Engineering Commons^™

Streaming Mysql Database Activity To Aws Kinesis, Chris I. Voncina

Computer Engineering

Connecting Amazon RDS MySQL engine with AWS Kinesis is a feature that RDS customers have often requested. A good example indicating customer demand is demonstrated on AWS’ forum post at https://forums.aws.amazon.com/thread.jspa?messageID=697516.

Upon completion, my project will enable Amazon RDS to pick up the MySQL open source project, integrate the MySQL plugin with Amazon RDS MySQL and deliver this feature to Amazon RDS MySQL customers. Other open source engine projects can follow and build upon my project.

Amazon Aurora delivered similar capability to the project. See details at https://aws.amazon.com/about-aws/whats-new/2016/10/amazon-aurora-new-features-aws-lambda-integration-and-data-load-from-amazon-s3-to-aurora-tables/

Portable 6 Lead 4 Electrode Ekg, Cody Magnuson, Wes Archbold

Electrical Engineering

This project focused on designing a small, portable, 6 lead 4 electrode electrocardiogram (EKG) machine with enough accuracy and resolution to successfully diagnose clinical issues. The electrical design used to measure signals originating from the heart can be broken up into three stages. The first stage is the human device interface. Next, is the analog block that filters out common mode noise and conditions the signal for digital encoding using instrumentation amplifiers, a right leg circuit, high pass, low pass, and an amplifier. This circuit filters all frequencies above and below the frequency band of meaningful data (1-160Hz), rejects signals …

Usa Boccia Ball Ramp For Athletes With Quadriplegia, Alissa A. Koukourikos, Matthew Lee, Nathan Bernards

Mechanical Engineering

In this report, the design process in creating an assistive device for Boccia Classification 3 (BC3) players is outlined. The initial research steps, including research into the rules of the game, capabilities of the players, and existing products is documented to show where ideas for the product stemmed from. This transitions into requirements that the sponsor requested, and preliminary designs and ideas for the product. Finally, this report explains the details of the final design, which has been analyzed for safety, ease of use, and ability to function under different conditions. The processes of manufacturing and testing will also be …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Whitespace Exploration, Jason Lloyd Daniel

Master's Theses

As engineering systems grow in complexity so too must the design tools that we use evolve and allow for decision makers to efficiently ask questions of their model and obtain meaningful answers. The process of whitespace exploration has recently been developed to aid in engineering design and provide insight into a design space where traditional design exploration methods may fail. In an effort to further the research and development of whitespace exploration algorithms, a software package called Thalia has been created to allow for automated data collection and experimentation with the whitespace exploration methodology.

In this work, whitespace exploration is …

Rf Front End For An Integrated Silhouette Capture And Boundary Detection Frequency Modulated Continuous Wave Ultra-Wideband Radar System For The Extension Of Independent Living, Adrian Smet

Master's Theses

Limitations of current eldercare monitoring systems leave a need for new solutions. A monitoring system based on a frequency modulated continuous wave ultra-wideband short-range radar is proposed for this application. The complete proposed monitoring system is comprised of four blocks: boundary detection, silhouette capture, human identification, and data transmission. This paper develops the RF front end hardware for the silhouette capture subsystem.

System requirements are derived for the silhouette capture subsystem. An architecture for the RF front end is designed, and required individual component specifications are determined. Components are selected off the shelf or custom designed for each socket. Full …

Eeg Characterization During Motor Tasks That Are Difficult For Movement Disorder Patients, Adam Joshua Aslam

Master's Theses

Movement disorders are a group of syndromes that often arise due to neurological abnormalities. Approximately 40 million Americans are affected by some form of movement disorder, significantly impacting patients’ quality of life and their ability to live independently. Deep brain stimulation (DBS) is one treatment that has shown promising results in the past couple decades, however, the currently used open-loop system has several drawbacks. By implementing a closed-loop or adaptive DBS (aDBS) system, the need for expensive parameter reprogramming sessions would be reduced, side-effects may be relieved, and habituation could be avoided. Several biomarkers, for example signals or activity derived …

