Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Brigham Young University

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3391 - 3420 of 4850

Full-Text Articles in Engineering

Safety Issues Among Hispanic Construction Workers Along The Wasatch Front In Utah, Phavel Israel Loayza Chahuayo Dec 2011

Safety Issues Among Hispanic Construction Workers Along The Wasatch Front In Utah, Phavel Israel Loayza Chahuayo

Theses and Dissertations

During the last few decades immigration by foreigners seeking work in the construction industry in the United States has increased dramatically. Of those seeking jobs in construction, Hispanics represent the largest and fastest growing population. The proportion of reportable accidents among Hispanic on-site construction workers in the United States is higher than that of non-Hispanics. This trend of on-site construction accidents is evident not only in states that have traditionally high populations of Hispanics, such as New York, Florida, California, Arizona, and Texas, it is also manifested in the State of Utah. This research focused on causes of accidents among …

Go to article

Chemical Templating By Afm Tip-Directed Nano-Electrochemical Patterning, Kyle A. Nelson Dec 2011

Chemical Templating By Afm Tip-Directed Nano-Electrochemical Patterning, Kyle A. Nelson

Theses and Dissertations

This work has examines the creation and use of chemical templates for nanocircuit and other nanodevice fabrication. Chemical templating can be useful in attachment, orientation and wiring of molecularly templated circuits. DNA origami provides a suitable method for creating molecularly templated circuits as DNA can be folded into complex shapes and functionalized with active circuit elements, such as semiconducting nanomaterials. Surface attachment of DNA origami structures can be accomplished by hybridization of dangling single-stranded DNA (ssDNA) on the origami structures with complementary surface-bound strands. Chemical templating provides a pathway for placing the patterned surface-bound attachment points needed for surface alignment …

Go to article

Modeling Solid Propellant Ignition Events, Daniel A. Smyth Dec 2011

Modeling Solid Propellant Ignition Events, Daniel A. Smyth

Theses and Dissertations

This dissertation documents the building of computational propellant/ingredient models toward predicting AP/HTPB/Al cookoff events. Two computer codes were used to complete this work; a steady-state code and a transient ignition code Numerous levels of verification resulted in a robust set of codes to which several propellant/ingredient models were applied. To validate the final cookoff predictions, several levels of validation were completed, including the comparison of model predictions to experimental data for: AP steady-state combustion, fine-AP/HTPB steady-state combustion, AP laser ignition, fine-AP/HTPB laser ignition, AP/HTPB/Al ignition, and AP/HTPB/Al cookoff. A previous AP steady-state model was updated, and then a new AP …

Go to article

Detail Extraction From Electron Backscatter Diffraction Patterns, John A. Basinger Dec 2011

Detail Extraction From Electron Backscatter Diffraction Patterns, John A. Basinger

Theses and Dissertations

Cross-correlation based analysis of electron backscatter diffraction (EBSD) patterns and the use of simulated reference patterns has opened up entirely new avenues of insight into local lattice properties within EBSD scans. The benefits of accessing new levels of orientation resolution and multiple types of previously inaccessible data measures are accompanied with new challenges in characterizing microscope geometry and other error previously ignored in EBSD systems. The foremost of these challenges, when using simulated patterns in high resolution EBSD (HR-EBSD), is the determination of pattern center (the location on the sample from which the EBSD pattern originated) with sufficient accuracy to …

Go to article

A Performance-Based Model For The Computation Of Kinematic Pile Response Due To Lateral Spreading And Its Application On Select Bridges Damaged During The M7.6 Earthquake In The Limon Province, Costa Rica, Kevin W. Franke Dec 2011

A Performance-Based Model For The Computation Of Kinematic Pile Response Due To Lateral Spreading And Its Application On Select Bridges Damaged During The M7.6 Earthquake In The Limon Province, Costa Rica, Kevin W. Franke

Theses and Dissertations

Lateral spread is a seismic hazard associated with soil liquefaction in which permanent deformations are developed within the soil profile due to cyclic mobility. Lateral spread has historically been one of the largest causes of earthquake-related damage to infrastructure. One of the infrastructure components most at risk from lateral spread is that of deep foundations. Because performance-based engineering is increasingly becoming adopted in earthquake engineering practice, it would be beneficial for engineers and researchers to have a performance-based methodology for computing pile performance during a lateral spread event. This study utilizes the probabilistic performance-based framework developed by the Pacific Earthquake …

