Engineering Commons^™

Portable Dac And Headphone Amplifier For High Impedance Headphones, Kevin V. Thai

Electrical Engineering

The following paper contains an in-depth report on the design process of a portable DAC and Amplifier for high impedance headphones. The project brings portability into an audiophile’s world. This portable DAC and Class D amplifier takes USB data from a phone, converts it to analog, and amplifies the signal for high impedance headphones. First, the document contains motivations for the project: such as the necessity for such equipment, and who would use this product. Next, discussions of marketing considerations and customer needs bring together specifications. After, the report examines the project plan, overall functionality blocks, and estimated costs. Finally, …

Dual Input Microinverter For Tandem Cells, Forrest M. Lipske, Daniel A. Dich-Dang

Electrical Engineering

For every solar panel, there is an inverter which transforms the harvested DC electricity into AC electricity so that it can connect to the grid and power household appliances. In this project, we examined a tandem solar cell being designed by Iris Photovoltaics which has two layers with two distinct outputs, and we explored several solutions to create a microinverter which can handle dual inputs from the tandem PV and combine them into a single AC output. To examine the viability of such a microinverter, we designed and simulated the DC-DC combination portion of the specialized dual input microinverter, resulting …

Wax Bee Gone: A Safe, Effective Solution To Ear Wax Removal, Robert G. Shenon, Shanvir S. Dhinsa

Electrical Engineering

This project sought to combine conventional methods such as scraping and water pressure to removal ear wax, but with electronic automation to removal the potential for human error as much as possible. Through the use of a 9V battery, and Arduino microcontroller, DC motors, and other circuitry, this project has developed a prototype for a device that can properly remove ear wax without any discomfort or risk to the user. Much of this project involved learning how to properly manipulate and provide the necessary power requirements DC motors from an Arduino and a 9V battery. Additionally, creating a 3D printed …

Auxiliary Power System, Karianne Laplante, Nidia Vara, Eve Wassenaar, Carter Whittington

Electrical Engineering

The main objective for this project is to design and build a prototype for an all-electric SUV for the start-up company, Sharpell Technologies. This vehicle will comprise of the following configurations: auxiliary power system (APS), battery management system, battery pack wiring, CAN bus system, DC-DC charging converter, DC/DC auxiliary converter, instrument cluster, and motor controller/inverter. Each car configuration is a project assigned to a 2-4 student team; in total, eight EE senior projects and one ME project is produced. New lightweight batteries are also in the process of being developed to provide a viable electric source for the car. A …

Light Sensing Automated Blinds, Andrew B. Hodges, Ryan C. Flick

Electrical Engineering

This project is solving the problem of wasted energy within buildings and homes, because currently the lights turned on inside building do not utilize natural, ambient light from the sun. Rather than having unnecessary light from a light source, the automated light sensing smart blinds can sense the amount of light outside the window and in the room, and then adjust the angle of the blinds to save energy by utilizing the available outdoor light. This way, the light source will not be running at maximum power output while there is excess light coming through the window. This project aims …

Student Experimental Farm Smart Pathway Lighting System, Emily A. Whitaker, Vineal S. Singh, Edith Rodriguez

Electrical Engineering

This project works together with the Student Experimental Farm (SEF) and the DC House in order to install a smart lighting pathway system. This system will run off of DC power supplied by the solar panels connected to the DC House. This project tested and explored the group’s abilities to design and implement a full system run off of 48V DC. By installing this system it will greatly improve the ease for students to work at the SEF beyond daylight hours. The system will allow continuous dull lighting and will switch to full brightness once a person is detected. This …

Data Fusion With 9 Degrees Of Freedom Inertial Measurement Unit To Determine Object’S Orientation, Long Dinh Tran

Electrical Engineering

Data fusion is a technique to integrate different types of data to a single unit to provide a more reliable representation of tracking measurement. Today, data fusion can be found in many applications such as tracking and surveillance system as well as on mobile applications. In this project, 9 Degrees of Freedom (DOF) Inertial Measurement Unit (IMU) composed of 3-axis Magnetometer, 3-axis Accelerometer, and 3-axis Gyroscope are processed to yield the object’s rotations in 3 dimensions. While the magnetometer (compass) is used to determine the heading angle, accelerometer is used to determine tilt axis, gyroscope can be process to calculate …

Ecg Classification Using Adaptive Neuro-Fuzzy Inference System, Jason N. Rivera, Kelsey C. Rodriguez

