Engineering Commons^™

Design And Verification Of A Labview Automated Antenna Radiation Pattern Measurement System, Dylan C. Bloom

Master's Theses

In 2014, Toyon Research Corporation donated a 6’x6’x8’ anechoic chamber to the Cal Poly EE department to advance student education in the areas of antennas and wireless communications. An anechoic chamber is a room designed to suppress electromagnetic radiation reflections so that accurate measurement of radio frequency (RF) systems such as wireless radios and antennas can take place. Despite the fact that Cal Poly already has a larger anechoic chamber, primarily used for antenna characterization, it is the purpose of this project to design, code, and equip the new chamber so that it performs at least as good, or better …

Evaluation Of Electrochemical And Laser Polishing Of Selectively Lasermelted 316l Stainless Steel, Julian R. Lohser

Master's Theses

Selective laser melting has shown incredible growth as a metallic additive manufacturing process in recent years. While it does provide many solutions and new ways to approach challenges, it does not come without issues of its own, namely, surface roughness. In the as-printed state, the surface roughness of selectively laser melted parts is unacceptable for use in engineering applications. Additionally, selective laser melting is used to produce complex geometries with hard to reach features, preventing conventional mechanical polishing from being successful. Therefore, it is necessary to evaluate non-mechanical polishing processes as treatments for surface roughness. In this study, electrochemical and …

Finite-Difference Modeling Of The Batch Process Smoldering Combustion Of Wastewater, Laura H. Kawashiri

Master's Theses

A MATLAB model was developed for the smoldering combustion of wastewater in the context of a decentralized residential wastewater treatment appliance. Data from a batch process sewage smoldering experiment was simulated using implicit finite-difference approximations, assuming one-dimensional transient conductive heat transfer. The time-dependent temperature profiles within the column represented the main parameters of interest and were used to verify recoverable heat energy estimations. Given that the modeling method used for this thesis represents a unique approach, the assumptions and limitations of this model are thoroughly described in the context of reproducing results for other smoldering setups. A lack of convergence …

Polycommit: Building Better Habits Through Gamification, Elliot Fiske

Master's Theses

Computer-assisted learning is older than Turing machines, and constantly evolves as technology improves. While some teachers are resistant to using technology in the classroom, “e-learning” techniques are becoming more common in almost every school, from K-12 to universities. As technology becomes more widespread, it becomes crucial to examine the various methodologies of computer-assisted learning and find the techniques that are most effective.

This paper explores the effectiveness of one such methodology, spaced repetition. This technique applies to homework assignments available to students online. We include an exploration of several existing apps that use this technique, and introduce our own novel …

Utilizing Permanent On-Board Water Storage For Efficient Deep Space Radiation Shielding, Nathan Ryan Gehrke

Master's Theses

As space technologies continue to develop rapidly, there is a common desire to launch astronauts beyond the ISS to return to the Moon and put human footsteps on Mars. One of the largest hurdles that still needs to be addressed is the protection of astronauts from the radiation environment seen in deep space. The most effective way to defend against radiation is increasing the thickness of the shield, however this is limited by strict mass requirements. In order to increase the thickness of the shield, it is beneficial to make mission critical items double as shielding material.

The human rated …

Exploring The Concept Of A Deep Space Solar-Powered Small Spacecraft, Kian Guillaume Crowley

Master's Theses

New Horizons, Voyager 1 & 2, and Pioneer 10 & 11 are the only spacecraft to ever venture past Pluto and provide information about space at those large distances. These spacecraft were very expensive and primarily designed to study planets during gravitational assist maneuvers. They were not designed to explore space past Pluto and their study of this environment is at best a secondary mission. These spacecraft rely on radioisotope thermoelectric generators (RTGs) to provide power, an expensive yet necessary approach to generating sufficient power. With Cubesats graduating to interplanetary capabilities, such as the Mars-bound MarCO spacecraft, matching the modest …

Improving Introductory Computer Science Education With Draco, Mike Dongyub Ryu

Master's Theses

Today, many introductory computer science courses rely heavily on a specific programming language to convey fundamental programming concepts. For beginning students, the cognitive capacity required to operate with the syntactic forms of this language may overwhelm their ability to formulate a solution to a program.

