Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Brigham Young University

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 391 - 420 of 4850

Full-Text Articles in Engineering

Assuring Netlist-To-Bitstream Equivalence Using Physical Netlist Generation And Structural Comparison, Reilly Mckendrick, Jeffrey Goeders, Keenan Faulkner Dec 2023

Assuring Netlist-To-Bitstream Equivalence Using Physical Netlist Generation And Structural Comparison, Reilly Mckendrick, Jeffrey Goeders, Keenan Faulkner

Faculty Publications

Hardware netlists are generally converted into a bitstream and loaded onto an FPGA board through vendor-provided tools. Due to the proprietary nature of these tools, it is up to the designer to trust the validity of the design’s conversion to bitstream. However, motivated attackers may alter the CAD tools’ integrity or manipulate the stored bitstream with the intent to disrupt the functionality of the design. This paper proposes a new method to prove functional equivalence between a synthesized netlist, and the produced FPGA bitstream. The novel approach is comprised of two phases: first, we show how we can utilize implementation …

Go to article

Dam Failure And Incident Investigations, Nathaniel Gee Dec 2023

Dam Failure And Incident Investigations, Nathaniel Gee

Theses and Dissertations

There are multiple dam failures and dam safety incidents every year in the United States. There are currently no standard policy requirements for when or how to conduct failure or incident investigations. This paper first reviews one of the most significant failures in US history, the failure of Buffalo Creek Dam No. 3 in order to explore the impacts of one significant failure on dam safety policy in the US. The paper then explores the currents state of the industry by reviewing 58 different dam failure or incident investigation reports based on incidents that occurred in the United States from …

Go to article

Development Of Battery-Grade Silicon Through Magnesiothermic Reduction Of Halloysite-Derived Silica, Nathan Clarke Dec 2023

Development Of Battery-Grade Silicon Through Magnesiothermic Reduction Of Halloysite-Derived Silica, Nathan Clarke

Theses and Dissertations

The production of halloysite-derived silicon (HDS) is investigated as a potential anode material in lithium-ion batteries (LIBs). Other researchers have found HDS to be electrochemically active in small test cells. To test larger electrochemical cells, the production process needs to be scaled up and optimized. HDS is produced through magnesiothermic reduction of acid-etched halloysite. The reduction process is very exothermic and requires special consideration while being scaled up. A reactor and pressure release system were designed and fabricated to perform the reduction process in a safe manner. Various steps of the process were tested to determine their influence on the …

Go to article

Void Formation And Mortality During Liquid Composite Molding, Jared Michael Turner Dec 2023

Void Formation And Mortality During Liquid Composite Molding, Jared Michael Turner

Theses and Dissertations

Within the high-performance composite manufacturing industry, there exists a need to improve the reliability of LCM (Liquid Composite Molding) manufacturing processes in producing composite parts that better approach the quality and consistency of pre-impregnated composite tapes that are cured in autoclaves with cost being a driving factor of this need. One obstacle to that end is the phenomenon of void formation during the LCM infusion processes. The formation of these voids through different mechanisms leads to composite parts with lower mechanical properties and consistency than their pre-impregnated autoclave cure counterparts. The objective of this research is to investigate the different …

Go to article

Pullout Strength Of Welded Wire And Ribbed Strip Reinforcement In Lightweight Cellular Concrete Backfill Behind Mechanically Stabilized Earth Wall, Mathew Robert Bueckers Dec 2023

Pullout Strength Of Welded Wire And Ribbed Strip Reinforcement In Lightweight Cellular Concrete Backfill Behind Mechanically Stabilized Earth Wall, Mathew Robert Bueckers

Theses and Dissertations

Lightweight cellular concrete (LCC) is a cement, water, and air entrained mixture that consists of 25-80% voids. The air voids reduce the material strength but also decrease the material weight. Due to its lightweight properties LCC is an attractive alternative to soil backfill for retained structures, such as mechanically stabilized earth (MSE) walls. Although LCC is widely used behind MSE walls, limited information exists regarding the pullout strength of MSE wall reinforcements in LCC backfill. This research attempts to fill the knowledge gap through performing pullout tests on welded wire and ribbed strip reinforcements in MSE walls to determine the …

