Engineering Commons^™

The Electroformation Of Lithium-Lead Alloys From Molten Electrolytes, Thomas Prater

Bachelors Theses and Reports, 1928 - 1970

An attempt was made to make lead-lithium alloys by electrodeposition of lithium using a molten bath and a molten lead cathode.The variables taken into consideration were: composition of the melt, temperature of the melt, and current density. The purpose of changing these factors was to determine what effect each had on the current efficiency.

Ground Water In The Lake Basin Field And Adjacent Area, Herman Neibauer

Bachelors Theses and Reports, 1928 - 1970

This thesis consists of studying the stratigraphic and structural features of the Lake Basin Field and an adjacent area with special emphasis upon the ground water conditions present.

Oil And Gas Production Methods In Montana, Edgar A. Scholz

Bachelors Theses and Reports, 1928 - 1970

Montana's oil and gas industries aggregate a gross income of over 12,000,000 annually to the state. Oil and gas fields have been thoroughly discussed in liter­ature as to geology, location, production and future possibilities. The specific object of this report has been to compile a comprehensive study of the production methods as they occur.

The Geology And Ore Deposits Of The Ermont Mines, James L. Kelly

Bachelors Theses and Reports, 1928 - 1970

The Ermont Mines are located sixteen miles northwest of Dillon, Montana, in section 35 of T.6S., R.11W. This is in the central part of Beaverhead County. They are considered to be in the Argenta min­ing district, the town of Argenta lying three miles to the northeast.

The Concentration Of Scheelite From The Gold Concentrates Of The Jardine Mining Company, John H. Huxley

Bachelors Theses and Reports, 1928 - 1970

The Purpose of this thesis was to investigate the possibility of concentrating scheelite from Wilfley table gold concentrates from the mill of the Jardine Mining Company; and to determine whether such concentration is economically feasible and the product of sufficiently high grade to meet commercial specifications for such a product.

The Testing And Concentration Of Lake Chelan Copper Ore, Thor W. Johnson

Bachelors Theses and Reports, 1928 - 1970

The geologic history of the Holden area and Lake Chelan district is an integral part of the history of the Cascade Mountain Range. The structure is very complex and the rocks, which have been subjected to intense metamorphic action, are portions of a roof pendant and consists of gneisses, schists and quartzites that are often difficult to correlate.

Gas Analysis By Absorption, Albert D. Mcmahon

Bachelors Theses and Reports, 1928 - 1970

There is practically only one method of gas analysis. This was worked out many years ago by Bunsen, Hempel, and Winkler and consists in the successive absorption with different chemicals of the various constituents of the gas. The only improvement to this method is the oxidation and combustion of different components of a mixture followed by absorption.

Relationships Of Manganese Minerals In The Butte District, Charles F. Parent

Bachelors Theses and Reports, 1928 - 1970

The use of manganese in the steel industry as a deoxidizing and desulfidizing agent makes it a necessity in modern industry, while the various alloy steels using manganese for the quality of toughness are also indispensable. Manganese is also used in the manufacture of such various articles as battery cells, paints and glass.

Pegmatites In Southwestern Montana, Ora Rostad

Bachelors Theses and Reports, 1928 - 1970

Little has been written on pegmatites in Montana except in conjunction with reports on mining districts. This subject was chosen as a senior thesis to see what facts could be ascertained re­garding pegmatites alone, and an attempt has been made by the writer to assemble all written material on pegmatites in southwestern Montana, and to study specimens from those that could be reached or from which specimens were available.

A Study Of The Concentration Of A Low-Grade Manganese Ore From The Ennis District, John B. Schuettenhelm

Bachelors Theses and Reports, 1928 - 1970

The purpose of the investigation was to determine the most effective means of concentrating the manganese in the ore. The study was that of identification of the minerals present. This showed the presence of oxides of manganese and iron, and carbonates of calcium and manganese. Methods of investigation were planned to determined whether the ore could be concentrated effectively by gravity concentration methods. ­

Test 369: Mccormick-Deering Model W-9 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 368: Mccormick-Deering Farmall Model Md (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 375: Oliver Row Crop 60 Hc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

A Study Of A Carbonaceous Gold Ore, James S. Huckaba

Bachelors Theses and Reports, 1928 - 1970

The presence of graphite in the ore of the Missouri-McKee Mine has made its treatment by the methods now used quite unsatisfactory. The study was undertaken to de­velop a new flow sheet which would give a high recovery and yet be economical enough to handle low grade material.

Test 373: John Deere La, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere LA

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 367: Case Model Sc (Distillate), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 371: Mccormick-Deering Model W-9 (Distillate), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 372: International Tractractor Model T-9 (Gasoline) (Wide Tread), Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 376: Massey-Harris Model 81-R, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 374: Caterpiller Model D-6 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 377: Massey-Harris Model 101-R, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 378: John Deere Ar, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere AR

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Advertising Brochure: Case Sc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 370: Mccormick-Deering Model Wd-9 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 366: John Deere B, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere B

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

A Geological Report On An Area Five Miles Southeast Of Renova, Montana, And On An Area Seven Miles South Of Jefferson Island, Montana, Herman Neibauer

Bachelors Theses and Reports, 1928 - 1970

This trip was conducted to give those students working for their respective degrees an excellent opportunity to work under actual field conditions. A total of three weeks was taken to complete the required work. Two weeks were spent in the field gathering data, and making maps, and the last week was spent in the drawing room at the college preparing the final map.

The Age-Hardening Of Aluminum With Mgzn2, Sidney E. Worthen

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to investigate the age-hardening of aluminum with magnesium and zinc in such proportions as to conform to the compound MgZn₂.

Because of a lack of time and proper equipment, the only property investigated was the hardness as indicated by the Rockwell Superficial Hardness Tester.

The Investigation Of Different Variables In The Assaying Of Silver Cyanide Solution, Warren M. Mahan

Bachelors Theses and Reports, 1928 - 1970

The assaying of gold and silver cyanide solutions is by no means new. The first method of analysis which is given in the literature is an evaporation method by S. B. Christy in 1896. However, the fire assaying of gold and silver dates further back than this. There is a method of fire assaying for gold and silver given in literature as early as 1556 in Georgius, Agricola’s De Re Metallica book.

The Measurement Of Current Efficiency In Zinc Sulphate Electrolytes Containing Antimony And Cobalt By Hydrogen Evolution, Arthur R. Hard

Bachelors Theses and Reports, 1928 - 1970

The measurement of current efficiency by hydrogen evolution is based on the assumption that the portion of the current which deposits no zinc will release hydrogen. This assumption is correct for solutions containing no impurities electropositive to zinc.

The Geology And Mineralogy Of The Independence Mining District, Alan Kuhlman

Bachelors Theses and Reports, 1928 - 1970

From 1888 until 1893 the district was a booming mining camp. Seven stamp mills were running and ore was be­ing mined from the Independence, King Solomon, Poorman, Golden, Hidden Treasure and Crown claims. The town of Independence, which was on the Boulder River at the fork of Basin Creek, boasted a population of 400 people.