Engineering Commons^™

A Proposal For A High-Performance Active Hardware Architecture, Tilman Wolf

All Computer Science and Engineering Research

Current research in Active Networking is focused on developing software architectures and defining funtionality of Execution Environments. While active network systems show superior functionality compared to traditional networks, they only operate at substantially lower link speeds. To increase the acceptance of Active Network in environments where link speeds of several Gb/s are common, we propose a hardware architecture that performs high-speed packet handling while providing the same flexibility as a common software system. The design exploits the independence between data streams for parallel processing. To measure the impact of different design decisions on the performance of the system, we also …

Anmac: A Novel Architectural Framework For Network Management And Control Using Active Networks, Samphel Norden

All Computer Science and Engineering Research

In this paper, we propose a new framework called Active Network Management and Control (ANMAC) for the management and control of high speed networks. The software architecture in ANMAC allows routers to execute dynamically loadable kernel plug-in modules which perform diagnostic functions for network management. ANMAC uses mobile probe packets to perform efficient resource reservation (using our novel reservation scheme), facilitate feedback-based congestion control, and to provide "distributed debugging" of complex anomalous network behavior. ANMAC also provides security measures against IP spoofing, and other security attacks. The network manager has the flexibility to install custom scripts in routers for tracking …

Reliable Communication For Highly Mobile Agents, Amy L. Murphy, Gian Pietro Picco

All Computer Science and Engineering Research

The provision of a reliable communication infrastructure for mobile agents is still an open research issue. The challenge to reliability we address in this work does not come from the possibility of faults, but rather from the mere presence of mobility, which slightly complicates the problem of ensuring the delivery of information even in a fault-free network. For instance, the asynchronous nature of message passing and agent migration may cause situations where messages forever chase a mobile agent that moves frequently from one host to another. Current solutions rely on conventional technologies that either do not provide a solution for …

Multiway Range Trees: Scalable Ip Lookup With Fast Updates, Subhash Suri, George Varghese, Piryank Ramesh Warkhede

All Computer Science and Engineering Research

Internet routers forward packets based on the destination address of a packet. A packet's address is matched against the destination prefixes stored in the router's forwarding table, and the packet is sent to the output interface determined by the longest matching prefix. While some existing schemes work well for IPv4 addresses, we believe that none of the current schemes scales well to IPv6, especially when fast updates are required. As the Internet evolves into a global communication medium, requiring multiple addresses per user, the switch to longer addresses (e.g. IPv6) seems inevitable despite temporary measures such as network addres translation …

An Algorithm For Optimal Winner Determination In Combinatorial Auctions, Tuomas Sandholm

All Computer Science and Engineering Research

Combinatorial auctions, i.e. auctions where bidders can bid on combinations of items, tend to lead to more efficient allocations than traditional auctions in multi-item auctions where the agents' valuations of the items are not additive. However, determining the winners so as to maximize revenue is NP-complete. First, existing approaches for tackling this problem are reviewed: exhaustive enumeration, dynamic programming, approximation algorithms, and restricting the alloable combinations. Then we present our search algorithm for optimal winner determination. Experiments are shown on several bid distributions. The algorithm allows combinatorial auctions to scale up to significantly larger numbers of items and bids than …

A Fine-Grained Model For Code Mobility, Cecilia Mascolo, Gian Pietro Picco, Gruia-Catalin Roman

All Computer Science and Engineering Research

In this paper, we take the extreme view that every line of code is potentially mobile, i.e., may be duplicated and/or moved from one program context to another on the same host or across the network. Our motivation is to gain a better understanding of the range of constructs and issues facing the designer of a mobile code system, in a setting that is abstract and unconstrained by compilation and performance considerations traditionally associated with programming language design. Incidental to our study is an evaluatoin of the expressive power of Mobile UNITY, a notation and proof logic for mobile computing.

Design Issues For High Performance Active Routers, Tilman Wolf, Jonathan Turner

All Computer Science and Engineering Research

Active networking is a general approach to incorporating general-purpose computational capabilities within the communications infrastructure of data networks. This paper proposes a design of a scalable, high performance active router. This is used as a vehicle for studying the key design issues that must be resolved to allow active networking to become a mainstream technology.

