Engineering Commons^™

Effect Of Aerogel On The Thermal Performance Of Corrugated Composite Sandwich Structures, Jacob Dillon Chess

Master's Theses

Current insulation solutions across multiple industries, especially the commercial sector, can be bulky and ineffective when considering their volume. Aerogels are excellent insulators, exhibiting low thermal conductivities and low densities with a porosity of around 95%. Such characteristics make aerogels effective in decreasing conductive heat transfer within a solid. These requirements are crucial for aerospace and spaceflight applications, where sensitive components exist among extreme temperature environments. When implemented into insulation applications, aerogel can perform better than existing technology while using less material, which limits the amount of volume allocated for insulation. The application of these materials into composites can result …

Generating Exploration Mission-3 Trajectories To A 9:2 Nrho Using Machine Learning, Esteban Guzman

Master's Theses

The purpose of this thesis is to design a machine learning algorithm platform that provides expanded knowledge of mission availability through a launch season by improving trajectory resolution and introducing launch mission forecasting. The specific scenario addressed in this paper is one in which data is provided for four deterministic translational maneuvers through a mission to a Near Rectilinear Halo Orbit (NRHO) with a 9:2 synodic frequency. Current launch availability knowledge under NASA’s Orion Orbit Performance Team is established by altering optimization variables associated to given reference launch epochs. This current method can be an abstract task and relies on …

Assessing Risk In Iot Devices, David Levitsky

Master's Theses

The explosive growth of the Internet of Things ecosystem has thrust these devices into the center of our lives. Unfortunately, the desire to create these devices has been stronger than the one to secure them. Recent attacks have shown us ignoring security in Internet of Things devices can cause severe harm in both a digital and physical sense. This thesis outlines a framework for developers and managers to assess the risk of IoT devices using a weighted scoring system across five different categories. Our case studies suggest that devices with higher security considerations have a better security posture and lower …

Micro-Nozzle Simulation And Test For An Electrothermal Plasma Thruster, Tyler J. Croteau

Master's Theses

With an increased demand in Cube Satellite (CubeSat) development for low cost science and exploration missions, a push for the development of micro-propulsion technology has emerged, which seeks to increase CubeSat capabilities for novel mission concepts. One type of micro-propulsion system currently under development, known as Pocket Rocket, is an electrothermal plasma micro-thruster.

Pocket Rocket uses a capacitively coupled plasma, generated by radio-frequency, in order to provide neutral gas heating via ion-neutral collisions within a gas discharge tube. When compared to a cold-gas thruster of similar size, this gas heating mechanism allows Pocket Rocket to increase the exit thermal velocity …

Investigating The Effect Of An Upstream Spheroid On Tandem Hydrofoils, Joel Tynan Guerra

Master's Theses

This thesis documents a series of three dimensional unsteady Reynolds Averaged Navier-Stokes CFD simulations used to investigate the influence of an upstream prolate spheroid body on tandem pitching hydrofoils. The model is validated by performing separate CFD simulations on the body and pitching hydrofoils and comparing results to existing experimental data. The simulations were run for a range of Strouhal numbers (0.2-0.5) and phase differences (0-π). Results were compared to identical simulations without an upstream body to determine how the body affects thrust generation and the unsteady flow field.

The combined time-averaged thrust increases with Strouhal number, and is highest …

Dc-Dc 4-Switch Buck-Boost Converter For Energy Harvesting From Elliptical Machines, Alexander C. Samietz, Gustavo Guzman

Electrical Engineering

The senior project report documents the process of replacing the network of resistors inside an elliptical machine with a DC-DC buck-boost converter. The buck-boost DC-DC converter accepts a wide input range of 5-60 Volts, with an output of 36 Volts for the most efficient use of the already available microinverter. The microinverter reclaims the lost energy and safely distributes it back to the electrical grid. The addition of this project reduces heat emissions from wasted energy and shrinks the carbon footprint of its users.