Go to article

Damage Tolerance Of Unidirectional Basalt/Epoxy Composites In Co-Cured Aramid Sleeves, Devin Nelson Allen Dec 2011

Damage Tolerance Of Unidirectional Basalt/Epoxy Composites In Co-Cured Aramid Sleeves, Devin Nelson Allen

Theses and Dissertations

Unidirectional basalt fiber rods consolidated with an aramid sleeve were measured for compression strength after impact at various energy levels and compared to undamaged control specimens. These structural elements represent local members of open three-dimensional composite lattice structures (e.g., based on isogrid or IsoTruss® technologies) that are continuously fabricated using advanced three-dimensional braiding techniques. The unidirectional core specimens, nominally 8 mm (5/16") and 11 mm (7/16") in diameter, were manufactured using bi-directional braided sleeves or unidirectional spiral sleeves with full or partial (approximately half) coverage of the core fibers. The 51 mm (2") specimens were shorter than the critical buckling …

Go to article

Damage Tolerance Of Buckling-Critical Unidirectional Carbon, Glass,And Basalt Fiber Composites In Co-Cured Aramid Sleeves, Michael D. Embley Dec 2011

Damage Tolerance Of Buckling-Critical Unidirectional Carbon, Glass,And Basalt Fiber Composites In Co-Cured Aramid Sleeves, Michael D. Embley

Theses and Dissertations

Compression strength after impact tests were conducted on unidirectional composite rods with sleeves. These elements represent local members of open three-dimensional composite lattice structures (e.g., based on isogrid or IsoTruss® technologies). The unidirectional cores composed of carbon, glass, or basalt fiber/epoxy composites were co-cured in aramid sleeves. Sleeve patterns included both bi-directional (unsymmetric) braids and unidirectional spiral wraps with sleeve coverage ranging from nominally half to full. The diameters were nominally 8 and 11 mm (5/16 and 7/16 in). The larger diameter had nominally twice the cross-sectional area, to quantify the effects of scaling. The specimens were long enough to …

Go to article

Creativity And Innovation: A Comparative Analysis Of Assessment Measures For The Domains Of Technology, Engineering, And Business, Tyler Lewis Dec 2011

Creativity And Innovation: A Comparative Analysis Of Assessment Measures For The Domains Of Technology, Engineering, And Business, Tyler Lewis

Theses and Dissertations

The purpose of this literature review is to investigate and discuss: (1) the characteristics measured by innovation assessments, and (2) the comparison of characteristics measured by creativity assessments with those of innovation assessments. This will be done by: (1) collecting creativity and innovation assessments, and (2) comparing and contrasting the characteristics measured by each assessment. This study reveals that innovation assessments do not measure the innovation process in its entirety. The findings show that creativity and innovation assessments lack in assessing the entire innovation process, assessing the innovation process on an individual level, and assessing an individual's change or growth …

Go to article

Model Decomposition And Constraints To Parametrically Partition Design Space In A Collaborative Cax Environment, Felicia Diane Marshall Dec 2011

Model Decomposition And Constraints To Parametrically Partition Design Space In A Collaborative Cax Environment, Felicia Diane Marshall

Theses and Dissertations

An industry survey was conducted to collect information on current collaboration methods and project management and communication structures. The results, along with other design collaboration philosophies, were used to develop a method of coordinating users in a multi-user design space. These thesis methods will regulate collaboration and avoid user collisions in the same model space, either by cooperative interaction or by spatial decomposition with regional blocking. The method partitions the design space by integrating a graphical user interface tool into the engineering application used to define and assign the necessary tasks of the project. A simple implementation of this method …

Go to article

Development Of A Grond-Based High-Resolution 3d-Sar System For Studying The Microwave Scattering Characteristics Of Trees, Justin Frank Penner Dec 2011

Development Of A Grond-Based High-Resolution 3d-Sar System For Studying The Microwave Scattering Characteristics Of Trees, Justin Frank Penner

