Engineering Commons^™

Wind/Hydro Power Generation Simulator, Justin Shaun Otus, Nicholas Joseph Steele, Patrick Daniel Murphy

Electrical Engineering

This project aims to design a wind or hydro power generation simulator. The original scope of this project was to construct a physical simulation apparatus in which wind/water speed data is fed to a microcontroller that adjusts the control voltage of a motor drive. The spinning DC motor would generate power via a coupled generator whose power output would be a scaled down version of wind/hydroelectric generator power output given the same wind/water speed input. Due to Covid-19, the project was altered to be entirely virtual and was made through Simulink in MATLAB. The virtual simulator attempts to mimic physical …

Biometric Identification With Ecg Signals, Connor Lindstrom, Jonathan Wood, Jacob Torchia, Jonathan Lee

Electrical Engineering

This project introduces a new form of biometric identification with an ECG signal with the use of machine learning concepts. The ECG signal makes a good candidate for identification because of its unique characteristics that make it easy to distinguish individuals from one another. A patient who has previously had ECG scans stored in a database before, can be verified using this program. This project has the capability of identifying a person or verifying a person solely using their ECG signal. Utilizing this biometric identification, hospitals would be able to add to the reliability of their identification process. Additionally, companies …

Controller Area Network (Can) Bus Simulator And Data-Logger For In-Vehicle Infotainment Testing, Sandra Roksic

Electrical Engineering

In the infotainment testing environment, various tools simulate a select range of Controller Area Network (CAN) bus signals onto the infotainment workbench. The integration of signal input devices and trace-gathering tools often results in a cluttered workspace and an inefficient testing environment. This project eliminates the need for multiple signal simulators and allows for a single system source for various input CAN-bus messages. This system enables the tester to store output CAN-bus data from the test vehicle for future reference and analysis through the same integrated system. It optimizes the time it takes the tester to complete testing catalogs and …

Single Axis Solar Panel Tracking Mount Using Stepper Motor And Accelerometer Positional Control, Ezra Pramono

Electrical Engineering

Optimal solar panel systems rotate to track the sun, as solar panels operate at their maximum potential when the panel plane is completely normal to the sun’s rays. These tracking systems often using two axes of movement. This project is to design a system that will allow a solar panel to track the sun using only one rotational axis, which saves energy and uses fewer parts. The system tracks the entire range of the sun's motion and has positional feedback to allow control of the solar panel's angle. The position of the tracking system is controllable via an external computer. …

Conducted And Radiated Emi Measurements Of Parallel Buck Converters Under Varying Spread Spectrum Parameters, Elena Postupalskaya, Nathan Wang

Electrical Engineering

The Conducted and Radiated EMI Measurements with Parallel Buck Converters Under Varying Spread Spectrum Parameters research senior project aims to explore the effects from Spread Spectrum Frequency Modulation (SSFM) on the input electromagnetic interference (EMI) or noise of a switching power supply, specifically with LM53601MAEVM hardware. The input EMI is important as the main input bus needs to be clean to provide a reliable source for other sensitive devices connected to it. SSFM can replace a conventional EMI filter and save weight, space, and cost. This project provides a basis in terms of the impacts of variable SSFM in simulation …

Pulsed Electric Field System Development For Algae Biofuel Extraction, Juan David Gonzalez Aguayo, Aspyn Bessler

Electrical Engineering

The search for sustainable alternatives to fossil fuels proves necessary due to the effects fossil fuels have on Earth’s environment. These alternatives must have a minimum ecological footprint and cause no long-term harm to the environment. An environmentally friendly fuel is necessary to usher in a generation of renewable green energy.

The production of algae refined biofuels becomes a possible solution to this growing issue. Algae absorb CO2from the atmosphere during their reproduction and growth cycles, yielding a positive environmental impact. As the biofuel is refined and becomes suitable for use, the combustion of the finished fuel generates an equal …

Energy And Economic Losses Due To Soiling On Utility Scale Pv Systems To Guide Timing Of Cost Effective Cleaning, Sophia Mcmillin Stockburger, Vicente Jesus Rios

Electrical Engineering

The purpose of this senior project is to develop and recommend a cleaning schedule for Goldtree Solar Farm that is both economically beneficial and an efficient use of cleaning for the client. Solar farms can have various factors that influence the cleaning schedule such as weather behavior, time of the year, soiling, and other factors. Through this senior project, the goal is to assess these factors effect on the solar farm to produce a cleaning schedule that will maximize energy production, maximize profits, and prevent insignificant cleaning

This analysis is motivated by defining and promoting the benefits of regular maintenance …

Polyone Smartphone, Joshua Zalmanowitz, Chi Nguyen, Gerome Cacho, Chris Lim

Electrical Engineering

The Poly One Smartphone is a student designed smartphone built to explore the implementation of 5G, provide a hardware solution to ensure personal information security and privacy, and provide longer battery life. The key features of this smartphone include but are not limited to a main cpu, some form of network connectivity in the form of Wi-fi or Cellular Data, calling functionality, a rechargeable battery that works with common power connection protocols, and compatibility with popular applications.

