Engineering Commons^™

Well Characteristics Influencing Microscopic Particulate Analysis Risk Index, Robert Christopher Sharek

Retrospective Theses and Dissertations

Cryptosporidium parvum is a common surface water contaminant that can cause illness in human beings. The presence of this etiological agent in groundwater identifies the groundwater as under the direct influence (GWUDI) of surface water. Currently the determination of GWUDI water sources requires an expensive, labor-intensive laboratory procedure called the Microscopic Particulate Analysis (MPA). The results of the MPA provide a risk index that rates the degree of surface water contamination. The objective of this study is to identify other methods of identifying GWUDI of surface waters, such as well characteristics and hydrogeologic factors which may contribute to higher MPA …

Nebraska Summary: S282 New Holland 9482, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S502 Kubota M9000dt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1899: Case Ih Cx 100/Case Ih C100/Mccormick C 100 & Cx 100 & Cx 105 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1815: New Holland 9482 Quadrasync Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1779: Challenger Mt 425 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary 276: Massey Ferguson 4325 And 4225 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 277: Massey-Ferguson 4235 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 289: John Deere 6310 Powrquad Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 300: Massey Ferguson 6245 Diesel 32-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1899: Case Ih Cx 100/C 100 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1745: John Deere 8200t Dieel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1746: John Deere 8300t Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1749: Caterpiller Challenger 75e Diesel 10-Speed`, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1750: Caterpiller Challenger 85e Diesel 10-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1753: White 8410 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1757: John Deere 5510 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Object-Oriented Computer Simulations Of Physical Systems Using Dual Reciprocity Boundary Element Methodology, J. Friedrich

Turkish Journal of Electrical Engineering and Computer Sciences

Models of physical systems are essential in every engineering field. This work deals with computer simulations of physical systems that can be mathematically modelled by differential equations together with sufficient boundary conditions. The computer simulations are based on object-oriented technology and the dual reciprocity boundary element method which is a universal solution scheme for various types of partial differential equations (e.g. Laplace, Poisson, diffusion, convection-diffusion, and steady Navier-Stokes equation). This technique fulfills efficiency criteria like precision, robustness, versatility, programmability, user-friendliness, need of computational time and computer memory to a very high degree. This is demonstrated by three examples: Laplace's solution …

Distribution System Planning Usign Mixed Integer Programming, Belgin Türkay

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents an improved mathematical model to optimise the size and locations of substations and the network routing problem. The model was formulated to minimise the total cost of the network by determining the optima of the substation locations and power, the load transfers between the demand centers, the feeder routes and the load flow in the network subject to a set of constraints. The computational results of a devised sample problem indicate that the developed optimisation model and its code are adequate for computer aided planning of distribution systems.

Analysis Of Nonlinear Sustained Oscillations In Discrete Systems With Backlash And Resolution By Using A Discretization-Oriented Describing Function, M. De La Sen, A. Pena, J. Esnaola

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a discretization-oriented describing function is derived for nonlinear devices combining backlash and quantization (resolution) while being subject to discretization through a sampler and zero-order hold. Such a describing function is frequency-dependent so that the overall nonlinearity, which includes both resolution and backlash, is interpreted as possessing nonlinear inertia. That nonlinear inertia is generated by the sampling process, since it does not appear if the system is continuous. The presence of nonlinear sustained oscillations (limit cycles) is investigated through simulations.

Signal Injection With Perceptual Criteria, T. Engi̇n Tuncer

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a novel method for increasing the coding performance and information transmission capacity is presented. This method is mainly based on perceptual modelling of input signal such as speech or audio. Presented approach may be seen as an alternative to transforms which dynamically change analysis window for better energy compaction. A perceptual model is established in order to obtain a global masking threshold in frequency below which sounds become inaudible. Certain criteria are developed for identifying the signal injection bands. A new multiband filter design method which is a generalization of windowing method is used to separate the …

State Of Art In Realistic Head Modeling For Electro-Magnetic Source Imaging Of The Human Brain, Nevzat G. Gençer, İ. Oğuz Tanzer, M. Kemal Özdemi̇r, Can E. Acar, Mert Sungur

Turkish Journal of Electrical Engineering and Computer Sciences

Electric currents produced by the neural activity in the brain create electric potentials on the scalp and magnetic field distribution outside the scalp. Measuring electric and magnetic fields provides a means to understand the spatio-temporal distribution of the neural activity. The representations of the intracellular electric current of active cell populations based on bimodal data are called electro-magnetic source image (EMSI). With the recent development of large arrays of magnetic sensors, and systems for measuring scalp voltages at more than 100 locations, it is now feasible to implement computational methods that employ numerical models which incorporate the correct geometry and …

Surface Morphology Of Laser-Superheated Pb(111) And Pb(100), Z. H. Zhang, Bo Lin, X. L. Zeng, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The surface step density on the vicinal Pb(111) and the surface vacancy density on Pb(100) after laser superheating and melting are investigated using reflection high-energy electron diffraction. With ∼100-ps laser pulses, Pb(111) surface superheating does not significantly change the density of the steps and step-edge roughness. However, after laser surface melting, the average terrace width and the string length at the step edge become as large as those at room temperature. The average terrace width at 573 K changes from 38±15 to 64±19 Å after laser surface melting, while the average string length at the step edge changes from 90±14 …

