Engineering Commons^™

Stability Analysis Of Negative Resistance-Based Source Combining Power Amplifiers, Hannah S. Homer

Master's Theses

An investigation into the stability of negative resistance-based source combining power amplifiers is conducted in this thesis. Two different negative resistance-based source combining topologies, a series and parallel version, are considered. Stability is analyzed using a simple and intuitive broadband approach that leverages linear circuit stability criterion and two different linearization methods: linearization around the operating point and in the frequency domain. Using this strategy, it is shown that conditions for self-sustained oscillation exist for both topologies. For the series combining topology, self-sustained oscillation is prevented by means of injection locking.

Development And Validation Of A Tibiofemoral Joint Finite Element Model And Subsequent Gait Analysis Of Intact Acl And Acl Deficient Individuals, Nicholas Czapla

Master's Theses

Osteoarthritis (OA) is a degenerative condition of articular cartilage that affects more than 25 million people in the US. Joint injuries, like anterior cruciate ligament (ACL) tears, can lead to OA due to a change in articular cartilage loading. Gait analysis combined with knee joint finite element modeling (FEM) has been used to predict the articular cartilage loading. To predict the change of articular cartilage loading during gait due to various ACL injuries, a tibiofemoral FEM was developed from magnetic resonance images (MRIs) of a 33 year male, with no prior history of knee injuries. The FEM was validated for …

Beverage Dispensing Backpack Design And Business Plan, Sterling Blake Grande

Biomedical Engineering

Grande Beverage Equipment

Mission Statement:

To deliver beverage dispensing products, services, and solutions to our customers in innovative and cost effective ways.

Product:

We provide portable beverage dispensing backpacks that can deliver soda or beer from pressurized tanks.

Self-Contained Breathing Apparatus For Firefighter With A Permanent Stoma, Jason Delgadillo, Aaron Wheeler, Zachary Wishbow

Biomedical Engineering

The purpose of this project was to create a unique SCBA (self-contained breathing apparatus) for a firefighter named Chris Gauer. This prototype consists of a SCBA headgear connected to a polycarbonate-formed stoma mask with a medical-grade sanitary silicone hose.

Sense And Avoid Uas Project Final Design Report, Katie Peticolas, Cesia Cazares, Trevor Elsbree, Courtney Smith, Herberth Elie Navas

Biomedical Engineering

No abstract provided.

Warpage And Shape Distortion In Laser Metal Sintering, Xuan Wang

Industrial and Manufacturing Engineering

Selective Laser Sintering (SLS) is the primary method to fabricate metal and ceramic components in additive manufacturing. Due to the anisotropy of powder material, the sintering rate difference will inevitably causes shape change, distortion , and other defects of sintered parts. In this paper, a continuum model was developed to simulate the SLS process. The developed model has been successful to predict sintering kinetics. The impact of processing parameters, such as laser power, scanning speed, hatching distance, and particle size has been studied . The proposed method provides an innovative tool to optimize SLS process parameters.

Waste Heat Generation: A Comprehensive Review, Nazli Yeşiller, James L. Hanson, Emma H. Yee

Civil and Environmental Engineering

A comprehensive review of heat generation in various types of wastes and of the thermal regime of waste containment facilities is provided in this paper. Municipal solid waste (MSW), MSW incineration ash, and mining wastes were included in the analysis. Spatial and temporal variations of waste temperatures, thermal gradients, thermal properties of wastes, average temperature differentials, and heat generation values are provided. Heat generation was influenced by climatic conditions, mean annual earth temperatures, waste temperatures at the time of placement, cover conditions, and inherent heat generation potential of the specific wastes. Time to onset of heat generation varied between months …

Computational Aerodynamic Analysis Of A Micro-Ct Based Bio-Realistic Fruit Fly Wing, Joshua Brandt, Graham Doig, Naomi Tsafnat

Aerospace Engineering

The aerodynamic features of a bio-realistic 3D fruit fly wing in steady state (snapshot) flight conditions were analyzed numerically. The wing geometry was created from high resolution micro-computed tomography (micro-CT) of the fruit fly Drosophila virilis. Computational fluid dynamics (CFD) analyses of the wing were conducted at ultra-low Reynolds numbers ranging from 71 to 200, and at angles of attack ranging from -10° to +30°. It was found that in the 3D bio-realistc model, the corrugations of the wing created localized circulation regions in the flow field, most notably at higher angles of attack near the wing tip. Analyses …

Improving Connectivity Between Members And Alumni Of Alpha Pi Mu, Ben Patrick Buell, Shannon Elizabeth O'Keefe