Terabit Burst Switching Progress Report (12/98-6-99), Jonathan S. Turner

All Computer Science and Engineering Research

This report summarizes progress on Washington University's Terabit Burst Switching Project, supported by DARPA and Rome Air Force Laboratory. This project seeks to demonstrate the feasibility of Burst Switching, a new data communication service which can more effectively exploit the large bandwidths becoming available in WDM transmission systems, than conventional communication technologies like ATM and IP-based packet switching. Burst switching systems dynamically assign data bursts to channels in optical data links, using routing information carried in parallel control channels. The project will lead to the construction of a demonstration switch with throughput exceeding 200 Gb/s and scalable to over 10 …

Floor Control Protocol For Alx Video Conference Application, Ruibiao Qiu

All Computer Science and Engineering Research

With wide deployment of high-speed networks such as vBNS today, video-conference applications over WANs have become increasingly feasible. MMX has proven to be a good desktop video-conference devide for local ATM networks. Now, ALX has been designed to extend MMX's video conferencing capability to IP-over-ATM WANs such as vBNS. In this report, we discuss a floor control protocol for ALX video-conference applications. We first show how an "ideal" protocol should behave to meet our requirements. Then we compare three protocols based on distributed algorithms, and a protocol based on a centralized algorithm. Based on the comparison and performance analysis, we …

Constructing Speculative Demand Functions In Equilibrium Markets, Tuomas Sandholm, Fredrik Ygge

All Computer Science and Engineering Research

In computational markets utilizing algorithms that establish a general equilibrium, competitive behavior is usually assumed: each agent makes its demand (supply) decisions so as to maximize its utility (profit) assuming that it has no impact on market prices. However, there is a potential gain from strategic behavior via speculating about others because an agent does affect the market prices, which affect the supply/demand decisions of others, which again affect the market prices that the agent faces. Determining the optimal strategy when the speculator has perfect knowledge about the other agents is a well known problem which has been studied in …

Software Engineering For Mobility: A Roadmap, Gruia-Catalin Roman, Gian Pietro Picco, Amy L. Murphy

All Computer Science and Engineering Research

The term distributed computing conjures the image of a fixed network structure whose nodes support the execution of processes that communicate with each other via messages traveling along links. Peer-to-peer communication is feasible but client-server relationships dominate. More recently, servers have been augmented with brokerage capabilities to facilitate discovery of available services. Stability is the ideal mode of operation; changes are relatively slow; even in the case of failure, nodes and links are expected eventually to come back up. By contrast, mobility represents a total meltdown of all the stability assumptions (explicit or implicit) associated with distributed computing. The network …

Nebraska Summary: S294 New Holland Ts90, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1886: New Holland Tv-140 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Tests 1860 & 1861: Challenger Mt 535 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary 319: Massey Ferguson 8240 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Enterprise Business Objects : Design And Implementation Of A Business Object Framework, Kai-Uwe Schafer

Theses

Software components representing business entities like customer or purchase order introduce a new way of Online Transaction Processing to business applications. Collaborating business objects allow to complete whole business processes as a single distributed transaction, instead of dividing it into queued steps, which sometimes even require user intervention. This IS due to the fact that business objects contain both business data and logic and that they incorporate multiple databases from different vendors and different geographic locations in a single transaction.

Business objects cannot be used as stand-alone components, but require a framework of services that manage persistence, concurrent transactions, and …

Aneuploidy Frequencies In Semen Fractions From Ten Oligoasthenoteratozoospermic Patients Donating Sperm For Intracytoplasmic Sperm Injection, Jerome Pfeffer, Myung-Geol Pang, Stanton F. Hoegerman, Christopher J. Osgood, M. W. Stacey, Jacob Mayer, Sergio Oehninger, William G. Kearns

Biological Sciences Faculty Publications

Objective: To determine aneuploidy frequencies in pellet and swim-up semen fractions from 10 infertile men with severe oligoasthenoteratozoospermia (OAT) who were donating sperm for intracytoplasmic sperm injection and to determine whether the swim-up isolation method would successfully separate aneuploid from haploid sperm.

Design: Prospective study.

Setting: Infertility clinic and molecular genetics laboratory.

Patient(s): Ten patients with severe OAT.