High Efficiency Rf Amplifier Design, Evan W. Johnson

Electrical Engineering

High efficiency RF power amplifiers are key to the operation of modern wireless systems. From reducing power consumption at base stations to increasing battery life in handsets, high efficiency amplifiers help system designers to meet key performance criteria for their customers. The advent of the Internet of Things and 5G will lead to mass proliferation of battery operated wireless devices, increasing demand for high efficiency systems. In this project, a high efficiency 4W narrowband PA operating at 1GHz is designed, built and tested for the IMS2020 high efficiency power amplifier (HEPA) design competition. Emphasis is placed on achieving maximum power-added …

Design And Development Of Laboratory Single-Axis Pv Module Tracker, Helen A. Rice, Delaney Berger, Avishek Maitra

Electrical Engineering

Solar energy is an integral part of the renewable energy industry. Advanced solar farms actively track solar movement and update solar panel angles to maximize the system’s output power. Cal Poly boasts its own Solar Farm that features a single-axis tracking system. Single-axis tracking aims to get panels as close to perpendicular as possible given the panel arrangements and given the time of year. Single-axis tracking is a more robust measurement and tracking option. Single-axis tracking systems usually only have East-West panel arc movement, following the sun’s rotation. Dual-axis trackers have both East-West and North-South panel arc movements. Dual-axis systems …

Efficiency Optimization Of Miso Converter, Gabriel Leonides, Christopher S. Peters, Lauren N. Rotsios

Electrical Engineering

In recent years, there has been a rapidly growing need for sustainable energy sources. This need comes from the increasing threat of climate change, significant population growth, as well as the effort to bring electricity to rural and underdeveloped areas across the world. The DC House project at Cal Poly aims to address these issues. The Multiple Input Single Output (MISO) converter is an integral part of the DC House project. The MISO converter is a system that connects multiple power sources to a DC bus. This allows the DC House to be powered by multiple types of renewable energy …

Engineering A Grapevine Pruning Training Tool For Use In Educational And Professional Environments, Catherine Anne Thornbury

Electrical Engineering

This report documents the design of a field-safe and portable tool that helps field hands identify how many wine grape nodes to prune per cane. This practice allows for a more bountiful harvest. The device indicates to the worker whether to leave one, two, or three nodes on a cane. The device is attachable to a set of industry-standard shears to allow for efficient and cost-effective pruning.

The device add-on can withstand a typical 8-hour workday and is able to be used in bright sun, clouds, and rain. Additionally, the device is able to differentiate between small, medium, and large …

Automated Score Tracking Cornhole Game, Mondona Behroozian, Harrison Overturf, Daniel Hurwitz

Electrical Engineering

Automated Score Tracking (AST) for Cornhole is a wireless system that allows for ease of game flow. Cypress Semiconductor’s new Bluetooth Low Energy (BLE) technology inspired the idea. The CYBT-213043-Mesh evaluation module allows for users to receive real time score data, from round to round. The CYW20819 Bluetooth Module located on the mesh evaluation board integrates the use of components on the module to reduce the use of external components. The Bluetooth module allows for the two game boards to communicate scores for each team per round. The system first needs to accurately award points to each team in order …

Post-Quantum Encryption Benchmark, Jordan David Churi

Electrical Engineering

Recent advancements in quantum computing bring the weaknesses in modern RSA encryption to the foreground. Shor's algorithm, though not implementable on today's quantum computers, shows that RSA asymmetric key encryption is not secure for the coming future. This flaw in the security has prompted the National Institute of Standards and Technology (NIST) to start a search for a new post-quantum encryption algorithm that will be resistant to future quantum computers. There are several implementations of preforming this encryption scheme. One promising technique is using lattices in an application called ring Learning with Errors (rLWE). Several algorithms have been submitted to …

Electric Motorcycle Lithium-Ion Battery System, Amman Fasil Asfaw, Donald J. Alexander

Electrical Engineering

This project entails the processes of design, construction, implementation, and testing of a lithium-ion battery system, including a battery management system, dedicated to converting a 1999 Honda XR100R motorcycle into a fully functional electric motorcycle. The battery system powers the motorcycle with enough voltage and amperage to sustain the needed power capability for a reasonable range. Providing an estimate of the voltage needed, the two largest loads, the DC motor and controller, draw about 48 to 60 volts from the battery for proper operation. Additionally, different aspects of the design also ensure safe operation, correct sizing, and maximum lifetime of …

Electrocardiographic (Ecg) Biometric Identification, Ryan Morosa, Charbel Ghantous

Electrical Engineering

Electrocardiography (ECG) is being used a lot more in biometrics for applications where protection of privacy is important. Other methods like facial recognition can be falsified by using different colored contacts to manipulate identification. For this reason, ECG is a viable option for biometric identification since it relies solely on the heartbeat to classify characteristics of an individual. The Pan-Tompkins method was used for feature extraction, and both ELM and correlation were used for classification. ELM through MATLAB achieved an average accuracy of 85%. Correlation achieved an average accuracy of 89.2%.