Femtosecond Photoemission Study Of Ultrafast Electron Dynamics In Single-Crystal Au(111) Films, J. Cao, Y. Gao, H. E. Elsayed-Ali, R. J. D. Miller, D. A. Mantell

Electrical & Computer Engineering Faculty Publications

The energy-dependent relaxation of photoexcited electrons has been measured by time-resolved two-photon photoemission spectroscopy on single-crystal Au(111) films with thickness ranging from 150 to 3000 Å. It is found that the energy-dependent relaxation does not show any significant thickness dependence, which indicates that electron transport is a much slower dynamical process in the near-surface region than expected from bulk properties. Furthermore, lifetimes of the photoexcited electrons can be fitted well by the Fermi-liquid theory with a scaling factor plus an effective upper lifetime. This observation enables separation of electron-electron scattering, and to a lesser extent electron-phonon scattering, processes from electron-transport …

Adaptive Shape From Shading, Ati̇lla Gülteki̇n, Muhi̇tti̇n Gökmen

Turkish Journal of Electrical Engineering and Computer Sciences

Extracting surface orientation and surface depth from one or more images is one of the classic problems in computer vision. Shape-from-shading (SFS) deals with the recovery of 3-D shape from a single shaded image. The shape is recovered by minimizing an energy functional involving constraints such as smoothness. In this constrained problem, although the smoothness constraint helps to stabilize the minimization process, it pushes the reconstruction toward a smooth surface. In this paper, we present a new adaptive shape-from-shading method which reduces this oversmoothing by controlling the smoothness spatially over the image space. In order to improve the quality of …

A Parallel Pipelined Computer Architecture For Digital Signal Processing, Haluk Gümüşkaya, Bülent Örenci̇k

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a parallel pipelined computer architecture and its six network configurations targeted for the implementation of a wide range of digital signal processing (DSP) algorithms described by both atomic and large grain data flow graphs. The proposed architecture is considered together with programmability, yielding a system solution that combines extensive concurrency with simple programming. It is an SSIMD (Skewed Single Instruction Multiple Data) or MIMD (Multiple Instruction Multiple Data) machine depending on the algorithms implemented and the programming methodologies. The concurrency that can be exploited by the algorithms using this Parallel pipelined architecture is both temporal and spatial …

Hierarchical Interconnection Network Architecture For Real-Time Systems, Bülent Örenci̇k

Turkish Journal of Electrical Engineering and Computer Sciences

A hierarchical network suitable for interconnection of real-time client processes in a distributed multiprocessor environment is presented in this paper. A multi-layer {\it Communication Unit} (CU) prototype is developed for this purpose. This unit offers the client processes communication services for real-time operation. These services are structured in such a way that they do not depend on the characteristics of the communication medium. The basic hardware of the CU consists of a PC compatible card connected to the VME Bus. Client processes run on target cards (Motorola MVME-162) which are attached to the same bus. Target cards together with a …

Imaging Tissue Conductivity Via Contactless Measurements: A Feasibility Study, Nevzat G. Gençer, M. Nejat Tek

Turkish Journal of Electrical Engineering and Computer Sciences

The feasibility of a new imaging system is investigated. This system will be used to image electrical conductivity distribution of biological tissues via contactless measurements. This will be achieved by introducing currents in the conductive medium using time-varying magnetic fields and measuring the magnetic fields of the induced currents. Consequently, the imaging system consists of transmitter and receiver coils placed nearby the conductive body. In this study, the basic features of the coplanar and coaxial coils are studied. The validity of the simplifying assumptions for the governing field equations is investigated. It is found that, for operating frequency of 100 …

Hazardous Waste Determination And Government Enforcement Actions In The Resource Conservation And Recovery Act And The Law No. 24051: Comparison Between The United States And Argentina, Eduardo Jose Conghos

LLM Theses and Essays

The incremental generation and disposal of hazardous waste, causing severe environmental pollution, has become one the world’s most important ecological problems starting with the Stockholm Conference in 1972. This paper examines two legislative reactions to pollution caused by hazardous wastes in the United States, under the Resource Conservation and Recovery Act 1976 (RCRA), and Argentina, in Law No. 24051. This paper makes a comparative analysis of the material provisions of both the RCRA and the Law with emphasis on the tools and actions provided for the enforcement of the RCRA and the Law. The paper concludes that the RCRA and …

Copyright Protection Of Software, Severine Desimpelaere

LLM Theses and Essays

Computer technology has developed within the last decades with many advancements which require intellectual property protections. This thesis addresses the need for the legal protection of software by the vast body of copyright laws. This thesis examines the history, nature, textual and practical compositions of copyright laws and their adaptability to computer technology. The thesis further analyses the scope of copyright protection with emphasis on the Computer Software Copyright Act of 1980 (CSCA), the regime of international conventions for the protection of software as well as other statutory protections for the owners and users of the software. The thesis concludes …