Intervention(s): Cytogenetic analyses by fluorescence in situ hybridization to determine aneuploidy frequencies for chromosomes 1, 13, 18, 21, X, and Y in sperm from swim-up and pellet fractions.

Main Outcome Measure(s): Gametic aneuploidy was scored in sperm fractions separated by the swim-up …

Dynamics Of Acrylic Coupling Agents At Interfaces Of Composites, Hyoryoon Jo, Frank D. Blum

Chemistry Faculty Research & Creative Works

Most applications of polymers involve composites, wherein a polymer is used in conjunction with another material, typically a solid fiber or filler. A coupling agent can enhance the adhesion between a polymer matrix and an inorganic filler. Organofunctional silanes, RSiX are often used as coupling agents. The methoxy or ethoxy group, X, can typically be hydrolyzed with water and an acid or a base catalyst in a protic solvent. The silanol groups of a hydrolyzed coupling agent can condense with other silanol groups from a glass surface, while the alkyl group, R, blends physically or bonds chemically to the polymer …

Nebraska Summary: S331 New Holland Tn65d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S503 Kubota M120dt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1766: Case Ih Mx 220 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Tests 1912 & 1913: New Holland Tl 70 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Tests 1897 & 1904: New Holland Tn 75d/New Holland Tn 75s Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary 304: Massey Ferguson 6280 Diesel 32-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 318: Massey Ferguson 8220 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Tractor Test 1763: White 6710 Also Agco Allis 8775 (Cummins Engine) Also Agco Rt95, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Differentiating Type Of Muscle Movement Via Ar Modeling And Neural Network Classification, Beki̇r Karlik

Turkish Journal of Electrical Engineering and Computer Sciences

The aim of this study is to classify electromyogram (EMG) signals for controlling multifunction proshetic devices. An artificial neural network (ANN) implementation was used for this purpose. Autoregressive (AR) parameters of $a_1, a_2, a_3, a_4$ and their signal power obtained from different arm muscle motions were applied to the input of ANN, which is a multilayer perceptron. At the output layer, for 5000 iterations, six movements were distinguished at a high accuracy of 97.6%.

Surface Resistance Measurements Of Superconducting Niobium Samples With A Triaxial Cavity, Paul Martin Boccard

Physics Theses & Dissertations

This experimental study has revealed and investigated many of the physical issues that affect accurate measurement of the surface resistance for small samples consisting of superconducting niobium films on copper substrates. It is believed that this work provides the groundwork for future research directed towards solving this important problem. Accurate measurement of surface resistance for such samples is needed to allow the rapid evaluation and optimization of the deposition parameters necessary for manufacturing low-loss superconducting niobium films.

A superconducting niobium triaxial cavity was investigated to determine its suitability for measuring the residual surface resistance of copper samples that were sputter-coated …

Time-Resolved Reflection High-Energy Electron Diffraction Study Of The Ge(111)-C(2×8)-(1×1) Phase Transition, Xinglin Zeng, Bo Lin, Ibrahim El-Kholy, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The dynamics of the Ge(111)-c(2×8)-(1×1) phase transition is investigated by 100-ps time-resolved reflection high-energy electron diffraction. A laser pulse heats the surface while a synchronized electron pulse is used to obtain the surface diffraction pattern. Slow heating shows that the adatoms in Ge(111)-c(2×8) start to disorder at ∼510 K and are converted to a disordered adatom arrangement at 573 K. For heating with 100-ps laser pulses, the Ge(111)-c(2×8) reconstructed adatom arrangement starts to disorder at 584±16K, well above the onset temperature of ∼510 K for the disordering of Ge(111)-c(2×8) observed for slow …

Light Aircraft Management System, Evan Karjalainen

Theses : Honours

This report details methods to construct a flight data logging system that can be used to manage student flight and aircraft maintenance records. These methods utilise GPS, embedded processors and associated software to depict the occurrence of landings, "Touch and Goes" and record aircraft total flight time. By manipulating these methods it was possible to produce a usable data-logging unit which facilitated the automation of flight maneuver recording. This datatogging unit was constructed from embedded components and interfaced with a user defined database. Perusal of the details within should provide the reader with a clear understanding of the tasks involved …