Dc Treasure Box, Michael A. Derrenbacher

Electrical Engineering

An all in one DC resource would enable electronics students to prototype circuits for labs and projects without the need for the lab equipment present on campus. The labs on campus can be physically far, closed, or overcrowded, preventing students from accessing the equipment. Roughly 75% of upper division electrical engineering students do not own power supplies, with even fewer students owning a source measurement unit (SMU). There is a significant need for a product capable of providing standard lab equipment functionality. The functionally this project provides are positive and negative DC power supplies, 4-Quadrant SMU, analog inputs and outputs, …

Composite Liftwalker For Shurouq, Daniel Martinez, Robert Boyd, Vikram Thridandam, Madeline Faase

Mechanical Engineering

The following document describes the scope of our project and the methods we have deployed in designing and manufacturing a personalized composite LiftWalker for a young woman in Egypt named Shurouq. Our objective is to design a lightweight and durable LiftWalker to improve upon the current product of our project sponsor, Charlie Gutierrez. To accommodate Shurouq’s physical disabilities as well as the limits of transporting the device to her by plane, our team will need to alter the current product’s dimensions, materials, and structure. Through researching similar products and interviewing potential customers, we have compiled engineering specifications to guide the …

Non-Invasive Peripheral Venous And Arterial Line Air Detector For Embolization Prevention, Alexandria Kwong, Kevin Shu, Dylan Meinster

Biomedical Engineering

The scope of this project includes designing a non-invasive bubble detector for peripheral venous and arterial lines. For minimally invasive cardiac procedures, arterial and venous access is necessary for these procedures as is constant flow through the tubing to prevent clotting and to administer drugs. Air bubbles are common in these lines and can be consequential if enough air is introduced into the human system. Air embolisms are the most common and relevant issues during these procedures. The goal of this device is to create an attachable detector for air bubbles in saline that can also terminate flow and alert …

Surf Sled, Marius Jatulis, Arthur Zaayer, Griffin O'Malley, Jose Covarrubias

Mechanical Engineering

This Final Design Review document outlines the process by which we designed and built a surfboard sled, nicknamed the “Beachin’ Buggy”, for the AmpSurf program. The document describes the goals and services that AmpSurf provides for those living with disabilities, and the current methods that volunteers use to transport people from to beach to the water and onto a surfboard. It then identifies the need for a new system for beach-to-water transportation, along with all specifications, constraints, and goals for the system. Background research will be introduced to relate similar products to this project, and their relevant features and parameters …

Spring Loaded Camming Device, Jared S. Christner, Kaitlin O. Deherrera, Ryan W. Edwards, John S. Hickey

Mechanical Engineering

Spring loaded camming devices or “cams” are used in traditional rock climbing as a means of active fall protection. Climbers place cams in cracks and fissures in the rock wall. The cam’s lobes press against the walls, locking it in place, anchoring the climber in case of a fall. Currently, there is a lack of large cams on the market. Only two small companies produce cams that are usable in cracks 6.5 inches wide and larger, however their designs are either too heavy and/or lack features to be comfortable. We are a group of mechanical engineering students at Cal Poly …

Portable Fluorescence Illuminator, Katherine Hui, Emran Baryal, Emmett Lambert

Mechanical Engineering

This Final Design Review (FDR) document outlines the senior design project implemented by a team of three mechanical engineering students at California Polytechnic State University, San Luis Obispo for a professor in the biochemistry and chemistry department, Dr. Javin Oza. The project involved designing and manufacturing a portable ultraviolet fluorescence illuminator that will indicate the fluorescent glow of biomaterials for viewing purposes. The goal was to create a portable product out of recyclable material that can be used in field applications and increase accessibility to affordable science equipment. The initial sponsor and user interviews, technical background research, product research, and …

Rsvp Spaceship!, Taylor Chavez, Deven Frauenhofer, Andrew Nott, Zoe Riesen

Mechanical Engineering

This document outlines the Final Design Review of a mechanical engineering senior design project at California Polytechnic State University San Luis Obispo. The project was to design and build a spaceship prop that will deploy during the performance put on by the Sound Design program within the Music Department. This performance, RSVP, is in its 25th year. Dr. Antonio G. Barata, the artistic director and producer of RSVP, is sponsoring the project. The key constraints include keeping the prop hidden in a confined space (under a stage that is comprised of multiple 4 ft. by 8 ft. by 3 ft. …

