Engineering Commons^™

2020 - The Twenty-Fourth Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Twenty-fourth Annual Symposium of Student Scholars, held on April 16, 2020. Includes abstracts from the presentations and posters.

Space And Defense – Volume Seven – Number One – Winter 2014, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Two – Number One – Winter 2008, Space And Defense Journal

Space and Defense

No abstract provided.

Toward An Agent-Agnostic Transmission Model: Synthesizing Anthropocentric And Technocentric Paradigms In Communication, Jaime Banks, Maartje M. A. De Graaf

Human-Machine Communication

Technological and social evolutions have prompted operational, phenomenological, and ontological shifts in communication processes. These shifts, we argue, trigger the need to regard human and machine roles in communication processes in a more egalitarian fashion. Integrating anthropocentric and technocentric perspectives on communication, we propose an agent-agnostic framework for human-machine communication. This framework rejects exclusive assignment of communicative roles (sender, message, channel, receiver) to traditionally held agents and instead focuses on evaluating agents according to their functions as a means for considering what roles are held in communication processes. As a first step in advancing this agent-agnostic perspective, this theoretical paper …

A New Materials And Design Approach For Roads, Bridges, Pavement, And Concrete, Alan Fuchs, Tathagata Acharya, Luis Cabrales, Jesse Bergkamp, Nyakundi Michieka

Mineta Transportation Institute

Increased understanding of demand for transport energy and how to improve road pavement materials would enable decision makers to make environmental, financial, and other positive changes in future planning and design of roads, bridges, and other important transportation structures. This research comprises three studies focused on pavement materials and a fourth study that examines energy demand within the road transportation sector. These studies are as follows:

1. A techno-economic study of ground tire rubber as an asphalt modifier;

2. A computational fluid dynamics analysis comparing the urban heat island effect of two different pavement materials – asphalt and Portland Cement …

Code Smells: A Synthetic Narrative Review, Peter Kokol Prof, Marko Kokol, Sašo Zagoranski

Library Philosophy and Practice (e-journal)

Code smells are symptoms of poor design and implementation choices, which might hinder comprehension, increase code complexity and fault-proneness and decrease maintainability of software systems. The aim of our study was to perform a triangulation of bibliometric and thematic analysis on code smell literature production. The search was performed on Scopus (Elsevier, Netherlands) database using the search string “code smells” which resulted in 442 publications. The Go-to statement was the first bad code smells identified in software engineering history in 1968. The literature production trend has been positive. The most productive countries were the United States, Italy and Brazil. Eight …

System Approaches To Water, Sanitation, And Hygiene: A Systematic Literature Review, Nicholas Valcourt, Amy Javernick-Will, Jeffrey P. Walters, Karl Linden

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Endemic issues of sustainability in the water, sanitation, and hygiene (WASH) sector have led to the rapid expansion of ‘system approaches’ for assessing the multitude of interconnected factors that affect WASH outcomes. However, the sector lacks a systematic analysis and characterization of the knowledge base for systems approaches, in particular how and where they are being implemented and what outcomes have resulted from their application. To address this need, we conducted a wide-ranging systematic literature review of systems approaches for WASH across peer-reviewed, grey, and organizational literature. Our results show a myriad of methods, scopes, and applications within the sector, …

A Framework Of International Competencies For Systems Engineers, Annlizé L. Marnewick, Holly A.H. Handley

Engineering Management & Systems Engineering Faculty Publications

In the course of their career, many systems engineers are likely to interact with engineers of other nationalities as they collaborate on large, complex projects and system of system problems. These partnerships are necessary to support international goals, such as those for sustainable development. System engineers may even work onsite in other countries where they must adapt to different styles of doing business. This requires a set of global skill sets for cooperating and decision making, as well as basic social skills for interacting with the local community. These global skills can be included in a graduate level system engineering …

Vicarious Methodologies To Assess And Improve The Quality Of The Optical Remote Sensing Images: A Critical Review, Sakib Kabir