Theses and Dissertations

This thesis presents the development of a high-resolution ground-based 3D-SAR system and investigates its application to microwave-vegetation studies. The development process of the system is detailed including an enumeration of high-level requirements, discussions on key design issues, and detailed descriptions of the system down to a component level. The system operates on a 5.4 GHz (C-band) signal, provides a synthetic aperture area of 1.7 m x 1.7 m, and offers resolution of 0.75 m x 0.3 m x 0.3 m (range x azimuth x elevation). The system is employed on several trees with varying physical characteristics. The resulting imagery demonstrates …

Go to article

A Framework For Studying The Physical Degradation Characteristics Of Dvds And Their Relationship To Digital Errors, Brian K. Saville Dec 2011

A Framework For Studying The Physical Degradation Characteristics Of Dvds And Their Relationship To Digital Errors, Brian K. Saville

Theses and Dissertations

The methods used to store data on DVD-R discs have been proven to work over the last 15 years. However, there has been a growing concern that these discs will be outlasted by the paper records they were meant to replace. The data on a DVD-R is stored as optical contrasts which have the potential to be misread and even damaged. This damage may occur either on the surface or internally to the disc, especially on the recording layer itself. The literature is saturated with studies attempting to determine the time period in which discs may fail and what the …

Go to article

Reduction In Wick Drain Effectiveness In Typical Utah Clays, Gabriel M. Smith Dec 2011

Reduction In Wick Drain Effectiveness In Typical Utah Clays, Gabriel M. Smith

Theses and Dissertations

Consolidation theory states that decreasing the spacing of prefabricated vertical drains will decrease the time required to achieve primary consolidation. Previous field tests have shown that there exists a "critical" drain spacing, which is the point at which further spacing decrease does not decrease the time of primary consolidation. This "critical" spacing is thought to be due to disturbance effects from installation of the drains. Previous studies have found that the "critical" drain spacing may be dependent upon soil layering and drain and mandrel dimensions. Thin, interbedded clay layers have been found to be affected greatly due to the smear …

Go to article

Strength Of Concrete Masonry Prisms Constructed With Non-Traditional Grout And Type-M Mortar, Scott Michael Watterson Dec 2011

Strength Of Concrete Masonry Prisms Constructed With Non-Traditional Grout And Type-M Mortar, Scott Michael Watterson

Theses and Dissertations

The Concrete Masonry Association of California and Nevada in conjunction with Brigham Young University devised a masonry prism testing scheme to aid in the determination of whether prisms constructed with grouts possessing high levels of supplemental cementitious materials could meet minimum masonry compressive strength requirements. ASTM standards, identical to that of concrete, place restrictions on quantities, by weight, of supplemental materials that can replace ordinary Portland cement. For an all fly ash replacement, up to 40% of Portland cement can be replaced while up to 70% can be replaced by a fly ash-slag combination. Research is focused on class F …

Go to article

Selective Deposition Of Metallic And Semiconductor Materials Onto Dna Templates For Nanofabrication, Jianfei Liu Nov 2011

Selective Deposition Of Metallic And Semiconductor Materials Onto Dna Templates For Nanofabrication, Jianfei Liu

Theses and Dissertations

This work examines the selective deposition of metallic and semiconductor materials onto DNA templates for the fabrication of nanodevices. DNA origami provides a simple and robust method for folding DNA into a variety of shapes and patterns and makes it possible to create the complex templates needed for nanodevices, such as nanoelectronic circuits, plasmonics, and nanosensors. Metallization of DNA origami templates is essential for the fabrication of such nanodevices. In addition, selective deposition of semiconductor materials onto the DNA template is of importance for making many nanodevices such as nanocircuits. Metallization of DNA origami presents several challenges beyond those associated …

Go to article

Influence Of Supraglottal Geometry And Modeling Choices On The Flow-Induced Vibration Of A Computational Vocal Fold Model, Timothy E. Shurtz Nov 2011

Influence Of Supraglottal Geometry And Modeling Choices On The Flow-Induced Vibration Of A Computational Vocal Fold Model, Timothy E. Shurtz

Theses and Dissertations

Computational models of the flow-induced vibrations of the vocal folds are powerful tools that can be used in conjunction with physical experiments to better understand voice production. This thesis research has been performed to contribute to the understanding of vocal fold dynamics as well as several aspects of computational modeling of the vocal folds. In particular, the effects of supraglottal geometry have been analyzed using a computational model of the vocal folds and laryngeal airway. In addition, three important computational modeling parameters (contact line location, Poisson's ratio, and symmetry assumptions) have been systematically varied to determine their influence on model …

