creating Exact Bezier Representations Of Cst Shapes, David D. Marshall

Aerospace Engineering

The paper presents a method of expressing CST shapes pioneered by Kulfan into standard Bezier curves and surfaces. Out of the seven standard shape classes identified by Kulfan as representable using CST curves, four of them, including airfoils, can be represented as Bezier curves exactly. For the other three, a convergent series expansion proves insufficient to achieve any practical accuracy, however these three classes are not the most commonly used of the CST classes. With the ability to express most common CST curves and surfaces as generic Bezier curves and surfaces, CST shapes can be used in CAD, solid modeling, …

Project Based Learning In Engineering Economics: Teaching Advanced Topics Using A Stock Price Prediction Model, Lizabeth Schlemer

Industrial and Manufacturing Engineering

A graduate level advanced engineering economics class taught at California Polytechnic State University, San Luis Obispo, includes a thorough review of time value of money, investment evaluation, inflation, risk and return, financing decisions, corporate investment strategies, risk analysis and decisions incorporating non-monetary considerations. Historically this course was taught using an advanced text where the topics were covered sequentially. A redesign of the course now includes the construction of a stock price prediction model for a company of the student’s choice. Through the model, the topics are covered and discussed in the context of the large model-building project. For instance, inflation …

Incorporating Active Learning Into A Thermal System Publications Lecture, Jennifer M. Peuker, Steffen Peuker

Mechanical Engineering

Many mechanical engineering departments offer a thermal system design (or similar) course for senior students. Some courses have a laboratory component, but many are a lecture only format. This paper demonstrates how active learning—through virtual labs, a semester long project, and in-class assignments—was incorporated into the lecture portion of a thermal system design course to enhance learning and provide the students a laboratory experience without a physical laboratory. These active learning ideas can also supplement the learning during lecture for those courses which have a designated laboratory time. Anecdotal evidence of the activities indicates that students were engaged and enjoyed …

Effect Of Multiple Choice Testing On Student Performance In An Introductory Engineering Course, Jennifer M. Peuker, Jennifer Mcferran Brock, Steffen Peuker

Mechanical Engineering

This study aims to compare student performance on introductory engineering statics material by comparing the exam scores of students who are given both multiple choice (MC) questions and constructed response (CR) questions to see whether the type of exam question makes a difference in student performance and understanding. Seventy-five students in an introductory engineering course did either a MC version or a CR version of each statics problem, resulting in MC answers and a control group of CR answers to each statics problem. The students were also polled for feedback regarding their preferences of test question format at the end …

Student Industry Cooperation For The Development Of Thermal System Design Teaching Laboratory Equipment, Steffen Peuker

Mechanical Engineering

In higher education, hands-on undergraduate education using state-of-the-art laboratory equipment is important to meet the quality standards expected in the engineering profession. However, the development of modern engineering laboratories is not only time consuming, but also budget constraints can hamper the development of needed laboratories for instructional purposes as Bidana and Billo state: "Development of state-of-the-art engineering laboratories is becoming an increasing problem in the University environment. Due to the greater variety and increased complexity of much state-of-the-art hardware and software, the cost and cycle time for development and startup of a modern engineering laboratory can be excessive. This, together …

Mechanical Properties And Microstructures Of Incoloy 909 Rolled Rings Subjected To A Modified Forging Cycle, Colin Lee Elliott Glaves

Materials Engineering

The microstructure of rolled rings of Incoloy 909 nickel-iron-cobalt superalloy subjected to a standard customer solution and aging treatment exhibited unacceptably large grains. Samples cut from a failed ring were mounted and polished for analysis. The samples were etched with a modified Kalling’s waterless reagent and metallographic analysis was done to identify characteristic large grain structures distributed among the desired smaller grain structures. The large grains were identified and noted for comparison to later samples. Two test rings were forged out of Incoloy 909 using revised forging procedures involving reduced soak temperatures before each forging step. Metallographic samples were cut …

Control System Infrastructure For The Cal Poly Human Powered Helicopter: Upturn Ii, Douglas A. Thornber, Samuel J. Wahyou

Aerospace Engineering

The Upturn was donated to Cal Poly in October 2012 by Neal Saiki from NTS. Our project was to replicate the old system to decrease the turn-around time in case of a crash during a test flight. The control system for the Upturn II was designed with the same considerations that were used for the Upturn. The result we got was inconclusive for the sensor selection, the new control system is heavier than the old system, and we couldn’t validate the system without doing a flight test. For the next iteration if some of the replication requirements are relaxed the …

Ramjet Combustion Chamber, Paul Cameron Stone

Aerospace Engineering

A ramjet combustion chamber is designed and some initial assembly fabrication and test completed as a component of a ramjet graduate project for California Polytechnic State University, San Luis Obispo Supersonic Wind Tunnel. The combustor design is driven by a theoretical model created by a Cal Poly graduate student, Harrison Sykes. Temperature, pressure, and fuel flow will be measured.