Electronic Theses and Dissertations

Over the past decade, number of optical Earth observing satellites performing remote sensing has increased substantially, dramatically increasing the capability to monitor the Earth. The quantity of remote sensing satellite increase is primarily driven by improved technology, miniaturization of components, reduced manufacturing, and launch cost. These satellites often lack on-board calibrators that a large satellite utilizes to ensure high quality (e.g., radiometric, geometric, spatial quality, etc.) scientific measurement. To address this issue, this work presents “best” vicarious image quality assessment and improvement techniques for those kinds of optical satellites which lacks on-board calibration system. In this article, image quality categories …

Food Printing: Evolving Technologies, Challenges, Opportunities, And Best Adoption Strategies, Sharmin Attarin, Mohsen Attaran

Journal of International Technology and Information Management

3D printing is a process of making three-dimensional objects using additive processes where layers are laid down in succession to create a complete object. Companies across the globe are actively piloting and leveraging the inherent benefits of 3D printing technology. Today, 3D printing can revolutionize food innovation and production through better creativity, customizability, and sustainability. This article highlights 3D printing evolving technologies and trends and identifies its applications and implementation challenges. In this paper, we conducted a literature review to explore 3D printing's current technologies and applications in the food industry, including its advantages, its potential implications, and its obstacles …

Internet Of Things For Sustainable Community Development: Introduction And Overview, Abdul Salam

Computer Information Technology Faculty Publications

The two-third of the city-dwelling world population by 2050 poses numerous global challenges in the infrastructure and natural resource management domains (e.g., water and food scarcity, increasing global temperatures, and energy issues). The IoT with integrated sensing and communication capabilities has the strong potential for the robust, sustainable, and informed resource management in the urban and rural communities. In this chapter, the vital concepts of sustainable community development are discussed. The IoT and sustainability interactions are explained with emphasis on Sustainable Development Goals (SDGs) and communication technologies. Moreover, IoT opportunities and challenges are discussed in the context of sustainable community …

Resource Ecologies, Political Economies And The Ethics Of Audio Technologies In The Anthropocene, Eliot Bates

Publications and Research

Understanding how recorded and amplified stage musics contribute towards producing the Anthropocene necessitates attending to complex transnational flows of material, capital and labor, and how they coalesce into technological objects. This is complicated by the wide array of sites, practices and knowledges involved during various stages of the production process, from initial resource extraction, to smelting, component manufacturing, technology assembly, and distribution. To develop a suitable technological ethics, and to understand what happens to environments and to human, animal and plant lifeworlds, requires one to resist abstraction and undertake a global accounting of resource ecologies with recourse to planetary-scale political …

Blockchain Adoption Model For The Global Banking Industry, Zaina Kawasmi, Evans Akwasi Gyasi, Deneise Dadd

Journal of International Technology and Information Management

Blockchain has become the new hype term in the business world for the last decade. Due to the new technology’s characteristics and innovative applications, it is being adopted globally in a wide number of industries including the banking industry, yet no adoption model is provided to guide this process. This research aims to contribute to facilitating the successful adoption and implementation of the blockchain new technology in the banking industry. Building on the assumption that the blockchain’s adoption in banking will be directed by the regulations and best practices guidelines of the global banking regulatory bodies and practitioner, this research …

Assessing The Influence Of Self-Efficacy On The Acceptance Of Mobile Phone Technology Within The Smes, Renatus Michael Mushi

Journal of International Technology and Information Management

Mobile phone technologies have proved to provide a significant transformation in performing various activities within companies, especially in least developed regions. Mobile phones provide opportunities for employees of organisations to work any time and anywhere. SMEs comprise of employees who perform multitasking job roles due to their small in size and low financial capabilities and most cases, some of them work remotely from their main offices.