We recognize that the introductory computer science courses can be more effective if they convey fundamental concepts without requiring the students to focus on the syntax of a programming language. To achieve this, we propose a new teaching method based on the Design Recipe and Code Outlining (DRaCO) processes. Our new pedagogy capitalizes on the …

Dynamics Simulation And Optimal Control Of A Multiple-Input And Multiple-Output Balancing Cube, Felix K. Haimerl

Master's Theses

This thesis document outlines the development of a multibody dynamics simulation of an actively stabilized multiple-input, multiple-output, coupled, balancing cube and the process of verifying the results by implementing the control algorithm in hardware. A non-linear simulation of the system was created in Simscape and used to develop a Linear Quadratic Gaussian control algorithm. To implement this algorithm in actual hardware, the system was first designed, manufactured, and assembled. The structure of the cube and the reaction wheels were milled from aluminum. DC brushless motors were installed into the mechanical system. In terms of electronics, a processor, orientation sensor, motor …

Neuro-Silicon Interface Of A Hirudo Medicinalis Retzius Cell Integrated With Field Effect Transistor, Kurt Christian Sjoberg

Master's Theses

The focus of this thesis was to measure the intracellular voltage of a living neural cell using a silicon transistor. The coupling of neurological tissues with silicon devices is of interest to the fields of neurology, neuroscience, electrophysiology and cellular biology. In previous work by Peter Fromherz, single neurons were successfully coupled to transistors [1]. This thesis aims to show proof of concept of the fabrication of a simple neuro-silicon interface using wafer processing methods currently available at Cal Poly. The types of transistors and cells used, the methods for dissecting and preparing the cells, the electrophysiology methods for validating …

Modeling The Spatially Varying Point Spread Function Of The Kirkpatrick-Baez Optic, Nathan Adelman

Master's Theses

Lawrence Livermore National Laboratory's (LLNL) National Ignition Facility (NIF) uses a variety of diagnostics and image capturing optics for collecting data in High Energy Density Physics (HEDP) experiments. However, every image capturing system causes blurring and degradation of the images captured. This degradation can be mathematically described through a camera system's Point Spread Function (PSF), and can be reversed if the system's PSF is known. This is deconvolution, also called image restoration. Many PSFs can be determined experimentally by imaging a point source, which is a light emitting object that appears infinitesimally small to the camera. However, NIF's Kirkpatrick-Baez Optic …

Characterization Of Arterial Flow For Junctional Bleeding Control, Nick Bosio

Master's Theses

This study investigated reducing volumetric flowrate under steady flow conditions by varying lengths of compression with constant cross-sectional area and varying cross-sectional area reduction with constant length in order to better understand how to control junctional hemorrhaging. The hypotheses of this study were that length reduction will have little effect on volumetric flowrate and that cross-sectional area reduction would need to be approximately 80 percent in order to obtain bleeding control. The study found that length reduction has little effect on changing the flowrate. However, in order to obtain at least 80 percent reduction in flow, the area needs to …

Thermal Modelling And Validation Of Heat Profiles In An Rf Plasma Micro-Thruster, Alec Sean Henken

Master's Theses

The need and demand for propulsion devices on nanosatellites has grown over the last decade due to interest in expanding nanosatellite mission abilities, such as attitude control, station-keeping, and collision avoidance. One potential micro-propulsion device suitable for nanosatellites is an electrothermal plasma thruster called Pocket Rocket. Pocket Rocket is a low-power, low-cost propulsion platform specifically designed for use in nanosatellites such as CubeSats. Due to difficulties associated with integrating propulsion devices onto spacecraft such as volume constraints and heat dissipation limitations, a characterization of the heat generation and heat transfer properties of Pocket Rocket is necessary. Several heat-transfer models of …

Validation Of A 1d Algorithm That Measures Pulse Wave Velocity To Estimate Compliance In Blood Vessels, James Leung

Master's Theses

The purpose of this research is to determine if it is possible to validate the new 1D method for measuring pulse wave velocity in the aorta in vivo and estimate compliance. Arterial pressure and blood flow characterize the traveling of blood from the heart to the arterial system and have played a significant role in the evaluation of cardiovascular diseases. Blood vessel distensibility can give some information on the evolution of cardiovascular disease. A patient’s aorta cannot be explanted to measure compliance; therefore we are using a flow phantom model to validate the 1D pulse wave velocity technique to estimate …

Automated Pruning Of Greenhouse Indeterminate Tomato Plants, Joey M. Angeja

Master's Theses

Pruning of indeterminate tomato plants is vital for a profitable yield and it still remains a manual process. There has been research in automated pruning of grapevines, trees, and other plants, but tomato plants have yet to be explored. Wage increases are contributing to the depleting profits of greenhouse tomato farmers. Rises in population are the driving force behind the need for efficient growing techniques. The major contribution of this thesis is a computer vision algorithm for detecting greenhouse tomato pruning points without the use of depth sensors. Given an up-close 2-D image of a tomato stem with the background …

Comparative Analysis Of Physiological Measurements And Environmental Metrics On Predicting Heat Stress Related Events, Mckenzie Lee Barlow