Test Bench Design For The Fontana Gaf Facility, Dalton Paul Wunderlich

Electrical Engineering

This senior design project consists of designing and building a test bench set up in the GAF facility located in Fontana CA. The project creates an area where testing of different configurations of equipment takes place before implementing the equipment on the production line. Having this isolated environment allows the engineers and technicians to follow several design build test iterations on new systems. The design has the versatility to handle different equipment set ups and test a large quantity of diverse situations. The test bench implements Allen Bradley ControLogix, PLC-5, multiple Powerflex drives and multiple Kinetix servo drives simultaneously. The …

Nanosatellite Launch Data-Logger (Sync), Christopher Martin Gerdom

Master's Theses

CubeSat designers are increasingly looking to incorporate delicate structures and optics into their payloads. These delicate payloads, however, may not survive the required absolute-worst-case launch vibration testing needed for flight certification. To help address this problem, and to better match testing conditions to real-world launch environments, this thesis introduces Sync, a compact 1/4U CubeSat payload designed to collect data on the vibrations and thermal environments CubeSats experience inside a deployer on the way to orbit. This data can be used to better understand the launch environment for different vehicles, and help develop new, more realistic testing guidelines that could enable …

Grid-Tied Solar System, Virginia Yan

Electrical Engineering

Distribution level solar energy generation has gained importance and popularity, because it helps create a sustainable electricity system while reducing the harmful environmental impacts our current power systems have. This project proposes an alternative energy source, a laboratory-scale grid-connected photovoltaic system. A KC120-1 solar panel produces 120 Watts maximum. A grid-tied solar power inverter does DC-to-AC conversion and minimizes energy transfer losses. The inverter also has an anti-islanding feature, which senses a power outage and prevents back-feeding through isolating the circuit. The circuit breakers isolate electrical components and protect the circuit. Schweitzer Engineering Laboratories SEL-751 feeder protection relay and SEL-735 …

3d Signal Strength Mapping Of 2.4ghz Wifi Networks, Brett D. Glidden

Electrical Engineering

Many commercial businesses operate out of multi-story office buildings. These companies often use many Wi-Fi access points to set up their own wireless network. IT personnel determine proper Wi-Fi access point placement using Wi-Fi strength maps. Conventional Wi-Fi strength maps only provide a two-dimensional view representing the wireless access point's effective range. The signal quality and strength measurements do not include changing vertical elevation. Efficient network layout in a multi-story building requires a system calculating signal quality metrics in three dimensions.

This project involves designing and prototyping a system to achieve 2.4GHz Wi-Fi signal quality measurements in a three-dimensional reference …

Building A Handicap Accessible Entrance And Gabion Wall, David C. Marter

Construction Management

As people age, their bodies naturally deteriorate and often times people are confined to wheelchairs in order to get around. Uneven and unstable ground is a large obstacle for people who live confined to a wheelchair. This project was derived and designed in order to help a family with multiple family members bound to wheelchairs to allow them an easier point of access into the home. The project itself consists of the construction of a concrete walkway and a gabion wall to provide some additional aesthetics. The concrete pathway ranges from the driveway to a paver pathway that curves around …

Overcoming The Challenges Of Asbestos Containing Materials In Remodels - A Case Study, Noah W. Champlin

Construction Management

This is a study of one project’s experience with delays caused by the need for asbestos abatement. It will also cover the best approaches for limiting both safety and financial risks to the contractor, subcontractors and owner. I wanted to gather information on this type of issue within our industry because there will be an increased need for large scale remodeling within major cities to keep them up to the level of standard people expect. This includes the more modern infrastructure of a building to accommodate for the technological improvements made in recent years and to provide a more comfortable …

Furnace System Improvements, Kenji K. Anzai, Ethan Fedor, Patrick Zailaa

Mechanical Engineering

This Final Design Review (FDR) documents the work done by the group to manufacture the system to deliver improvements to the furnace in the Cal Poly microfabrication laboratory (better known as the cleanroom). The document describes the material covered in the Scope of Work (SOW), including background research, customer needfinding, and the problem statement, material associated with concept development and selection for Preliminary Design Review (PDR), material detailing the design and manufacturing plan of the system for Critical Design Review (CDR), and new material detailing the manufacture of the system for FDR.

Research done for the SOW resulted in a …

Water Fun At Exploration Station Final Design Report, Brandon Dean Puccini, Sarah Rose Means, Natasha Tamlin O'Connell-Mackay

Mechanical Engineering

No abstract provided.

Reinventing The Wheel, Esther K. Unti, Ahmed Z. Shorab, Patrick B. Kragen, Adam M. Menashe

Mechanical Engineering

Reinventing the Wheel selected tires and designed wheels for the 2018 Cal Poly, San Luis Obispo Formula SAE combustion vehicle. Available tire options were evaluated for steady-state and transient performance as well as vehicle integration. A single-piece composite wheel with hollow spokes was designed to meet stiffness, strength, and tolerance requirements. A detailed study of wheel loading and geometric structural efficiency was performed. Finite element analysis was used to iterate the geometry and laminate. A two-piece male mold was designed and machined to manufacture the wheel. Removable silicone inserts were used to create the hollow spokes.

