Engineering Commons^™

A Log-Based Method For Evaluating The Tar Yield Of Tar-Rich Coal, Tian Han, Li Ning, Wang Shuangming, Wu Hongliang, Feng Zhou, Wang Kewen, Wang Guiwen

Coal Geology & Exploration

Objective As a kind of coal-based oil and gas resource, tar-rich coal is significant for the supply of oil and gas resources, as well as the clean and efficient utilization of coals. Presently, the identification of tar-rich coals primarily depends on the Gray-King assay. In contrast, there is a lack of studies on the accurate identification and evaluation of tar-rich coal using geophysical methods. Methods This study investigated coals in the Jurassic Xishanyao and Badaowan Formations in Santanghu Basin, Xinjiang. Based on petrophysical experiments, as well as the typical log response characteristics of tar-rich coal, this study developed a new …

A Method For Predicting The Tar Yield Of Tar-Rich Coals Based On The Bp Neural Network Using Multiple Indicators Of Coal Petrography And Coal Quality, Qiao Junwei, Wang Changjian, Zhao Hongchao, Shi Qingmin, Zhang Yu, Fan Qi, Wang Duo, Yuan Dandan

Coal Geology & Exploration

Objective Tar yield, the most important coal quality parameter for coal utilization through low-temperature pyrolysis, determines the clean utilization of tar-rich coals. However, various constraints result in limited test data on tar yield in the geological exploration stage of coals, substantially restricting the fine-scale assessment and efficient utilization of tar-rich coals. Methods To achieve more scientific and accurate fine-scale tar-rich coal assessments, this study examined 1073 sets of lithotype and coal quality data obtained previously from a Jurassic coalfield in northern Shaanxi. From these data, 141 sets with 20 lithotype and coal quality parameters regarding macerals, proximate analysis, ultimate analysis, …

Performance Of Carbon Foams Based On Heavy Tar Produced By Tar-Rich Coal Pyrolysis, Zhang Lei, Liu Chunjiang, Song Ruikang, Wang Qi, Chen Ya, Huang Pengcheng

Coal Geology & Exploration

Objective Preparing graphitized foam materials using heavy tar produced by the pyrolysis of tar-rich coals plays a significant role in the high-value utilization of tar-rich coal resources. Methods This study aims to prepare high-performance carbon foam materials by investigating the relationships between various reaction conditions and carbon foam performance. First, using mesophase asphalt prepared with heavy tar as the precursor, carbon foams were developed via the high-temperature self-foaming method. Then, the effects of different reaction temperatures, heating rates, and reaction pressures on the performance of coal tar-based carbon foams were examined. Finally, quadratic multinomial regression equations were established using Box-Behnken …

07.08.2024 Orsp Connect, Liz Williamson

ORED Newsletter

NSF research infrastructure, IDS (Institute for Data Science), NSF Mentoring Plan Requirement, NSF Pilot for Startups and Small Businesses

Deep Integration Of Technological Innovation And Industrial Innovation In Modern Industrial System: Inspiration From Global New Generation Lithography Systems, Jiang Yu, Feng Chen, Yue Guo

Bulletin of Chinese Academy of Sciences (Chinese Version)

Utilizing technological innovation to lead the construction of a modern industrial system is a strategic choice for seizing the opportunities of the new round of technological revolution and industrial transformation. It is also a necessary step for winning the strategic initiative towards high-level self-reliance and self-improvement. Technological innovation is the intrinsic driving force behind industrial innovation, and industrial innovation is the value embodiment of technological innovation. The deep integration of technological innovation and industrial innovation is the key to constructing and improving a modern industrial system. Taking the global extreme ultra-violet (EUV) lithography system as an example, based on the …

Insights On Strategy And Approach For China To Construct A Modern Integrated Circuits Industrial System, Ximing Yin, Beibei Zhang, Tailun Chen, Jiang Yu, Jin Chen

Bulletin of Chinese Academy of Sciences (Chinese Version)

The integrated circuit (IC) industry is highly complex and systematic, and its key core technology breakthroughs are highly dependent on the support of systematic capabilities. The West especially the United States has accelerated the promotion of the “small-yard, high-fence” strategy, the “New Washington Consensus”, the “de-risking”, and other systematic policies to curb China’s rise. China’s IC industry chain is facing extreme risks such as rupture or blockage. Meanwhile, facing the new mission and requirements of Chinese modernization and new-quality productivity, China needs to accelerate the modernization of the IC industry with new development paradigms, new strategies, and new approaches. Based …