Industrial and Manufacturing Engineering

The purpose of this project was to solve the problems of a lack of connectivity between the current members and alumni of Alpha Pi Mu, as well as the lack of incentives for prospective members to join the club. These problems were solved by creating a website that allowed current members to be able to view the complete work experiences of alumni and provided a way to reach out to those alumni directly to network with them. The agile project management system was used to develop the website and helped to successfully complete all of our design requirements listed in …

Methodologies For Simplified Lifeline System Risk Assessments, Michael Germeraad

Master's Theses

Natural hazards are a growing risk across the globe. As regions have urbanized, single events impact greater proportions of the population, and the populations within those regions have become more dependent on infrastructure systems. Regional resilience has become closely tied to the performance of infrastructure. For a comprehensive risk assessment losses caused by lifeline outage must be considered alongside structural and nonstructural risks. Many well developed techniques quantify structural and nonstructural risk; however, there are insufficient procedures to determine the likelihood of lifeline outages. Including lifelines in seismic assessments will provide a comprehensive risk, improving a decision maker’s capacity to …

Cal Poly Electrical Distribution Coordination And Short Circuit Analysis, Alexander Gomez, Kaylynn Rothleder

Electrical Engineering

The purpose of this project is to maintain the California Polytechnic State University Electrical Distribution System by performing short circuit and protective device coordination studies for the Baker Science Building. When a short circuit arises in a system, there is no finite way in telling what protective device will be tripped, which can cause outages, arc flashes and electrical explosions. The best way in determining the outcomes of these occurrences are to perform precise simulated reports. To output these reports, design and analysis of the single line through a commercialized software, Power Tools for Windows (SKM) was used. To name …

Development Of A Tridimensional Measuring Application For Ipads, Michael Casebolt, Nicolas Kouatli, Jack Mullen

Computer Science and Software Engineering

In today’s fast-paced distribution centers workers and management alike are constantly searching for the quickest and most efficient way to package items for distribution. Even with the advancement of app-oriented solutions to a variety of problems across many industries there is a distinct unmet need in distribution environments for an application capable of increasing the efficiency and accuracy of packaging items. This senior project focused on the development and testing of an application utilizing the Structure Three Dimensional Sensor and a 4th generation iPad to scan an object or group of objects to be packaged and determine the overall dimensions …

Eight Degree Of Freedom Vehicle Model With Pitch, Yaw, Tire Control And Sensor Inputs, Sean T. Hirtle

Master's Theses

This research focuses on the development of an eight degree of freedom vehicle model in the MATLAB computing language. Its purpose is to provide flexibility in the modeling and implementation of signal inputs and crash avoidance logic while maintaining accuracy in the physics of the vehicle’s motion. Firstly, the equations of motion for the bodies involved under a reasonable set of assumptions were developed. Next the model was translated to computer code. By writing the model in SimuLink with *.m files, the modularity of the code is enhanced. To validate the model, several well defined tests were simulated.

To establish …

Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen

Master's Theses

Synthetic Aperture Radar (SAR) has come into widespread use in several civilian and military applications. The focus of this paper is the military application of imaging point targets captured by an airborne SAR platform. Using the traditional SAR method of determining target motion by analyzing the difference between subsequent images takes a relatively large amount of processing resources. Using methods in this thesis, target motion can be estimated before even a single image is obtained, reducing the amount of time and power used by a significantly large amount. This thesis builds on work done by Brain Zaharri and David So. …

Experimental Investigation Of Drag Reduction By Trailing Edge Tabs On A Square Based Bluff Body In Ground Effect, Scott R. Sawyer

Master's Theses

This thesis presents an experimental investigation of drag reduction devices on a bluff body in ground effect. It has previously been shown that the addition of end-plate tabs to a rectangular based bluff body with an aspect ratio of 4 is effective in eliminating vortex shedding and reducing drag for low Reynolds number flows. In the present study a square based bluff body, both with and without tabs, will be tested under the same conditions, except this time operating within proximity to a ground plane in order to mimic the properties of bounded aerodynamics that would be present for a …

Evaluating The Effectiveness Of Cranial Molding For Treatment Of Positional Plagiocephaly Using Finite Element Analysis, Maziyar Keshtgar

Master's Theses

Since the advent of recommendations for placing infants in the supine position during sleep to reduce the incidence of sudden infant death syndrome, clinicians have noted an increase in the frequency of cranial asymmetry due to deformation of suture sections of the infants’ skulls as a result of constant concentrated stress in one area at the back of their head. This specific form of cranial deformation is known as positional plagiocephaly and its rate of occurrence has increased from 0.3% in 8.2% within the past 30 years.

