Engineering Commons^™

Field Evaluation Of Non-Contact Flow Measurement Device - Pid, Jack Evans, Stuart Styles

BioResource and Agricultural Engineering

The Irrigation Training and Research Center (ITRC) has analyzed the data from several non-contact volumetric flow meter models under various conditions. This testing was done with support from technical services contracts with the California Department of Water Resources (DWR) and the United States Bureau of Reclamation (USBR).

Field Evaluation Of Non-Contact Flow Measurement Device - Bcid, Jack Evans, Stuart Styles

BioResource and Agricultural Engineering

The Irrigation Training and Research Center (ITRC) is currently testing several non-contact volumetric flow meter models under their technical services contracts with the California Department of Water Resources (DWR) and the United States Bureau of Reclamation (USBR). In April 2020, a Sommer RQ-30A non-contact flow meter was installed at Banta Carbona Irrigation Districts (BCID) Main Canal approximately 180 ft downstream of the discharge from Pumping Plant 1. The meter was mounted at midspan along a footbridge that crosses the throat of an ITRC designed subcritical contraction structure (see Figure 1). An existing SonTek Acoustic Doppler Flow Meter (ADFM) was installed …

Overview And Uncertainty Analysis For An Irrigation Flow Measurement Facility, Kyle Feist, Zachary Markow, Stuart Styles

BioResource and Agricultural Engineering

Accurate flow measurement is critical for modern water resource management. At the irrigation district level, instantaneous flow rates must be well-measured at key bifurcation points to reliably meet downstream demand in open channel systems while also minimizing diversions. Furthermore, good flow measurement at each delivery point is a pre-requisite for successful volumetric water billing. Accuracy and repeatability are important characteristics of good flow measurement. Maximizing these traits requires periodic calibration to a common standard.

This paper presents an overview of calibration efforts and the engineering background behind an active flow measurement facility at the Irrigation Training and Research Center at …

Volumetric Flow Measurement For Irrigation District Turnouts, Charles M. Burt, Daniel J. Howes, Stuart Styles

BioResource and Agricultural Engineering

Technical assistance related to irrigation district turnout flow/volumetric measurement is provided by ITRC on behalf of California Dept. of Water Resources, USBR, and BIA irrigation projects. Throughout that work, it was apparent there was a need to organize well-established information as well as to provide new insights into irrigation flow measurement. The target audiences are irrigation districts and others who want to improve measurement accuracy for irrigation flow rates and volumetric deliveries to meet regulations, improve the efficiency of ditchriders (system operators), and provide equity and transparency to farmers and managers. The focus of this publication is on turnouts (deliveries) …

Case Study: Flow Measurement And Control In Walker River Irrigation District, Stuart Styles, Sierra Layous, Robert Bryan

BioResource and Agricultural Engineering

Walker River Irrigation District (WRID) is located in Nevada around the community of Yerington and contains approximately 95,000 hectares (235,000 acres), 32,000 hectares (80,000 acres) of which are irrigated. The district operates a canal system centered around the three forks of the Walker River. Starting in 2009, the district has worked with the Irrigation Training and Research Center (ITRC) to modernize its system by improving the accuracy of the measured diversions from the Walker River and enhancing the real-time control capabilities of the water managers. A “package” was developed for the headworks of canals diverting water from the river, consisting …

Influence Of Supply-Channel Velocity On Farm Delivery Meter Gate Flow Measurement, Daniel J. Howes, Charles M. Burt, John M. Thorburn

BioResource and Agricultural Engineering

The work presented here is an extension of previous papers that updated the calibration of round (Armco-type) meter gates (three sizes: 0.30, 0.46, and 0.61 m), developed ratings for rectangular gates (two sizes: 0.46 and 0.61 m) on round pipes, and examined errors and uncertainty related to using these devices for water discharge measurement. Previous works examined gate discharge ratings under low supply-channel flow velocity perpendicular to the gate discharge pipeline. Here, additional testing was conducted to test the hypothesis that higher velocities in the supply channel would show decreased meter gate flow compared to the low-velocity ratings, but that …

Improving Flow Measurement Accuracy At Farm Delivery Gates In California, Charles M. Burt, Daniel J. Howes

BioResource and Agricultural Engineering

ITRC, through a CSU ARI grant, constructed a meter gate testing facility and tested five gates of various sizes and designs. The gate testing was conducted by varying the multiple parameters including upstream and downstream head, supply channel velocity, gate opening, and head above the gate. Data was also collected at various locations on the downstream side of the gate. In total, ITRC staff collected over 10,000 points of data during this evaluation. Using the new rating tables for the three gates examined, the relative uncertainty is less than ±5 to ±7% at the 95% confidence level with the new …

Flow Measurement Options For Canal Turnouts, Kyle Feist, Charles M. Burt

BioResource and Agricultural Engineering

Volumetric record-keeping, billing, and allocations at irrigation district delivery points (turnouts) are the norm, rather than the exception for most California irrigation districts. However, many older districts are just beginning these efforts, and other districts are trying to improve existing hardware and procedures. Volumetric accounting with high accuracy and a reasonable price presents unique engineering challenges for irrigation districts because of the variety of existing structures and configurations at irrigation delivery points. Because it is likely that irrigation districts will attempt to utilize existing devices, or slightly modify them, there is a need for standardized installation and/or calibration. This paper …