Go to article

Design And Fabrication Of Transparent Ultrasonic Transducers For Optoelectronic Applications, Stephen Colby Warren Dec 2023

Design And Fabrication Of Transparent Ultrasonic Transducers For Optoelectronic Applications, Stephen Colby Warren

Theses and Dissertations

Acoustic levitation utilizes general principles of ultrasonics to trap particles in midair without external support. This is done by creating an array of ultrasonic transducers to propagate sound waves to a focused point in space. In order to optimize the particle trap it is necessary to design transducers that can produce enough sound to create pressure pockets. In this work I examine the fundamental principles of acoustics by testing the sound pressure levels (SPL) of a known transducer in both air and water mediums. A comparison between domed and bimorphed transducers are also examined. Experimentation was performed on the feasibility …

Go to article

Lcc Mse Walls, Joel Smith Dec 2023

Lcc Mse Walls, Joel Smith

Theses and Dissertations

Lightweight cellular concrete (LCC) is mainly a mixture of water, cement, and foam bubbles. LCC generally has a cast density between 20-60 pcf and an air content between 49-84%. LCC is often used as a fill material because it has a low unit weight which reduces settlement. LCC is increasingly being considered as a backfill behind Mechanically Stabilized Earth (MSE) walls and embankments. Although engineers are using LCC in MSE walls or free face walls (MSE wall without the concrete panels or reinforcements), there is presently a lack of information regarding the performance and behavior of LCC to guide them. …

Go to article

Evaluation Of Unmanned Aerial Vehicle Flight Parameters That Impact Stockpile Volume Computations, Nicole Marie Hastings Dec 2023

Evaluation Of Unmanned Aerial Vehicle Flight Parameters That Impact Stockpile Volume Computations, Nicole Marie Hastings

Theses and Dissertations

Stockpile volumes are monitored by their companies as the product (i.e., aggregate, soil) is moved in and out of the facilities to ensure minimal product loss. Companies are mandated to report product movement to the government to ensure that the aggregate and soil is going where it is supposed to go. Many tools are used to monitor stockpile volumes including truck scales (to weigh incoming and outgoing trucks), light detection and ranging (LiDAR), Global Navigation Satellite System (GNSS) equipment, and unmanned aerial vehicle (UAV) photogrammetry. These processes give a good estimate of stockpile volumes. Errors in these estimates typically come …

Go to article

A Tunable System For High Frequency Bioimpedance Plethysmography, Daniel H. Tebbs Dec 2023

A Tunable System For High Frequency Bioimpedance Plethysmography, Daniel H. Tebbs

Theses and Dissertations

Bioimpedance measurements are useful for determining a variety of biological conditions. By accounting for small impedance variations due to the arterial pulse, the effect of the blood can be studied more closely. The quasi-circulator system presented enables monitoring of pulsatile impedance changes with input frequencies above 1 MHz. The adjustable Rmatch allows for dynamic tuning of the system to increase sensitivity. By tuning Rmatch to be near the match point, the pulsatile signal in the output magnitude can be amplified, and tuning Rmatch to be at the match point causes the pulsatile signal in the output phase to be amplified. …

Go to article

Combined Design And Dispatch Optimization For Nuclear-Renewable Hybrid Energy Systems, Daniel Clyde Hill Dec 2023

Combined Design And Dispatch Optimization For Nuclear-Renewable Hybrid Energy Systems, Daniel Clyde Hill

Theses and Dissertations

Reliable, affordable access to electrical power is a requirement for almost all aspects of developed societies. Challenges associated with reducing carbon emissions has led to growing interest in nuclear-renewable hybrid energy systems (N-RHES). Much work has already been done in suggesting and analyzing various N-RHES using a variety of optimization techniques and assumptions. This work builds upon previous techniques for simultaneous combined design and dispatch optimization (CDDO) for hybrid energy systems (HES). The first contribution of this work is the development and application of sensitivity analysis tailored to the combined design and dispatch optimization problem. This sensitivity analysis cover uncertainty …

Go to article

Simulating Incident Management Team Response And Performance, Daniel Jarvis Dec 2023

