Engineering Commons^™

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

Ad-Hoc Regional Coverage Constellations Of Cubesats Using Secondary Launches, Guy G. Zohar

Master's Theses

As development of CubeSat based architectures increase, methods of deploying constellations of CubeSats are required to increase functionality of future systems. Given their low cost and quickly increasing launch opportunities, large numbers of CubeSats can easily be developed and deployed in orbit. However, as secondary payloads, CubeSats are severely limited in their options for deployment into appropriate constellation geometries.

This thesis examines the current methods for deploying cubes and proposes new and efficient geometries using secondary launch opportunities. Due to the current deployment hardware architecture, only the use of different launch opportunities, deployment direction, and deployment timing for individual cubes …

Biomedical Advancements In Injury Recovery, Performance Enhancement, And Mechanical Assistance Applied To Athletics, Matthew Russell

Biomedical Engineering

Athletics is constantly changing, and athletes are continually getting bigger, faster, and stronger. At the same time, biomedical technology and innovation is rapidly developing. New methods of injury recovery, genetic enhancement, and prosthetic assistance are being assimilated into the athletic world. The up and coming athlete needs to be aware of all of the usable information around them. This project is an accumulation of some of the cutting edge advancements in those fields. Platelet Rich Plasma Injections, Frequency Specific Microcurrent Treatment, and Silk Polymer Anterior Cruciate Ligament Replacement are innovative new ways to treat common sports injuries. Performance enhancement has …

Smart Wall Plug Design For The Dc House Project, Edward Constant Sibal

Master's Theses

The DC House project at Cal Poly State University faces a challenge of supplying DC voltage to household appliances. Each appliance in the DC House constitutes a DC load that has a unique voltage and power rating, hence the need to develop a smart DC wall plug that will automatically adjust to the operating voltage required by any DC load. This thesis entails a proof of concept design of the smart DC wall plug which can automatically detect an appliance’s voltage rating. The design employs a dc-dc converter in conjunction with a microcontroller to sense load current to properly adjust …

Optimizing The Mechanical Characteristics Of Bamboo To Improve The Flexural Behavior For Biocomposite Structural Application, Jay Lopez

Master's Theses

Global awareness and preservation have spurred increasing interest in utilizing environmentally friendly materials for high-performance structural applications. Biocomposites pose an appealing solution to this issue and are characterized by their sustainable lifecycles, biodegradable qualities, light weight, remarkable strength, and exceptional stiffness. Many of these structural qualities are found in applications that exhibit flexural loading conditions, and this study focuses on improving the bending performance of engineered biocomposite structures. The current application of biocomposites is increasing rapidly, so this expanding research explores other natural constituent materials for biocomposite structures under flexural loading.

The renewable material investigated in this study was experimentally …

The Synergistic Integration Of Computational Fluid Dynamics And Experimental Fluid Dynamics For Ground Effect Aerodynamics Studies, Tj Barber, G Doig, C Beves, I Watson, S Diasinos

Aerospace Engineering

This article highlights the ‘synergistic’ use of experimental fluid dynamics (EFD) and computational fluid dynamics (CFD), where the two sets of simulations are performed concurrently and by the same researcher. In particular, examples from the area of ground effect aerodynamics are discussed, where the major facility used was also designed through a combination of CFD and EFD. Three examples are than outlined, to demonstrate the insight that can be obtained from the integration of CFD and EFD studies. The case studies are the study of dimple flow (to enhance aerodynamic performance), the analysis of a Formula-style front wing and wheel, …

Al2O3 Oxide Morphology For Two Fe-Cr-Al Stainless Steel Foils Used In Gasoline Engine Catalytic Converters, Jennifer Suiter

Materials Engineering

Corrugated 0.05 in thick strips of Fe-Cr-Al ferritic stainless steel samples with 4% and 6% aluminum were heat treated, and the resulting Al₂O₃ oxide was analyzed using SEM imaging. Three heat treatment cycles were carried out for each sample. The heat treatments were based on future metal-substrate catalytic converter processing prior to applying the washcoat Each heat treatment started with a 90 minute ramp from room temperature to 538°C and a 32.5 minute ramp from 538°C to 899°C. The three different dwell periods at 899°C were 4 hours, 6 hours, and taking a sample out every hour …