Go to article

Improved Stereo Vision Methods For Fpga-Based Computing Platforms, Wade S. Fife Nov 2011

Improved Stereo Vision Methods For Fpga-Based Computing Platforms, Wade S. Fife

Theses and Dissertations

Stereo vision is a very useful, yet challenging technology for a wide variety of applications. One of the greatest challenges is meeting the computational demands of stereo vision applications that require real-time performance. The FPGA (Field Programmable Gate Array) is a readily-available technology that allows many stereo vision methods to be implemented while meeting the strict real-time performance requirements of some applications. Some of the best results have been obtained using non-parametric stereo correlation methods, such as the rank and census transform. Yet relatively little work has been done to study these methods or to propose new algorithms based on …

Go to article

Using Commodity Flow Data For Predicting Truck Freight Flow On State Truck Routes, Goangsung Jin Nov 2011

Using Commodity Flow Data For Predicting Truck Freight Flow On State Truck Routes, Goangsung Jin

Theses and Dissertations

The increase in truck traffic on highways has brought many problems and challenges to transportation planning and traffic operation, including traffic congestion, transportation system deficiency (insufficient truck parking, etc.), safety, infrastructure deterioration, environmental impacts (air quality and noise), economic development, and so forth. Along with the increase in truck traffic, the need for developing a statewide truck freight demand model has grown so that a state can estimate truck traffic at any point on its highways. The most significant hurdle to including freight transportation in the transportation modeling process is that most of the demand forecasting methodologies currently available were …

Go to article

Bonding Of Polydimethylsiloxane Microfluidics To Silicon-Based Sensors, Long-Fang Tsai, William C. Dahlquist, Seunghyun Kim, Gregory P. Nordin Nov 2011

Bonding Of Polydimethylsiloxane Microfluidics To Silicon-Based Sensors, Long-Fang Tsai, William C. Dahlquist, Seunghyun Kim, Gregory P. Nordin

Faculty Publications

We investigate bonding polydimethylsiloxane (PDMS) to silicon using a thin (~2μm) intermediate adhesive layer stamped onto a PDMS piece prior to bonding. In particular, we compare as adhesive layers Sylgard 184 and 182 curing agents and a UV curable adhesive (NOA 75). We examine the effect of both curing temperature and duration on curing agent bond strength. Bond strengths for the different adhesives are determined by measuring the average burst pressure at a PDMS-silicon interface using a PDMS test design. We find that Sylgard 184 curing agent gives the highest bond strength with burst pressure of 700 kPa or more …

Go to article

Surface Modification Of Liposomes Containing Nanoemulsions, Jonathan Michael Hartley Nov 2011

Surface Modification Of Liposomes Containing Nanoemulsions, Jonathan Michael Hartley

Theses and Dissertations

Many attempts have been made to make cancer therapy more selective and less detrimental to the health of the patients. Nanoparticles have emerged as a way to solve some of the problems of traditional chemotherapy. Nanoparticles can provide protection for the therapeutic from degradation or clearance, as well as protection to healthy tissue from the damaging effects of chemotherapy drugs. Researchers are pursuing different strategies but all have the same goals of improving the outcomes of cancer patients. The field of controlled release of drugs has increased significantly in hopes of better treating diseases like cancer. Improved control of drug …

Go to article

Bearing-Only Cooperative-Localization And Path-Planning Of Ground And Aerial Robots, Rajnikant Sharma Nov 2011

Bearing-Only Cooperative-Localization And Path-Planning Of Ground And Aerial Robots, Rajnikant Sharma

Theses and Dissertations

In this dissertation, we focus on two fundamental problems related to the navigation of ground robots and small Unmanned Aerial Vehicle (UAVs): cooperative localization and path planning. The theme running through in all of the work is the use of bearing only sensors, with a focus on monocular video cameras mounted on ground robots and UAVs. To begin with, we derive the conditions for the complete observability of the bearing-only cooperative localization problem. The key element of this analysis is the Relative Position Measurement Graph (RPMG). The nodes of an RPMG represent vehicle states and the edges represent bearing measurements …