Implementation Of Magnetic Meters For Irrigation Volumetric Measurement, Stuart Styles, Lynn Groundwater

BioResource and Agricultural Engineering

The irrigation industry is experiencing a growth in the use of magnetic meters for measuring the flow rate and volume in irrigation pipelines. Historically, propeller meters have been the device selected by users. New legislation in California (SB7x7) will require measurement devices at key locations for irrigation water delivery. Some users are very interested in the magnetic meter for making the measurement at the turnout or farm gate. The key feature of the new meter is the ability for the device to work in less than ideal flow conditions. Electromagnetic meters have been tested by the Irrigation Training and Research …

Velocity Contour Weighting Method. Ii: Evaluation In Trapezoidal Channels And Roughness Sensitivity, Daniel Howes, Brett F. Sanders

BioResource and Agricultural Engineering

The Velocity Contour Weighting Method (VCWM) was developed in Part I to accurately estimate the cross-sectional average velocity of a prismatic channel flow using acoustic Doppler velocity meter (ADVM) measurements of centerline velocity. Here, the VCWM is validated by its successful application to 25 different concrete-lined trapezoidal channels used for irrigation water delivery. At each site, the cross-sectional distribution of velocity is measured by an acoustic Doppler velocimeter (ADV), which is moved horizontally and vertically through a sampling grid. Multiple tests at some sites led to a total of 51 sets of cross-sectional measurements. ADVM measurements are simulated by interpolating …

Velocity Contour Weighting Method. I: Algorithm Development And Laboratory Testing, Daniel J. Howes, Brett F. Sanders

BioResource and Agricultural Engineering

An algorithm is developed for real-time estimation of the cross-sectional average velocity of a channel flow by using an upward-looking pulsed wave acoustic Doppler velocity meters (ADVM). The Velocity Contour Weighting Method (VCWM) is applicable to gradually varied flows in prismatic channels and requires little to no calibration. VCWM estimates the average velocity as a weighted average of ADVM bin velocities. Weights are based on the velocity distribution sampled by the ADVM. Collectively, the VCWM is able to adapt to a wide range of channel geometry and roughness features. Expressions for the velocity weights are developed by first applying a …

Subcritical Contraction For Improved Open-Channel Flow Measurement Accuracy With An Upward-Looking Advm, Daniel Howes, Charles M. Burt, Brett F. Sanders

BioResource and Agricultural Engineering

Acoustic Doppler velocity meters (ADVMs) provide an alternative to more traditional flow measurement devices and procedures such as flumes, weirs, and stage rating for irrigation and drainage canals. However, the requirements for correct calibration are extensive and complex. A three-dimensional computational fluid dynamics (CFD) model was used to design a subcritical rapidly varied flow contraction that provides a consistent linear relationship between the upward-looking ADVM sample velocity and the cross-sectional average velocity in order to improve ADVM accuracy without the need for in situ calibration. CFD simulations validated the subcritical contraction in a rectangular and trapezoidal cross section by showing …

Evaluation Of Magnetic Meters For Irrigation Pipeline Measurement, Stuart Styles, Bryan Busch

BioResource and Agricultural Engineering

Magnetic flow meters are used to measure the flow rate of a liquid in a closed pipeline. This type of meter is becoming increasingly popular for measurement with agriculture applications. Electromagnetic meters were tested by the Irrigation Training and Research Center in pipelines located less than the 10 diameters upstream of disturbances with good results. Results show that location guidelines for placing a magnetic meter can be decreased even for turbulent conditions. This paper will discuss how a magnetic flow meter works, advantages and disadvantages of this type of meter, test results, and new guidelines for field applications.

Volumetric Irrigation Water Pricing Considerations, Charles M. Burt

BioResource and Agricultural Engineering

Volumetric water pricing is a popular topic within donor agencies for irrigation project modernization and sustainability. Implementation of an effective pricing program is quite complex and requires consideration of physical modernization, fee structure, enforcement procedures, and the level of water delivery service. Variations of volumetric water pricing and allocation are discussed.

Non-Standard Structure Flow Measurement Evaluation Using The Flow Rate Indexing Procedure – Qip, Stuart Styles

BioResource and Agricultural Engineering

This paper summarizes the results of a performance evaluation using advanced hydroacoustic rating techniques in irrigation canal systems. Standardized field-tested procedures and technical specifications for index velocity ratings have been developed for rating measurement locations using hydroacoustic flow meters. Water managers and users of advanced electronic flow measuring devices can improve the cost effectiveness, accuracy, and quality control of discharge records, even at sites with complex flow conditions, by observing these recommended guidelines.

Non-Standard Structure Flow Measurement Evaluation Using The Flow Rate Indexing Procedure - Qip, Stuart W. Styles

BioResource and Agricultural Engineering

This paper summarizes the results of a performance evaluation using advanced hydroacoustic rating techniques in irrigation canal systems. Standardized field-tested procedures and technical specifications for index velocity ratings have been developed for rating measurement locations using hydroacoustic flow meters. Water managers and users of advanced electronic flow measuring devices can improve the cost effectiveness, accuracy, and quality control of discharge records, even at sites with complex flow conditions, by observing these recommended guidelines.