Strategic Study On Leading Construction Of Modern Agricultural System By Technology Innovation, Yan Yan, Xurong Mei, Xiudong Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Technology innovation is the fundamental solution to build a modern agricultural system, and it is also an important support for building the large base, large enterprise, and large industry of modern agriculture and achieving the modernization of material equipment, technology, management, agricultural informatization, and sustainable resource utilization of agriculture. This paper explains the scientific concepts and logical relationships of the agricultural production system, industrial system and management system, which are the main components of a modern agricultural system. It emphasizes that ensuring food security, promoting industrial integration and upgrading, and cultivating leading enterprises are current key tasks. Nevertheless, from the …

Activity: Students Find Conceptual Errors In Ai Output, Janie Brennan

Generative AI Teaching Activities

Instructor asks ChatGPT questions related to a key concept to find one where ChatGPT has conceptual errors. Ask students to find the errors and explain them.

Corrigendum To “Evaluation Of Operational Performance Of Wusongkou Cruise Port Through Network Data Envelopment Analysis”

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Analysis Of The Potential For Enhancing The Efficiency Of A Floating Photovoltaic (Fpv) System, How-Ping Wu, Ching-Yi Tseng, Chuan-Chung Jen, Yuan-Ching Chiang, Sih-Li Chen

Journal of Marine Science and Technology–Taiwan

This study examined the power generation capabilities of FPV systems and the advantages of employing active cooling on floating solar panels. Floating solar panels exhibit improved efficiency due to operating at lower temperatures facilitated by the cooling effect of water evaporation. Additionally, the high availability of water renders the application of the active cooling technique economically viable. This study developed a comprehensive simulation of a floating solar system, integrating a mathematical model to validate experimental findings and a temperature model derived from an energy equation specific to floating solar panels. This model calculates the heat transfer among the three different …

Effective Position Intelligent Decision Method Based On Model Fusion And Generative Network, Liqiang Guo, Liang Ma, Hui Zhang, Jing Yang, Lianfeng Li, Yaqi Zhai

Journal of System Simulation

Abstract: Military intelligence technology is currently the most dynamic frontier and the inevitable trend for the development of unmanned equipment in the future. Aiming at the dual requirements of reliability and real-time performance of unmanned platform autonomous decision-making in complex environments and the shortcomings of existing combat simulation technology based on rule reasoning in terms of dynamics and flexibility, a research method of principle analysis and experimental verification is adopted. Based on the shooting experiment dataset of an unmanned platform, the effective position recognition link of attack decision-making is transformed into a binary classification problem with imbalanced categories in the …

Digital Twin Modeling And Control Of Robots For Intelligent Manufacturing Scenarios, Ying Li, Lan Gao, Zhisong Zhu

Journal of System Simulation

Abstract: The introduction of Industry 4.0 and the Made in China 2025 development policy has accelerated the transformation of the manufacturing industry from automation to intelligence. Industrial robots, as the representative equipment of intelligent manufacturing, will also become more intelligent. Based on digital twin technology, digital modeling, and simulation debugging are conducted for such problems as interference and collision, tedious operation, and low efficiency of industrial robot spot welding debugging in production. Process Simulate from TECNOMATIX software is utilized to digitally model the robot spot welding station and define its motion, and TIA Portal and S7-PLCSIM Advanced are applied to …

Research On Learnable Wargame Agent Driven By Battle Scheme, Yifeng Sun, Zhi Li, Jiang Wu, Yubin Wang

Journal of System Simulation

Abstract: To enable the agent to cope with complex battle scenarios and objectives in wargame, a learnable wargame agent architecture driven by a battle scheme is proposed. By analyzing the "attachment characteristics" and "loose coupling characteristics" of the agent to wargame system, the learnable requirements of the agent are obtained. In the design of the agent framework, battle schemes are used to reduce the learning range of the agent. The finite state machine corresponds to the knowledge of the operational phase in the battle scheme, and the decision-making space of the agent is determined according to the framework of the …