Go to article

Analysis Of Coal By Static Time-Of-Flight Secondary Ion Mass Spectrometry (Tof-Sims), Lei Pei, Guilin Jiang, Larry Lin Baxter, Matthew R. Linford Nov 2011

Analysis Of Coal By Static Time-Of-Flight Secondary Ion Mass Spectrometry (Tof-Sims), Lei Pei, Guilin Jiang, Larry Lin Baxter, Matthew R. Linford

Faculty Publications

Coal remains a primary fuel for power generation. Herein we present time-of-flight secondary ion mass spectra (ToF-SIMS data) taken with a Ga primary ion beam from ca. 30 coal specimens. These commercially different coal specimens were obtained from coal mining companies and/or power plants. They represent all major coal types used in power generation (bituminous coals, subbituminous coals, and lignites), and include low-rank materials (lignites and subbituminouscoals), which are represented as a minor portion of the data. Often, inorganic ions (Na, Al, Si,and K) are pronounced in the spectra, overshadowing peaks from organic moieties. This reflectsthe high sensitivity of SIMS …

Go to article

Microstructural Evaluation In Friction Stir Welded High Strength Low Alloy Steels, Majid Abbasi Gharacheh Nov 2011

Microstructural Evaluation In Friction Stir Welded High Strength Low Alloy Steels, Majid Abbasi Gharacheh

Theses and Dissertations

Understanding microstructural evolution in Friction Stir Welding (FSW) of steels is essential in order to understand and optimize the process. Ferritic steels undergo an allotropic phase transformation. This makes microstructural evolution study very challenging. An approach based on Electron Backscattered Diffraction (EBSD) and phase transformation orientation relationships is introduced to reconstruct pre-transformed grain structure and texture. Reconstructed pre-transformed and post-transformed grain structures and textures were investigated in order to understand microstructural evolution. Texture results show that there is evidence of shear deformation as well as recrystallization in the reconstructed prior austenite. Room temperature ferrite exhibits well-defined shear deformation texture components. …

Go to article

Quantifying Mass Sediment Movement In Deer Creek Reservoir During Spring Runoff And Potential Water Quality Impacts, Colin Rodger Ricks Oct 2011

Quantifying Mass Sediment Movement In Deer Creek Reservoir During Spring Runoff And Potential Water Quality Impacts, Colin Rodger Ricks

Theses and Dissertations

The accurate prediction of water quality is essential for management of reservoirs used for drinking water supply. Since algae are a major source of taste and odor problems in drinking water, understanding and controlling algal growth and production is an important task. Deer Creek Reservoir supplies drinking water for over one million people in northern Utah and has been highly eutrophic in the past. Despite major reductions in external nutrient loading, including phosphorus, seasonal algal blooms in Deer Creek have not decreased to desired levels. Resuspension of sediment has been suggested as a potential source of internal nutrient loading for …

Go to article

Aerial Rendezvous Between An Unmanned Air Vehicle And An Orbiting Target Vehicle, Mark Andrew Owen Oct 2011

Aerial Rendezvous Between An Unmanned Air Vehicle And An Orbiting Target Vehicle, Mark Andrew Owen

Theses and Dissertations

In this thesis we develop methods that facilitate an aerial rendezvous between two air vehicles. The objective of this research is to produce a method that can be used to insert a miniature air vehicle behind a rendezvous vehicle and then track that vehicle to enable a visual rendezvous. For this research we assume the rendezvous vehicle is following a relatively stable and roughly elliptical orbit. Path planners and controllers have been developed that can be used to effectively intercept the rendezvous vehicle by inserting the MAV onto the orbit of interest. A method for planning and following time-optimal Dubins …

Go to article

Automated Flow Path Design Optimization Using Mesh Morphing, William Dennis Gough Oct 2011

Automated Flow Path Design Optimization Using Mesh Morphing, William Dennis Gough

Theses and Dissertations

The use of CAD models and CFD analysis has become an essential part of fluid flow design. To reduce the time spent determining a design, optimization frameworks have been implemented to automate the process. Mesh morphing has been implemented within these frameworks to further reduce the time needed. While optimization methods have been developed to optimize a fluid flow path, the optimum design needs to be recreated in a CAD model. A method has been developed which eliminates the need to recreate the optimal results in CAD. This is accomplished by using mesh morphing, CAD and CFD together in an …