Simulating Incident Management Team Response And Performance, Daniel Jarvis

Theses and Dissertations

The effectiveness of Incident Management Teams (IMT) in reducing the duration and impact of traffic incidents is well-documented. The capacity of large-scale simulation models to illustrate the negative effects of these incidents on vehicle delays and excess user costs (EUC) is also widely recognized. However, there is a gap in research integrating large-scale simulation modeling with IMT performance analysis. This study uses the Multi-Agent Transport Simulation (MATSim) framework to simulate the impact of incidents and evaluate the performance of IMT across the regional network of Utah's Wasatch Front, analyzing their operation in various hypothetical situations. Our findings validate the role …

Go to article

Soft Robot Trajectory Generation: Enabling Soft Robot Arms To Reliably And Effectively Perform Real World Tasks Through Optimization, Haley P. Sanders Dec 2023

Soft Robot Trajectory Generation: Enabling Soft Robot Arms To Reliably And Effectively Perform Real World Tasks Through Optimization, Haley P. Sanders

Theses and Dissertations

The robotic platform presented in this thesis is underdamped with high inertia and can store potential energy in its compliant joints, making it ideal for many different types of real-world tasks for which traditional rigid-robots are ill-suited. Some real-world tasks suited to soft robots include high impact tasks like hammering a nail into a wall or moving heavy objects with other robot or human teammates while using relatively little power. Some of the same characteristics which make soft robots useful, such as their underdamped, highly compliant joints, also make motion planning and control for soft robots difficult. In this thesis, …

Go to article

Dynamic Segmental Kinematics Of The Lumbar Spine During Diagnostic Movements, Paul Mcmullin Dec 2023

Dynamic Segmental Kinematics Of The Lumbar Spine During Diagnostic Movements, Paul Mcmullin

Theses and Dissertations

While lumbar kinematics can be measured in vivo, most measurements are invasive (such as percutaneous bone pins), provide high doses of radiation (such as biplane fluoroscopy), or are taken with the patient in a static position (such as MRIs). Recent work suggests that lumbar kinematics can be determined by dynamic measurements of epidermal strain in the lower back. This work aims to develop and examine a method of examining lumbar kinematics via optoelectronic motion capture utilizing skin-mounted markers in the lumbar region. Two studies were performed. One study examined lumbar epidermal strain in 28 asymptomatic subjects during diagnostic movements, while …

Go to article

Drop Retention And Departure In Shear Flow On Structured Superhydrophobic Surfaces, Blake Morgan Lyons Dec 2023

Drop Retention And Departure In Shear Flow On Structured Superhydrophobic Surfaces, Blake Morgan Lyons

Theses and Dissertations

Water is often found adhering to surfaces in droplet form. Droplets can develop as a result of precipitation, condensation, or chemical reactions. Drops are retained or held on a surface due to a retention force exerted on the drop by the surface. This retention force is a function of the surface tension of the liquid, drop geometry, and the contact angle between the drop and the surface. When external or body forces exceed this retention force the drop begins to move. This thesis seeks to understand and quantify the forces present at the point of droplet departure once it begins …

Go to article

Development Of A Submerged Hydraulic Jump Prediction Method Using Documented Fatal Incidents At Low-Head Dams, Caleb Mccurry Dec 2023

Development Of A Submerged Hydraulic Jump Prediction Method Using Documented Fatal Incidents At Low-Head Dams, Caleb Mccurry

Theses and Dissertations

Low-head dams are known to be dangerous due to a recirculating current that, when formed, drowns recreationalists who become trapped in the current. Efforts to mitigate the hazard of low-head dams have led to the compilation of a database of low-head dams with proven fatalities. Additionally, flume-based experiments along with well-known hydraulic equations have been used to create a spreadsheet-based system for predicting the occurrence of the dangerous recirculating current, otherwise known as a submerged hydraulic jump. The premise of the spreadsheet is that if the normal depth calculated with the Mannings Equation for the downstream reach is between the …

Go to article

A Series Of Improved And Novel Methods In Computer Vision Estimation, James J. Adams Dec 2023

A Series Of Improved And Novel Methods In Computer Vision Estimation, James J. Adams