A Deep Fuzzy Classifier Based On Feature Transform And Reconstruction, Rui Yin, Wei Lu, Jianhua Yang

Journal of System Simulation

Abstract: To obtain a classifier with good classification accuracy and interpretability, a deep fuzzy classifier based on feature transform and reconstruction (FR-DFC) is proposed. In FR-DFC, several fuzzy systems (FT_FS) for feature transform and a multi-prototype fuzzy classification system (MPRFD_FS) are stacked together to realize the classification process of the model, based on the hierarchically stacked thought originated from deep learning. Specifically, the stacked FT_FSs explore the hidden features in the data by transferring data from the original data space to the high-level feature space. MPRFD_FS, on the other hand, implements classification based on multiple prototypes that characterize the distribution …

Adaptive Particle Swarm Optimization Algorithm Based On Trap Label And Lazy Ant, Wei Zhang, Yuefeng Jiang

Journal of System Simulation

Abstract: Many existing strategies for improving particle swarm optimization (PSO) fall short in assisting particles trapped in local optima and experiencing premature convergence to recover optimization performance. In response, an adaptive particle swarm optimization algorithm based on trap label and lazy ant (TLLA-APSO) is proposed. Firstly, the trap label strategy dynamically adjusts particle velocities, enabling the particle swarm to escape from local optima. Secondly, the lazy ant optimization strategy is employed to diversify particle velocity and enhance population diversity. Finally, the inertia cognition strategy introduces historical position into velocity updates, promoting path diversity and particle exploration while effectively mitigating the …

Simulation Optimization Of Airport Baggage Import System Based On Multi-Objective Wolf Pack Algorithm, Yifei Tao, Xiaopeng Ding, Junbin Luo, Xiao Fu, Jiaxing Wu, Yirong Li

Journal of System Simulation

Abstract: Aiming at the problems of long waiting time for passenger baggage import and high system energy consumption during the operation of the baggage import system in civil aviation airports, a simulation optimization framework for solving this problem is proposed by comprehensively considering the influence of key control parameters on the operation efficiency of the baggage import system in airports, including the virtual window control mode, the operation speed of the collection belt conveyor, the length of the virtual window and the number of check-in counters opened at the same time. By analyzing the actual operating conditions of the airport …

Task Analysis Methods Based On Deep Reinforcement Learning, Xue Gong, Pengfei Peng, Li Rong, Yalian Zheng, Jun Jiang

Journal of System Simulation

Abstract: In response to the high coupling of task interaction and many influencing factors in task analysis, a task analysis method based on sequence decoupling and deep reinforcement learning (DRL) is proposed, which can achieve task decomposition and task sequence reconstruction under complex constraints. The method designs an environment for deep reinforcement learning based on task information interaction, while improving the SumTree algorithm based on the difference between the loss functions of the target network and the evaluation network, achieving the priority evaluation among tasks. The activation function operation mechanism is introduced into the deep reinforcement learning network, followed by …

Modeling And Verification Of Cooperative Vehicle Infrastructure System At Unsignalized Intersection Based On Time Automata, Wei Liu, Qirui Xiao, Xinhai Chen, Chang Rao, Yu Zhang, Bosi Wang

Journal of System Simulation

Abstract: Cooperative vehicle infrastructure system (CVIS) is one of the advanced solutions to enhance intersection vehicle passage safety. Due to the lack of clear specifications and standards regarding the dynamic timing and transition processes of system object state interaction in existing CVIS technologies, ensuring the safety of passage control logic is challenging. This study utilizes formal language to describe the functional logic of CVIS in unsignalized intersections, verifying the safety of system object state interaction and control logic to improve vehicle passage safety at unsignalized intersections. Simulations are conducted for scenarios including single-vehicle non-conflict, dual-vehicle conflict, and multi-vehicle conflict to …

Real-Time Non-Photorealistic Rendering Method For Black And White Comic Style In Games And Animation, Yan Hu, Lizhe Chen, Hanna Xie, Yuyao Ge, Shun Zhou, Xingquan Cai

