Engineering Commons^™

Modeling And Analysis Of Cal Poly Microgrid, Matthew A. Guevara

Master's Theses

Microgrids—miniature versions of the electrical grid are becoming increasingly more popular as advancements in technologies, renewable energy mandates, and decreased costs drive communities to adopt them. The modern microgrid has capabilities of generating, distributing, and regulating the flow of electricity, capable of operating in both grid-connected and islanded (disconnected) conditions. This paper utilizes ETAP software in the analysis, simulation, and development of the Cal Poly microgrid. Additionally, an ETAP power system protection tutorial is created to aid students entering the power industry. Microprocessor-based relays are heavily utilized in both the ETAP model and hardware implementation of the system. Case studies …

Real-Time Audio-Midi Controller, Brian Shino Balberchak

Computer Engineering

Most MIDI controllers used in music production use a regular keyboard to generate the MIDI notes that are sent to the synthesizer. This project aims to provide the user with a different way of generating MIDI data: by playing an instrument of their choice with a passive electronic pickup to generate MIDI notes that correspond with the fundamental frequency of the musical pitch being played. The pitch-detecting algorithm used in this application utilizes a modified form of auto-correlation.

As an embedded systems project that uses signal-processing techniques, the knowledge of topics from the following courses was essential:

EE 211: Op-Amp …

Analysis Of Student Understanding Of The Change Order Process, Austin C. Eberle

Construction Management

Effective project management comes from controlling cost, time, and quality on a project. As construction projects become more complex, changes in the original contract documents will arise due to the nature of human error. How a project manager documents and addresses change events can alter the successfulness of a project. This study attempts to look at senior level construction management major student’s understanding of the change order management process. The goal of the study is to ascertain how well the students feel the construction management curriculum prepared them to manage change events in industry. Students were asked to demonstrate their …

California & Foothill Tunnel Feasibility Project:, Tyler J. Rohde

Construction Management

Safety on and off campus while attending college is one of the fastest growing concerns around the country. Having a secure path to get to campus is also a large problem to a select number of students here at California Polytechnic State University. The "Rape" Tunnel at the corner of California and Foothill Boulevard is considered to many to be a danger because of its unpredictable accessibility and the stigma that surrounds it.

Modular Utility Rack And Accessory Line, Ian Philip Thomas

Construction Management

There is a large gap in the market for heavy duty work racks for fleet vehicles. Modular racks have recently been introduced to the industry allowing contractors the ability to customize them to their needs. However, all customizable racks are limited to lightweight applications. The high strength steel rack I have designed is both modular, and sturdy enough to handle up to an estimated one thousand pounds. On our website, contractors will be able to scroll through the available attachments for his make and model rack and view them built on to his vehicle in 3D computer generated graphics.

Aligning Construction Management Students' Minors With The Needs Of Industry Professionals, Isaac Alexis Maximov

Construction Management

While in college, students will have to decide if they want to pursue a minor, in addition to their bachelor’s degree. To pursue a minor one has to take additional units, and one usually does this without any free electives, meaning their graduation date is most likely delayed. A minor, in theory, should provide additional benefits such as being more hirable and earning potential; however, in the construction industry, the minors construction management students are taking do not align with the needs of construction industry professionals in. And while most students believe having a minor will increase their salary, this …

The Skilled Framing Carpenter Shortage On The Central Coast Of California: A Focus On Residential Construction, Trevor John Nally

Construction Management

The residential construction industry has many critical components. When one of these components is not operating optimally, it can be detrimental to the system as a whole. A critical component to residential construction is skilled craftspeople. Without them, there can be no significant physical work completed on any residential project. Currently the component of skilled craftspeople in residential construction is in a state of short supply. Throughout the United States, there is an inadequate amount of craftspeople to fill the demand for their skills. The Central Coast of California is experiencing this issue much like the rest of the nation …

Acoustical Damping For Poly Canyon Village's Music Room, Jayvee Martir

Construction Management

Poly Canyon Village was a project by Clark Construction and Architect Niles Bolton Associates that was completed in 2009 that provided housing for upcoming and continuing students. One of the buildings, labeled “Aliso” has constructed the music practice room for students to either play their musical instruments or have it become a convenient area to record, with one particular band “Tin Kitty” having problems with being too loud. Even so, there is potential for this music room to become much more than what it currently is. This paper is a research paper that covers the various materials and methods of …