Theses and Dissertations

In this thesis, findings in three areas of computer vision estimation are presented. First, an improvement to the Kanade-Lucas-Tomasi (KLT) feature tracking algorithm is presented in which gyroscope data is incorporated to compensate for camera rotation. This improved algorithm is then compared with the original algorithm and shown to be more effective at tracking features in the presence of large rotational motion. Next, a deep neural network approach to depth estimation is presented. Equations are derived relating camera and feature motion to depth. The information necessary for depth estimation is given as inputs to a deep neural network, which is …

Go to article

Effectiveness Of Intelligent Transportation Systems On Utah Roadways, Matthew Cline Davis Dec 2023

Effectiveness Of Intelligent Transportation Systems On Utah Roadways, Matthew Cline Davis

Theses and Dissertations

This thesis presents the findings of a comprehensive research study conducted for the Utah Department of Transportation (UDOT) to evaluate the effectiveness of commonly deployed Intelligent Transportation System (ITS) treatments in Utah, with a focus on Variable Message Signs (VMS), traffic cameras, and Road Weather Information System(s) (RWIS) sites. The study aimed to determine the impact of these ITS treatments on mobility and safety for Utah's unique road conditions and configurations. Three primary analyses were performed: a diversion rates analysis to assess the effectiveness of VMS on Utah freeways during incidents; a weather analysis to evaluate the effectiveness of VMS …

Go to article

Advancements In Levitated Optomechanics: Exploring Plasmon-Enhanced Light-Matter Interactions In Optical Trapping, Siavash Mirzaei Ghormish Dec 2023

Advancements In Levitated Optomechanics: Exploring Plasmon-Enhanced Light-Matter Interactions In Optical Trapping, Siavash Mirzaei Ghormish

Theses and Dissertations

Optical trapping of metallic nanoparticles investigates phenomena at the interface of plasmonics and optical micromanipulation. This thesis combines ideas from the optical properties of metals, originating in solid-state physics, with the force mechanisms resulting from optical trapping. I explore the influence of enhanced light-matter interaction due to the plasmon resonances of gold particles on their trapping properties. I present theories for trapping mechanisms of gold metallic particles and then verify these theories through experiments. Optical trapping of metallic nanoparticles is considered challenging, especially in air, as they are highly absorbing and reflecting at optical wavelengths. Yet the optical levitation of …

Go to article

Investigating The Effects Of Unfused Powder Damping In Laser Powder Bed Fusion, Samuel Hao Teng Dec 2023

Investigating The Effects Of Unfused Powder Damping In Laser Powder Bed Fusion, Samuel Hao Teng

Theses and Dissertations

This study uses Additive Manufacturing (AM) processes to fabricate 316L stainless steel beams with pockets of unfused powder for increased damping. Modal testing was completed to compare damping factors of beams with varying pocket geometries as well as number of pockets and pocket location. For the first three bending modes that were tested, an initial damping increase was observed when pocket height is greater than powder diameter. Following the initial increase there is a height threshold, which is mode dependent, that is required to achieve a statistically significant increase in damping.

Go to article

Economy Of Scale Of Energy Intensity In Aquifer Storage And Recovery (Asr), Alyson Haley Rapp Dec 2023

Economy Of Scale Of Energy Intensity In Aquifer Storage And Recovery (Asr), Alyson Haley Rapp

Theses and Dissertations

More water utilities are adopting Aquifer Storage and Recovery (ASR) to balance long-term water supply and demand. Due to large implementation and operation costs, ASR projects need to be optimized, particularly for energy use, which is a major operating expense. This study examines the relationships among energy use, recharge, and recovery at two ASR projects in the western United States. The major finding is an economy of scale for recovery processes, but not for gravity-fed recharge processes. The economy of scale found is as follows: the energy intensity recovered decreases with volume. This suggests it is more energy-efficient to recover …

Go to article

Analysis And Simulation Of Nuclear Thermal Energy Storage Systems For Increasing Grid Stability, Jaron Wallace Dec 2023

Analysis And Simulation Of Nuclear Thermal Energy Storage Systems For Increasing Grid Stability, Jaron Wallace

