Engineering Commons^™

Test 1715: Belarus 532 And 530 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1714: Case Ih 9380 Diesel 12-Speed (Chassis S/N Jee0036501 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1719: White 6215 Diesel 18-Speed (Chassis S/N 602001pl And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Nebraska Summary: S253 New Holland 8560, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Vegetative Filter Strip Design For Grassed Areas Treated With Animal Manures, Dwayne R. Edwards, Tommy C. Daniel, Philip A. Moore Jr.

Biosystems and Agricultural Engineering Faculty Publications

Vegetative filter strips (VFS) are a low-cost management option that have been demonstrated to be effective in reducing runoff transport of fertilizer constituents applied to grassed areas (pasture or meadow). Runoff quality studies involving fertilizers applied to grassed areas suggest that VFS can be designed by assuming that (1) only infiltration is responsible for pollutant removal, (2) the first post-application runoff event is most important from a water quality perspective (enabling a design event approach), and (3) no pollutant build-up that degrades VFS performance will occur. The purpose of this study was to develop a VFS design algorithm for grassed …

A Direct, Approximate Solution To The Modified Green-Ampt Infiltration Equation, Puneet Srivastava, Thomas A. Costello, Dwayne R. Edwards

Biosystems and Agricultural Engineering Faculty Publications

Accurately predicting the rainfall-runoff process is of vital importance for water quality models as well as for correct design of various types of hydraulic structures. This article presents a method of describing the cumulative infiltration process as an explicit function of time using an approximation to the modified Green-Ampt equation given by Mein and Larson (1971). The resulting equation is helpful in predicting cumulative infiltration and therefore infiltration capacity for computer simulation models. The proposed method takes about 50% less time than the usual iterative technique for the same degree of accuracy. The maximum error due to approximation was 1% …

Simulation Of Runoff Transport Of Animal Manure Constituents, Yang Wang, Dwayne R. Edwards, Tommy C. Daniel, H. Don Scott

Biosystems and Agricultural Engineering Faculty Publications

Runoff losses of land-applied animal manure constituents can adversely affect the quality of downstream waters. Reliable mathematical simulation models can help estimate runoff losses of animal manure constituents and identify management measures to reduce these losses. The objective of this study was to develop and calibrate an event-based simulation model to describe the runoff transport of solids (soil and manure particles) and nutrients (nitrogen and phosphorus) from areas treated with animal manure. The resulting model, consisting of linked hydrology, soil/manure transport, and nutrient transport components, is process-oriented and uses measurable parameters to the greatest degree possible. The three components of …

Quality Of Runoff From Four Northwest Arkansas Pasture Fields Treated With Organic And Inorganic Fertilizer, Dwayne R. Edwards, Tommy C. Daniel, John F. Murdoch, Philip A. Moore Jr.

Biosystems and Agricultural Engineering Faculty Publications

Long-term land application of animal manures, even at agronomic rates, can promote accumulation of soil phosphorus (P) which can, in turn, contribute to increased P loadings to downstream waters. The objective of this study was to assess the soil and runoff effects of replacing animal manure as a soil amendment with inorganic fertilizer (ammonium nitrate, NH₄NO₃) on fields that had been treated previously with animal manures. Runoff from two pairs of small fields (0.57 to 1.46 ha) was sampled from September 1991 to April 1994. All fields had been treated previously with animal manures; after runoff …

Poultry Litter-Treated Length Effects On Quality Of Runoff From Fescue Plots, Dwayne R. Edwards, Philip A. Moore Jr., Tommy C. Daniel, Puneet Srivastava

Biosystems and Agricultural Engineering Faculty Publications

Using experimental data and/or mathematical simulation models to identify practices that reduce pollution from manure-treated areas is sometimes perceived as limited by the unknown validity of extrapolating plot-scale data to larger areas and by uncertainties in modeling transport of various pollutants. The objectives of this study were to assess the effect of length of manure treatment on runoff concentrations of poultry litter constituents and to define the modes of transport (particulate versus soluble) for nitrogen (N), phosphorus (P), carbon (C), and solids. Poultry litter was applied to three 1.5- x 18.3-m fescue (Festuca arundinacea Schreb.) plots with runoff collection …

Application Of Simplified Phosphorus Transport Models To Pasture Fields In Northwest Arkansas, Dwayne R. Edwards, C. T. Haan, Andrew N. Sharpley, John F. Murdoch, Tommy C. Daniel, Philip A. Moore Jr.