Wireless Ekg, James Kerman, Chin Chao, Galen Wu, Eric Burstedt

Mechanical Engineering

In 2016, Dr. Ahmad Nooristani identified a need for a personal EKG that is cheaper and simpler than hospital grade systems, but more accurate than personal devices currently on the market. Two previous teams did significant background research, prototyping, focusing on ease of use, portability, and physical specifications. However, neither team was able to produce a device with electrodes that could successfully collect an EKG signal and transmit it to a phone or tablet, one of the main requirements from the Dr. Nooristani. This team focused on designing a six lead, five electrode EKG device to transmit EKG data from …

All-Terrain Storage Surfboard Carts, Ben M. Kennedy, Danny Riedeman, Roberto Gonzalez

Mechanical Engineering

All Terrain Storage consists of three mechanical engineering students: Roberto Gonzalez, Ben Kennedy, and Danny Riedeman. The goal of All Terrain Storage is to design and create two portable storage devices for the non-profit organization AmpSurf. AmpSurf helps veterans, people with disabilities, and anyone else who could be helped through adaptive surfing and other outdoor activities. Their current method of storing and transporting equipment for events is carrying it from the trailer in the parking lot through the sand onto the beach. This document will provide: a more thorough introduction to AmpSurf and the project, the objectives, background information, the …

Daimscale — 1:14th Tractor-Trailer For Testing Driver Assistance Technology, Christopher Marrale, Jase Sasaki, Devin Bodmer

Mechanical Engineering

Active driver assistance systems are becoming increasingly wide-spread throughout the automotive industry due to their potential for safer roads and decreased costs of transportation, but testing these systems on real trucks can be time consuming, dangerous, and costly. Testing these systems on a small-scale tractor-trailer combination will lead to faster and more efficient development of driver assistance systems and can be used by both engineers and students, leading to a larger field of experienced developers to improve these systems.

Our goal will be to design, manufacture, and build a scale 6x2 model of the tractor portion of a Daimler semi-truck …

End Effector For Robotic Strawberry Picker Final Design Review, Marshall Cuffe, Cory Frederickson, Jimmy Jeffery

Mechanical Engineering

In this report, we have outlined the background of the problem and need for a solution to an automated form of strawberry harvesting. The report includes our research findings, defines the scope and objectives for this project, and documents our complete design process. Also included is our final, completed prototype, and a description of the manufacturing, design verification and testing process. Also included is our conclusions and recommendations for further improvement on future iterations.

Amplifying The Prediction Of Team Performance Through Swarm Intelligence And Machine Learning, Erick Michael Harris

Master's Theses

Modern companies are increasingly relying on groups of individuals to reach organizational goals and objectives, however many organizations struggle to cultivate optimal teams that can maximize performance. Fortunately, existing research has established that group personality composition (GPC), across five dimensions of personality, is a promising indicator of team effectiveness. Additionally, recent advances in technology have enabled groups of humans to form real-time, closed-loop systems that are modeled after natural swarms, like flocks of birds and colonies of bees. These Artificial Swarm Intelligences (ASI) have been shown to amplify performance in a wide range of tasks, from forecasting financial markets to …

Improving Ductility Of Slender Reinforced Concrete Shear Walls With Frp Sheets And Splay Anchors, Luke M. Ostrom

Architectural Engineering

The Sylmar earthquake of 1971 caused significant damage to slender, non-ductile reinforced concrete (RC) shear wall buildings in California. A later survey by the Concrete Coalition in 2011, under the guidance of EERI members, indicated that there are over 3000 vulnerable concrete buildings in California [8]. This led to City of Los Angeles (LA) Ordinance 193893 enacted in 2015, which requires mandatory upgrades to these concrete buildings by 2035. Current practice to meet the requirements of this ordinance, with respect to RC wall buildings, involves adding new shear walls to the building plan or increasing the cross-sectional area of existing …

Automation Of Post-Earthquake Civil Infrastructure Reconnaissance, Jack Bergquist

Architectural Engineering

Traditionally post-earthquake structural engineering reconnaissance consists of a team of experts who are deployed to the field to record and capture earthquake damage data, which is later uploaded into online repositories. Despite many advances to these data archives in recent years, the entries in online repositories often have limited metadata which make it difficult and time consuming to extract specific damage evidence that can be used for meaningful analysis. This report outlines the author’s contributions to overcoming these challenges via the development of a neural network that automatically filters and classifies post-earthquake civil infrastructure damage data after a seismic event. …