Interfacing A Hirudo Medicinalis Retzius Cell With Insulated Gate Of Mosfet, Rachel M. Smith

Master's Theses

Much work has been done to study the external stimulation of nervous tissue as well as the transmission of neural signals to electronics. Peter Fromherz was one of the pioneers in this area of electrophysiology, with a series of experiments in the 1990s that aimed to characterize and optimize the interface between neural tissue and transistors. In this thesis, Kurt Sjoberg and I interfaced a Retzius cell isolated from a Hirudo medicinalis ganglion with the insulated gate of a MOSFET. The goal was to see change in membrane potential that could be related Fromherz’s original 1991 work. Our experimental setup …

Flexible Custom Electric Skateboard, Caleb Adam Kelsay

Electrical Engineering

At Cal Poly traveling long distances only accessible by foot such as across campus or from the car park to class can be tiring and time-consuming. While not physically demanding, the trek consumes time in our tight college life schedule. To improve our time efficiency this project provides a relatively lightweight, powered solution to quickly and effectively travel long distances while maintaining full control and safety even on hills, a current limitation of traditional skateboards.

This electric skateboard includes the battery capacity to travel all around campus on a single charge with a compact and flexible skateboard design that provides …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Dual Method Headphone Amplifier, Joseph S. Gross, Timothy P. Murphy

Electrical Engineering

Many high impedance headphones underperform their full potential when directly connected to the audio source. Amplifiers boost the audio signal and provide the headphones with sufficient power to ensure their maximum performance. The invention of transistors caused vacuum tube implementation to decline, leaving many audiophiles unsatisfied with the transistor’s sound signature. Vacuum tubes and transistors both amplify signals, however the distinct “tube sound” has vanished.

We have designed and created a product where the user selectively switches between solid-state transistor and tube amplification to compare the sound signatures of each amplification method. The ability to switch between the solid-state and …

Museum Wave Tank Design, David James Streng, Lisa Michelle Dischinger, John Frederick Niemoller

Mechanical Engineering

The Santa Maria Discovery Museum would like to add a tsunami wave tank to be one of their demonstrations. The wave tank needs to draw the attention of their young crowd and be educationally informative about the shapes and effects of waves. As this is a museum demonstration for children, the structure, user interface, and wave making mechanism must be durable.

We are a senior project team from California Polytechnic State University that worked on this project with Allan Hancock College and Stanford University. We created waves by rapidly moving a plunger vertically in the water column. This project allows …

Thermal-Fluid Dynamic Model Of Luge Steels, Brandon Stell

Master's Theses

Luge is an Olympic sport in which athletes ride feet-first on sleds down an ice-covered track. Competitors spring from the starting position and accelerate their sled by paddling with spiked gloves against the ice surface. Once the Luger leaves the starting section, their downhill motion is solely propelled by the effects of gravity. Athletes compete, one after the other, for the fastest time. Runs can differ by as little as a thousandth of a second, meaning that every minor sled adjustment, change of line choice, and shift of body position is critical. In the past, the sport of Luge has …

The Role Of Soil Stiffness In Reverse Fault Rupture Propagation, Moises I. Buelna

Master's Theses

A nonlinear Mohr-Coulomb constitutive model with a strain dependent yield surface and non-associated flow was employed to study the plastic soil properties which affect the rate of surface fault rupture propagation in reverse events. These numerical simulations show a trend for soils with higher stiffness to have a higher rate of rupture propagation. Additionally the study shows the effects of strain softening and hardening on the rate of rupture propagation. Soils which strain harden exhibiting ductile behavior typically require more basal offset to rupture to the surface than soils which strain soften exhibiting brittle behavior. These results agree with our …

Manufacturing And Instrumentation Of An Open End Compressed Air Shock Tube, Josue O. Ruiz

Master's Theses

Shock tubes have been used extensively to study shock wave structures and high speed flow features. The purpose of constructing this open end shock tube was to have the ability to produce shock waves in a laboratory setting but also understand the exit flow coming out which can be applied to future studies that are beyond the scope of this work. This undertaking would require that an open end shock tube be built and instrumented with PCB Integrated Circuit Piezoelectric (ICP) Pressure Sensor Model 113B24 that would then be connected to a PCB Model 482C05 Signal Conditioner with the purpose …

Pubwc Bathroom Review App, Clay Jacobs

Computer Science and Software Engineering

For my senior project, I developed an iOS application to allow users to find, rate, and review nearby public restrooms. The app takes advantage of crowdsourced data to collect bathroom and review information. I also created a REST API to interface with the backend database that could be used to port the application to other platforms.

