Engineering Commons^™

Molecular Modeling Of Antibody-Antigen Binding Near Solid Surfaces, Derek Bush, Thomas Knotts

Biomedical Engineering Western Regional Conference

Antibody microarrays are biosensors that have the potential to revolutionize molecular detection in medicine, scientific research, and national defense. However, current microarrays are not widely used due to problems including poor reproducibility and signal quality, unbalanced antibody performance, and cross-reactivity. Prior work in the area focused mainly on the stability of the antibody alone and not its affinity for its antigen. This presentation shows results of using molecular simulation to determine how different types of surfaces affect antigen binding to surface-tethered antibodies. The results offer an unprecedented, molecular-level view into these protein-protein-surface interactions and how to drive binding to occur.

Analysis Of Rigid Extended Object Co-Manipulation By Human Dyads: Lateral Movement Characterization, Erich Mielke, Eric Townsend, Marc D. Killpack

Faculty Publications

During co-manipulation involving humans and robots, it is necessary to base robot controllers on human behaviors to achieve comfortable and coordinated movement between the human-robot dyad. In this paper, we describe an experiment between human-human dyads and we record the force and motion data as the leader-follower dyads moved in translation and rotation. The force/motion data was then analyzed for patterns found during lateral translation only. For extended objects, lateral translation and in-place rotation are ambiguous, but this paper determines a way to characterize lateral translation triggers for future use in human-robot interaction. The study has 4 main results. First, …

Electroanalytical Measurements Of Binary-Analyte Mixtures In Molten Licl-Kcl Eutectic: Uranium(Iii)- And Magnesium(Ii)-Chloride, Devin Rappleye, Matthew L. Newton, Chao Zhang, Michael F. Simpson

Faculty Publications

The electrochemical behavior of MgCl₂ in molten LiCl-KCl eutectic was investigated to evaluate its suitability as a surrogate for PuCl₃ in studies related to the eletrorefining of used nuclear fuel. The reduction of Mg²⁺ was found to be electrochemically reversible up to 300 mV s−1 at 773 K. The diffusion coefficient for Mg²⁺ was calculated to be 1.74 and 2.17 × 10−5 cm2 s−1 with and without U³⁺ present, respectively, at 773 K using cyclic voltammetry (CV). Upon comparison to literature data, the diffusion coefficient of Mg²⁺ differs by only 8.8% (with U …

Integrated Stem Through Tumblewing Gliders, Scott R. Bartholomew

Faculty Publications

Teachers have the opportunity to use technology and engineering design problems to engage students in integrated STEM education. “Tumblewing” gliders are easy-to-make paper gliders that can challenge, excite, and engage students. As students emphasize the practices of science and engineering while completing a tumblewing design challenge, they will engage in both scientific inquiry and the engineering design process.

A Well Clear Recommendation For Small Uas In High-Density, Ads-B-Enabled Airspace, Timothy Mclain, Matthew O. Duffield

Faculty Publications

With the growing popularity of small unmanned aircraft systems (UAS), there is a significant need to enable small UAS to detect and avoid collisions with both manned and unmanned aircraft. The capabilities of ADS-B make it an attractive sensor for detect and avoid (DAA), but it is susceptible to frequency congestion. This paper quantitatively analyzes the frequency limitations of 978 MHz ADS-B. It then uses these limitations to make a recommendation for well clear in ADS-B-equipped airspace that has a high density of small UAS operations.

Hybrid Concentrated Solar Thermal Power Systems: A Review, Kody M. Powell, Khalid Rashid, Kevin Ellingwood, Jake Tuttle, Brian D. Iverson

Faculty Publications

Concentrated solar power (CSP), or solar thermal power, is an ideal technology to hybridize with other energy technologies for power generation. CSP shares technology with conventional power generation and can be readily integrated with other energy types into a synergistic system, which has many potential benefits including increased dispatchability and reliability, improved efficiency, reduced capital costs through equipment sharing, and the opportunity for flexible operation by alternating between energy sources. Another advantage of CSP technology is the ability to readily store via thermal energy storage (TES), making the intermittent solar resource dispatchable. A review of CSP hybridization strategies with coal, …