Go to article

Supported Monoethanolamine For Co2 Separation, Morris D. Argyle, Zhuoyan Sun, Maohong Fan Oct 2011

Supported Monoethanolamine For Co2 Separation, Morris D. Argyle, Zhuoyan Sun, Maohong Fan

Faculty Publications

An alternative method for using monoethanolamine (MEA) in CO2 separation is developed from the viewpoints of the MEA-CO2 reaction environment and the process of spent sorbent regeneration. The method could be used to considerably reduce energy consumption compared to conventional aqueous MEA processes. MEA-TiO2 (MT) CO2 sorbent is synthesized using pure MEA and a support material, TiO2. The performance of the MT sorbent on CO2 separation was investigated in tubular reactors under various experimental conditions. The effects of several major factors on CO2 sorption by the MT sorbent were investigated. The sorption capacity of the MT sorbent increased with MEA …

Go to article

Fpga Bootstrapping Using Partial Reconfiguration, Patrick Sutton Ostler Sep 2011

Fpga Bootstrapping Using Partial Reconfiguration, Patrick Sutton Ostler

Theses and Dissertations

Partial reconfiguration (PR) is the process of configuring a subset of resources on a Field Programmable Gate Array (FPGA) while the remainder of the device continues to operate. PR extends the usability of FPGAs and makes it possible to perform design bootstrapping. Just like bootstrapping in PCs, bootstrapping in FPGAs consists of using a small application to initialize basic services and load a larger, more complex application to the device. Bootstrapping allows for unique design applications that can be used to maintain communication services, increase design security, reduce initial configuration time, and reduce nonvolatile configuration memory storage. This thesis presents …

Go to article

Effects Of Pressure On The Properties Of Coal Char Under Gasification Conditions At High Initial Heating Rates, Randy C. Shurtz Sep 2011

Effects Of Pressure On The Properties Of Coal Char Under Gasification Conditions At High Initial Heating Rates, Randy C. Shurtz

Theses and Dissertations

The effects of elevated pressure and high heating rates on coal pyrolysis and gasification were investigated. A high-pressure flat-flame burner (HPFFB) was designed and built to conduct these studies. The HPFFB was designed to provide an environment with laminar, dispersed entrained flow, with particle heating rates of ~10^5 K/s, pressures of up to 15 atm, and gas temperatures of up to 2000 K. Residence times were varied from 30 to 700 ms in this study. Pyrolysis experiments were conducted at particle heating rates of ~10^5 K/s and maximum gas temperatures of ~1700 K at pressures of 1 to 15 atm. …

Go to article

Toward The Design Of A Statically Balanced Fully Compliant Joint For Use In Haptic Interfaces, Levi Clifford Leishman Sep 2011

Toward The Design Of A Statically Balanced Fully Compliant Joint For Use In Haptic Interfaces, Levi Clifford Leishman

Theses and Dissertations

Haptic interfaces are robotic force-feedback devices that give the user a sense of touch as they interact with virtual or remote environments. These interfaces act as input devices, mapping the 3-dimensional (3D) motions of the user's hand into 3D motions in a slave system or simulated virtual world. A major challenge in haptic interfaces is ensuring that the user's experience is a realistic depiction of the simulated environment. This requires the interface's design to be such that it does not hinder the user's ability to feel the forces present in the environment. This "transparency" is achieved by minimizing the device's …

Go to article

Phospholipid Transport In Silicon Hydrogel Contact Lenses, Yibei Zhao Sep 2011

Phospholipid Transport In Silicon Hydrogel Contact Lenses, Yibei Zhao

Theses and Dissertations

Dry eye syndrome has been associated with the lack of phospholipids in the tear film, leading to disruption of the tear film and subsequent irritation. Characterization of the transport and release of phospholipids from a silicone hydrogel contact lens is required to assess the possible use of these lenses for phospholipid delivery to increase patient comfort. This thesis examines the use of silicone hydrogel contact lenses as phospholipid delivery devices. Contact lenses of silicone hydrogel composition were loaded with varying amounts of radiolabeled 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) from a solution of n-propanol. These lenses were eluted at 35°C into artificial …

Go to article

First Prev Next Last