Development Of An Insulated Solar Electric Cooker (Isec) With Thermal Storage For Use In Developing World Countries, Amanda Gyokery, Spencer W. Davis, Kyle Henry Smit

Mechanical Engineering

According to the World Health Organization, about half of the world’s population uses biomass stoves to cook their meals. However, biomass fires can be dangerous. Unattended biomass fires and indoor air pollution are responsible for an estimated 600,000 deaths annually and the creation of approximately 4 million instances of chronic disease. They also release CO2 and other pollutants into the air, and require the families to gather enough material to keep it burning (WHO 2017). Although cleaner cooking technology seems like a clear solution, often families are either unwilling to change how they cook food or are unable to afford …

Lean Construction Teaching Module: Push/Pull Planning, James M. Iroz

Construction Management

The Construction Management Department at California Polytechnic University at San Luis Obispo has taken interests into the topics of Lean Construction to be a part of its curriculum. Lean Construction is a methodology in the built environment that tries to establish a leaner and more efficient work place in the industry. Within this broad spectrum of methodology, scheduling and more specifically, “push pull scheduling” is one of its many trademark applications. As the demand for more efficient projects rise, it is increasingly important for the next generation of construction students to be aware and educated with efficient skills. This experimental …

Introduction Of Industry-Based Technical Electives Within Cal Poly Slo's Cm Curriculum, Michael Hicks

Construction Management

The California Polytechnic State University, San Luis Obispo requires that all Construction Management majors complete 8 units of technical elective credit as part of the degree requirement. Tech electives are various courses that offer additional information on particular constructionrelated subjects. This paper will explore the option of adding additional tech elective courses that focus on the various industry sectors within the construction line of work, particularly: residential, commercial, and specialty trades such as MEP. With these areas of construction being the primary job market targets for recent graduates, there is an interest to gain a higher understanding of these industries. …

Preconstruction Services For The Simpson Strong-Tie Lab Crane, Peter James Schoemann

Construction Management

For several years the Construction Management Department faculty have discussed implementing a better system of lifting heavy items in the Simpson Strong-Tie Lab. Currently, student assistants and faculty use a forklift to perform heavy lifting, there are definitely more safe and efficient alternatives available. An under running single girder crane system is in the process of being built in the Simpson Strong Tie lab. A full structural analysis has been calculated assuring the crane can lift up to two tons. This crane will help students and faculty use the lab to build the tiny house as well as other projects …

Devcon's In-House Design Department Benefiting Their Construction Process: A Case Study, Neeka M. Nazhand

Construction Management

Devcon Construction Inc. is a general contracting company that implements a design department in-house to aid them with their design-build projects. Since their doors opened in 1976, Devcon has imbedded an in-house design department that now delegates about twenty-five percent of their design-build projects, and acts as a resource center for their other construction projects. Having this unique design department benefits both the design and construction side of projects, because working for the same company motivates the teams to work together and solve problems faster. The design department is not for direct profit and only works with Devcon’s contractors, mainly …

Construction Of A House In Tijuana, Mexico, Adam Scianna

Construction Management

No abstract provided.

