Engineering Commons^™

Alternatives To Oil-Based Binders For Asphalt Concrete Paving In Northern California, Parker E. Jenks

Construction Management

Every day, millions of Americans travel along highways and roadways during their everyday lives. Many people do not understand the vital impact that this infrastructure has on their day to day activities and what goes into building these roadways. The traditional process of using paving a roadway requires the use of an asphalt binder that is typically an oil-based binder. With the environmental effects of manufacturing and producing these oils, as well as the effects on the environment when the asphalt is placed, there have been a few accounts of producing an alternative asphalt binder that does not use oil. …

Development Of Bluebeam Curriculum For Construction Management Department In Virtual And In-Class Transmissions, Jacob K. Clark

Construction Management

This paper discusses the development of two new learning modules for the California Polytechnic University, San Luis Obispo Construction Management department on Bluebeam practices and usage that reflect industry and technological changes. Adapting to and maintaining practices in distance learning, this curriculum allows for optimal online education and further advancement and clarity in in-person transmissions. With step-by-step videos for optional distance learning, students and faculty can choose to engage in alternative modes of education delivery. Building on traditional roles of construction technology education, teaching instructions are provided for faculty. This project based senior project positively impacts the body of knowledge …

Workers Head Protection Preferences In Construction, Matthew R. Langbehn

Construction Management

Head injuries are one of the most common ways workers are injured on a construction site, but head protection has not evolved over the last few decades. A new style of head protection, a safety helmet is being introduced to better protect workers, but the new style has not been widely adopted. A survey was conducted to determine workers preferences when choosing head protection and 31 responses were collected. 68% of the respondents currently wear a safety helmet, but 60% of the respondents would choose a traditional helmet if given the choice. 73% workers with more than 5 years of …

Volumetric Modules For Mixed-Use Buildings: Logan At 51st - A Case Study, Abraham J. Ahmed

Construction Management

Modular construction has been a building technique since the 16^th century and has since been refined into one of today’s leading construction approaches. Modular construction is the process of manufacturing buildings or structures off-site. Modular construction is split into panelized systems which are two-dimensional system or volumetric system which are three-dimensional. This paper will examine the largest volumetric modular project, The Logan at 51^st, in the Bay Area which is set to be complete by the end of 2020. This paper will outline the current modular construction trend; the different types of modular construction; the process that …

Prioritizing Mental Health Awareness In The Construction Industry, Molly E. Pryde

Construction Management

The construction industry is known as one of the most demanding industries for employees, both physically and mentally. Due to various factors associated with the working conditions and lifestyles of construction workers, the likelihood of mental health challenges amongst this demographic is quite high. Furthermore, industry culture surrounding masculinity poses a barrier to properly addressing the issue. Because of the dynamic and fast-paced work environment, assessing potential risks to protect workers is an integral part of each day on the job site. As a key component in company success and individual well-being, safety has become ingrained in construction culture. However, …

Home Builders’ Perception Of Virtual Inspections: A Case Study, Kyle J. Morse

Construction Management

The COVID-19 pandemic created a new set of restrictions and safety protocols for the residential construction industry. Many jurisdictions began placing social distancing practices on inspectors, limiting their ability to visit the jobsite. The adjustment required many residential builders and inspectors to adapt to virtual inspections using videos, photographs, and recordings. As this new technology gains traction in the residential industry, questions arise regarding its benefits, drawbacks, and industry acceptance. This case study analyzes the perceptions and experiences of five separate homebuilders in Yolo County, California. Semi-structured interviews were conducted with five residential general contractors, transcribed, and thematically analyzed to …

Resequencing To Make Up Lost Time During The Covid-19 Pandemic: Case Study, Enzo Av Rienzi

Construction Management

Construction schedules are typically built by organizing activities according to trades as a whole. The entire foundation is poured, then the entire superstructure is erected, followed by interior framing, etc. However, for projects with an unchangeable finish date such as a school, other scheduling methods must be considered when the project is faced with uncontrollable, force majeure events which threaten to delay the project deadline. In order to examine the efficacy of alternative scheduling techniques, analysis of a $50 million school project will provide insight into how tasks can be safely overlapped to gain lost time in a schedule. This …

Implementation Of A 4d Schedule As A Project Communication Tool, Jared Jacobs

Construction Management

This report details the project that was completed to produce a preliminary 4D Schedule for the Alma Clark Glass Residence Hall on Western Washington University’s campus. A 4D schedule combines the 3D model of the building and the project schedule and ultimately shows the sequence of construction. The main objective of this project is to explore areas for improved communication strategies within the project team. A 4D schedule provides an added dimension of communication that has the potential, if delivered effectively, to clearly define construction milestones and sequences for an owner to understand. The goal of this project is to …