Theses and Dissertations

With the growing capacity of renewable energy production sources, nuclear energy, once a mainstay of power generation, faces challenges due to its limited adaptability to fluctuating energy demands. This inherent rigidity makes it less desirable than the more flexible renewable sources. However, integrating thermal energy storage (TES) systems offers a promising avenue, enabling nuclear power plants (NPPs) to enhance their operational flexibility and remain competitive in an evolving renewable market. A comprehensive ranking methodology has been introduced, delineating the criteria and processes to determine the most synergistic TES/NPP design couplings. This methodology considers the unique characteristics of both current and …

Go to article

Using Jtag For External Scrubbing On The Amd Versal Acap, Michael L. Bjerregaard Dec 2023

Using Jtag For External Scrubbing On The Amd Versal Acap, Michael L. Bjerregaard

Theses and Dissertations

The Versal Adaptive Compute Acceleration Platform (Versal ACAP) is a system-on-chip (SoC) developed by AMD Xilinx. To help protect the programmable logic from soft errors, the configuration needs to be constantly checked and repaired through a process called scrubbing. This thesis provides a methodology for scrubbing the configuration over JTAG. The scrubber uses two platform device image (PDI) files, one to read the configuration and one to send corrected frames. The methodology is characterized to determine the time it takes to completely scrub the configuration. The designed scrubber was able to scrub the VM1802 in 11.5 seconds, or 41.6 Mbits/second, …

Go to article

An Inexpensive, 3d Printable, Arduino And Bluray-Based, Confocal Laser And Fluorescent Scanning Thermal Microscope, Justin Loose Dec 2023

An Inexpensive, 3d Printable, Arduino And Bluray-Based, Confocal Laser And Fluorescent Scanning Thermal Microscope, Justin Loose

Theses and Dissertations

The Fluorescence Scanning Thermal Microscope (FSTM v3.0), was designed to create an inexpensive, and easily manufactured, device for measuring the diffusivity of samples with microscopic locational precision. This was accomplished by using a Blu-ray device known as a PHR-803T, referred to in this work as a PHR. The optics in the PHR are nearly identical in function to conventional devices used in thermoreflectance microscopy, making the PHR extremely useful to integrate into the FSTM design. The focus of this thesis is the application of the FSTM as a confocal microscope using 3D printed components and various low-cost devices to operate …

Go to article

Modeling The Influence Of Vibration On Flow Through Embedded Microchannels, Joseph S. Seamons Dec 2023

Modeling The Influence Of Vibration On Flow Through Embedded Microchannels, Joseph S. Seamons

Theses and Dissertations

The influence of vocal fold (VF) vibration on perfused flow through VF vasculature is an area of research that has previously received limited attention. The aim of the research presented in this thesis was to contribute towards an improved understanding of the effects vibration on perfusion through vasculature within the VFs. This was done using a series of computational simulations of geometric changes to, and perfusion through, microchannels embedded in VF models. A computational structural model based on synthetic VF models used in previous experimental studies was first developed. The model and its embedded microchannel were initially studied under static …

Go to article

Coarsening Dynamics Of Ternary Polymer Solutions With Mobility And Viscosity Contrasts, Jan Ulric Garcia, Douglas R. Tree, Alyssa Bagoyo, Tatsuhiro Iwama, Kris T. Delaney, Glenn H. Fredrickson Dec 2023

Coarsening Dynamics Of Ternary Polymer Solutions With Mobility And Viscosity Contrasts, Jan Ulric Garcia, Douglas R. Tree, Alyssa Bagoyo, Tatsuhiro Iwama, Kris T. Delaney, Glenn H. Fredrickson

Faculty Publications

Using phase-field simulations, we investigate the bulk coarsening dynamics of ternary polymer solutions undergoing a glass transition for two models of phase separation: diffusion only and with hydrodynamics. The glass transition is incorporated in both models by imposing mobility and viscosity contrasts between the polymer-rich and polymer-poor phases of the evolving microstructure. For microstructures composed of polymer-poor clusters in a polymer-rich matrix, the mobility and viscosity contrasts significantly hinder coarsening, effectively leading to structural arrest. For microstructures composed of polymer-rich clusters in a polymer-poor matrix, the mobility and viscosity contrasts do not impede domain growth; rather, they change the transient …

Go to article

Design And Implementation Of A Software System For Measuring Cookstove Emissions In Peru, Cody Arvonen Dec 2023