Best Practices For Preparing For The Reno Commercial Problem, Cole Range

Construction Management

The ASC Region 7 Commercial competition is one of the largest and most popular student competition in the country. Students from some of the most prestigious construction management and construction engineering schools compete in a rigorous eighteen hour competition. These teams have around 6 months to prepare for the competition. Their preparation methods have a significant impact on how they place in the competition. The amount of time spent with the teams industry sponsor, number of practice problems completed, hours spent practicing, number of team bonding events, and many other factors contribute to the team’s success. Many of the schools …

Best Practices And Applications Of 3d Printing In The Construction Industry, Jake Kidwell

Construction Management

The construction industry is constantly looking for new ways to improve project efficiency and profitability. Many new technologies such as Business Information Modeling (BIM) programs, and project management software have been introduced to aid in preconstruction and on site coordination. However, traditional building methods have remained relatively unchanged for decades. 3D printing (3DP) is a promising new technology that has the potential to not only be an effective means of increasing project efficiency and profitability in the field, but also have positive environmental impacts. However, as it exists today, this technology is highly limited by size, material, skilled labor, and …

Evaluating The California Contractors Licensing Exam And Its Relevance To The Construction Industry, Austin O'Mara

Construction Management

The California contractors licensing exam tests aspiring contractors on their knowledge of the construction industry on other legal and trade topics. This paper is a case study that evaluates the contractors licensing exam and its ability to evaluate contractors. It concludes that the test itself is not responsible for increasing quality due to it being a simple process of memorization, but that California’s strict licensing requirements correlate to lower percentages of negative reviews. Various contractors from California were interviewed to understand their opinions of the licensing exam and how the knowledge from the exam related to their time in the …

A Case Study On The Compliance Of The Heavy Duty Diesel Vehicle Regulation, Kyle Potts

Construction Management

In December of 2008 the California Air Resource Board approved the On Road Heavy Duty Diesel Vehicle Regulation. The purpose of this new law is to reduce the emissions from existing on-road diesel vehicles operating throughout California. However, this new regulation is drastically affecting trucking companies throughout the state of California. Trucking companies across state lines are left with a few costly options to comply with the On Road Heavy Duty Diesel Vehicle Regulation. This case study focuses on two similar trucking companies and how they went about complying with the new regulation and which options have been most effective …

Certifications In The Construction Industry: A Look Into Industry Standards, Shawn T. Pacaoan

Construction Management

Becoming certified in various areas of construction is a task that requires completing rigorous courses to become more knowledgeable and give those the tools to succeed in a certain path within construction. Having a multitude of certifications diversifies your portfolio, and strengthens your resume but acquiring multiple certifications can be a very expensive and time-consuming task. Is the time commitment and expenses worth it? By the end of this paper students will finally know the answer to a question they have always been asking, “Do construction certifications actually better your chances to get a job?” Since there are numerous certifications …

Value Of Utilizing Tubular Daylighting Devices In Csu, Channel Islands' Gateway Hall, Blake T. Walsh

Construction Management

Daylighting is becoming an increasingly more important aspect of building design as our planet’s natural resources deplete and the cost savings for daylighting systems grow. California State University, Channel Islands (CSUCI) values the use of daylighting and aims to incorporate it into its upcoming project, Gateway Hall. One option of daylighting that the campus is considering for this project is tubular daylighting devices (TDD). This paper will study the use of tubular daylighting devices and the potential cost savings that they could have on Gateway Hall. The company leading the way in TDD technology is Solatube, whose products are among …

Case Study: Diesel Excavators Compared To Hybrid Excavators, Corey Mcgrillen

Construction Management

The construction industry is constantly evolving and developing equipment that is more efficient, materials that promote sustainability and practices that emphasize lean construction principles to enhance productivity on projects. Modern day construction projects have become highly reliant on these ideals due to the highly competitive nature of the industry. In regards to heavy civil construction, specifically the underground utilities market, equipment costs count for a large percentage of overall project costs. Reducing these costs allows a contractor to be more competitive. As the focus on infrastructure construction continues to grow and expand, many heavy civil contractors are turning to alternative …

Metallica Worldwired Tour: Case Study, Phillip Matthews

Construction Management

The concert touring industry is financially performing at its highest level in history. A shifting trend from selling records to selling live entertainment experiences has caused a boom in the event production field. This project examines one of the most successful global tours of 2017, Metallica’s WorldWired Tour. This tour was able to achieve success with an unconventional stage design. The goal was to enhance the audience experience and interaction with the band. To achieve this, Metallica toured with a roofless stage. This unique stage design proposed challenges for all areas of concert production, including lighting, audio, video, and atmosphere. …