Journal of System Simulation

Abstract: To address the issues of high resource consumption and lengthy workflow in general nonphotorealistic, this paper proposes a real-time non-photorealistic rendering method for black and white comic style in games and animation. A specialized lighting model is designed to highlight the main environmental light and the grayscale grading of diffuse reflection based on the analysis of the lighting model effect. The pre-processing of the scene is achieved by merging the various components of the lighting model. A screen space three-phase edge detection method is proposed to sequentially perform depth edge detection, normal edge detection, and color edge detection on …

Simulation System For Carrier-Based Aircraft Ammunition Support Scheduling, Zhe Liu, Jiafeng Chen, Junfei Ma, Songhua Ma

Journal of System Simulation

Abstract: For inefficient scheduling of carrier-based aircraft ammunition support on the flight deck of aircraft carriers, a Unity3D-based 3D virtual demonstration method for carrier-based aircraft ammunition scheduling is proposed, and a 3D virtual simulation system for carrier-based aircraft ammunition scheduling on the flight deck of aircraft carriers is constructed. A problem model targeted at carrierbased aircraft ammunition transportation and loading scheduling process as well as processing rules for path determination, sequence constraint, and loading position compensation are established based on the defining system. An optimal solution for the scheduling process is realized by using the improved discrete grey wolf optimizer …

Uav Path Planning Based On Improved Harris Hawk Algorithm And B-Spline Curve, Zhifeng Huang, Yuanhua Liu

Journal of System Simulation

Abstract: Aiming at the global path planning problem of unmanned aerial vehicles (UAVs) in dynamic environments, this paper proposes an improved Harris Hawk optimization algorithm. To address the problem of insufficient search performance in the later stage of the algorithm, an adaptive chaos and core population dynamic partitioning strategy is proposed to improve the searchability of the algorithm in the later stage. The Harris Hawk update formula is modified, and the golden sine strategy is introduced to improve the search efficiency of the algorithm. Then, an adaptive dynamic cloud optimal solution perturbation strategy is integrated to improve the ability of …

Optimal Scheduling Of Vehicle-Network Interaction Based On Interval Stackelberg Game Of Virtual Power Plant, Weiliang Liu, Qianwen Yan, Qiliang Zhang, Shuai Liu, Changliang Liu, Jiayao Kang, Xin Wang

Journal of System Simulation

Abstract: To better exploit the regulation potential of electric vehicles (EVs), resolve the conflicts of interest among the stakeholders in vehicle-to-grid (V2G) interactions, and overcome the uncertainty of distributed energy sources and load, this paper proposes a two-level optimization scheduling model for V2G interactions based on the interval Stackelberg game of a virtual power plant (VPP). The VPP aggregator is considered as the upper level, and the EV users as the lower level. The upper level model uses interval numbers to describe the uncertainty of sources and loads, with the aim of minimizing the operating cost of the VPP aggregator, …

Maglev Ball Control Algorithm Based On Levant Differentiator, Zhenli Zhang, Yongzhuan Wang, Yao Qin, Jie Yang

Journal of System Simulation

Abstract: To solve the problem of unsatisfactory control effect of permanent magnet electromagnetic hybrid suspension system caused by signal mutation and noise interference, the control method ILevant- PID, the combination of an improved Levant differentiator and PID, is proposed. The proposed method combines the strong adaptability of PID control and the robust characteristic of Levant differentiator on input noise to solve the chattering problem of the system output. The simulated anneal-particle swarm optimization is utilized to solve the constraints of the ILevant-PID controller, such as multiple parameters and strong correlation. The simulation results show that compared with the traditional PID …

Real-Time Scheduling Method For Dynamic Flexible Job Shop Scheduling, Quan Jiang, Jingxuan Wei

Journal of System Simulation

Abstract: A multi-objective dynamic flexible job shop scheduling problem model with machine breakdown and random jobs arrival is constructed to address the interference of dynamic events in manufacturing processing on the scheduling scheme, and a real-time scheduling method with multiobjective proximal policy optimization (MPPO) algorithm is proposed. The MPPO algorithm trains two agents, routing agent (RA) and sequencing agent (SA), for real-time scheduling and real-time processing of dynamic events. It employs a linear combination of weight vectors and reward vectors as reward signals and stores the agents' parameters for each weight vector to optimize multiple objectives. The required state information, …

Path Planning For Mobile Robot Based On Angle Search, Yaru Wang, Dexin Yao, Zengli Liu, Yi Peng