Current treatments and methodologies for preventing and correcting positional plagiocephaly such as stretching …

Descriptive Statistical Analysis Of Oshpd Quality Inspections On California Hospital Projects, Philip L. Barlow

Construction Management

California hospital construction projects are large, complex, and extremely difficult projects to execute and navigate successfully. One of the primary reasons for this is the OSHPD permit, review, and inspection process. The quality control rigor imposed by this third party inspection procedure has caused great angst amongst most general contractors and subcontractors. This study examined over 60,000 OSHPD inspections, spanning six California hospital projects and forty-one separate subcontractors. Specifically, this paper conducts descriptive statistical analysis on the total number of inspections conducted and the percentage of failed inspections (or re-inspections) that occurred. The analysis, conducted on major subcontractors working on …

Drip Hydraulics Program, Garret Blocher

BioResource and Agricultural Engineering

This senior project report lays out the production of drip hydraulics software composed in Microsoft Excel and backed by coding in Visual Basic for Applications. The program performs 2 main functions useful in the design of irrigation systems. The first is based on performing single hose computations under three different circumstances. It can solve for the average emitter flow rate given the hose inlet pressure, the inlet pressure given the average emitter flow rate, and can model hose pressures and flow rates while flushing. The second function is to place a manifold in the hydraulically optimum location on a slope. …

Iocean Rgb Sensor, Mark Mcneff, Archit Mendiratta

Electrical Engineering

The goal of this project is to create an accurate ocean color sensor that will communicate effectively with an iPhone. The device will take ocean color measurements at its current location and provide these measurements to the user for scientific study of the variability of ocean color across the globe. The data gathered by the device will also provide ground-truthing of satellite ocean color measurements.

Parker Hannifin Chainless Challenge 2014-15 Senior Design Project, Matt Pallotta, Nathan Klammer, Kemper Whaley, Jack Rechtin

Mechanical Engineering

California Polytechnic State University has been invited to compete in the Parker Hannifin Chainless Challenge Competition in 2014-15. Cal Poly has chosen a team of mechanical engineering students to take part. We have named our team “Bike Under Pressure” and all references as such refer to the team.

The challenge is to build a bicycle which does not have a solid mechanical connection between the power input of the rider to the power output of the wheel(s). After conducting research into different previous designs and brainstorming designs of their own, Bike Under Pressure developed two conceptual designs. One design featured …

20 Years Of Unsw Australia's Sunswift Solar Car Team: A New Moment In The Sun, But Where To Next?, Hayden Charles Smith, Sam Paterson, Clara Mazzone, Sammy Diasinos, Graham Doig

Aerospace Engineering

The Sunswift Solar Car project has been running at UNSW Australia in Sydney for 20 years as of 2015. It is an entirely student-run endeavour which revolves around the design and development of a solar/electric vehicle nominally designed to compete in the World Solar Challenge rally from Darwin to Adelaide every 2 years. The student cohort is drawn from a range of schools, disciplines and backgrounds, and the team has been increasingly successful and high-profile particularly in its second decade. The excellent level of hands-on training that the project provides to students is not rewarded with academic credit yet many …

Analysis Of A Low-Angle Annular Expander Nozzle, Kyll Schomberg, John Olsen, Graham Doig

Aerospace Engineering

An experimental and numerical analysis of a low-angle annular expander nozzle is presented to observe the variance in shock structure within the flow field. A RANS-based axisymmetric numerical model was used to evaluate flow characteristics and the model validated using experimental pressure readings and schlieren images. Results were compared with an equivalent converging-diverging nozzle to determine the capability of the wake region in varying the effective area of a low-angle design. Comparison of schlieren images confirmed that shock closure occurred in the expander nozzle, prohibiting the wake region from affecting the area ratio. The findings show that a low angle …

Techniques For Aerodynamic Analysis Of Cornering Vehicles, James Keogh, Tracie J. Barber, Sammy Diasinos, Graham Doig

Aerospace Engineering

When a vehicle travels through a corner it can experience a significant change in aerodynamic performance due to the curved path of its motion. The yaw angle of the flow will vary along its length and the relative velocity of the flow will increase with distance from the central axis of its rotation. Aerodynamic analysis of vehicles in the cornering condition is an important design parameter, particularly in motorsport. Most racing-cars are designed to produce downforce that will compromise straight-line speed to allow large gains to be made in the corners. Despite the cornering condition being important, aerodynamicists are restricted …

Creating A User-Friendly Personal Wine Collection Inventory Management System, Peter Loddengaard