City Farm Slo - Walk-In Produce Coolbot Cooler, Connor Morinini

Construction Management

This paper describes the planning, financing, and construction of a commercial sized refrigerator for a non-profit urban farm in San Luis Obispo, CA, called City Farm SLO. Construction of the project occurred over a nine-month period from September of 2020 to May of 2021. The project involved building a Tuffshed, site grading, framing a room inside the Tuffshed, hanging a door, installing electricity inside the room, insulating the interior, painting the exterior, installing an air conditioner, and wiring the Coolbot to the air conditioner. The project was built to allow the non-profit organization to begin storing their agricultural crops in …

Automating Deep-Sea Video Annotation, Hanson Egbert

Master's Theses

As the world explores opportunities to develop offshore renewable energy capacity, there will be a growing need for pre-construction biological surveys and post-construction monitoring in the challenging marine environment. Underwater video is a powerful tool to facilitate such surveys, but the interpretation of the imagery is costly and time-consuming. Emerging technologies have improved automated analysis of underwater video, but these technologies are not yet accurate or accessible enough for widespread adoption in the scientific community or industries that might benefit from these tools.

To address these challenges, prior research developed a website that allows to: (1) Quickly play and annotate …

Simulation Of A Configurable Hybrid Aircraft, Brandon Bartlett

Master's Theses

As the demand for air transportation is projected to increase, the environmental impacts produced by air travel will also increase. In order to counter the environmental impacts while also meeting the demand for air travel, there are goals and research initiatives that aim to develop more efficient aircraft. An emerging technology that supports these goals is the application of hybrid propulsion to aircraft, but there is a challenge in effectively exploring the performance of hybrid aircraft due to the time and money required for safe flight testing and due to the diverse design space of hybrid architectures and components. Therefore, …

Hands-Free Electric Skateboard, Blaise M. Bibolet

Electrical Engineering

An electric skateboard functions as a skateboard propelled by electric motors. It is usually controlled with a handheld controller. This project describes an electric skateboard controlled via weight distribution. To accelerate, the rider leans forward, and to decelerate, the rider leans backward. It can travel 17 miles per hour and has regenerative braking to recharge the battery.

Ultra-High-Energy Neutrino Detection Antenna Simulations, Nicholas C. Garcia

Electrical Engineering

Neutrinos allow researchers to investigate high-energy galactic phenomena, such as supernovae and black holes. Neutrinos interact with their surroundings via the weak nuclear force and therefore, travel unattenuated through space and are not deflected by electromagnetic fields. However, they do rarely interact with other particles. When neutrinos interact with nucleons (protons or neutrons) in a dielectric medium (i.e.: ice sheets), they are detectable through a cone of coherent electromagnetic radiation (Askaryan Radiation) created by the particle shower generated from the neutrino interaction [1]. The Radio Neutrino Observatory in Greenland (RNO-G) detects UHE neutrinos greater than 100 PeV (10¹⁵ eV) …

Pilltank, Lucas Chang, Hayden Tam, Aaron Teh, Krista Round

Electrical Engineering

Imagine an elderly family member, going through their daily routine of taking their pills. They find their pill box; however, they are having trouble identifying all the pills in there. Is there a name on the tablet? Can they read what it says? Do they just trust that the medication in their box is correct? How can they properly take care of themselves if they can not even confirm that what they are taking is the right medication? To combat this issue that many face, we present PillTank.

To decrease the risk of consuming the wrong medication, PillTank identifies the …

Development Of A Low-Cost Hybrid Music Synthesizer, Spencer Rollins Drewry

Electrical Engineering

Until recently, affordable music equipment has always been seen as “budget”, providing a poor user experience. Inexpensive equipment was plagued with audible noise, signal integrity issues, and convoluted user interfaces. Companies like Teenage Engineering have proven that this does not have to be the case, in 2019 introducing their "Pocket Operator” series for $89. Due to the modern availability of low cost, high quality, consumer off the shelf [COTS] analog and digital components as well as creative engineering, the quality of inexpensive audio equipment has increased significantly. Despite these industry advances, the market is relatively small and shows a great …

Dc-Dc Buck Boost Converter Using The Lt8390 Controller And Gan High Electron Mobility Transistors, Juan Manuel Urbano Jr, Brian Thongchai Keokot

Electrical Engineering

California Polytechnic State University, San Luis Obispo’s ongoing Energy Harvesting from Exercise Machines (EHFEM) project creates a sustainable energy source by converting physical exercise from exercise machines into renewable electricity. Implementing energy harvesting technology into the Recreation Center’s exercise machines helps Cal Poly make progress on its goal of carbon neutrality by 2050 [1]. An improvement to the system with new technology increases Cal Poly Recreation Center’s ability to save money and improve sustainability.