Design And Implementation Of A Software System For Measuring Cookstove Emissions In Peru, Cody Arvonen

Undergraduate Honors Theses

The particulate matter (PM), carbon monoxide (CO), and carbon dioxide (CO2) emitted from cookstoves cause many potential health and environmental risks. This work outlines the design of a sensor system to accurately and affordably measure these gas quantities to aid in the certification of cookstoves for a laboratory in Peru. Our team was able to design and build this system at a price ten times reduced than the current commercial sensor unit in use. The performance of our sensor system was verified by comparing its PM and CO trends to that of the commercial unit. After testing, we …

Go to article

Thermal Atomization On Superhydrophobic Surfaces Of Varying Temperature Jump Length, Eric D. Lee, Daniel Maynes, Julie Crockett, Brian D. Iverson Dec 2023

Thermal Atomization On Superhydrophobic Surfaces Of Varying Temperature Jump Length, Eric D. Lee, Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

This paper presents an experimental study of drop impingement and thermal atomization on hydrophobic and superhydrophobic (SH) surfaces. Superhydrophobic surfaces having both microscale and nanoscale geometry are considered. Microscale SH surfaces are coated with a hydrophobic coating and exhibit micropillars and cavities which are classified using the surface solid fraction and center to center pitch. The solid fraction and pitch values explored in this study range from 0.05-1.0 and 8-60 μm respectively. Nanoscale textured surfaces are created by applying a blanket layer of carbon nanotubes. Both types of surfaces are further classified by a temperature jump length (λ …

Go to article

Advancements In Molten Salt Physical Property Measurement: Archimedean Density, Couette Viscometer, And Flibe-Te Solution Penetration Analysis, Kent Powell Detrick Nov 2023

Advancements In Molten Salt Physical Property Measurement: Archimedean Density, Couette Viscometer, And Flibe-Te Solution Penetration Analysis, Kent Powell Detrick

Theses and Dissertations

This work primarily centers on measuring the physical properties of molten salts. It's dedicated to outlining the methodology, enhancing measurement methods, and scrutinizing data to uncover insights regarding the interaction between molten salt and solid structures in the context of designing and generating electrical energy in molten salt reactors. The initial phase of this research involved collaborating with Brigham Young University's molecular dynamics simulation group to create an Archimedean density measurement device. This endeavor was primarily geared towards generating empirical data for the purpose of enhancing molecular dynamics simulation data. The tasks encompassed designing and validating the experimental setup, with …

Go to article

Equation-Based And Data-Driven Modeling: Open-Source Software Current State And Future Directions, Lagrande Gunnell, Bethany Nicholson, John Hedengren Nov 2023

Equation-Based And Data-Driven Modeling: Open-Source Software Current State And Future Directions, Lagrande Gunnell, Bethany Nicholson, John Hedengren

Faculty Publications

A review of current trends in scientific computing reveals a broad shift to open-source and higher-level programming languages such as Python and growing career opportunities over the next decade. Open-source modeling tools accelerate innovation in equation-based and data-driven applications. Significant resources have been deployed to develop data-driven tools (PyTorch, TensorFlow, Scikit-learn) from tech companies that rely on machine learning services to meet business needs while keeping the foundational tools open. Open-source equation-based tools such as Pyomo, CasADi, Gekko, and JuMP are also gaining momentum according to user community and development pace metrics. Integration of data-driven and principles-based tools is emerging. …

Go to article

Passive Positioning Using Linear Multilateration, Eric R. Widdison Nov 2023

Passive Positioning Using Linear Multilateration, Eric R. Widdison

Theses and Dissertations

Passive localization of aircraft in flight using signal time of arrival (TOA) poses some unique challenges. The sensors must be deployed in an approximately coplanar configuration, which produces significant vertical uncertainty in the estimated position. This dissertation examines the traditional algorithms used in passive localization. It presents general forms of linear TOA, time difference of arrival (TDOA), angle of arrival (AOA), and frequency difference of arrival (FDOA) equations from the literature and explains how to apply an intuitive geometric interpretation of these equations. It presents two novel algorithms for passive localization. One uses a one dimensional AOA (1AOA) to improve …

Go to article

First Prev Next Last