Retrofitting A Car Alternator For Low-Speed Power Generation, Yuri Carrillo

Electrical Engineering

This report presents the analysis and methods taken to appropriately modify a car alternator to operate as a low speed generator for wind or hydro power generation. A Toyota car alternator taken from a junkyard is characterized via an Open-Circuit test to evaluate its operating specifications. The car alternator is also measured to determine its physical dimensions. The acquired values are used with the generated voltage equation to determine the machine’s unknown rotor values— the product of the rotor winding factor and the number of rotor windings (kfNf). Using the generated voltage equation with the determined machine parameters, the number …

Solar Powered Led Lantern For Developing Countries, Lacy Billingsly Iii

Electrical Engineering

In recent years, both LED and solar technology have become the focus of sustainable energy. LED lighting uses significantly less power than its fluorescent competitor. Solar cells enable clean, natural, and portable power. As these two entities become more efficient at exponential rates, the hope for the wide use of off-grid lighting in less developed countries seemingly increases at the same rate. Currently, there has been a development of industry for portable solar powered lighting systems. Before designing a product, a study was conducted of current products on the market that aim to light dark homes. This study and design …

Lunalight Project: Solar-Rechargeable Led Lantern And Cell Phone Charger, Sean C. Dawson, Michael E. Deagen, Francisco N. Dye, Brian S. Mircheff, Ryan O. Ramelb

Materials Engineering

Today, 1.6 billion people in the world do not have access to grid electricity. Villagers living off the grid in developing nations resort to kerosene lanterns to light their homes. The fumes from burning kerosene are toxic and lead to respiratory illnesses over time. Our sponsor, OneMillionLights, plans to help people to escape poverty by providing them with a clean source of light at night. Children that must work in the fields during the day can use a solar-rechargeable lantern at night to read or study, and street vendors can use the lanterns at night to improve their businesses.

The …

Ergonomic Improvement On The Farm/Garden Hoe, Yuan Chao Jiang

Industrial and Manufacturing Engineering

The hoes are widely used in the farms and home gardens in the United States. Many existing hoes are not ergonomically designed because they require a lot of back bending and wrist bending during use. Back bending often causes lower back injuries, and wrist bending often causes carpal tunnel syndrome. It can be very expensive to cure these injuries. The objective of this project is to reduce back bending and wrist bending by redesigning the hoe in an ergonomic perspective. In order to achieve the objective, ergonomics and human factors concepts are applied in the design. Two additional side handles …

Characterization Of A Dual Acoustic Receiver System For Measuring Range And Bearing To Acoustic Tags, Victoria Campana, Justin Knight

Computer Engineering

Experiements were performed to determine the effectiveness of the Lotek RT-A Hydrophone system and if it could provide the data necessary for a particle filter to determine the location of a shark. Over the period of a few months, we tested off the Cal Poly Pier at set GPS coordinates to characterize how accurately the Lotek System can determine range and orientation. Ranges from 0-500 meters were tested with the Lotek system being in a stationary position and Lotek receiver tag being put at specified GPS coordinates. The two hydrophone rigging was then rotated a full 360 degrees to gauge …

In-Plane Cyclic Shear Performance Of Interlocking Compressed Earth Block Walls, David William Bland

Master's Theses

This thesis presents results from testing of interlocking compressed earth block (CEB) masonry shear walls.  CEBs are low strength earth masonry units sometimes stabilized with cement or lime.  The interlocking compressed earth blocks (ICEBs) used in this experiment are dry stacked interlocking hollow units, which can be reinforced and grouted after they are laid.  Although significant research has been undertaken to optimize the material properties of CEBs, little has been done to investigate the performance of structural systems currently being built using this technology.

Test results are reported for three 1800 mm x 1800 mm wall specimens constructed with cement …

Portable Solar Desalination System, Genaro Sanchez, Alan Galarza, Erick Del Real

Electrical Engineering

Clean water and reliable energy can be difficult to obtain in remote locations such as desert villages, secluded islands, and other places where no fresh water can be found. The primary goal for this project is address these problems by implementing a portable desalinization plant system that is to be powered by solar energy PV system as the main energy source.

Investigation Of The Behavior Of Free-Standing Gabions In Seismic Regions, Amy Ransom

Master's Theses

This thesis investigates the behavior of free-standing gabion walls in areas of mild seismicity. To investigate this behavior, three walls of varying internal cable patterns were constructed at a quarter-scale. These walls were tested with a mass shaker, and mode shapes, tone extractions, and damping ratios were calculated. A modal analysis was conducted using design spectra created from a suite of seven earthquakes from countries bordering Kenya. The corresponding lateral forces to these spectral displacements were found, and the restoring eccentricities from the soil restoring force were backed out through a summation of moments. All analysis was experimentally done due …

Exploring Trade-Offs In Auv Controller Design For Shark Tracking, Louis James Bertsch Iv

Master's Theses

This thesis explores the use of an Autonomous Underwater Vehicle (AUV) to track and pursue a tagged shark through the water. A controller was designed to take bearing and range to the shark tag and then control the AUV to pursue it.