Laboratory X - Autonomous Vehicle Application, Nate Lant, Matthew Strong

Engineering Applications of GIS - Laboratory Exercises

Autonomous vehicles are currently the newest and hottest technology and show tremendous potential in making current transportation much more efficient. GIS is a key element in providing different mapping solutions and satellite assistance to support the cars in addition to their LIDAR and camera systems. Over the last few decades, different technologies have been integrated into cars to make them more user friendly--more autonomous. Recently, cars have been given a standardized range to categorize them into different levels of autonomy. The levels range from 0 to 5. Level 0 has no capacity of any autonomous technology; level 1 has cruise …

Laboratory Exercise – Calculating Runoff Over Land Parcels, Wade Bozeman, Steven Evans, Ryan Selee

Engineering Applications of GIS - Laboratory Exercises

When developing land, most municipalities will require that all runoff from the site be retained on site or flow into a storm water conveyance system. In the near future, new regulation will require that all runoff be retained on site. For this reason, it is important to know how much runoff can be expected to flow over a potential development site. In this lab, you will use ArcMap ModelBuilder to predict the amount of flow which can be expected over a land parcel in a storm event.

Laboratory Exercise – Frontrunner Extension, Meeya Apelu, Jordan Arrowchris, Joseph Browning

Engineering Applications of GIS - Laboratory Exercises

The Utah Transit Authority’s (UTA) FrontRunner is a commuter rail line that runs 89 miles through Weber, Davis, Salt Lake, and Utah counties. There are 16 different stops along this line which are: Pleasant View, Ogden, Roy, Clearfield, Layton, Farmington, Woods Cross, North Temple, Salt Lake Central, Murray Central, South Jordan, Draper, Lehi, American Fork, Orem and Provo (UTA 2017). Using the FrontRunner is easy and is very convenient. The popularity of this transit system is increasing and UTA has announced their future plans to continue the rail line. UTA is exploring ways to go forward with this plan and …

Final Group Project - Optimal Route Finding, Jason Biesinger, Levi Burr, Tyson Terry

Engineering Applications of GIS - Laboratory Exercises

Emergency response teams are always preparing rescue plans and protocols so they may respond quickly to various incidents. Fire trucks and ambulances need to arrive at the scene of the incident rapidly to mitigate injury, and avoid more damage to property in the case of a fire (Kolesar et al. 1973). Holidays are times of high incidence, and officials always plan for potential risks that surround large events. The network analysis toolbox can be used to find and map out the quickest route from a variety of locations. The network analysis toolset in ArcMap makes it possible for us to …

Laboratory Exercise - Ideal Stargazing Locations Background, Michael Adamson, Brandon Walker, Nicholas Smith

Engineering Applications of GIS - Laboratory Exercises

Astrophotography is a specialized type of photography for recording photos of astronomical objects, celestial events, and large areas of the night sky. Astronomical photography employs long exposures so film or digital imaging devices can accumulate light photons over long periods of time. Urban areas produce light pollution so equipment and observatories doing astronomical imaging are often located in remote areas to allow long exposures without the film or detectors being swamped with stray light. Astrophotography is a popular hobby among photographers and amateur astronomers. Images of the night sky can be obtained with some of the most basic film and …

Laboratory Exercise: Calculating Hobble Creek 100 Year Flow Using Arcmap, Micklane Farmer, Saul Ramirez, Riley Vane

Engineering Applications of GIS - Laboratory Exercises

GIS is used extensively in watershed analysis. In previous labs, students have determined a watershed from DEM data. Calculating flow can be very useful in many engineering aspects. With the correct data, GIS can be used to develop a hydrologic model to calculate the flow from a watershed. The purpose of this lab is to develop a model to calculate the flow for the Hobble Creek 100 year event.

