Engineering Commons^™

Coastal Bridges Under Hurricane Stresses Along The Texas And Louisiana Coast, Adolfo Matamoros, Firat Testik

Data

Corresponding data set for Tran-SET Project No. 17STTSA02. Abstract of the final report is stated below for reference:

"The main objective of this study was to develop a high-resolution model capable of simulating the response of bridge structures to hydrodynamic loads for hurricane design conditions (i.e. surge height, wave height, and frequency) expected in the Texas-Louisiana coast. The model relied on Coupled Eulerian-Lagrangian techniques (CEL) where solids are simulated with Lagrangian meshes, while fluids are simulated using Eulerian meshes, and was calibrated using historical data from wave impact laboratory tests. Two high resolution models were created, the first of a …

Development Of A Self-Powered Structural Health Monitoring System For Transportation Infrastructure, Aydin Karsilaya, Samer Dessouky, Athanassios Papagiannakis

Data

Corresponding data set for Tran-SET Project No. 17PTAM03. Abstract of the final report is stated below for reference:

"Roadways and bridges play an important role in the economic and social health of society by connecting commerce and people. Economic growth and population expansion pose considerable burden on the aging infrastructure (i.e., pavements and bridges). There is a pressing need to develop structural health monitoring (SHM) technologies capable of collecting infrastructure utilization data. Doing so inexpensively with self-powered systems will revolutionize infrastructure monitoring technology, and will improve decision making enabling roadway and bridge preservation. In this study, a self-powered battery-less structural …

A Comprehensive Reliability-Based Framework For Corrosion Damage Monitoring And Repair Design Of Reinforced Concrete Structures, Homero Castaneda, Aydin Karsilaya, Ayman Okeil, Mahmoud Reda Taha

Data

Corresponding data set for Tran-SET Project No. 17STLSU03. Abstract of the final report is stated below for reference:

"In this work, we developed a comprehensive framework for corrosion management of reinforced concrete (RC) structures. This framework includes critical steps of an effective approach to quantify the damage evolution as well as providing the timeframe for effective maintenance/repair strategies for corrosion assessment in RC structures. The framework included several activities including the use of indirect and direct inspection tools, theoretical development for damage prediction, experimental measurements and theoretical development of repair time based on reliability. The uniqueness of the framework is …

Development Of A Standard Test Method For Characterization Of Asphalt Modifiers And Aging-Related Degradation Using An Extensional Rheometer, Nazimuddin Wasiuddin

Data

Corresponding data set for Tran-SET Project No. 17BLSU01. Abstract of the final report is stated below for reference:

"An extensional deformation test method using a Sentmanat Extensional Rheometer (SER) fixture inside a Dynamic Shear Rheometer (DSR) is developed in this study to investigate the degradation of the polymer due to aging and to investigate the effect of modifier type. A relationship between different percentages of modifier and ductility of the modified binder is also investigated. The sample geometrics used in this study are 1 mm  0.72 mm and 3 mm  0.72 mm. A total of one hundred and …

Prediction And Rehabilitation Of Highway Embankment Slope Failures In Changing Climate, Navid Jafari, Anand Puppala

Data

Corresponding data set for Tran-SET Project No. 17GTLSU04. Abstract of the final report is stated below for reference:

"Highway slopes constructed with clayey soil are prone to desiccation cracks due to wetting and drying weather cycle, which allows greater moisture infiltration into the embankment from precipitation. Fissures formed due to extended wetting and drying cycles allow water to seep deeper into the soil than surficial wetting and increase the water content. This increases the moisture content in the soil and results in reduction in shear strength to the fully softened strength. On the other hand, development of desiccation cracks and …

Bridge Deck Overlays Using Ultra-High Performance Concrete, Craig Newtson, Brad Weldon

Data

Corresponding data set for Tran-SET Project No. 17CNMS01. Abstract of the final report is stated below for reference:

"This study investigated the use of a locally produced ultra-high performance concrete (UHPC) as an alternative to typical overlay materials. Several bond strength tests including slant-shear, splitting tension, and direct tension tests were performed to assess the bond strength between UHPC and normal strength concrete (NSC) substrate with varying surface textures. Tests were also conducted to assess the early-age and longer-term shrinkage behavior and coefficient of thermal expansion of the UHPC as well as rapid chloride permeability testing. Good bond between UHPC …

Modeling Sulfate Attack In Modern Concrete For Building Sustainable And Resilient Infrastructure, Zachary Grasley

Data

Corresponding data set for Tran-SET Project No. 17CTAM01. Abstract of the final report is stated below for reference:

"External sulfate attack is a complex phenomenon and is manifested in the form of large expansion, cracking, and spalling depending on the exposure solution and material constituent properties. Several models were developed in the past to demonstrate sulfate attack mechanisms that account for the diffusion of sulfate ions into the porous concrete and the successive deformation triggered by the chemical reaction and precipitation of expansive agents. However, none of these models accounts for the effect of the migration of solvent water from …

Use Of Rice Hull Ash (Rha) As A Sustainable Source Of Construction Material, Zahid Hossain, Ashraf Elsayed

Data

Corresponding data set for Tran-SET Project No. 17CASU02. Abstract of the final report is stated below for reference:

"With the imminent shortage of natural resources, the need to find sustainable development is the highest in recent history. Therefore, this study examines the potential uses of Rice Hull Ash (RHA) as a sustainable cementitious material (SCM) in preparation of concrete. This study also assesses the use of RHA as an alternative of commonly used polymers in preparing high-grade asphalt binders. RHA is a potential sustainable solution because it is currently being treated as an agricultural waste material, yet its high silica …

Bridge Inspecting With Unmanned Aerial Vehicles R&D, Paul Darby, Vijaya Gopu

Data

Corresponding data set for Tran-SET Project No. 17STLSU11. Abstract of the final report is stated below for reference:

"The project achieves through research including literature, on site interviews, and experimentation: 1) a recommendation for a UAV-based system to practically assist in routine bridge inspection work in the State of Louisiana, 2) the identification and description of advantages, disadvantages, and limitations in the use of UAVs for routing bridge inspection work in Louisiana, and 3) provided recommendations for future work. The Yuneec H520 aircraft and its E90 camera are recommended, as is the need for a boat to be included as …

Simplified Approach For Structural Evaluation Of Flexible Pavements At The Network Level, Mena Souliman, Stefan Romanoschi, Samer Dessouky

Data

Corresponding data set for Tran-SET Project No. 17PUTA02. Abstract of the final report is stated below for reference:

"Currently, there are few available simple procedures to identify structurally weak pavement sections utilizing Falling Weight Deflectometer (FWD) data at the network level (e.g., city, state or province). A simple method is required to determine the structural condition of pavement sections that can be directly implemented and automated in current pavement databases. The objective of this research study is to develop a simple analysis method to determine the structural condition of pavement sections utilizing the currently available non-destructive testing (NDT) deflection measurement …

Relationship Between Road Network Characteristics And Traffic Safety, Hatim Sharif, Samer Dessouky

Data

Corresponding data set for Tran-SET Project No. 17ITSTSA01. Abstract of the final report is stated below for reference:

"The Transportation and Capital Improvement of the City of San Antonio, Texas Department of Transportation (TxDOT) and other related agencies often make several efforts based on traffic data to improve safety at intersections, but the number of intersection crashes is still on the high side. There is no one size fits all solution for intersections and the City is often usually confronted with doing best value option analysis on different solutions to choose the least expensive yet more advancements. The goal of …

Development, Training, Education, And Implementation Of Low-Cost Sensing Technologies For Bridge Structural Health Monitoring (Shm), Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Roya Nasimi

Data

Corresponding data set for Tran-SET Project No. 17STUNM02. Abstract of the final report is stated below for reference:

"Transportation infrastructure needs continuous monitoring. However, traditional inspections cost money and are conducted visually. New technologies for bridge monitoring are expensive and complex. This project involved developing cost-effective sensor technologies that can be applied towards the maintenance of railroad bridges by recording reference-free transverse displacement. More specifically, this project developed new applications of new technologies (Arduino, wireless smart sensors, drones, Hololens) and promoted workforce development with an emphasis on outreach of high-school students. This project was carried out in three main phases: …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Data

Corresponding data set for Tran-SET Project No. 17CLSU05. Abstract of the final report is stated below for reference:

"The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated …

Impacts Of Moisture On Asphalt Properties, Zahid Hossain

Data

Corresponding data set for Tran-SET Project No. 17BASU03. Abstract of the final report is stated below for reference:

"Stripping related moisture damage has been recognized as one of the major pavement distresses since the early 1990s. The main objective of this study is to establish an effective test protocol to quantify moisture susceptibility of asphalt pavements. To this end, selective test methods (Texas Boiling test, Tensile Strength Ratio, Retained Stability, and Hamburg Wheel Test), and procedures based on surface chemistries and molecular-level mechanistic properties have been investigated in this study. Firstly, a comprehensive list of literature related to moisture damage …

Integrated Health Monitoring And Reinforcement Of Transportation Structures With Optimized Low-Cost Multifunctional Braided Cables, Ibrahim Karaman, Darren Hartl

Data

Corresponding data set for Tran-SET Project No. 17STTAM04. Abstract of the final report is stated below for reference:

"Corresponding data set for The objective of this research study is to design, fabricate, and characterize multifunctional high strength and self-sensing braided cables and structures using novel Fe-based shape memory alloys (SMAs). The system exploits unique properties of recently developed low-cost super-elastic FeMnAlNi SMAs, which enables excellent super-elastic properties, high strength, and self-sensing in structural health monitoring (SHM) systems. This novel material technology can be coupled with modeling efforts that allow for accurate prediction of both the materials and structural response during …

Investigating Problem Of Distracted Drivers On Louisiana Roadways, Xiaoduan Sun

Data

Corresponding data set for Tran-SET Project No. 17SALSU10. Abstract of the final report is stated below for reference:

"Due to the escalating usage of cellphone and social networking, distracted driving is and will remain as one of the most serious problems faced by Departments of Transportation (DOTs) and law enforcement agencies. Under the aim of in-depth investigation of distracted driving crashes in Louisiana, the specific objectives of this study are: (1) reviewing the crash reports for the quality of distracted driving crash reporting, (2) analyzing distracted driving-related crashes through regression model and data mining algorithm to link the severity of …

A Dynamic Multiple Stage, Multiple Objective Optimization Model With An Application To A Wastewater Treatment System, Prashant Tarun

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Decision-making for complex dynamic systems involves multiple objectives. Various methods balance the tradeoffs of multiple objectives, the most popular being weighted-sum and constraint-based methods. Under convexity assumptions an optimal solution to the constraint-based problem can also be obtained by solving the weighted-sum problems, and all Pareto optimal solutions can be obtained by systematically varying the weights or constraint limits. The challenge is to generate meaningful weights or constraint limits that yield practical solutions. In this dissertation, we utilize the Analytic Hierarchy Process (AHP) and develop a methodology to generate weight vectors successively for a dynamic multiple stage, multiple objective (MSMO) …

Incorporating Drones In My Classroom: Survey Data From High School Teachers 2018, Tyson Sorensen, Kelsey Hall, Olivia Horning, Joshua Dallin, David Francis

Browse all Datasets

Survey data collected from 69 high school and middle school teachers. Survey gauges intentions of integrating drone curriculum concepts into the classroom.

Dataset includes summary data, raw data and survey instrument.