Biosystems and Agricultural Engineering Faculty Publications

Runoff transport of phosphorus (P) is often predicted from simple equations with parameters determined from data applicable primarily to row-cropped and fallow cover conditions. The applicability, accuracy, and precision of such P transport prediction equations under pasture situations are less well defined. The objectives of this study were to determine parameters of simplified runoff P transport equations for pasture fields and to assess the accuracy and precision of the equations. Runoff, sediment yield, soluble P transport, and particulate P transport data were collected from four pasture fields in northwestern Arkansas. Runoff event enrichment ratios and extraction coefficients were computed, and …

Nebraska Summary: S218 New Holland 8670, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S259 Case-Ih Mx 135, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1706: Caterpiller Challenger 65d Diesel 10-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1711: Case Ih 7240 Diesel 18-Speed (Chassis S/N Jja 0065000 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1712: Case Ih 7250 Diesel 18-Speed (Chassis S/N Jja0065000 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1716: Belarus 900, 905, 920 And 925 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1721: Agcostar 8425 Diesel 18-Speed (Cummins Engine), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1710: Case Ih 7230 Diesel 18-Speed (Chassis S/N Jja0065000 And Higher), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1633: Valmet 8550 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Surface Debye Temperature Measurement With Reflection High-Energy Electron Diffraction, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Measurement of the surface mean-square atomic vibrational amplitude, or equivalently the surface Debye temperature, with reflection high-energy electron diffraction is discussed. Low-index surfaces of lead are used as examples. Particular details are given about the temperature-dependent diffraction pattern of Pb(100) in the Debye-Waller region. The use of reflection high-energy electron diffraction for measurement of the substrate surface temperature in thin-film deposition chambers is suggested. © 1996 American Institute of Physics.

Electrodeposition Of Copper Indium Sulfide Films From Organic Solutions, Arif Raza, Robert Engelken, Brandon Kemp, Imran Khan, Wasim Aleem, Chris Barber

Journal of the Arkansas Academy of Science

We report on organic solutions ofCuCl 2 ,InClg, and elemental sulfur for electrodepositing CuIn x Sv films. CuInS 2 and CuInSe 2 are promising solar cellmaterials; our work on CuInSg prefaces planned work on plating CuInSe 2 from nonaqueous solvents. Two promising solvent systems are (1) mixed propylcne carbonate and water and (2) mixed ethylene glycol, propionic acid, and water (Engelken et al., 1988). Gray-brown films ofCuInx Sy (nominally GuInS2 ) have been plated from both baths. Major problems include (1) reduction ofCu+2 to Cu and Cu x S by the solvent at high temperatures (T>l()0°C), hence depleting Cu+2,(2) …

Simulator For The Performance Analysis Of Cpm Schemes In An Indoor Wireless Environment, Ronald Chua

Theses : Honours

A software simulator for characterising Continuous Phase Modulation (CPM) schemes in an indoor multipath environment has been developed using SIMULINK and MATLAB. The simulator is capable of simulating a wide range of CPM schemes to determine bandwidth efficiency and robustness to additive white Gaussian noise (AWGN) and Rician fading. Initial trials of the simulator indicate that the simulator is functioning correctly. Eventually, the simulator will be used to determine the most suitable modulation scheme for the development of an actual indoor wireless system.

Galvanostatic Pulse And Pulse Reverse Plating Of Zinc-Nickel Alloys From Sulfate Electrolytes On A Rotating Disc Electrode, Branko N Popov, M. Ramasubramanian, S. N. Popova, Ralph E. White, K-M. Yin

Faculty Publications

Galvanostatic pulse and pulse reverse techniques have been used to study the plating of zinc–nickel alloys in the presence of nonyl phenyl polyethylene oxide. The effects of average current density, rotation speed of disc electrode and the presence of nonyl phenyl polyethylene oxide in the electrolyte on deposition of zinc–nickel alloys were evaluated. Zinc–nickel plating bath solution chemistry was studied by determining the equilibrium concentrations at various pH levels. It was found that the alloy composition was determined by solution equilibria, mass transfer of the electroactive species within the diffusion layer and by the surface coverage of nonyl phenyl polyethylene …