The focus of this project improves the design of Nicholas Serres, who used the LT8390 controller in his buck boost DC-DC converter [2]. This project improves …

Wildfire Early Detection System (Weds), Mason Mciver, Vincent Liang, Jeanreno Racines

Electrical Engineering

With climate change causing an increase in temperature over the past several decades, wildfires have been burning hotter and moving quicker leaving a trail of destruction in their path. Detecting a wildfire early allows firefighters to respond efficiently and effectively to ensure containment. With the rise of advanced computer vision and algorithms, autonomous systems can be used to monitor and report any fire activity. Having multiple devices spread out across a large area will allow first responders to map out the fire location and track the fire. By utilizing smart technologies, property damage can be minimized and residents living in …

Miniaturized Ultraviolet Imager High Voltage Power Supply, Nicholas Palmer, Jason Thomas Heil

Electrical Engineering

Sending satellites into orbit becomes exponentially more expensive with weight and size, so designing high-voltage DC-DC converters that can achieve kilovolt level outputs in a small form factor is crucial to reducing costs. The Miniaturized Ultraviolet Imager (MUVI) aims to monitor Earth’s ionosphere and report weather patterns to climate scientists within a 2U cube satellite footprint. The imaging equipment consists of a microchannel plate and phosphor screen that require 2.5kV and 5.5kV respectively at microamp level currents. This report explains the implementation of a high voltage boost cascaded flyback converter to meet all of the MUVI satellite output voltage requirements. …

Robot Path Planning System, Filippo Cheein, Tim Berry, Bruce Rogstad, Bob Entezar, Jamari Ducre

Electrical Engineering

The future is autonomous. It is estimated that by 2025 there will be 8 million autonomous cars in the market. Millions more will be autonomous devices employed in homes, malls, offices, and warehouses. There are many aspects of these future devices that are necessary for proper autonomous functionality, with none potentially more critical than the devices’ path planning ability. This project aims to create an effective, reliable, and safe path planning algorithm for the autonomous devices of the future. Indoor autonomous devices, such as warehouse or office robots, benefit from being able to always use the same floor plan rather …

Metallurgical And Thermal Processing Investigation Of Additively Manufactured Superalloys Jbk-75 And Nasa-Hr-1, Allyse Birken, Derek Noel

Materials Engineering

Aerojet Rocketdyne is investigating the use of directed energy deposition (DED), an additive manufacturing process, to reduce cost and lead time for manufacturing complex rocket engine components for their RS-25 engines. JBK-75 and NASA-HR-1, two Fe-Ni-base, age-hardenable (γ′) superalloys, are used for nozzle structural jackets and hot gas manifolds. Currently, these parts are produced using traditional forging or casting methods followed by intensive machining operations. Additionally, these alloys were designed for use in the wrought condition and require a different set of post-processing heat treatments when produced using DED due to their dendritic, segregated microstructure in the as-built condition. Homogenization …

Warren J. Baker Center For Science And Mathematics California Polytechnic State University, San Luis Obispo Campus, Matthew Hudson

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to analyze the Warren J Baker Center for Science and Math on the California Polytechnic State University, San Luis Obispo campus. Baker Science is primarily used for classroom and laboratory instruction of college students, with study spaces, faculty offices, and assembly spaces. There are mechanical, electrical, and storage spaces ancillary to the main building functions. The building comprises six floors that are between 23,000 and 44,000 ft2. The first floor contains classrooms, faculty offices, mechanical/electrical spaces, and an auditorium with fixed seating. An atrium connects floors two through five. There are walkways running down …

Pod Stabilization, Lane Matthew Pledger, Becca Stefanich, Ian Mccandless, Patrick Salter, Kirk Kuran

General Engineering

We were tasked by Holmes Solutions to find a way to stabilize their patented SWITCHBACK passenger gondola system. This system is a self-propelled pod that transitions smoothly between cables and rails. The main goal for this project is to dampen side-to-side swing of gondola pods using a modular stabilization system. This device must be within these constraints: it must fit within a work envelope, must be safe for user and operator, must perform a dampening effect, and must be compliant with the current system. We formulated many ideas to achieve the goal, including making the pod more aerodynamic, adding sliding …