Solar Irradiance Microforecasting, Austin Jeffrey Fite, Sara Naseem Kipps

Computer Engineering

In late winter quarter 2018 the University of New Mexico and Microgrid Labs provided the Cal Poly Electrical Engineering department with their prototype Solar Irradiance Microforecasting (SIMF) hardware. This hardware was provided to the University under the lone condition that data collected with it would be returned to Microgrid Labs to train their weather model. The goal of this senior project was to take the provided hardware and software and make it usable for students in the Cal Poly Electrical and Computer Engineering departments to hack and expand. The end goal with the hardware is near term cloud and weather …

Single Arm Recumbent Bicycle, Alexander Borsotti, Ryan Westermann, Sean Liston

Mechanical Engineering

The goal of this report is to outline and cover the scope of work for the Single Arm Recumbent Bicycle Senior Project. The report will give an introduction of the problem, a background of the existing research or products relating to our project, the objectives of our project, our project management plan, our final design, manufacturing, testing, our project management, and final recommendations for improving the final design. The team is being supported by the Quality of Life Program, a non-profit organization that works to improve the lives of those injured in duty while serving our nation.

Up until now, …

Implementing Coordination Lab And Lesson Into Cm 413 - Job Site, Connor R. Westover

Construction Management

Coordination can make or break a job. The act of coordination and the millions of pieces that go into a single project can directly affect both the schedule and budget of a construction project. Coordination is not a single part of the job, it is an on-going process that continuously involves all entities of the project. The importance of coordination and what it entails is not yet captured in the Cal Poly Construction Management curriculum. The purpose of this project would be to capture that importance and continue to build upon it to better prepare Cal Poly Builders for the …

Bridging The Gap: 3d Modeling To Hands On Learning, Tyler J. Hecht

Construction Management

This project is a rework of Cal Poly Construction Management Building Information Modeling class, Revit Activity. The goal of the assignment is to teach the fundamentals and concepts of Autodesk Revit, and the tools that can be used within the construction industry. The model itself is based upon a hands-on lab that the Commercial Construction class builds. The modeling exercise allows students to model several key elements of a building, following a construction sequence. Following the modeling, the students will be able to create sheets and create their own plan set that was modeled. On those plan sets they will …

Hard Hat Safety By California Contractors, Jonathan G. Hernandez

Construction Management

The hard hat is the quintessential item of PPE, and yet it often gets overlooked when ensuring safety standards are being met. We all expect our hard hat to protect us, but many never inspect it to ensure that it is properly fulfilling its purpose. This disregard to inspection and maintenance can lead to serious injury or death in the event of an accident. While organizations such as OSHA and the hard hat manufacturers themselves post information on this topic, it is unclear if this information is actually being received by the people involved in a construction project. This research …

Improving Ductility Of Slender Reinforced Concrete, Luke M. Ostrom

Construction Management

The Sylmar earthquake of 1971 caused significant damage to slender, non-ductile reinforced concrete (RC) shear wall buildings in California. A later survey by the Concrete Coalition in 2011, under the guidance of members of the Earthquake Engineering Research Institute (EERI), indicated that there are over 3000 vulnerable concrete buildings in California [8]. This led to City of Los Angeles (LA) Ordinance 193893 enacted in 2015, which requires mandatory upgrades to these concrete buildings by 2035. Current practice to meet the requirements of this ordinance, with respect to RC wall buildings, involves adding new shear walls to the building plan or …

Virtual Reality And Its Applications In The Mockup Process: A Case Study, David B. Friend

Construction Management

Mockups are an important part of the construction process as they provide numerous benefits in both constructability review and aesthetic approval. Virtual Reality is an emerging technology that could prove to be a valuable addition to the mockup process. Many construction firms are attempting to incorporate virtual reality into any process they can --ranging from impressing owners in order to procure jobs to training employees so they can more adeptly adjust to field conditions. This paper will introduce virtual reality and some of its applications in the construction industry, specifically analyzing virtual reality and its applications in the mockup process …

A Comparative Analysis Of Regional Productivity Trends, Michael P. Foley

Construction Management

Throughout recent decades, the construction industry has suffered considerably from its inability to accurately target and measure key aspects of worker output that hinder productivity most. Much research has been conducted to analyze the factors contributing to labor productivity output at the work face, however, this dissertation is primarily focused on discovering key components of the building process that seem to hinder productivity from the perspective of the general contracting team. This paper’s literature review looks to address historical data relating to productivity difficulties specific to the construction industry, laborers’ productivity dilemma at the work face, and the resulting impact …