Journal of System Simulation

Abstract: The angle search algorithm for angle-controlled robots is proposed to increase the path search speed and optimize the path length. The algorithm effectively finds a path in static surroundings by performing an efficient search in a specific dimensional range based on the position of the robot and the target point. Firstly, search angles are predetermined according to the characteristics of the environment in the grid map. Then, the estimated angle of the robot's surrounding grid is computed. Finally, a new extension point is chosen by comparing the estimated angle to the search angle, demonstrating the usefulness and viability of …

Digital Application Of Equipment System Test And Evaluation Based On Digital Twin And Parallel Experiment Theory, Hongjie Dang, Wenguang Yu, Huahui Yang

Journal of System Simulation

Abstract: With the development of equipment systematization, traditional test with real equipment can not meet the requirements of Test and Evaluation(T&E), especially for complex equipment. As the main digital methods in current, digital twins and parallel experiments can support the digital application in the field of equipment Test and Evaluation. This paper makes a comparative analysis of the two digital technology means, extracts their technical connotation and characteristics, and then integrates them to explore the application mode, application time and application occasions in the field of equipment T&E. Taking the satellite for example, by constructing the digital architecture of equipment …

Interaction Between Virus Transmission Variation And Population Crossover Activity And Diffusion Model, Lei Yu, Xichou Zhu, Huaming Liao, Jiafeng Guo, Xueqi Cheng

Journal of System Simulation

Abstract: In view of the current high incidence of human-to-human infectious viruses, a multi-agent simulation and deduction model was proposed and designed based on the random characteristics of virus transmission variation and the influence of population crossover activity. The external pathogenicity and infectious characteristics of the virus and the external activities and immune characteristics of the human were quantified, and the interdependence and confrontation process between the virus and the human were modeled. The development trends and statistical characteristics of a large number of viruses and humans were deduced through the model. The experimental analysis reveals that the randomness of …

Exploration Of Semiconductor Gain Medium, Resonator, Pump, And Frequency Stabilization For Laser Guide Star Applications, Mingyang Zhang

Optical Science and Engineering ETDs

Laser Guide Star (LGS) systems are essential for adaptive optics in ground-based astronomical observation. This dissertation demonstrates the feasibility of semiconductor-based LGS systems using the membrane external-cavity surface-emitting laser (MECSEL) platform, employing multiple quantum wells. Various laser cavity configurations were analyzed through simulations and experiments. The in-well pumping method was explored to reduce the quantum defect and address thermal limitations. Multi-pass pumping schemes were designed with Zemax modeling and demonstrated experimentally. To simplify multi-pass pumping, the hybrid-MECSEL (H-MECSEL) design was introduced. COMSOL modeling studied thermal management and thermal lensing effect.

The H-MECSEL achieved approximately 30 W of output power at …

Decision-Making Considering Power Consumption And Preference For New Energy Under Dual-Credit Policy, Fang Li, Tianhao Dong

Journal of System Simulation

Abstract: To explore the production decision-making problem of the electrification transformation in the domestic automobile industry faced by automobile manufacturers, different decision-making models under two production scenarios are constructed for the secondary supply chain composed of manufacturers and retailers under the background of a dual-credit policy. The electric energy consumption of new energy vehicles and consumers' preference for new energy are introduced. The Stackelberg game is applied to obtain the optimal production decision and income analysis of each member in the supply chain under different decision modes in different production scenarios. The results show that the in-depth implementation of the …

Employing Interactive Architecture Techniques In Architectural Design Methodologies To Retrieve Ancient Egyptian Identity, Dina Elwy Aly Hamed Hussein Dr. Lobna Abd-Allah Abd-Elfattah Agha , Dr. Azza Sobhi Ragab Elsakka

Journal of Engineering Research

Architectural projects often rely on modern technologies like smart architecture and environmental treatments, neglecting the principles and philosophy that reflect civilization, ideas, culture, and traditions. This leads to short-lived buildings that depend on these technologies without any purpose of preserving them. Technicians must constantly renew technology to improve production and without benefits, as threats of superior artificial intelligence have been warned, that autonomous machines may perform tasks without programmers understanding how to reach this level. Instead of relying solely on environmental or smart technology, we should make technology serve the design idea rather than relying solely on it. Considering this, …