Final Laboratory Exercise - Amazon Hq2 Site Selection, Jared Lillywhite, Travis Mcstraw, Marco Rosas Rodriguez

Engineering Applications of GIS - Laboratory Exercises

GIS is often used by major corporations around the world to help manage processes such as shipping, inventory, sales, and expansion. GIS is specifically used in expansion to help determine suitable site locations for new stores, Headquarters, warehouses and other assets to a given corporation. This exercise is based on a real case study. On September 12th, 2017 Amazon announced that it would be opening up a second headquarters that would be equal in operation and size to its Seattle Headquarters. The company is currently taking proposals from different cities, however they are trying to determine which U.S. cities would …

Laboratory Exercise - Nfl Team Placement, Alex Barrow, Tavin Griffeth, Isaac Gomez

Engineering Applications of GIS - Laboratory Exercises

GIS is used by corporations and groups internationally to manage aspects of their business such as shipping, inventory, sales, marketing, facilities, and expansion plans. When dealing with expansion in particular, GIS is used to determine the most appropriate placement of a new store or location.

This laboratory exercise assumes that the National Football League is interested in creating a new team. This new team will be placed in the continental US. For the analysis that you will do, a number of data layers will be required, weather found at the references online sources or created manually. Once the data layers …

Laboratory Exercise - Calculating The Volume Of Material Displaced By Mount St. Helens Eruption Of 1980, Donald Anderson, Alex Fisher, Ken Lippold

Engineering Applications of GIS - Laboratory Exercises

There are several active volcanoes in the state of Washington. On May 18, 1980, one of these volcanoes, Mount St. Helens, erupted. On March 1, 1980, the University of Washington set up a seismograph in the area to monitor the volcano’s activity. On March 20, a minor earthquake was recorded under Mount St. Helens and the entire area was put on alert. Thanks to this warning, the locals were able to evacuate before the mountain erupted. Before fully erupting, some steam and ash was seen billowing out of the top, and on May 18, the volcano was ready to blow. …

Laboratory Exercise - Temple-View Least- Cost Mountain Bike Trail, Brad Wells, Jacob Wilcock

Engineering Applications of GIS - Laboratory Exercises

The International Mountain Bicycling Association (IMBA) has created several guidelines that are used when locating and building new mountain bike trails. A GIS is can be used to generate possible locations for mountain bike trails while following guidelines given by the IMBA. These guidelines include maximum allowable slopes, avoiding fall lines, avoiding flat areas, and seeking areas that include control points such as viewpoints, water, or other attractions. One way to determine the most appropriate placement of a mountain bike trail is to create and run a model in ArcMap that has the necessary input parameters defined within the model. …

Laboratory Exercise – Possible Zara Locations In Utah, Garlick Alyssa, Whitney Robison, Olivia Sorenson

Engineering Applications of GIS - Laboratory Exercises

GIS ModelBuilder can be used well for site selection. For this exercise, we will build a model that will automate the process of creating a map for the best locations in Utah to open a new Zara store. The principles presented here can easily be extrapolated to another state, country, or dataset to automate the process of site selection for retail stores.

Laboratory Exercise – Saratoga Springs Temple Site Locator, Jordi Berrett, Josh Gibbons, Tyler Mickelson

Engineering Applications of GIS - Laboratory Exercises

On April 2, 2017, President Thomas S. Monson of The Church of Jesus Christ of Latter-Day Saints (LDS) announced that the LDS Church would build a temple in Saratoga Springs, Utah. The temple will be the eighteenth LDS temple built in Utah and the fifth in Utah County. It is anticipated that the temple will serve church members in Saratoga Springs, Eagle Mountain, Lehi, and other surrounding areas. The LDS Church carefully chooses optimal sites for their temples. LDS temples tend to be view-able from the surrounding area, usual. Temples are also usually near major highways and in areas that …

Zombie Shelter Location, Shanna Carroll, Tyler Lindsay, Hannah Rasmussen

Engineering Applications of GIS - Laboratory Exercises

One common use of GIS is determining ideal locations for projects. This is because GIS makes it very easy to combine and analyze spatial data in a customized way. In this exercise, assume that there has been a recent zombie outbreak in Utah, USA. To determine the ideal hideout location, data that indicates a safe location must be acquired and combined with geography that is conducive to wilderness survival. Once the data is gathered, spatial analysis using GIS overlay tools must be conducted to determine the ideal location for an anti-zombie hideaway hut. In this exercise, multiple tools will be …

Enhancing Ductility Of Wwr Slabs, Mohamed Shwani, Taylor J. Sorensen, Ethan Pickett, Parker Syndergaard, Marc Maguire