Genetic Engineering In Agriculture Curricula For Grades 9-12, Tyson Sorensen, Olivia Horning, Kelsey Hall, David Francis, Joshua Dallin

Browse all Datasets

This is a curriculum package that was developed for teachers to be able to integrate genetic engineering and biotechnology concepts, skills, and career applications into their classrooms. This package was developed as part of the LEARN workshop entitled "Genetic Engineering: Workshop for Teachers." This curriculum package includes five full units of instructions with lesson plans, presentation resources, and other resources for teachers. This package is intended for students in grades 9-12.

Each unit is complete with the corresponding slides found in the main Genetic Engineering PowerPoint. Teachers have the liberty to cover the material on an as-needed bases based on …

Logistics Best Practices For Regional Food Systems: A Review, Anuj Mittal, Caroline C. Krejci, Teri J. Craven

Industrial, Manufacturing, and Systems Engineering Faculty Publications - Archive

The modern industrial food supply system faces many major environmental and social sustainability challenges. Regional food systems, in which consumers prefer geographically proximate food producers, offer a response to these challenges. However, the costs associated with distributing food from many small-scale producers to consumers have been a major barrier to long-term regional food system success. Logistics best practices from conventional supply chains have the potential to improve the efficiency and effectiveness of regional food supply chains (RFSCs). This paper provides a structured and in-depth review of the existing literature on RFSC logistics, including recommended and implemented best practices. The purpose …

Experimental And Numerical Study Of Evaporation From Wavy Surfaces By Coupling Free Flow And Porous Media Flow, Bo Gao, Hossein Davarzani, Rainer Helmig, Kathleen M. Smits

Civil Engineering Faculty Publications - Archive

The macroscale roughness of the soil surface has significant influences on the mass/energy interactions between the subsurface and the atmosphere during evaporation. However, most previous works only consider evaporation behavior from flat surfaces. Based on experimental and numerical approaches, the goal of this work is to provide a framework for the understanding of the mechanisms of evaporation from irregular soil surfaces at representative elementary volume scale. A coupling free flow-porous media flow model was developed to describe evaporation under nonisothermal conditions. For simplicity, sinusoidal-type wavy surfaces were considered. To validate this modeling approach, an experiment using an open-ended wind tunnel …

Coupled Thermally-Enhanced Bioremediation And Renewable Energy Storage System: Conceptual Framework And Modeling Investigation, Ali Moradi, Kathleen M. Smits, Jonathan O. Sharp

Civil Engineering Faculty Publications - Archive

This paper presents a novel method to couple an environmental bioremediation system with a subsurface renewable energy storage system. This method involves treating unsaturated contaminated soil using in-situ thermally enhanced bioremediation; the thermal system is powered by renewable energy. After remediation goals are achieved, the thermal system can then be used to store renewable energy in the form of heat in the subsurface for later use. This method can be used for enhanced treatment of environmental pollutants for which temperature is considered a limiting factor. For instance, this system can be used at a wide variety of petroleum-related sites that …

Evaluation Of Model Concepts To Describe Water Transport In Shallow Subsurface Soil And Across The Soil–Air Interface, Zhen Li, Jan Vanderborght, Kathleen M. Smits

Civil Engineering Faculty Publications - Archive

Soil water evaporation plays a critical role in mass and energy exchanges across the land– atmosphere interface. Although much is known about this process, there is no agreement on the best modeling approaches to determine soil water evaporation due to the complexity of the numerical modeling scenarios and lack of experimental data available to validate such models. Existing studies show numerical and experimental discrepancies in the evaporation behavior and soil water distribution in soils at various scales, driving us to revisit the key process representation in subsurface soil. Therefore, the goal of this work is to test different mathematical formulations …

Computational Thinking And Literacy, Sharin Rawhiya Jacob, Mark Warschauer

Journal of Computer Science Integration

Today’s students will enter a workforce that is powerfully shaped by computing. To be successful in a changing economy, students must learn to think algorithmically and computationally, to solve problems with varying levels of abstraction. These computational thinking skills have become so integrated into social function as to represent fundamental literacies. However, computer science has not been widely taught in K-12 schools. Efforts to create computer science standards and frameworks have yet to make their way into mandated course requirements. Despite a plethora of research on digital literacies, research on the role of computational thinking in the literature is sparse. …