Self-Efficacy is a belief that the user has enough skills to use technology to perform a task at hand. This is one of the factors influencing of acceptance of technologies at the workplaces such …

An Investigation Into Solid Waste Problem In The Egyptian Construction Industry: A Mini-Review, Ahmed Osama Daoud, Ayman Ahmed Ezzat Othman, Herbert Robinson, Ali Bayyati

Architectural Engineering

Solid waste management (SWM) is one of the most critical global challenges nowadays. It has a severe negative effect on the triple bottom line of sustainability. Construction and demolition waste (CDW) contributes about 50% of the total global annual generated SW. In the particular case of the Middle East and North Africa (MENA) region including Egypt, the SW problem has become a major challenge, and the need to find sustainable solutions is overwhelming. However, the region faces several challenges that hinder the development of an effective and efficient SWM system. This has resulted in the predominance of unsustainable SWM practices …

A Framework To Activate The Health And Safety Regulations In The Egyptian Construction Industry, Mostafa Adel Elsebaei, Ayman Ahmed Ezzat Othman, Omar Elnawawy, Mohammed Badawy

Architectural Engineering

Purpose

The construction industry is considered one of the most dangerous industries especially in developing countries such as Egypt. Although safety in Egypt is regulated by mainly four pivotal legislations, namely, Law No. 12 (2003) and Ministerial Decrees No. 211, 126 and 134, construction accident records in Egypt are high. Accordingly, this paper aims to develop a framework to activate the health and safety regulations in the Egyptian construction industry.

Design/methodology/approach

To achieve this aim, a research methodology consisting of a literature review and a survey questionnaire was developed to accomplish three objectives. First, a literature review was used to …

Achieving Sustainability Through Reducing Construction Waste During The Design Process: A Value Management Perspective, Ayman Ahmed Ezzat Othman, Sherouk Mohamed Abdelrahim

Architectural Engineering

Purpose:

The purpose of this paper is to investigate the role of Value Management towards achieving sustainability through reducing the construction waste during the design process.

Design/methodology/approach

To achieve the abovementioned aim, a research methodology consisting literature review and survey questionnaire is designed to achieve the following objectives: first, building a comprehensive understanding of the research topic through reviewing literature related to the nature of the construction industry, waste in construction, sustainability, the design phase and Value Management; second, presenting and analysing two case studies to validate the role of Value Management towards reducing waste in construction projects; third, conducting …

Taking Off In Africa: Critical Elements Of Aircraft Engine Manufacturer Engagement That Can Affect Airline Safety Performance, Nathan Michael Woods

Antioch University Dissertations & Theses

Original Equipment Manufacturer (OEM) is a term used in many industries to describe a company that produces parts and equipment that may be marketed by another manufacturer. In the aviation industry, the aircraft engine OEM refers to the company the manufactures engines powering the aircraft. The OEM manufactures the engine, defines the required maintenance to operate the engines, and recommends product modifications. Product modifications are recommended to improve product safety, durability, reliability, and cost of ownership and are formally communicated through issuance of service bulletins. Properly performing the required maintenance and adopting service bulletins is an important element of maintaining …

The Role Of Geospatial Information And Effective Partnerships In The Implementation Of The International Agenda For Sustainable Development, Etta Delores Jackson

Antioch University Dissertations & Theses

The former United Nations Secretary-General Ban Ki-Moon (2014), repeated the core promise in the 1986 UN Declaration on the Right to Development, in which the General Assembly called for an approach guaranteeing meaningful participation of everyone in development and the fair distribution of the benefits of that development. To this end, partnerships are central and can lead to the dignity of the citizens involved as they participate in the development of their own communities. This dissertation research conducted in Manyatta A and B in the Port City of Kisumu, Kenya sought to do just that. The purpose of this study …

Exploring The Career Experiences Of Immigrant Nigerian Women Engineers, Ijeoma Lilian Ozoude

Walden Dissertations and Doctoral Studies

The contribution of immigrant Science, Technology, Engineering and Mathematics (STEM) workers in addressing the projected shortage of U.S. STEM workforce cannot be overemphasized. Despite efforts by U.S. policy makers to provide opportunities for a positive STEM experience and diversify the STEM field by increasing the number of underrepresented minorities and women via The Women and Minorities in STEM Booster Act, changes to the U.S. immigration policy towards Nigeria, including bans on immigrant visas and Diversity visas could impact recruitment of immigrant Nigerian workers in STEM. Using Kingdon’s multiple streams framework and Crenshaw’s intersectionality theory, this study explored the career experiences …