Combinatorial Approaches For Hard Problems In Manpower Scheduling, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Manpower scheduling is concerned with the construction of a workers' schedule which meets demands while satisfying given constraints. We consider a manpower scheduling Problem, called the Change Shift Assignment Problem(CSAP). In previous work, we proved that CSAP is NP-hard and presented greedy methods to solve some restricted versions. In this paper, we present combinatorial algorithms to solve more general and realistic versions of CSAP which are unlikely solvable by greedy methods. First, we model CSAP as a fixed-charge network and show that a feasible schedule can be obtained by finding disjoint paths in the network, which can be derived from …

On The Complexity Of Manpower Shift Scheduling, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We consider the shift assignment problem in manpower scheduling, and show that a restricted version of it is NP-hard by a reduction from 3SAT. We then present polynomial algorithms to solve special cases of the problem and show how they can be deployed to solve more complex versions of the shift assignment problem. Our work formally defines the computational intractibility of manpower shift scheduling and thus justifies existing works in developing manpower scheduling systems using combinatorial and heuristic techniques.

Randomized Approximation Of The Constraint Satisfaction Problem, Hoong Chuin Lau, Osamu Watanabe

Research Collection School Of Computing and Information Systems

We consider the Weighted Constraint Satisfaction Problem (W-CSP) which is a fundamental problem in Artificial Intelligence and a generalization of important combinatorial problems such as MAX CUT and MAX SAT. In this paper, we prove non-approximability properties of W-CSP and give improved approximations of W-CSP via randomized rounding of linear programming and semidefinite programming relaxations. Our algorithms are simple to implement and experiments show that they are run-time efficient.

Mechanical Alloying Of Nitrogen Into Iron Powders, J. Rawers, D. Govier, D. C. Cook

Physics Faculty Publications

Mechanical alloying of nitrogen into bcc-fe powder is a very effective and efficient means of obtaining very high concentration of nitrogen in micron-size iron particles. Mechanical alloying increases the concentration of nitrogen in the iron powder far in excess of the bcc-Fe lattice low nitrogen solubility, however most of the infused nitrogen resides on the nano-size grain boundaries and in nano-size bct-fe that forms during mechanical alloying.

Automatic Pcb Inspection Algorithms: A Survey, Madhav Moganti, Fikret Ercal, Cihan H. Dagli, Shou Tsunekawa

Computer Science Faculty Research & Creative Works

The importance of the inspection process has been magnified by the requirements of the modern manufacturing environment. In electronics mass-production manufacturing facilities, an attempt is often made to achieve 100% quality assurance of all parts, subassemblies, and finished goods. A variety of approaches for automated visual inspection of printed circuits have been reported over the past two decades. In this survey, algorithms and techniques for the automated inspection of printed circuit boards are examined. A classification tree for these algorithms is presented and the algorithms are grouped according to this classification. This survey concentrates mainly on image analysis and fault …

Simulation Of Asynchronous Instruction Pipelines, Chia-Hsing Chien, Mark A. Franklin

All Computer Science and Engineering Research

This paper presents the ARAS simulator with which asynchronous instruction pipelines can be modelled, simulated and displayed. ARAS allows one to construct instruction pipelines by preparing various configuration files. Using these files and a number of benchmark programs, performance of the instruction pipelines can be obtained. The performance of asynchronous instruction pipelines can also be compared to synchronous case. Thus, one can decide the optimal design for instruction pipelines in asynchornous or synchronous cases and explore the deisng space of asynchronous instruction pipeline architectures.

Optimal Solution Of Off-Line And On-Line Generalized Caching, Saied Hosseini-Khayat, Jerome R. Cox

All Computer Science and Engineering Research

Network traffic can be reduced significantly if caching is utilized effectively. As an effort in this direction we study the replacement problem that arises in caching of multimedia objects. The size of objects and the cost of cache misses are assumed non-uniform. The non-uniformity of size is inherent in multimedia objects, and the non-uniformity of cost is due to the non-uniformity of size and the fact that the objects are scattered throughout the network. Although a special case of this problem, i.e. the case of uniform size and cost, has been extensively studied, the general case needs a great deal …