Inverted Fluorescence Microscope, Makenzie Lyn Kamei, Enoch Wright Nicholson, Eduardo Reyna Miranda Jr., Trevor John Brown

Mechanical Engineering

The Inverted Fluorescence Microscope senior project team at Cal Poly, San Luis Obispo designed, assembled, and tested a proof-of-concept inverted fluorescence microscope for the university’s Microfabrication Laboratory. Administrators of the laboratory wished to use fluorescence for research and experiments involving cell growth and flow visualization on the micro-scale, and did not have the budget to purchase one of the costly commercially available options. The scope of this design challenge was to produce a low-cost inverted fluorescence microscope employing available optical components and additional readily sourced parts to expand the use of fluorescence microscopy accessible to undergraduate students in the Microfabrication …

Sharpening Images Using Guidestars At The Hale Telescope, Jordan Alura Rupp, Jonah Kai Silva, Samantha Ahn Tran, Josh David Robinson

Mechanical Engineering

The SIGHT Senior Project team at Cal Poly San Luis Obispo designed and prototyped the Science Cryostat subsystem of the Sharpening Images using Guidestars for the Hale Telescope (SIGHT) Adaptive Optics system. SIGHT will improve the capabilities of astronomical observations and measurements at the Hale Telescopes using adaptive optics. SIGHT will consist of a Laser Guidestar (LGS) subsystem which focuses a UV laser into Earth’s high atmosphere, adjacent to a science target the Hale Telescope is observing. The LGS subsystem calculates how the laser light has been distorted by temperature and pressure differences as the light travels through the atmosphere. …

Thermal Energy Storage For Load Shifting, Jordan Benton Lopez Corley, Weston Cruz Montgomery, Taylor Glenn Harms

Mechanical Engineering

The following document accounts for the progress made in the prototype development of our design solution since the Critical Design Review, and our group’s response to recent world events which greatly impacted planned activities. Our design challenge is to develop a thermal energy storage system which will sequester the energy from a photovoltaic (PV) array during the day and allow for its dispersal at night in the form of near boiling water. Looking at our user’s needs, we broke our design solution into four components: water heating, storage, distribution, and controls. Research of all components was conducted to ascertain which …

Modular Cable Buoy, James J. Marinas, Gabriela Vargas, Anthony Catello, Joseph Heald

Mechanical Engineering

Cable terminations are often the least reliable and most expensive components of a maritime system. These cables are suspended in water by a buoy to reduce wear at the terminations. The Naval Information Warfare Center requires a modular auxiliary float with tunable buoyancy that can be placed along such cable. Our system must be able to be deployed, adjusted, and retrieved quickly and easily during operational use. This report focuses on our team’s final design concept and includes all analysis to justify our design direction along with safety, maintenance, and repair considerations. The report further elaborates on cost analysis, manufacture …

Design For Additive Manufacturing, Michael Charonnat, Leonardo Franco-Muñoz, Sam Noble, J.P. Purdom

Mechanical Engineering

This document outlines the critical design details and timeline for the Design for Additive Manufacturing Senior Project sponsored by Solar Turbines, Inc. The scope of this project encompasses the redesign of two of Solar Turbine’s cast parts for metal additive manufacturing in order to minimize lead time, cost, and weight. With the overall objective of performing in-depth analysis exploring affordability & feasibility, this redesign process will aid Solar Turbines in expanding their knowledge of Design for Additive Manufacturing principles and enable them to further incorporate the use of additive manufacturing into their production processes. The first part that the team …

Quick Mobile Power Unit Trailer Connections, Patrick A. Beahan, Sam Ali, Eric Allon, Benjamin Robinson

Mechanical Engineering

This Final Design Review document encompasses the entirety of a sponsored senior project which was conducted by a group of four undergraduate mechanical engineers at California Polytechnic University San Luis Obispo. The primary sponsor of this project was Solar Turbines, a subsidiary of Caterpillar Incorporated. Solar Turbines is in the business of development and application of modern-day energy solutions with a large focus on gas powered turbines. Cal Poly acted as a supplemental support of this project and provide the students with mentorship as well as access to its state-of-the-art facilities for the development of an innovative solution to the …

Adaptive Exercise Equipment, Jake Ryan Walejko, Spencer Goodman, Kalina Burns, Journey Martinson

Mechanical Engineering

This document outlines the senior design project carried out by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo. The task is to design adapted exercise equipment for the non-profit organization, Achievement House. The objective of this Final Design Review is to document the final design, manufacturing plan, design verification plan, and project management plan. In addition, this document includes previously presented information on the project background, objectives, and concept design. The background and objective sections document various forms of customer research and include the project goals developed by the athletes and fitness instructors of …