First, the ability of a particle filter to provide an accurate estimation of the location of the shark relative to the AUV is explored. Second, the ability of the AUV to follow the shark's path through the water is shown. This ability allows for localized environmental sampling of the shark's preferred path. Third, various path weightings are used …

Hydro-Electric Generation System For The Dc House Project, Dennis Kwan, Mitchell Krug

Electrical Engineering

This paper focuses on the design, integration, and construction of a system that harnesses energy from flowing water. The system will be used in conjunction with the DC House Project. The proposed system employs a DC generator and DC-DC Boost-converter to provide electricity to the DC House at approximately 200-300W. Results of the testing and measurement show that the goal of the system is feasible, but currently limited. The generator could not output the specified power. Details of the design, along with ideas for further improvement, are presented in this report.

Irrigation District Turnouts, Charles M. Burt

BioResource and Agricultural Engineering

This is meant to be a very quick, roughly written primer on irrigation district turnout selection. It by no means covers all of the details, but it might help out. ITRC offers flow measurement classes, with online registration at www.itrc.org. We have also done testing on quite a few designs over the years, but the work was almost all confidential in nature.

A Practical Approach To Computer Donation Supply Chain For Non-Profit Organizations, John Jacob Burrell, Adam Robert Carpenter

Industrial and Manufacturing Engineering

The United States today has a plethora of unused electronic equipment. This equipment comes from universities, small businesses, corporations, and many other sources. This project looks at the best way to put this equipment back to use for the remainder of its usable life by donating it to non-profit organizations in need. In order to complete this project it was necessary to research the areas of Supply Chain Management, Operations Research, and Engineering Economics. The approach for this specific project first involves analyzing the current donation process at California Polytechnic State University – San Luis Obispo, and its ability to …

Water Well Drilling Rig Final Project Report, Alexander (Alex) Wargnier, Thad Jablonski, Coel Schumacher

Mechanical Engineering

In this report, the improvements of a previously produced cable tool drilling rig are described. The purpose of the rig is to drill water wells for use in Africa in order to provide safe drinking water to many in need. An affordable, effective, and controllable rig is the design goal for this project. With the San Luis Obispo Rotary Club sponsoring the project the design team of WHole Engineering have made necessary design choices to manufacture the product. Actions performed include background research of existing drilling technologies, analysis of top concepts for the controlling mechanism, and selection for the final …

A Realistic Technology And Engineering Assessment Of Algae Biofuel Production, T. J. Lundquist, I. C. Woertz, N. W. T. Quinn, J. R. Benemann

Civil and Environmental Engineering

This report assesses the economics of microalgae biofuels production through an analysis of five production scenarios. These scenarios, or cases, are based on technologies that currently exist or are expected to become available in the near-term, including raceway ponds for microalgae cultivation, bioflocculation for algae harvesting, and hexane for extraction of algae oil. Process flow diagrams, facility site layouts, and estimates for the capital and operations costs of each case were developed de novo. This report also reviews current and developing microalgae biofuel technologies for both oil and biogas production, provides an initial assessment of the US and California …

Systems Engineering Analysis And Digital Communication Bus Design For The Cal Poly Super Project, Matt Marcus Camack

Master's Theses

With an expected lifetime of 20 years and an expected cost of $500, the Cal Poly Sustainable Power for Electrical Resources (SuPER) project needed a strong central design. This thesis looks at the work completed by students over the previous 5 years, with an eye on the future, to create the phase 2 design. Part of this new structure focuses on a distributed communication bus for monitoring system health and status. Instead of complex and costly computer or FPGA systems, the new system will run solely with microcontrollers. This reduces costs and will hopefully still be used within 5, 10, …

A Sustainable Business Proposition For Selling Irrigation Pumps In Ndola, Zambia, Robert Hosbach

Biomedical Engineering

Robert Hosbach is proposing a sustainable business plan to bring a small‐scale irrigation pump to rural Ndola, Zambia. With hundreds of thousands of citizens living in poverty and semi‐annual starvation, Ndola is in need of a means to grow crops effectively in the rainy season. Their current agricultural practices rely solely on the inconsistent rainfall during this time. My pump will be constructed from locally‐available aluminum cans, epoxy, glue, and fasteners (refer to Appendix B for technical drawings of the pump). The business will employ only a small number of Zambians, but will bring a means of food and income …