Master's Theses

Exposure to high heat and humidity can lead to serious health risks, including heat exhaustion and heat stroke. Wet Bulb Globe Temperature (WBGT) and heat index have historically been used to predict heat stress events, but individualized factors are not included in the measurement. It has been shown that there is a relationship between cardiovascular measurements and heat stress, which could be used to measure heat stress risk on an individual level. Research has been done to find relationships between cardiovascular metrics in a workplace environment, however the study did not include the use of a controlled environment as a …

A Review Of Subsidence Measurements Near Mendota, California, Tom Mastin, Stuart Styles, Kyle Feist

BioResource and Agricultural Engineering

The image of Dr. Poland of the United States Geological Survey (USGS) standing next to a marked powerline in 1977 is circulated as a striking example of land subsidence. This and other historical data are common references for modern subsidence studies. Because of the significance of this data, recent work was conducted to analyze the historical data as well as independently measure the magnitude of subsidence since 1975, within the same study area southwest of Mendota, CA. The results indicate that local subsidence in the area of the photo is less than 0.5 meters between 1975 and 2017. Furthermore the …

Case Study: Flow Measurement And Control In Walker River Irrigation District, Stuart Styles, Sierra Layous, Robert Bryan

BioResource and Agricultural Engineering

Walker River Irrigation District (WRID) is located in Nevada around the community of Yerington and contains approximately 95,000 hectares (235,000 acres), 32,000 hectares (80,000 acres) of which are irrigated. The district operates a canal system centered around the three forks of the Walker River. Starting in 2009, the district has worked with the Irrigation Training and Research Center (ITRC) to modernize its system by improving the accuracy of the measured diversions from the Walker River and enhancing the real-time control capabilities of the water managers. A “package” was developed for the headworks of canals diverting water from the river, consisting …

Evaluation Of A Substitute Structure Method To Estimate Seismic Displacement Demand In Piers And Wharves, Rakesh K. Goel

Civil and Environmental Engineering

This paper compares seismic displacement from the MOTEMS and the ASCE/COPRI 61-14 substitute structure method (SSM) with results from the nonlinear response history analysis (NLRHA). It is found that the SSM is biased toward overpredicting displacement demand for short-period systems and under-predicting displacement demand for long-period systems. The overprediction was found to be excessive for very-short period systems (i.e., systems with periods shorter than the period at which the design spectrum transitions from linearly increasing spectral acceleration to constant spectral acceleration). It is recommended that the SSM not be used for such systems. It is also recommended that the SSM …

Wifi Gate Guard: A Captive Portal Implementation For Home Networks, Ben Blumenberg

Computer Science and Software Engineering

WiFi Gate Guard aims to improve the user experience for authentication on home wireless networks, by alleviating some of the hardships causes by passwords and by offering a platform on which further security enhancements could be built. It accomplishes this by using captive portal technology, making it extremely easy for guests to authenticate without needing to ask for a password. Home network administrators can approve or deny access using a simple iOS app. WiFi Gate Guard is built to run on basic home routers, with minimal other hardware requirements. Once it’s up and running, passwords never need to be used …

Analysis Of Verification And Validation Techniques For Educational Cubesat Programs, Noah Weitz

Master's Theses

Since their creation, CubeSats have become a valuable educational tool for university science and engineering programs. Unfortunately, while aerospace companies invest resources to develop verification and validation methodologies based on larger-scale aerospace projects, university programs tend to focus resources on spacecraft development. This paper looks at two different types of methodologies in an attempt to improve CubeSat reliability: generating software requirements and utilizing system and software architecture modeling. Both the Consortium Requirements Engineering (CoRE) method for software requirements and the Monterey Phoenix modeling language for architecture modeling were tested for usability in the context of PolySat, Cal Poly's CubeSat research …

Optimizing The Distributed Hydrology Soil Vegetation Model For Uncertainty Assessment With Serial, Multicore And Distributed Accelerations, Andrew Adriance

Master's Theses

Hydrology is the study of water. Hydrology tracks various attributes of water such as its quality and movement. As a tool Hydrology allows researchers to investigate topics such as the impacts of wildfires, logging, and commercial development. With perfect and complete data collection researchers could answer these questions with complete certainty. However, due to cost and potential sources of error this is impractical. As such researchers rely on simulations.