The Effects Of Fabrication Methods And Cure Cycle On The Mechanical Properties Of Carbon Fiber Laminate In Tensile And 3-Point Bend Testing, Adriano Agostino

Aerospace Engineering

This project was completed at the California Polytechnic State University, San Luis Obispo Aerospace Engineering Structures and Composites Lab during Spring Quarter 2013. The purpose of this project was to research and to gain insight into the effects of fabrication methods and of modifying cure cycles for Newport NB-301 12l 2x2 Twill Weave Carbon Fiber material properties. The two fabrication methods used were autoclave and heat press (compression molding) methods. Each fabrication method used two cure cycles, a recommended cure cycle of 275°F for 1 hour and a modified cure cycle of 250°F for 1.5 hours. The exact product data …

Design And Fabrication Of A Ramjet Engine, Clinton C. Humphrey

Aerospace Engineering

In this report, the design and fabrication of the inlet to a ramjet engine is described. The inlet utilizes a single ramp and single sided three shock internal compression to slow the airflow from supersonic to subsonic speeds while providing maximum stagnation pressure to the combustor. The optimum angle for the inlet ramp is calculated to be 10° and it decelerates the airflow from Mach 3.3019 to Mach 0.5438. The stagnation pressure increases from 150 psi to 4.67 ksi. The material of the inlet is composed primarily of low carbon mild steel to accommodate the high pressure of the inlet.

Feasibility Of Cubesat Formation Flight Using Rotation To Achieve Differential Drag, Skyler M. Shuford

Aerospace Engineering

This paper presents the results of a study conducted to understand the feasibility of CubeSat formation flight. The mechanism for separation and formation studied was differential drag, achieved by rotating the CubeSats to give them different cross-sectional areas. Intuitively, lower altitude orbits provide much higher separation effects. Although the most influential orbital effects occur with maximum and minimum cross-sectional areas, an attitude-controlled and a tumbling CubeSat may provide enough differential drag to meet separation requirements of a mission. Formation flight is possible, but due to the non-linearity of the system, gain scheduling may be the most effective method of long …

Proof Of Concept For Propeller Performance Testing In The Cal Poly Wind Tunnel, Alex N. May, Clayton R. Green, Clinton J. Kirsop, Jason A. Schupp

Aerospace Engineering

The goal of this experiment was to execute a proof of concept for a potential propulsion systems laboratory. During the course of this experiment, a data acquisition system was designed, built, and tested in order to collect data from the Cal Poly 3x4 ft draw-down wind tunnel. By operating a brushless outrunner motor and propeller on the sting mount, data was collected for thrust, torque, RPM, current, voltage, and tunnel velocity. By obtaining data for each of these performance metrics, trends were analyzed to confirm the concept and apparatus was functional. The results of the experiment revealed that the concept …

Nozzle Design For The Supersonic Wind Tunnel Ramjet Attachment, Andrew Michael Carter

Aerospace Engineering

This document outlines the concept, design, and manufacturing stages of the nozzle section to the Ramjet Attachment. This project is a subsidiary of the thesis, Baseline Performance of Ramjet Engine”, developed by Harrison Sykes. The nozzle geometry is based off of theoretical calculations using Isentropic and Rayleigh line flow relations for a two-dimensional cross section. The nozzle sees an inlet temperature of 953 degrees Fahrenheit, pressure of 28 psi, and a Mach number of 0.356 after the combustion chamber. The nozzle section is a two foot long converging diverging nozzle to choke and accelerate the flow to achieve an exit …

Redesigned Aerospace Control System Platform For Laboratory Re-Purposing, Ryan W. Moskaluk

Aerospace Engineering

This senior project encompasses using an aircraft model in conjunction with the 3' by 4' low speed wind tunnel at Cal Poly San Luis Obispo. The aircraft model is controlled through piezoelectric actuators embedded inside the flexible tail structure via a PID controller. The objective for this project is to demonstrate the effect of tuning the individual PID controller gains with the aircraft model inside the low speed wind tunnel and to create an easy to use graphical user interface for doing so.

Exploring A High-Tech Approach To Subterranean Dwelling Environments For Commercial Implementation, Matthew Richard Gordon

Industrial and Manufacturing Engineering

People are always looking to experience something interesting and unique when on vacation. What could be more unique than staying in a hotel that is completely underground? While people have always been amazed at natural caves and other subterranean structures, the idea of spending the night in one of these is a somewhat untried area, although it could be quite the selling point. This being the case, the idea of a subterranean hotel is not so farfetched, however there are a number of issues that arise with this project. These issues include construction and selecting the proper site and building …