Faculty Publications

A series of research studies have recently identified an issue called strain localization in welded wire reinforced (WWR) members. This phenomenon reportedly concentrates strains at welded cross wire locations and severely limit ductility. Those that identified the phenomenon used it to imply that WWR is unsafe because it does not warn of failure. This research program is investigating details to mitigate the strain localization effect and demonstrate the WWR can be used safely. Sixteen beams have been constructed using WWR and rebar with various cross wire spacing, using a realistic design. The strain localization phenomenon was not demonstrated, but WWR …

Improving Sensitivity Of Electrochemical Sensors With Convective Transport In Free-Standing, Carbon Nanotube Structures, Benjamin J. Brownlee, Kevin M. Marr, Jonathan C. Claussen, Brian D. Iverson

Faculty Publications

High-aspect-ratio, porous membrane of vertically-aligned carbon nanotubes (CNTs) were developed through a templated microfabrication approach for electrochemical sensing. Nanostructured platinum (Pt) catalyst was deposited onto the CNTs with a facile, electroless deposition method, resulting in a Pt-nanowire-coated, CNT sensor (PN-CNT). Convection mass transfer enhancement was shown to improve PN-CNT sensor performance in the non-enzymatic, amperometric sensing of hydrogen peroxide (H₂O₂). In particular, convective enhancement was achieved through the use of high surface area to fluid volume structures and concentration boundary layer confinement in a channel. Stir speed and sensor orientation especially influenced the measured current in …

Gradient-Based Optimization Of Wind Farms With Different Turbine Heights, Andrew P.J. Stanley, Jared Thomas, Andrew Ning, Jennifer Annoni, Katherine Dykes, Paul Fleming

Faculty Publications

Turbine wakes reduce power production in a wind farm. Current wind farms are gen- erally built with turbines that are all the same height, but if wind farms included turbines with different tower heights, the cost of energy (COE) may be reduced. We used gradient-based optimization to demonstrate a method to optimize wind farms with varied hub heights. Our study includes a modified version of the FLORIS wake model that accommodates three-dimensional wakes integrated with a tower structural model. Our purpose was to design a process to minimize the COE of a wind farm through layout optimization and varying turbine …

Optimal Combined Long-Term Facility Design And Short-Term Operational Strategy For Chp Capacity Investments, Jose Mojica, Damon Petersen, Brigham Hansen, Kody Powell, John Hedengren

Faculty Publications

This work presents a detailed case study for the optimization of the expansion of a district energy system evaluating the investment decision timing, type of capacity expansion, and fine-scale operational modes. The study develops an optimization framework to find the investment schedule over 30 years with options of investing in traditional heating sources (boilers) or a next-generation combined heat and power (CHP) plant that provides heat and electricity. In district energy systems, the selected capacity and type of system is dependent on demand-side requirements, energy prices, and environmental costs. This work formulates capacity planning over a time horizon as a …

Modeling Effects Of Annealing On Coal Char Reactivity To O2 And Co2, Based On Preparation Conditions, Troy Michael Holland, Sham Bhat, Peter Marcy, James Gattiker, Joel D. Kress, Thomas H. Fletcher

Faculty Publications

Oxy-fired coal combustion is a promising potential carbon capture technology. Predictive computational fluid dynamics (CFD) simulations are valuable tools in evaluating and deploying oxyfuel and other carbon capture technologies, either as retrofit technologies or for new construction. However, accurate predictive combustor simulations require physically realistic submodels with low computational requirements. A recent sensitivity analysis of a detailed char conversion model (Char Conversion Kinetics (CCK)) found thermal annealing to be an extremely sensitive submodel. In the present work, further analysis of the previous annealing model revealed significant disagreement with numerous datasets from experiments performed after that annealing model was developed. The …

Comprehensive Model Of Single Particle Pulverized Coal Combustion Extended To Oxy-Coal Conditions, Troy Michael Holland, Thomas H. Fletcher