Electrical Engineering

ECG classification using Adaptive Neuro-Fuzzy Inference System (ANFIS), sponsored by Professor Yu, involves the diagnosis of six cardiovascular conditions by analyzing one single neural network. Today’s ECG signal instrumentation does not have the ability to characterize cardiovascular diseases without a doctor’s complete evaluation and diagnosis. Our project gives a promising solution to the inability in the current market’s ECG signal instrumentation to correctly evaluate and diagnose cardiovascular diseases. ECG signal reportings is a non-invasive process that will lead to many more applications of advanced signal processing and data analysis/diagnosis of cardiovascular diseases. The inputs to the ANFIS are annotations of …

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Solar Powered Electric Vehicle Charger, Jessica A. Bombardier Shaw, Andrew F. Moradpour

Electrical Engineering

This project will look into how to create an efficiently-operated solar powered electric vehicle charger. The solar panel will harvest energy from the sun that will be stored a battery pack to be readily available to charge an electric vehicle. These stations could be commercialized to be located along a highway, or personalized for a in-house installation.

Make Scents: Senior Project Report, Bruce Edward Mitchener Iii, Dennis Tsuker

Electrical Engineering

The purpose of this project was to create a smart air freshener. A complete user-friendly system that is programmable and simple to use for customers of all ages. Many constraints were met in order to achieve the final product and the necessary requirements. This Senior Project helps maintain a clean scented room of any size with its programmable functions to set spray times per the user’s request. Final system incorporates a user operated remote controller that catches the signal using an infrared sensor. The ease and simplicity of this air freshener makes it stand out in the competing market of …

Seestar Iii Sensor Module, Matthew M. Ducasse

Electrical Engineering

SeeStar is an autonomous, underwater camera system for observing aquatic environments. The Monterey Bay Aquarium Research Institute (MBARI) developed SeeStar to provide a low cost solution for marine researchers wishing to observe underwater ecosystems over long durations. The system consists of completely open-source designs featuring only common, commercially available components. This means users may purchase the components and build the system themselves. While MBARI originally intended for the system to simply capture photo and video data, many customers have requested additional sensors to gather contextual data to complement the captured images. The latest generation, SeeStar III, features a sensor module, …

Wireless Charging For Bluetooth Earphones, Daniel Carlson

Electrical Engineering

This project involves designing and building an inductive charging system for Bluetooth earphones. This system provides a charging dock for a pair of retrofitted Bluetooth earphones and focuses on ease-of-use and convenience for the user. The motivations for this project include providing charging compatibility to changing audio technology and trends. Smart phones and other audio products are increasingly leaning towards wireless (Bluetooth) audio, and wireless headphones/headsets are naturally becoming more prevalent to match this trend. A small, easy to use, and efficient charging dock for these earphones seems like a necessary accessory for this technology to seem attractive to consumers. …

Contactless Charging Adapter, Kevin Nguyen, Emmett Stetz, Joseph Pacheco

Electrical Engineering

Currently, most cell phones utilize wired adapters to charge, which cause a minor hassle when one frequently needs to unplug and replug their device whenever they pick it up to use while it is charging. The charging adapter is a pad that phones can be placed on to wirelessly charge the device. The charging adapter consists of two components: the wireless charging platform to supply and transmit the power, and the wireless charging receiver for phones that do not already have an internal receiver included, specifically targeting newer generation iPhones that utilize a lightning port (i.e. iPhone 5, 6, 6s, …

Off Grid Solar Array, Courtney Elliott

Electrical Engineering

No abstract provided.

Lecture Videos To Supplement Electromagnetic Classes At Cal Poly San Luis Obispo, Dean Y. Arakaki

Electrical Engineering

Electromagnetics and Transmission Lines is a fundamental, yet difficult subject in the Electrical Engineering (EE) field. To help improve information retention, a series of lecture videos was created to supplement traditional lectures, to facilitate in-class discussions, and to improve students’ proficiency and interest in electromagnetics.

Engineering electromagnetics classes at California Polytechnic State University, San Luis Obispo cover fundamentals to understand and analyze cell phone communications, radar systems (air traffic control, law enforcement), and biomedical imaging (MRI). However, this subject also requires considerable mathematics preparation in vector calculus, differential equations, linear algebra, and background in both physics and EE.

Lecture videos …

Comparison Of Ac And Dc Led Light Bulb Efficiency For The Dc House Project, Brandon Stafford

Electrical Engineering

This project investigates the efficiency of using LED light bulbs when operated under two different electrical systems: AC and DC systems. The project is in conjunction with the implementation of the DC House system in urban areas. More specifically, this project looks at whether having a hybrid AC and DC system in a typical urban house will increase the efficiency in operating the LED light bulbs, and thus reducing energy consumption and cost. The efficiency of the LED light bulbs are measured by looking at their lumens per watt output. Several light bulbs at four different wattage levels were tested. …