Industrial and Manufacturing Engineering

This project set out to create a user-friendly wine collection management software. Existing systems were reviewed and discussions with collectors took place to establish the user requirements for this type of inventory management system. This led to the scope of the project being narrowed to making a wine bottle entry form that was quick and easy to use. The programming language, Ruby on Rails, was used to design this system, and learning the software was a large part of the project itself. It was established that four forms would be designed using combinations of two ergonomic factors: an “F” shaped …

Wasco Environmental Chamber System Manifold, Steve Mark Yatco

Industrial and Manufacturing Engineering

This report details the process of designing and producing a manifold that connects ultra-high purity (UHP) pressure and vacuum switches to an air supply so that the parts may be tested in an environmental chamber. Using the DMAIC (define, measure, analyze, improve, and control) methodology of problem solving, progress on the project includes thorough research about the problem, preliminary design solutions, iterative prototyping, and testing specific functionalities. Manufacturing engineering topics of tooling, fixturing, metrology, quality, and machining with manual and computer numerical control (CNC) varieties of both mills and lathes are applied during the course of the project. The report …

Frito-Lay - Supply Chain Impact Analysis, Kerri Blosch, Vincent Phua, Jeffrey Silva

Industrial and Manufacturing Engineering

The snack food company Frito-Lay relies on Route Sales Representatives (RSRs) to stock and maintain shelves of snack foods in every store. Frito-Lay currently does not have a system which can accurately predict cannibalization, or the effects of a store opening or closing on other stores of the same chain in the area. The goal is to sort through 1900 stores in a given metropolitan area to see the effects of cannibalization. In order to tackle the problem, a Microsoft Access program was created to filter stores based on location or whether the store was open for the full three-year …

Process Testing And Improvement Of Tapping Machinery At Lisi Aerospace, Michael James Hester

Industrial and Manufacturing Engineering

This report documents my senior project for California Polytechnic State University San Luis Obispo. I have chosen to do a senior project with Lisi Aerospace. Lisi would like to compare the manufacturer rated cycle count of taps versus an experimental one based on our machines in house. My goal for this project would be to run an experiment on one tapping machine and report on the achievable cycle count for the taps. I plan to do this in several ways including:

• Running extra cycle counts above tap manufacturer recommendations

• Documenting machine failure modes

• Create a process document to be repeated …

  ---

  Go to article

Improving Advertisement Recognition And User Interface Of Gameofwarrealtips.Com, Chad Kihm, Alexander Meyer

Industrial and Manufacturing Engineering

The purpose of this experiment was to determine which location of advertisement would be the most recognized on the Game of War Real Tips website and to improve the website’s user interface by using both quantitative and qualitative data. To accomplish this, two experiments were created. The first experiment was designed to determine which location of advertisement would be recognized most by users. A screen would flash for 0.5 seconds and the subjects would mark where they believed they recognized an advertisement. A statistical analysis was completed to determine whether the location of the advertisement had an effect on the …

Explosive-Driven Shock Wave And Vortex Ring Interaction With A Propane Flame, P. Giannuzzi, M. J. Hargather, Graham Doig

Aerospace Engineering

Experiments were performed to analyze the interaction of an explosively driven shock wave and a propane flame. A 30 g explosive charge was detonated at one end of a 3-m-long, 0.6-m-diameter shock tube to produce a shock wave which propagated into the atmosphere. A propane flame source was positioned at various locations outside of the shock tube to investigate the effect of different strength shock waves. High-speed retroreflective shadowgraph imaging visualized the shock wave motion and flame response, while a synchronized color camera imaged the flame directly. The explosively driven shock tube was shown to produce a repeatable shock wave …

Liquefaction Potential Of Recent Fills Versus Natural Sands Located In High-Seismicity Regions Using Shear-Wave Velocity, R. Dobry, T. Abdoun, K.H. Stokoe Ii., R. E.S. Moss, M. Hatton, H. El Ganainy

Civil and Environmental Engineering

The liquefaction potential of clean and silty sands is examined on the basis of the field measurement of the shear-wave velocity, Vs. The starting point is the database of 225 case histories supporting the Andrus-Stokoe Vs-based liquefaction chart for sands, silts, and gravels. Only clean and silty sands with nonplastic fines are considered, resulting in a reduced database of 110 case histories, which are plotted separately by type of deposit. A line of constant cyclic shear strain, γcl≈0.03%, is recommended for liquefaction evaluation of recent uncompacted clean and silty sand fills and earthquake magnitude, Mw=7.5. The geologically recent natural silty …