Skills And Traits Recruiters Value Most When Interviewing Construction Management Students For Internships And Full-Time Positions, Noel Medina

Construction Management

Interviews are a common method for companies to find whether a candidate meets all the requirements for the job at hand. Questions asked by interviewers tend to focus on hard skills, also known as technical skills, soft skills and other traits that are highly valued by the company. The objective of this project is to find which hard skills, soft skills and traits construction management professionals’ value most when interviewing students. The methods used for data gathering were in-person interviews and a survey, which was sent to construction industry contacts. The ultimate goal of this report is to relay these …

Perceptions Of Efficiency In Construction Jobsite Safety, Jay Doyle

Construction Management

This project is to examine the perception of jobsite safety practices of California contractors. Preliminary research found that jobsite safety practices are not a hinderance on a project schedule when managed well. A survey of students and industry professionals was the methodology used to gather this information. This survey consisted of various questions about the perception of safety practices on jobsites the respondent has worked on themselves, as well as their perception about safety in the construction industry as a whole. Significant findings were that half of the surveyed individuals had worked on a job site in which they lost …

Feasibility Analysis For Reclaim Device During Shotcrete Application, Cameron Neil Berkins

Construction Management

Shotcrete application has proven advantages over cast-in-place concrete under many different situations. Ease of access, minimal formwork, and higher productivity are prime examples. Its uses have exponentially increased through technical innovations to improve the ready-mix, nozzlemen technique, application surfaces, and to ensure higher dependability of the equipment. Unfortunately, concrete waste is still one of the highest percentages of overall waste in the construction industry. Shotcrete rebound, the material that falls from the wall due to lack of cohesion during installation, has slowly been reduced due to ready-mix alterations over the years, but effective recycling processes have yet to be implemented. …

Bank Of Italy Building's Net Zero Energy Renovation: A Case Study, Joshua Kai Balaban

Construction Management

The designation of Net-Zero Energy describes a building that meets all of its energy demand with on-site renewable energy generation. The Bank of Italy Building, in Downtown San Jose, California, is currently undergoing design-development to transform a landmark historical site into a modern, Net-Zero Energy building. This paper will analyze the project team’s design approach to minimizing energy demand and meeting this demand with on-site renewable energy. It will also evaluate the unique challenges associated with preserving the historical character of the existing structure, while converting it into a high-performing building. The research will consider similar past projects and approaches; …

Cost Analysis Of Modern Residential Solar Installations, Alex Scott Adams

Construction Management

This paper is a detailed cost analysis of standard photovoltaic panels and Tesla’s solar tiles. This analysis is specifically for the San Luis Obispo area, and focuses on comparing and contrasting new and old styles of residential solar for the average single family dwelling. This is important because there will become more consumers of solar in this area as the price becomes more favorable, and as sustainable practices become the norm. This trend is set to continue because of the movement to combat climate change. Solar energy fits into this movement because it is a source of energy that is …

Panelized Workforce Housing, Brock H. Armstrong

Construction Management

This study analyzes the utility of a panelized exterior wall system in workforce housing. First, it introduces why the need for the project exists. Second, it touches on how Cal Poly procured the project and who the client is. Third, it lays out how the project was dealt with as far as its structure and the roles of the students taking part in the cohort. Fourth, it looks at the process of designing the panels, the various restrictions the students had to deal with in designing them, and how the panels changed over time due to new constraints being made …

Creating An Organized/Safer Way For Contractors To Carry Oversized Spare Tires, Thomas Arismendi

Construction Management

Construction is an industry that needs trucks/vehicles to travel across large dirt construction sites without getting stuck. This typically means upgrading to a larger wheel width/diameter to create the largest possible surface area for the tire to cover while off-road. Managing to get a flat tire whether it is rolling a bead in the dirt from being aired down or running over objects such as nails/screws, it is always important to carry a spare tire that fits the application. This causes an increased need to safely lock down an oversized spare when the time comes for one. Most of the …

The Feasibility Of Implementing Solar Power On Construction Sites, Jordan Alves

Construction Management

The purpose of the research conducted in this project is to determine the feasibility of implementing solar on a construction site as means of providing power. Power requirements as well as costs from the established sources were compared to the current costs of solar, more importantly, to the current cost of the specific solar setup needed to provide consistent power to the site. As a baseline, the project power requirements were based of the requirements of the civil site the generator data was pulled from.