Characterization Of Grain-Size Distribution, Thermal Conductivity, And Gas Diffusivity In Variably Saturated Binary Sand Mixtures, T.K.K. Chamindu Deepagoda, Kathleen Smits, J.R.R.N. Jayarathne, Benjamin M. Wallen, Timothy J. Clough

Civil Engineering Faculty Publications - Archive

Characterization of differently textured porous materials, as well as different volumetric porous media mixtures, in relation to mass and heat transport is vital for many engineering and research applications. Functional relations describing physical (e.g., grain-size distribution, total porosity), thermal, and gas diffusion properties of porous media and mixtures are necessary to optimize the design of porous systems that involve heat and gas transport processes. However, only a limited number of studies provide characterization of soil physical, thermal, and gas diffusion properties and the functional relationships of these properties under varying soil water contents, especially for soil mixtures, complicating optimization efforts. …

Dna Identification Of Polyculture, Andrew Schuler

Energize New Mexico (NSF EPSCoR Track 1 IV)

DNA sequencing of algae polyculture growing in oilfield produced water. It is dominated by the algae species Parachlorella kessleri and Cyanobacterium aponinum.

Chrome Extension To Explore Modular Homepage, Griffin T. Cloonan, Landon E. Woollard, Nick A. Ponce

Computer Science and Software Engineering

This was an exploratory project, intended to develop skills developing extension based web applications. We spent our time building a modular, customizable homepage extension for google chrome. The bulk of our work was focused towards structure and function, as a result, the project is not highly appealing visually. We worked with foreign concepts in a foreign environment in an attempt to learn new skills on the fly.

Sdnet2018: A Concrete Crack Image Dataset For Machine Learning Applications, Marc Maguire, Sattar Dorafshan, Robert J. Thomas

Browse all Datasets

SDNET2018 is an annotated image dataset for training, validation, and benchmarking of artificial intelligence based crack detection algorithms for concrete. SDNET2018 contains over 56,000 images of cracked and non-cracked concrete bridge decks, walls, and pavements. The dataset includes cracks as narrow as 0.06 mm and as wide as 25 mm. The dataset also includes images with a variety of obstructions, including shadows, surface roughness, scaling, edges, holes, and background debris. SDNET2018 will be useful for the continued development of concrete crack detection algorithms based on deep learning convolutional neural networks, which are a subject of continued research in the field …

Detection And Prediction Of Defects In Composite Materials Using Di-Electric Characterization And Neural Networks, Muthu Ram Prabhu Elenchezhian, Aishwarya Nandini, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

The state of art non-destructive inspection techniques for composite materials detect the presence of defects in the composite material, but they do not identify what type of defect it is, and hence, further visual inspection of the details are needed. This visual classification is a costly and time-consuming process, and it’s difficult to distinguish all of the defects effectively. Broadband Dielectric Spectroscopy (BbDS), has been an established tool for dielectric material characterization in polymer industries for a long time. Dielectric spectra of heterogeneous materials are altered by constituent interfaces, with changes in morphological heterogeneity, electrical and structural interactions between particles, …

Dielectric Property Investigation Of Degraded Pre-Preg And Performance Prediction Of The Final Composite Part, Aishwarya Nandini, Nina Shute, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

In recent years, fiber-reinforced (i.e., Glass, Carbon, Kevlar) epoxy composites are used widely in structural applications ranging from military and civil aircraft production to recreational consumer products. Most of the industries use pre-impregnated varieties of composite (prepregs) to make high-quality composite parts. Despite their various advantages, prepreg materials are unstable at ambient temperature. A realistic estimation of the shelf life of prepreg is therefore essential for maintaining quality while reducing wastage of resources. Prepregs are temperature and moisture sensitive material systems. To achieve prolonged shelf life, manufacturer and seller of the prepreg must store the materials at zero degrees Celsius …