Sole On The Ocean Hotel, Dale Mcdowell

Fire Protection Engineering: Culminating Experience Project Reports

The following is an analysis of the fire protection systems and services at the Sole On The Ocean, Hotel (pronounced So-lay), Restaurant and Parking Building, located in Sunny Isles (Miami), Florida. Sole is used for temporary sleeping accommodations, business conference and restaurant purposes. The building is considered a high-rise building and is 24 Stories tall. The building occupancy classification is mixed used for Hotel (Residential), Restaurant (Assembly) and Parking (Storage). The prescriptive analysis was based on the Florida Building Code (FBC) which is identical to the International Building Code (IBC) with a few addendums. This report will adhere to the …

California Polytechnic State University – San Luis Obispo Building 180: Baker, Kelly Kessloff

Fire Protection Engineering: Culminating Experience Project Reports

This project was performed as part of the requirements for completion of the Fire Protection Engineering Master’s Program at Cal Poly. This project covers a full prescriptive and performance based analysis on the Warren J. Baker Center for Science and Mathematics. This building was constructed on Cal Poly’s campus in 2013 and serves occupancies such as classrooms, laboratories, and office space for students and professors.

The prescriptive based analysis of this report will analyze the applicable building codes and determine if this building is compliant. Relevant codes include the 2016 California Building and the 2016 California Fire Code. In addition …

Consumer-Ready Insulated Solar Electric Cooker, Simon Ford, Sachin Gokhale, Brendan Lynn, Richard Nguyen

Mechanical Engineering

An insulated solar electric cooker, or ISEC, converts solar energy into electricity to cook food, boil water, provide heat or even help charge batteries. In this project, the focus is an ISEC with a phase change material (PCM) that helps store heat when the solar energy input is minimal, such as after the sun has set. Although a successful ISEC already exists that utilizes PCM, this product can be improved in many ways. The specific revisions investigated in this report are the improvement of the thermal efficiency with the implementation of a vacuum-sealed outer pot, the reduction of the overall …

Interactive Physics Display: Air Cannon, Marina Smeltzer, Sydney Hosokawa, Jordan Nguyen, Jessica Ouyang

Mechanical Engineering

The San Luis Obispo Botanical Garden (SLOBG) is a non-profit organization that provides a place for visitors to connect with and explore nature. The sponsors from SLOBG sought an interactive physics display to be implemented in their children’s garden that will educate children and adult visitors about physics concepts in a welcoming and comfortable atmosphere. The research done showed that customers are looking for a “wow” factor with the display to surprise and engage them. Patents showed the design and build of interactive playground equipment. Government reports described the curriculum for the target audience and also outlined the safety precautions …

Sustainable Energy Storage, Jacob S. Grillo, Alyse C. Coonce, Jack R. Linchey, Nick P. Schnorr

Mechanical Engineering

This Final Design Review document covers the work we, students at California Polytechnic State University – San Luis Obispo, have performed in collaboration with Mr. Harish Bhutani and Dr. Mohammad Noori. The project’s intent is to create an energy storage system for off-grid and developing region applications using alternative technologies to lithium-ion battery storage. We plan to manufacture and assemble a scale model of the energy storage system to prove effectiveness and practicality. This system will store enough energy to power basic appliances and essential devices for a house or community. The chosen design direction will be a flywheel, as …

Configurable Seat Track Latching Mechanism, Emily Sun, Kai Quizon, Rick Hall, Daniel Turn, Nicholas Holman, Alexander Kuznik, Jacob Winkler, Audrey Trejo, Phoebe Zeiss, Steven Kam

Mechanical Engineering

The reconfigurable seating system is a flexible seating solution for transit vehicles that allows operators to change the configuration of the floor plan in a timely manner in order to accommodate change in needs. This project consists of three senior project teams each working on a component of the design: system, track & latch, and articulation. Descriptions of the responsibilities of each team will be discussed below.

Prosthetic Foot Shell, Christopher Menke, Colton Arbuckle, Jacob Rodriguez

Mechanical Engineering

Prosthetic foot shells are designed to fit around lower limb prosthetics to be able to fit shoes and several types of footwear. They are currently designed in a way that they wear through very quickly if used in an active lifestyle. The current designs on the market are designed for geriatric use. The sponsor for this project Mr. Dana Cummings, would like for the team to produce a product that extends current foot shell’s life. This document explains includes the team’s research process, the design process, and the main functions of what the team designed for. It will also show …

Composite Pegboard, Asa J. Cusick, Luis Corrales, Joelle Hylton, Wyatt Pauley

Mechanical Engineering

Many of those with mobility limitations who are told they will need a wheelchair for the rest of their lives can actually begin to stand and walk again given the proper tools and support. The current design for a wheelchair seeking to support this process is overly complex, heavy, and exhibits some features that could potentially pose a serious health hazard to those using it. The scope of this project is to aid in the design of an adaptable composite wheelchair frame that can be both lightweight and strong, while still allowing for physical diversity of potential users. Through research …