Case Study: Proven Benefits Of Insurance Backed Stretch And Flex Programs With Cdm Smith, Colin Dzubnar

Construction Management

Safety is the most important aspect of the construction industry. Due to daily strenuous physical activities that occur on a construction jobsite, having your body warmed up, pain-free and ready to perform labor intensive tasks is critical. This case study will examine the correlation between the past and present daily stretching format at the construction jobsite with CDM Smith and Insurance Company. For continuity, it will include an interview with the same CDM Smith Region H&S Manager as well as similar surveys to find out the construction workers thoughts and reactions to stretching prior to work. Although IO to 20 …

Sysml Output Interface And System-Level Requirement Analyzer For The Horizon Simulation Framework, Viren Kishor Patel

Master's Theses

Model-Based Systems Engineering in industry has been constantly increasing its presence within the aerospace industry. SysML is one such MBSE tool that shows complex system organization and relationships. The Horizon Simulation Framework is another MBSE tool, created by Cal Poly students, that gives users the ability to run “day-in-the-life” simulations of systems. Finding a way to link these two tools could allow systems engineers to reap the benefits of both.

This thesis investigates the background and design process involved with developing the code that can convert an output file generated in SysML, into a format specifically made for the Horizon …

Environmental Engineering At Cal Poly-San Luis Obispo, Harold M. Cota

Civil and Environmental Engineering

The story recorded here began with a timeline prepared by Professor Rod Keif outlining some of the important events in the formation of the Environmental Engineering Department at Cal Poly-San Luis Obispo. He expanded the timeline and added some comments in a 5-page History of Environmental Engineering at Cal Poly in 1998 (1).

Rod Keif was a key player in the Air Conditioning and Refrigeration Engineering Department that eventually became the Environmental Engineering Department. He prepared his students to be leaders in the industry, received the Distinguished Teachers Award in 1967, and was chairman of the Academic Senate in 1969. …

Safety Videos For Major Shop Equipment In Cal Poly Brae Lab 1, Trey Joseph Johnston

Agricultural Education and Communication

At California Polytechnic State University, San Luis Obispo, students from all majors can take a variety of classes in the BioResource and Agriculture Engineering Department (BRAE). It is essential for future high school mechanics educators to learn the basic shop tools and the importance of safety in the laboratory. In shop 1 of the BRAE Department, there are many different tools students will find in a mechanics classroom. The five main power tools are the Table Saw, Drill Press, Bench Grinder, Radial Arm Saw, and Disk/Belt Sander.

In BRAE 121 Agricultural Mechanics, students learn basic shop skills about lab safety …

Sensel Morph: Product Communication Improvement Initiative, Kasper W. Lui-Delange, Samuel Distler, Rafael Paroli

Industrial and Manufacturing Engineering

Sensel is a startup company that recently launched their first product. The Morph is a multi-functional touch interface that interacts with a wide range of software through touching enabled silicon overlays. The support documentation was believed to cause confusion, which is leading to limited sales and increased returns. We focused on the structures of its website and product documentation, which were initially developed without end user testing. Our team explored Sensel’s current state to develop two multiphase design alternatives. These designs provide multiple user-facing testing frameworks as well as determine the root-cause of the Morph’s current communication issues. The designs …

Improving Warehouse Capacity For Synergy Manufacturing, Brian Garcia

Industrial and Manufacturing Engineering

This report aims to aid Synergy Manufacturing (a well-recognized producer of high-performance components for off-roading vehicles) to improve in-house production capacity in wake of an expanded facility space and substantial increase in the number of current available products over the span of a few years. Current warehouse issues include struggling to meet demand, high inventory, and an unsafe overcrowding of WIP on the floor space. The steps taken to resolve these issues are to collect setup times, operational times, total process times, machine tool usage, and flow process from a selected group of five high-demand items from Synergy Manufacturing’s current …

Building A Database For A Startup: Boltabout, Danielle Tran

Industrial and Manufacturing Engineering

BoltAbout is a young start-up based out of San Luis Obispo, CA. Their primary business is renting out bikes via monthly-subscription with the opportunity to lease to own. BoltAbout has seen great success over the past 2 years and is looking to expand. The company currently has 200 bikes, but the demand is far outweighing the supply. The CEO of BoltAbout hopes to grow to grow the company’s inventory to 500 bikes by the end of 2017 and 1500 by the end of the school year. As the company continues to expand, it will need to be able to accurately …