Faculty Publications

Oxy-fired coal combustion is a promising potential carbon capture technology. Predictive CFD simulations are valuable tools in evaluating and deploying oxy-fuel and other carbon capture technologies either as retrofit technologies or for new construction. However, accurate predictive simulations require physically realistic submodels with low computational requirements. In particular, comprehensive char oxidation and gasification models have been developed that describe multiple reaction and diffusion processes. This work extends a comprehensive char conversion code (CCK), which treats surface oxidation and gasification reactions as well as processes such as film diffusion, pore diffusion, ash encapsulation, and annealing. In this work several submodels in …

Semi-Empirical Model For Fire Spread In Shrubs With Spatially-Defined Fuel Elements And Flames, Dallan Prince, Chen Shen, Thomas H. Fletcher

Faculty Publications

A semi-empirical model was developed which forms shrub geometries from distinct fuel elements (e.g. leaves) and describes flame spread from element to element. Ignition, flame growth and flame decay patterns were based on combustion data of single leaves. Extension of the model to various heating conditions was achieved by scaling the flame growth parameters using physics-based heat transfer models. The resulting model offers a novel approach to examine fire spread and to explicitly describe both distinct fuel elements and fire behavior. This approach balances computational speed and modeling detail while providing a unique perspective into fire spread phenomena. Comparisons of …

Developing A General Methodology For Evaluating Composite Action In Insulated Wall Panels, Taylor Sorensen

Faculty Publications

Precast concrete sandwich wall panels (PCSWPs) have been in use for over 60 years. They provide a very efficient building envelope for many buildings. Characteristic PCSWPs comprise an outer and inner layer (or wythe) of concrete separated by an insulating material. To use all of the material as efficiently as possible, the layers are attached by connectors which penetrate through the insulating layer and are embedded in either concrete wythe. These connectors make it possible for both layers of the wall to work together when resisting loads. The connectors are made out of plastic, or FRP, to prevent heat transfer …

Extending The Upper Temperature Range Of Microchip Gas Chromatography Using A Heater/Clamp Assembly, Abhijit Ghosh, Jacob E. Johnson, Johnathan G. Nuss, Brittany A. Stark, Aaron R. Hawkins, Luke T. Tolley, Brian D. Iverson, H. Dennis Tolley, Milton L. Lee

Faculty Publications

Miniaturization of gas chromatography (GC) instrumentation is of interest because it addresses current and future issues relating to compactness, portability and field application. While incremental advancements continue to be reported in microchip GC, the current performance is far from acceptable. This lower performance compared to conventional GC is due to factors such as pooling of the stationary phase in corners of non-cylindrical channels, adsorption of sensitive compounds on incompletely deactivated surfaces, shorter column lengths and less than optimum interfacing to injector and detector. In this work, a microchip GC system was developed that solves the latter challenge, i.e. microchip interfacing …

Controlled Manipulation Of Floating Objects On Deformed Fluid Interfaces And Conditions For Stable Equilibria, Jose M. Carballo, Qi Ni, Jose Vasquez, Nathan B. Crane

Faculty Publications

At the millimeter scale, interactions between floating and semi-immersed objects are significant. The local curvature of the interface is modified by the weight/buoyancy forces of floating objects, and by the surface properties of semi-immersed objects. The curvature changes generate attractive (or repulsive) interactions between floating parts, and semi-immersed objects. This work demonstrates how electrowetting can manipulate these interactions in order to position, align, assemble and transport parts attached to the fluid interface. This demonstrates one way in which fluid interfaces can provide an alternative to standard pick and place technology for part positioning/assembly. Typically, the part/rod forces are purely attractive …

Investigating Composite Action At Ultimate For Commercial Sandwich Panel Composite Connectors, Salam Al-Rubaye, Taylor J. Sorensen, Marc Maguire

Faculty Publications

To achieve full or partial-composite action in prestressed concrete sandwich panel walls, the engineer must obtain a percent composite action from a connector manufacturer, making some engineers uncomfortable. Engineers are dependent upon the recommendations given by the connector manufacturers to establish their designs. This project tested six full-scale sandwich panel walls to evaluate the percent composite action of various connectors and compare the results to those provided by the composite connector manufacturers. This study concluded that the reported degrees of composite action from each manufacturer are considered conservative in all instances for the connectors tested in this paper. Additionally, the …