Increasing Productivity In Irrigated Agriculture: Agronomic Constraints And Hydrological Realities, Chris Perry, Pasquale Steduto, Richard C. Allen, Charles M. Burt

BioResource and Agricultural Engineering

Irrigation is widely criticised as a profligate and wasteful user of water, especially in watershort areas. Improvements to irrigation management are proposed as a way of increasing agricultural production and reducing the demand for water. The terminology for this debate is often flawed, failing to clarify the actual disposition of water used in irrigation into evaporation, transpiration, and return flows that may, depending on local conditions, be recoverable. Once the various flows are properly identified, the existing literature suggests that the scope for saving consumptive use of water through advanced irrigation technologies is often limited. Further, the interactions between evaporation …

Design-An Opportunity In Reducing Corrugated Fiberboard Carbon Footprint, Jay Singh, R. Kisch, J. Chhun, Eric Olsen

Industrial Technology and Packaging

Telescoping Half Slotted Containers (HSC) and Diagonal Corner Bliss style containers are popular choices for packaging agricultural products such as apples, pears, citrus, potatoes, garlic and most vegetables. This study evaluated two unique corrugated container designs, Kisch Full Circle Tray (FCT) and Single V Kisch Bliss, which are both viable designs available to replace the presently used styles of boxes for produce distribution. This paper presents the compression strength results of Telescoping HSC containers as compared to two possible replacements and the Diagonal Corner Bliss designs when stored under standard, refrigerated and tropical conditions. It also compares the material savings …

Simultaneous Nitrification And Denitrification Of Wastewater Using A Silicone Membrane Aerated Bioreactor, Kirk Hjelte Waltz

Master's Theses

The purpose of this thesis is to investigate the use of a single reactor to biologically treat wastewater by simultaneously oxidizing ammonia, and reducing nitrate and nitrite. The Environmental Protection Agency (EPA) places strict discharge restrictions on these compounds due to their inherent toxicity to humans, wildlife, and ecosystems. The use of a simultaneous system can assist the conventional wastewater treatment technology that requires separate systems, by creating a system that needs less time and smaller size to reach effluent requirements. To conduct this research, a bench-scale membrane aerated biofilm reactor was built using silicone tubing for aeration. Batch and …

Bioflocculation For Control Of Wastewater Pond Microalgae, Daniel Thomas Frost

Master's Theses

Investigates several hypotheses regarding the use of bioflocculation as a harvesting method for wastewater pond microalgae. Research performed on pilot-scale high rate ponds (HRPs) on the California Central Coast.

Interdisciplinary Team Teaching: Lessons For Engineering Instructors From A Capstone Course In Environmental Studies, David Braun, Emmit B. Evans, Randall Knight, Thomas Ruehr

Electrical Engineering

The capstone course teaches students to analyze global environmental issues, resources, and human activities with a systems approach based on scientific, economic, political, social and ethical perspectives. Such an intrinsically multifaceted subject demands interdisciplinary treatment. To deliver the interdisciplinary treatment, the course uses diverse faculty teams comprised of faculty from fields in the natural and social sciences, engineering, and business. This work describes the interdisciplinary team teaching strategies adopted for the course and how they evolved with subsequent offerings of the course. We present assessment data measuring how well students achieve course objectives. Finally, experience gleaned from this course for …

Volumetric Water Pricing, Charles M. Burt

BioResource and Agricultural Engineering

This document discusses the concept of volumetric pricing for irrigation water, including:

1. The justification for paying volumetrically

2. The challenge of charging volumetrically

3. Characteristics of volumetric charges and influencing factors

4. Examples of irrigation projects with volumetric charges

5. A summary of necessary conditions for volumetric billing

Experimental Investigation Of The Travel-Time Variance Of An Acoustic Wave Propagating Through The Grid-Generated Turbulence, Tatiana A. Andreeva, William W. Durgin

Office of the Provost Scholarship

An experimental technique for the investigation of the behaviour of acoustic wave propagation through a turbulent medium is discussed. The present study utilizes the ultrasonic travel-time technique to diagnose a grid-generated turbulence. Travel-time variance is studied versus mean flow velocity, travel distance and outer turbulence scale. The effect of thermal fluctuations, which result in fluctuations of sound speed, is studied using a heated-grid experiment. Experimental data obtained using ultrasonic technique confirm numerical and theoretical predictions of nonlinear increase of the travel-time variance with propagation distance, which could be connected to the occurrence of caustics. The effect of turbulent intensity on …