Crystal Engineering Manufacturing Facility Analysis, Maximiliano Cortes, Eric Dustin Kornrumpf, Sthefano Alvarado

Industrial and Manufacturing Engineering

This report will encompass a two-quarter long senior project effort to provide a recommendation for the client, Crystal Engineering. Crystal Engineering is currently in the process of introducing three new products, one now and two within the next six months. However, their existing lines already occupy the available production space and as a result, they are unable to determine how to effectively incorporate new production lines within the facility. Therefore, the main objectives of this project were to deliver several facility redesign layouts backed by a holistic justification for each. The formulation of the facility redesign layouts incorporated several industrial …

Fire And Life Safety Analysis- College Campus Building, Jacob Ludeman

Fire Protection Engineering: Culminating Experience Project Reports

A Fire and Life Safety Analysis was performed as an academic exercise as part of the MS Fire Protection Engineering Program of California Polytechnic State University, San Luis Obispo. The project is a culminating report with regards to prescriptive based and performance based aspects for the fire and life safety analysis of a project building. These analyses were performed on a building located on a college campus in Southern California and is to remain nameless upon the request of the owner and architect. The building is in the School of Physical Sciences at the University it resides. The building houses …

Construction Innovation Center- Fire And Life Safety Analysis, Matthew Atwell

Fire Protection Engineering: Culminating Experience Project Reports

In this report you will find the analysis of existing fire protection systems and features that are installed in the Construction Innovation Center at California Polytechnic State University, San Luis Obispo. The Buildings construction was completed in 2008 and is separated into three separate buildings A, B, and C connected by an exterior balcony. This report is separated into two separate analysis Prescriptive and Performance.

The Prescriptive analysis reviews the buildings means of egress, fire alarm systems, the suppression systems, and the structural fire protection. The Prescriptive-based analysis of the Construction Innovation Center confirms that the building meets the requirements …

Building 43: Recreation Center - Cal Poly San Luis Obispo, Daniel Gonzalez

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this project is to analyze the Fire Protection systems of the Recreation Center on campus at California Polytechnic State University, San Luis Obispo. Only the building itself is analyzed in this project. This report provides both a prescriptive-based and performance-based analysis of the building. The prescriptive-based analysis includes an overview of the structural components and their fire resistance, the sprinkler system, the fire alarm system, as well as an egress analysis. The performance-based analysis consists of three different potential fire scenarios, with the first being modeled with both Pathfinder and Pyrosim. Resources used are the building’s floor …

Plant Identification Using Tensorflow, Kody G. Dangtongdee

Computer Engineering

Exploring the diverse nature that is available in San Luis Obispo is one of my favorite activities, however, I often am frustrated that I am unable to identify or learn more about the plants that I appreciate. This project is an attempt at using the concepts of neural networks to create an image classifier which can identify plants. Machine learning is one of the biggest topics in computer science at the moment, and its many uses make it a topic that will continue to be researched for a very long time. Convolutional neural networks are a popular realm of machine …

Modeling Adversarial Insider Vehicles In Mix Zones, Nicholas Plewtong

Master's Theses

Security is a necessity when dealing with new forms of technology that may not have been analyzed from a security perspective. One of the latest growing technological advances are Vehicular Ad-Hoc Networks (VANETs). VANETs allow vehicles to communicate information to each other wirelessly which allows for an increase in safety and efficiency for vehicles. However, with this new type of computerized system comes the need to maintain security on top of it.

In order to try to protect location privacy of the vehicles in the system, vehicles change pseudonyms or identifiers at areas known as mix zones. This thesis implements …

Cal Poly Rose Float Overheight Mechanism, Ali A. Harake, Breanna H. Tran, Morgan K. Montalvo, Sergio B. Gutierrez

Mechanical Engineering

The Cal Poly Universities jointly build and enter a floral entry, commonly known as a float, into the Pasadena Tournament of Roses Rose Parade. At the end of this parade route, there is a 16’6” bridge all floats must drive under. The scope of our project is to design and build a mechanism roughly described as an “overheight” mechanism, as its function is to raise and lower large heavy structures so the float is able to pass under the bridge. This hydraulic mechanism is powered via the float animation system.