The Distributed Hydrology Soil Vegetation Model(also referenced to as DHSVM) is a scientific mathematical model to numerically represent watersheds. Hydrology, as with all fields, continues to produce large amounts of data …

Seismic Forces In Ancillary Components Supported On Piers And Wharves, Rakesh K. Goel

Civil and Environmental Engineering

This paper presents a simple procedure to estimate seismic forces in ancillary components (secondary systems) supported on marine structures such as piers, wharves, and marine oil terminals (primary systems). Since many such marine structures can be idealized as single-degree-of-freedom (SDOF) systems, this study uses a simple linear-elastic model with two DOF, one representing the marine structure and the other representing the ancillary component. This study shows that acceleration at the base of the secondary system is approximately equal to spectral acceleration at the fundamental period of the primary system. It also proposes a formula, which is an improvement over current …

Journeyman International – Kalisher Multi-Purpose Center, Chelsea Trumbull

Construction Management

The Kalisher Multi-Purpose Center in Rwanda was completed through a non-profit organization, Journeyman International. Dan and Frances Klinck created a vision for a master plan in the Sunzu Yacu Village in Rwanda and teamed up with Journeyman International to accomplish it. The Kalisher Multi-Purpose Center is the next step in completing their master plan. This center will serve as a place of gathering and community for the locals. It will house various events including, but not limited to: community meetings, private ceremonies, performances, church gatherings, learning opportunities and a space for growth. This project was interdisciplinary and combined efforts from …

Ji: Zimbabwe Rural School Development Program, Leor Rozen

Construction Management

Adjusting to the construction codes and processes of a foreign country is a very complex and involved process. There are considerations for different materials, procedures, costs, requirements, potential tribal or cultural conflict, corruption, and many other potential obstacles and challenges to overcome. While this project was seemingly simple, inexpensive, and straightforward, there was a significant amount of obstruction from the government concerning a coup that limited the team’s ability to apply for permission to begin construction. Additionally, there were significant changes in the design and budget as the project progressed, delaying our start date. Ultimately, this project should serve as …

Resiliency Vs Reality, Ainsley E. Henderson

Construction Management

This study analyzes the resilient design and construction features desired by Great Northern Services (GNS) for the design and construction of a new housing division in the City of Weed, California. This was compared to what the Cal Poly interdisciplinary student design teams were able to offer, by providing different design options. The study begins by showcasing the Boles fire and the connections that Cal Poly had made to support the City of Weed. The support was made through design and collaboration with Great Northern Services to create affordable housing. The study then discusses the needs that GNS wanted to …

Medicial Clinic At Mission Twentyfive35 Vocational Village - Dominican Republic, Sarah C. De Los Reyes

Construction Management

This community medical clinic will be the first of its kind in the rural town of Villa Tapia, Dominican Republic It is Phase II of a five-phase master plan drafted by religious organization Mission Twenty-Five35, founded by the Romano family The team consists of Cal Poly undergraduate students: Griffin Chierici (Architecture), Erica Croft and Tommy Sidebottom (Architectural Engineering), and Sarah De Los Reyes (Construction Management), backed by the guidance and support of non-profit organization Journeyman International and A/E firm Smith Group JJR The task was to design a clinic that would serve as a pediatric and urgent care center but …

Value Analysis Of Cm Professional Certifications For Newly Graduated Cm Students, Christopher John Coglianese

Construction Management

The construction industry has a staggering amount of professional certifications available to those who want to prove experience and expertise. There is usually a financial reason behind this. The more certifications a person has, the more likely he will be promoted and be paid more. As Cal Poly seniors entering the job market, they share these same incentives, and luckily there are plenty of certifications available to them. However, there are too many to choose from and some are too expensive. The question then lies, which certifications should graduating seniors spend their resources on? To answer this simple question, an …

Dominican Republic Community Center, Norris Lee Cooper

Construction Management

The Santiago Agriculture and Water Company will partner with the Amoveo Group and Mission TwentyFive35 in order to bring healthy and sustainable solutions to the overall project region known as “El Cibao” in the Dominican Republic. This facility focuses on the revitalization of the community with educational facilities like libraries, a green house, and agricultural landscaping. The project navigates the trials and complications often encountered with foreign humanitarian work by providing a rough construction schedule, budget, and analysis reports necessary to understand the project hazards.

Use Of Drone Technology On Commercial Construction Projects, Andrew Lin

Construction Management

Every successful construction project is an intricate symphony of project management, jobsite operations, and skilled laborers doing what they do best. While traditional means and methods have proven themselves to be reliable and effective, companies must now look into new and improved approaches to expedite their project delivery and maintain their competitive edge in this booming and demanding market. Furthermore, as expectations for new commercial projects grow, the risks of taking on these projects increase alongside them. Skyscrapers are expected to be taller, buildings more efficient, and company campuses vaster and more state-of-the-art than ever before. With technological innovations such …

A Comparative Study Of The Leed And Well Building Standards, Brent J. Zavada

Construction Management

Our current environmental and public health conditions have led our industry to create sustainability standards that address both of these current problems. With the addition of the WELL Building Standard, the first standard to solely focus on human health and wellness, it is now possible to promote public health, environmental conservation, and owner profits all in one project. This study looks to overlap the well-known LEED Certification standards with the new WELL standards to assist project teams in fully understanding what needs to be accomplished in order for their project to be on track for both certifications. It is meant …