Post-Supernatural Cultures: There And Back Again, Wesley J. Wildman, F. Leron Shults, Saikou Y. Diallo, Ross Gore, Justin Lane

VMASC Publications

The abandonment of supernatural religious beliefs and rituals seems to occur quite easily in some contexts, but post-supernaturalist cultures require a specific set of conditions that are difficult to produce and sustain on a large scale and thus are historically rare. Despite the worldwide resurgence of supernaturalist religion, some subcultures reliably produce people who deny the existence of supernatural entities. This social phenomenon has evoked competing explanations, many of which enjoy empirical support. We synthesize six of the most influential social-science explanations, demonstrating that they provide complementary perspectives on a complex causal architecture. We incorporate this theoretical synthesis into a …

Rehabilitation Of Low Rise Rcc Structure Along 9m High Retaining Wall, Aniruddha Nakhawa Er, Vivek Deshmukh Dr

International Conference on Durability of Concrete Structures

Mumbai is the financial, commercial and entertainment capital of India, facing bigger challenges in accommodating its over growing population day by day. The Mumbai City has population of 18.4 million over its 634 km2 area, ie. Almost 350 ft2/person. This enormous rise in population density has restricted the development to expand vertically. This also, results in growth of major slums, which is almost 62% of the population dwelling in slums. Subsequently, the authorities is in need of a large scaled Slum Sanitation Program, which utilize the scarcely available land for construction of Community Toilet Blocks with involvement of NGO’s and …

Sustainable Solutions, Fall/Winter 2020, Issue 41

Sustain Magazine

No abstract provided.

Exploratory Study On Applying Systems Thinking To Examine Safety In Navy / Coast Guard / Commercial Shipping Operations, Seth Anthony Dzakpasu

World Maritime University Dissertations

No abstract provided.

Seeing A Better World From Space, Carly Sakumura

Purdue GIS Day

Understanding change is essential to addressing our most pressing global challenges. Organizations need actionable insight to make critical decisions that affect communities, economies, and national security. As a global leader of advanced geospatial and space-based technology solutions, Maxar has an unprecedented ability to observe, analyze, and monitor these global changes. In this talk, I’ll discuss the cutting-edge research, technological capabilities, and imagery products and analytics we develop at Maxar to unlock the power of geospatial data to understand and navigate our changing world.

Strategic Implications For The United States Of The Belt And Road Initiative In Africa, Alec Monnie

Independent Study Project (ISP) Collection

The belt and road initiative is one of the most significant developments of the twenty-first century, which the United States will need to learn to adapt to. Much of the academic literature regarding the belt and road initiative mentions that Africa is a significant participant in this policy development, but fail to elaborate as to why that is, or what the implications for this are for the United States. This article expands upon the strategic significance of the African continent, and explains the implications thereof for the United States and China. This article argues that the belt and road initiative …

Mining’S Impact On Environmental And Human Health: A Case Study Of Ramba County’S Gold Mine, Vivika Fernes

Independent Study Project (ISP) Collection

This research project aims to gain a greater understanding of the health implications that Ramba County’s goldmine has on miners, their families, and the environment. While this study observes the community-at-large, inclusive of visiting miners and extended family members of workers, it will focus on women who engage in artisanal and small-scale gold mining (ASGM). Millions of people in the developing word depend on ASGM for their livelihood, evident in this case study in Ramba County. However, while gold is associated with wealth, there is great irony in the fact that those working within the mining industry are being exploited …

Climate Change, Spring/Summer 2007, Issue 16

Sustain Magazine

No abstract provided.

Global Sustainability, Fall/Winter 2005, Issue 11

Sustain Magazine

No abstract provided.

Environmental Justice, Spring/Summer 2004, Issue 10

Sustain Magazine

No abstract provided.